! Started logfile: J1828+0820_S_2017_04_28_pus_uvs.log on Thu May 2 16:31:31 2019 obs J1828+0820_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1828+0820_S_2017_04_28_pus_uva.fits ! AN table 1: 237 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.990436 visibilities/baseline/integration-bin. ! Found source: J1828+0820 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 42252 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1828+0820_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1196 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.991658Jy sigma=0.009563 ! Fit after self-cal, rms=0.964623Jy sigma=0.009324 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=7.278 mas, bpa=-3.749 degrees ! Estimated noise=1163.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0303062 Jy ! Component: 100 - total flux cleaned = 0.0369364 Jy ! Total flux subtracted in 100 components = 0.0369364 Jy ! Clean residual min=-0.002855 max=0.003502 Jy/beam ! Clean residual mean=-0.000002 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.0369364 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0369364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070656Jy sigma=0.000647 ! Fit after self-cal, rms=0.069645Jy sigma=0.000637 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=7.968 mas, bpa=-3.465 degrees ! Estimated noise=401.848 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141274 Jy ! Component: 100 - total flux cleaned = 0.00117096 Jy ! Component: 150 - total flux cleaned = 0.00103008 Jy ! Component: 200 - total flux cleaned = 0.00089544 Jy ! Total flux subtracted in 200 components = 0.00089544 Jy ! Clean residual min=-0.001373 max=0.001555 Jy/beam ! Clean residual mean=-0.000003 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.0378318 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 0.0378318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069557Jy sigma=0.000637 ! Fit after self-cal, rms=0.069509Jy sigma=0.000637 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.01 KP 0.96 ! LA 0.90 MK 1.04 NL 1.00 OV 1.03 ! PT 1.10 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.06 KP 1.00 ! LA 0.97 MK 0.95 NL 1.11 OV 1.10 ! PT 1.04 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.03 KP 0.99 ! LA 0.99 MK 1.03 NL 1.07 OV 0.97 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.97 HN 0.75 KP 1.00* ! LA 1.00* MK 0.86 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.069509Jy sigma=0.000637 ! Fit after self-cal, rms=0.068058Jy sigma=0.000635 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=7.843 mas, bpa=-3.227 degrees ! Estimated noise=398.026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369781 Jy ! Component: 100 - total flux cleaned = 0.000381088 Jy ! Component: 150 - total flux cleaned = 0.000372998 Jy ! Component: 200 - total flux cleaned = 0.000365728 Jy ! Total flux subtracted in 200 components = 0.000365728 Jy ! Clean residual min=-0.000831 max=0.000873 Jy/beam ! Clean residual mean=-0.000002 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.0381976 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.0381976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068055Jy sigma=0.000635 ! Fit after self-cal, rms=0.067984Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067984Jy sigma=0.000635 ! Fit after self-cal, rms=0.067679Jy sigma=0.000635 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=7.8 mas, bpa=-3.051 degrees ! Estimated noise=397.401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000227334 Jy ! Component: 100 - total flux cleaned = 0.000234807 Jy ! Component: 150 - total flux cleaned = 0.000228008 Jy ! Component: 200 - total flux cleaned = 0.000221786 Jy ! Total flux subtracted in 200 components = 0.000221786 Jy ! Clean residual min=-0.000830 max=0.000866 Jy/beam ! Clean residual mean=-0.000002 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.0384193 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.0384193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067677Jy sigma=0.000635 ! Fit after self-cal, rms=0.067669Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.1087e-05 Jy ! Component: 100 - total flux cleaned = 6.91351e-07 Jy ! Component: 150 - total flux cleaned = -5.62716e-06 Jy ! Component: 200 - total flux cleaned = -5.95109e-06 Jy ! Total flux subtracted in 200 components = -5.95109e-06 Jy ! Clean residual min=-0.000867 max=0.000862 Jy/beam ! Clean residual mean=-0.000002 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.0384134 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.0384134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067668Jy sigma=0.000635 ! Fit after self-cal, rms=0.067666Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067666Jy sigma=0.000635 ! Fit after self-cal, rms=0.067611Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=7.783 mas, bpa=-3.015 degrees ! Estimated noise=397.499 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111991 Jy ! Component: 100 - total flux cleaned = 0.000131066 Jy ! Component: 150 - total flux cleaned = 0.000142572 Jy ! Component: 200 - total flux cleaned = 0.000142811 Jy ! Total flux subtracted in 200 components = 0.000142811 Jy ! Clean residual min=-0.000863 max=0.000859 Jy/beam ! Clean residual mean=-0.000002 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.0385562 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.0385562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067610Jy sigma=0.000635 ! Fit after self-cal, rms=0.067609Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.60637e-05 Jy ! Component: 100 - total flux cleaned = 5.47292e-06 Jy ! Component: 150 - total flux cleaned = -4.14344e-06 Jy ! Component: 200 - total flux cleaned = -4.02313e-06 Jy ! Total flux subtracted in 200 components = -4.02313e-06 Jy ! Clean residual min=-0.000866 max=0.000845 Jy/beam ! Clean residual mean=-0.000002 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.0385522 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.0385522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067609Jy sigma=0.000635 ! Fit after self-cal, rms=0.067608Jy sigma=0.000635 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067608Jy sigma=0.000635 ! Fit after self-cal, rms=0.067599Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.157 mas, bmaj=11.23 mas, bpa=-1.844 degrees ! Estimated noise=510.239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.22617e-05 Jy ! Component: 100 - total flux cleaned = 6.99129e-05 Jy ! Component: 150 - total flux cleaned = 6.28764e-05 Jy ! Component: 200 - total flux cleaned = 6.28192e-05 Jy ! Total flux subtracted in 200 components = 6.28192e-05 Jy ! Clean residual min=-0.000810 max=0.000956 Jy/beam ! Clean residual mean=-0.000005 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.038615 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.038615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067598Jy sigma=0.000635 ! Fit after self-cal, rms=0.067596Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.21595e-05 Jy ! Component: 100 - total flux cleaned = -3.54205e-06 Jy ! Component: 150 - total flux cleaned = -6.84671e-06 Jy ! Component: 200 - total flux cleaned = -1.01008e-05 Jy ! Total flux subtracted in 200 components = -1.01008e-05 Jy ! Clean residual min=-0.000803 max=0.000945 Jy/beam ! Clean residual mean=-0.000005 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.0386049 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.0386049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067596Jy sigma=0.000635 ! Fit after self-cal, rms=0.067595Jy sigma=0.000635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=7.774 mas, bpa=-3.002 degrees ! Estimated noise=397.693 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.011 x 7.774 at -3.002 degrees (North through East) ! Clean map min=-0.00082028 max=0.039773 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.634 mas, bmaj=7.126 mas, bpa=-3.415 degrees ! Estimated noise=1136.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0310015 Jy ! Component: 100 - total flux cleaned = 0.0377813 Jy ! Component: 150 - total flux cleaned = 0.0382334 Jy ! Component: 200 - total flux cleaned = 0.0380405 Jy ! Total flux subtracted in 200 components = 0.0380405 Jy ! Clean residual min=-0.002926 max=0.002895 Jy/beam ! Clean residual mean=-0.000001 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.0380405 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0380405 Jy ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=7.774 mas, bpa=-3.002 degrees ! Estimated noise=397.693 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000557375 Jy ! Component: 100 - total flux cleaned = 0.000695213 Jy ! Component: 150 - total flux cleaned = 0.000733804 Jy ! Component: 200 - total flux cleaned = 0.000750688 Jy ! Total flux subtracted in 200 components = 0.000750688 Jy ! Clean residual min=-0.000961 max=0.000818 Jy/beam ! Clean residual mean=-0.000002 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.0387912 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.0387912 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.157 mas, bmaj=11.23 mas, bpa=-1.844 degrees ! Estimated noise=510.239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131045 Jy ! Component: 100 - total flux cleaned = -0.000125112 Jy ! Component: 150 - total flux cleaned = -0.00012543 Jy ! Component: 200 - total flux cleaned = -0.000125226 Jy ! Total flux subtracted in 200 components = -0.000125226 Jy ! Clean residual min=-0.000827 max=0.000986 Jy/beam ! Clean residual mean=-0.000005 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.038666 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.17265e-08 Jy ! Component: 100 - total flux cleaned = 4.72797e-06 Jy ! Component: 150 - total flux cleaned = 4.67096e-06 Jy ! Component: 200 - total flux cleaned = 4.98803e-06 Jy ! Total flux subtracted in 200 components = 4.98803e-06 Jy ! Clean residual min=-0.000821 max=0.000972 Jy/beam ! Clean residual mean=-0.000005 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.038671 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.038671 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=7.774 mas, bpa=-3.002 degrees ! Estimated noise=397.693 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.86098e-05 Jy ! Component: 100 - total flux cleaned = 4.92397e-05 Jy ! Component: 150 - total flux cleaned = 5.75273e-05 Jy ! Component: 200 - total flux cleaned = 6.41769e-05 Jy ! Total flux subtracted in 200 components = 6.41769e-05 Jy ! Clean residual min=-0.000873 max=0.000822 Jy/beam ! Clean residual mean=-0.000002 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.0387352 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.0387352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067596Jy sigma=0.000635 ! Fit after self-cal, rms=0.067597Jy sigma=0.000634 wmodel J1828+0820_S_2017_04_28_pus_map.mod ! Writing 40 model components to file: J1828+0820_S_2017_04_28_pus_map.mod wobs J1828+0820_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1828+0820_S_2017_04_28_pus_uvs.fits wwins J1828+0820_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J1828+0820_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000286277 Jy ! Component: 100 - total flux cleaned = -0.000399558 Jy ! Component: 150 - total flux cleaned = -0.000439618 Jy ! Component: 200 - total flux cleaned = -0.000476655 Jy ! Component: 250 - total flux cleaned = -0.000511394 Jy ! Component: 300 - total flux cleaned = -0.000522462 Jy ! Component: 350 - total flux cleaned = -0.00057662 Jy ! Component: 400 - total flux cleaned = -0.000639119 Jy ! Component: 450 - total flux cleaned = -0.000669161 Jy ! Component: 500 - total flux cleaned = -0.000688657 Jy ! Component: 550 - total flux cleaned = -0.000707496 Jy ! Component: 600 - total flux cleaned = -0.000716857 Jy ! Component: 650 - total flux cleaned = -0.000725878 Jy ! Component: 700 - total flux cleaned = -0.000734778 Jy ! Component: 750 - total flux cleaned = -0.000760625 Jy ! Component: 800 - total flux cleaned = -0.000760538 Jy ! Component: 850 - total flux cleaned = -0.000768948 Jy ! Component: 900 - total flux cleaned = -0.000768985 Jy ! Component: 950 - total flux cleaned = -0.000784754 Jy ! Component: 1000 - total flux cleaned = -0.000784786 Jy ! Component: 1050 - total flux cleaned = -0.000784683 Jy ! Component: 1100 - total flux cleaned = -0.000799713 Jy ! Component: 1150 - total flux cleaned = -0.000777512 Jy ! Component: 1200 - total flux cleaned = -0.000806691 Jy ! Component: 1250 - total flux cleaned = -0.000799584 Jy ! Component: 1300 - total flux cleaned = -0.000820888 Jy ! Component: 1350 - total flux cleaned = -0.00082791 Jy ! Component: 1400 - total flux cleaned = -0.000841639 Jy ! Component: 1450 - total flux cleaned = -0.000861787 Jy ! Component: 1500 - total flux cleaned = -0.000881697 Jy ! Component: 1550 - total flux cleaned = -0.000888241 Jy ! Component: 1600 - total flux cleaned = -0.000914355 Jy ! Component: 1650 - total flux cleaned = -0.000946514 Jy ! Component: 1700 - total flux cleaned = -0.000965512 Jy ! Component: 1750 - total flux cleaned = -0.000990531 Jy ! Component: 1800 - total flux cleaned = -0.000990498 Jy ! Component: 1850 - total flux cleaned = -0.00099667 Jy ! Component: 1900 - total flux cleaned = -0.00102084 Jy ! Component: 1950 - total flux cleaned = -0.00100283 Jy ! Component: 2000 - total flux cleaned = -0.000996967 Jy ! Component: 2050 - total flux cleaned = -0.000991186 Jy ! Component: 2100 - total flux cleaned = -0.00101443 Jy ! Component: 2150 - total flux cleaned = -0.000991399 Jy ! Component: 2200 - total flux cleaned = -0.000991433 Jy ! Component: 2250 - total flux cleaned = -0.000991469 Jy ! Component: 2300 - total flux cleaned = -0.00097464 Jy ! Component: 2350 - total flux cleaned = -0.000958063 Jy ! Component: 2400 - total flux cleaned = -0.000963623 Jy ! Component: 2450 - total flux cleaned = -0.000952622 Jy ! Component: 2500 - total flux cleaned = -0.000925435 Jy ! Component: 2550 - total flux cleaned = -0.000909225 Jy ! Component: 2600 - total flux cleaned = -0.000887802 Jy ! Component: 2650 - total flux cleaned = -0.000893148 Jy ! Component: 2700 - total flux cleaned = -0.000877208 Jy ! Component: 2750 - total flux cleaned = -0.000856113 Jy ! Component: 2800 - total flux cleaned = -0.000835191 Jy ! Component: 2850 - total flux cleaned = -0.000804063 Jy ! Component: 2900 - total flux cleaned = -0.000783454 Jy ! Component: 2950 - total flux cleaned = -0.000773275 Jy ! Component: 3000 - total flux cleaned = -0.000758013 Jy ! Component: 3050 - total flux cleaned = -0.000737744 Jy ! Component: 3100 - total flux cleaned = -0.000722698 Jy ! Component: 3150 - total flux cleaned = -0.000717658 Jy ! Component: 3200 - total flux cleaned = -0.00069777 Jy ! Component: 3250 - total flux cleaned = -0.000677978 Jy ! Component: 3300 - total flux cleaned = -0.000643556 Jy ! Component: 3350 - total flux cleaned = -0.000633784 Jy ! Component: 3400 - total flux cleaned = -0.000609468 Jy ! Component: 3450 - total flux cleaned = -0.000594972 Jy ! Component: 3500 - total flux cleaned = -0.000580542 Jy ! Component: 3550 - total flux cleaned = -0.000571024 Jy ! Component: 3600 - total flux cleaned = -0.000566291 Jy ! Component: 3650 - total flux cleaned = -0.000537925 Jy ! Component: 3700 - total flux cleaned = -0.000547327 Jy ! Component: 3750 - total flux cleaned = -0.000533291 Jy ! Component: 3800 - total flux cleaned = -0.000510009 Jy ! Component: 3850 - total flux cleaned = -0.000491465 Jy ! Component: 3900 - total flux cleaned = -0.000468413 Jy ! Component: 3950 - total flux cleaned = -0.000468421 Jy ! Component: 4000 - total flux cleaned = -0.00043182 Jy ! Component: 4050 - total flux cleaned = -0.000427271 Jy ! Total flux subtracted in 4096 components = -0.000409115 Jy ! Clean residual min=-0.000286 max=0.000294 Jy/beam ! Clean residual mean=-0.000000 rms=0.000078 Jy/beam ! Combined flux in latest and established models = 0.0383261 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 289 components and 0.0383261 Jy ![Exited script file: muppet] wmap "J1828+0820_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.011 x 7.774 at -3.002 degrees (North through East) ! Clean map min=-0.0006431 max=0.039517 Jy/beam ! Writing clean map to FITS file: J1828+0820_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0395166 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 7.4057e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.562222 0.562222 1.12444 2.24889 4.49778 8.99556 17.9911 35.9822 71.9645 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.039 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.011 x 7.774 at -3.002 degrees (North through East) ! Clean map min=-0.0006431 max=0.039517 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1828+0820_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:31:37 2019