! Started logfile: J1827-4533_S_2017_07_16_pus_uvs.log on Thu May 9 11:15:45 2019 obs J1827-4533_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1827-4533_S_2017_07_16_pus_uva.fits ! AN table 1: 62 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.232975 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1827-4533 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 2600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1827-4533_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 342 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 331 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 397 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 620 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.817882Jy sigma=0.004801 ! Fit after self-cal, rms=0.774028Jy sigma=0.004547 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.119 mas, bmaj=7.71 mas, bpa=-3.541 degrees ! Estimated noise=7152.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159464 Jy ! Component: 100 - total flux cleaned = 0.205792 Jy ! Total flux subtracted in 100 components = 0.205792 Jy ! Clean residual min=-0.019427 max=0.025656 Jy/beam ! Clean residual mean=-0.000101 rms=0.006054 Jy/beam ! Combined flux in latest and established models = 0.205792 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.205792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138483Jy sigma=0.000796 ! Fit after self-cal, rms=0.138349Jy sigma=0.000795 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=11.63 mas, bpa=-4.807 degrees ! Estimated noise=3165.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.050325 Jy ! Component: 100 - total flux cleaned = 0.0736309 Jy ! Component: 150 - total flux cleaned = 0.0845989 Jy ! Component: 200 - total flux cleaned = 0.0897729 Jy ! Total flux subtracted in 200 components = 0.0897729 Jy ! Clean residual min=-0.011668 max=0.014126 Jy/beam ! Clean residual mean=0.000133 rms=0.003752 Jy/beam ! Combined flux in latest and established models = 0.295565 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.295565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120719Jy sigma=0.000696 ! Fit after self-cal, rms=0.120320Jy sigma=0.000694 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.01 ! LA 1.03 MK 0.96 NL 1.00* OV 1.02 ! PT 0.95 SC 1.06 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.11 ! LA 0.96 MK 1.23 NL 1.00* OV 1.06 ! PT 0.93 SC 1.02 ! ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.95 ! LA 1.00* MK 0.93 NL 1.00* OV 0.94 ! PT 0.91 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.120320Jy sigma=0.000694 ! Fit after self-cal, rms=0.121497Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=11.5 mas, bpa=-4.919 degrees ! Estimated noise=3262.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135856 Jy ! Component: 100 - total flux cleaned = -0.00151249 Jy ! Component: 150 - total flux cleaned = -0.00151123 Jy ! Component: 200 - total flux cleaned = -0.00146927 Jy ! Total flux subtracted in 200 components = -0.00146927 Jy ! Clean residual min=-0.009784 max=0.012786 Jy/beam ! Clean residual mean=0.000037 rms=0.002958 Jy/beam ! Combined flux in latest and established models = 0.294096 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.294096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121451Jy sigma=0.000678 ! Fit after self-cal, rms=0.121610Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121610Jy sigma=0.000678 ! Fit after self-cal, rms=0.122459Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=11.42 mas, bpa=-4.995 degrees ! Estimated noise=3276.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000988338 Jy ! Component: 100 - total flux cleaned = 0.000866986 Jy ! Component: 150 - total flux cleaned = 0.000792255 Jy ! Component: 200 - total flux cleaned = 0.000719944 Jy ! Total flux subtracted in 200 components = 0.000719944 Jy ! Clean residual min=-0.009301 max=0.012786 Jy/beam ! Clean residual mean=0.000081 rms=0.002688 Jy/beam ! Combined flux in latest and established models = 0.294815 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.294816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122418Jy sigma=0.000674 ! Fit after self-cal, rms=0.122446Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00798846 Jy ! Component: 100 - total flux cleaned = 0.00796634 Jy ! Component: 150 - total flux cleaned = 0.00878002 Jy ! Component: 200 - total flux cleaned = 0.00910876 Jy ! Total flux subtracted in 200 components = 0.00910876 Jy ! Clean residual min=-0.006906 max=0.007364 Jy/beam ! Clean residual mean=0.000110 rms=0.001966 Jy/beam ! Combined flux in latest and established models = 0.303924 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.303924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121538Jy sigma=0.000669 ! Fit after self-cal, rms=0.121447Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121447Jy sigma=0.000668 ! Fit after self-cal, rms=0.121113Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=11.3 mas, bpa=-4.946 degrees ! Estimated noise=3257.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377976 Jy ! Component: 100 - total flux cleaned = 0.00403651 Jy ! Component: 150 - total flux cleaned = 0.00430964 Jy ! Component: 200 - total flux cleaned = 0.004266 Jy ! Total flux subtracted in 200 components = 0.004266 Jy ! Clean residual min=-0.005968 max=0.006256 Jy/beam ! Clean residual mean=0.000125 rms=0.001629 Jy/beam ! Combined flux in latest and established models = 0.30819 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 90 components and 0.30819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120968Jy sigma=0.000666 ! Fit after self-cal, rms=0.120945Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000339273 Jy ! Component: 100 - total flux cleaned = 0.000559219 Jy ! Component: 150 - total flux cleaned = 0.000594625 Jy ! Component: 200 - total flux cleaned = 0.000564117 Jy ! Total flux subtracted in 200 components = 0.000564117 Jy ! Clean residual min=-0.005732 max=0.006065 Jy/beam ! Clean residual mean=0.000127 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.308754 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 107 components and 0.308754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120915Jy sigma=0.000666 ! Fit after self-cal, rms=0.120913Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120913Jy sigma=0.000666 ! Fit after self-cal, rms=0.120766Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.644 mas, bmaj=34.82 mas, bpa=-1.254 degrees ! Estimated noise=4401.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179514 Jy ! Component: 100 - total flux cleaned = 0.00191877 Jy ! Component: 150 - total flux cleaned = 0.00194594 Jy ! Component: 200 - total flux cleaned = 0.00194611 Jy ! Total flux subtracted in 200 components = 0.00194611 Jy ! Clean residual min=-0.007122 max=0.006401 Jy/beam ! Clean residual mean=0.000231 rms=0.002406 Jy/beam ! Combined flux in latest and established models = 0.3107 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 119 components and 0.3107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120755Jy sigma=0.000665 ! Fit after self-cal, rms=0.120736Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000454275 Jy ! Component: 100 - total flux cleaned = 0.000454189 Jy ! Component: 150 - total flux cleaned = 0.000478056 Jy ! Component: 200 - total flux cleaned = 0.000477333 Jy ! Total flux subtracted in 200 components = 0.000477333 Jy ! Clean residual min=-0.006754 max=0.006316 Jy/beam ! Clean residual mean=0.000234 rms=0.002369 Jy/beam ! Combined flux in latest and established models = 0.311178 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 125 components and 0.311178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120730Jy sigma=0.000665 ! Fit after self-cal, rms=0.120727Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=11.27 mas, bpa=-4.954 degrees ! Estimated noise=3254.12 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 11.27 at -4.954 degrees (North through East) ! Clean map min=-0.0053749 max=0.21661 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.151 mas, bmaj=7.641 mas, bpa=-3.675 degrees ! Estimated noise=7174.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.158398 Jy ! Component: 100 - total flux cleaned = 0.20558 Jy ! Component: 150 - total flux cleaned = 0.232605 Jy ! Component: 200 - total flux cleaned = 0.250453 Jy ! Total flux subtracted in 200 components = 0.250453 Jy ! Clean residual min=-0.015591 max=0.015557 Jy/beam ! Clean residual mean=-0.000064 rms=0.003959 Jy/beam ! Combined flux in latest and established models = 0.250453 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.250453 Jy ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=11.27 mas, bpa=-4.954 degrees ! Estimated noise=3254.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269488 Jy ! Component: 100 - total flux cleaned = 0.0405997 Jy ! Component: 150 - total flux cleaned = 0.0494959 Jy ! Component: 200 - total flux cleaned = 0.0529766 Jy ! Total flux subtracted in 200 components = 0.0529766 Jy ! Clean residual min=-0.007624 max=0.005710 Jy/beam ! Clean residual mean=0.000102 rms=0.001809 Jy/beam ! Combined flux in latest and established models = 0.30343 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 68 components and 0.30343 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.644 mas, bmaj=34.82 mas, bpa=-1.254 degrees ! Estimated noise=4401.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00501696 Jy ! Component: 100 - total flux cleaned = 0.00646729 Jy ! Component: 150 - total flux cleaned = 0.00692748 Jy ! Component: 200 - total flux cleaned = 0.00725244 Jy ! Total flux subtracted in 200 components = 0.00725244 Jy ! Clean residual min=-0.006295 max=0.005977 Jy/beam ! Clean residual mean=0.000235 rms=0.002354 Jy/beam ! Combined flux in latest and established models = 0.310682 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233568 Jy ! Component: 100 - total flux cleaned = 0.000437656 Jy ! Component: 150 - total flux cleaned = 0.000548351 Jy ! Component: 200 - total flux cleaned = 0.000615603 Jy ! Total flux subtracted in 200 components = 0.000615603 Jy ! Clean residual min=-0.006311 max=0.006033 Jy/beam ! Clean residual mean=0.000236 rms=0.002339 Jy/beam ! Combined flux in latest and established models = 0.311298 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 94 components and 0.311298 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=11.27 mas, bpa=-4.954 degrees ! Estimated noise=3254.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136471 Jy ! Component: 100 - total flux cleaned = 0.000293437 Jy ! Component: 150 - total flux cleaned = 0.000292722 Jy ! Component: 200 - total flux cleaned = 0.000454943 Jy ! Total flux subtracted in 200 components = 0.000454943 Jy ! Clean residual min=-0.005900 max=0.005229 Jy/beam ! Clean residual mean=0.000119 rms=0.001459 Jy/beam ! Combined flux in latest and established models = 0.311753 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 117 components and 0.311753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120690Jy sigma=0.000665 ! Fit after self-cal, rms=0.120674Jy sigma=0.000665 wmodel J1827-4533_S_2017_07_16_pus_map.mod ! Writing 117 model components to file: J1827-4533_S_2017_07_16_pus_map.mod wobs J1827-4533_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1827-4533_S_2017_07_16_pus_uvs.fits wwins J1827-4533_S_2017_07_16_pus_map.win ! wwins: Wrote 3 windows to J1827-4533_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00059422 Jy ! Component: 100 - total flux cleaned = -2.52432e-05 Jy ! Component: 150 - total flux cleaned = 0.000545761 Jy ! Component: 200 - total flux cleaned = 0.00100566 Jy ! Component: 250 - total flux cleaned = 0.00130933 Jy ! Component: 300 - total flux cleaned = 0.00119817 Jy ! Component: 350 - total flux cleaned = 0.00114446 Jy ! Component: 400 - total flux cleaned = 0.00124022 Jy ! Component: 450 - total flux cleaned = 0.00123804 Jy ! Component: 500 - total flux cleaned = 0.00137259 Jy ! Component: 550 - total flux cleaned = 0.00150034 Jy ! Component: 600 - total flux cleaned = 0.00146012 Jy ! Component: 650 - total flux cleaned = 0.00149966 Jy ! Component: 700 - total flux cleaned = 0.00157587 Jy ! Component: 750 - total flux cleaned = 0.00168683 Jy ! Component: 800 - total flux cleaned = 0.00165157 Jy ! Component: 850 - total flux cleaned = 0.0016513 Jy ! Component: 900 - total flux cleaned = 0.00165209 Jy ! Component: 950 - total flux cleaned = 0.00161937 Jy ! Component: 1000 - total flux cleaned = 0.00165223 Jy ! Component: 1050 - total flux cleaned = 0.00162045 Jy ! Component: 1100 - total flux cleaned = 0.00152781 Jy ! Component: 1150 - total flux cleaned = 0.00161939 Jy ! Component: 1200 - total flux cleaned = 0.00167912 Jy ! Component: 1250 - total flux cleaned = 0.00170828 Jy ! Component: 1300 - total flux cleaned = 0.00179456 Jy ! Component: 1350 - total flux cleaned = 0.00193551 Jy ! Component: 1400 - total flux cleaned = 0.00199097 Jy ! Component: 1450 - total flux cleaned = 0.00210016 Jy ! Component: 1500 - total flux cleaned = 0.00215401 Jy ! Component: 1550 - total flux cleaned = 0.00233992 Jy ! Component: 1600 - total flux cleaned = 0.00249719 Jy ! Component: 1650 - total flux cleaned = 0.00265228 Jy ! Component: 1700 - total flux cleaned = 0.00277977 Jy ! Component: 1750 - total flux cleaned = 0.00295642 Jy ! Component: 1800 - total flux cleaned = 0.00300621 Jy ! Component: 1850 - total flux cleaned = 0.00310501 Jy ! Component: 1900 - total flux cleaned = 0.00325178 Jy ! Component: 1950 - total flux cleaned = 0.0033244 Jy ! Component: 2000 - total flux cleaned = 0.00344501 Jy ! Component: 2050 - total flux cleaned = 0.00361247 Jy ! Component: 2100 - total flux cleaned = 0.00373143 Jy ! Component: 2150 - total flux cleaned = 0.00392123 Jy ! Component: 2200 - total flux cleaned = 0.00403947 Jy ! Component: 2250 - total flux cleaned = 0.00418094 Jy ! Component: 2300 - total flux cleaned = 0.00432204 Jy ! Component: 2350 - total flux cleaned = 0.00446316 Jy ! Component: 2400 - total flux cleaned = 0.00460424 Jy ! Component: 2450 - total flux cleaned = 0.00476901 Jy ! Component: 2500 - total flux cleaned = 0.00495807 Jy ! Component: 2550 - total flux cleaned = 0.00512394 Jy ! Component: 2600 - total flux cleaned = 0.00529064 Jy ! Component: 2650 - total flux cleaned = 0.00550618 Jy ! Component: 2700 - total flux cleaned = 0.00562655 Jy ! Component: 2750 - total flux cleaned = 0.00577195 Jy ! Component: 2800 - total flux cleaned = 0.00596745 Jy ! Component: 2850 - total flux cleaned = 0.00611515 Jy ! Component: 2900 - total flux cleaned = 0.00633824 Jy ! Component: 2950 - total flux cleaned = 0.0065386 Jy ! Component: 3000 - total flux cleaned = 0.00663952 Jy ! Component: 3050 - total flux cleaned = 0.00676672 Jy ! Component: 3100 - total flux cleaned = 0.00686935 Jy ! Component: 3150 - total flux cleaned = 0.00702539 Jy ! Component: 3200 - total flux cleaned = 0.00723559 Jy ! Component: 3250 - total flux cleaned = 0.00739481 Jy ! Component: 3300 - total flux cleaned = 0.00755549 Jy ! Component: 3350 - total flux cleaned = 0.00777263 Jy ! Component: 3400 - total flux cleaned = 0.00788258 Jy ! Component: 3450 - total flux cleaned = 0.00807689 Jy ! Component: 3500 - total flux cleaned = 0.00813287 Jy ! Component: 3550 - total flux cleaned = 0.00824714 Jy ! Component: 3600 - total flux cleaned = 0.00824705 Jy ! Component: 3650 - total flux cleaned = 0.00836418 Jy ! Component: 3700 - total flux cleaned = 0.00854302 Jy ! Component: 3750 - total flux cleaned = 0.0086641 Jy ! Component: 3800 - total flux cleaned = 0.00878677 Jy ! Component: 3850 - total flux cleaned = 0.00894274 Jy ! Component: 3900 - total flux cleaned = 0.00906938 Jy ! Component: 3950 - total flux cleaned = 0.00919809 Jy ! Component: 4000 - total flux cleaned = 0.00932896 Jy ! Component: 4050 - total flux cleaned = 0.00942962 Jy ! Total flux subtracted in 4096 components = 0.00949786 Jy ! Clean residual min=-0.002074 max=0.002060 Jy/beam ! Clean residual mean=0.000037 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.321251 Jy keep ! Adding 215 model components to the UV plane model. ! The established model now contains 332 components and 0.32125 Jy ![Exited script file: muppet] wmap "J1827-4533_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 11.27 at -4.954 degrees (North through East) ! Clean map min=-0.0032424 max=0.21794 Jy/beam ! Writing clean map to FITS file: J1827-4533_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.21794 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000497182 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.684382 0.684382 1.36876 2.73753 5.47506 10.9501 21.9002 43.8005 87.6009 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.217 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 11.27 at -4.954 degrees (North through East) ! Clean map min=-0.0032424 max=0.21794 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1827-4533_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:15:49 2019