! Started logfile: J1825-1718_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:46:40 2019 obs J1825-1718_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1825-1718_S_2017_03_27_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.560822 visibilities/baseline/integration-bin. ! Found source: J1825-1718 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 17464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1825-1718_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 471 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 471 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 416 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1051 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.873089Jy sigma=0.006460 ! Fit after self-cal, rms=0.859916Jy sigma=0.006371 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.769 mas, bmaj=17.18 mas, bpa=5.112 degrees ! Estimated noise=1174.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111023 Jy ! Component: 100 - total flux cleaned = 0.162848 Jy ! Total flux subtracted in 100 components = 0.162848 Jy ! Clean residual min=-0.013288 max=0.027692 Jy/beam ! Clean residual mean=-0.000176 rms=0.005585 Jy/beam ! Combined flux in latest and established models = 0.162848 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.162848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123393Jy sigma=0.000936 ! Fit after self-cal, rms=0.122661Jy sigma=0.000932 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.822 mas, bmaj=19.32 mas, bpa=5.969 degrees ! Estimated noise=822.076 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0510488 Jy ! Component: 100 - total flux cleaned = 0.0824063 Jy ! Component: 150 - total flux cleaned = 0.103726 Jy ! Component: 200 - total flux cleaned = 0.118713 Jy ! Total flux subtracted in 200 components = 0.118713 Jy ! Clean residual min=-0.007981 max=0.015736 Jy/beam ! Clean residual mean=-0.000107 rms=0.003716 Jy/beam ! Combined flux in latest and established models = 0.281562 Jy ! Performing phase self-cal ! Adding 97 model components to the UV plane model. ! The established model now contains 140 components and 0.281562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100424Jy sigma=0.000707 ! Fit after self-cal, rms=0.099516Jy sigma=0.000702 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.98 HN 1.01 KP 1.02 ! LA 0.92 MK 1.00* NL 1.30 OV 1.16 ! PT 0.87 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.88 KP 0.98 ! LA 0.88 MK 1.00* NL 1.30 OV 1.16 ! PT 0.85 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.03 HN 0.88 KP 0.97 ! LA 0.90 MK 1.00* NL 1.18 OV 1.04 ! PT 0.85 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.05 HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 0.92 ! PT 0.88 SC 1.00* ! ! ! Fit before self-cal, rms=0.099516Jy sigma=0.000702 ! Fit after self-cal, rms=0.100741Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.975 mas, bmaj=19.92 mas, bpa=6.731 degrees ! Estimated noise=819.567 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317067 Jy ! Component: 100 - total flux cleaned = 0.00361746 Jy ! Component: 150 - total flux cleaned = 0.00357052 Jy ! Component: 200 - total flux cleaned = 0.0035311 Jy ! Total flux subtracted in 200 components = 0.0035311 Jy ! Clean residual min=-0.004303 max=0.006935 Jy/beam ! Clean residual mean=-0.000048 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 0.285093 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 161 components and 0.285093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100660Jy sigma=0.000666 ! Fit after self-cal, rms=0.100940Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100940Jy sigma=0.000665 ! Fit after self-cal, rms=0.101289Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.912 mas, bmaj=19.9 mas, bpa=7.251 degrees ! Estimated noise=821.116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184729 Jy ! Component: 100 - total flux cleaned = 0.00198302 Jy ! Component: 150 - total flux cleaned = 0.00191317 Jy ! Component: 200 - total flux cleaned = 0.00179371 Jy ! Total flux subtracted in 200 components = 0.00179371 Jy ! Clean residual min=-0.004150 max=0.006166 Jy/beam ! Clean residual mean=-0.000041 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 0.286886 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 168 components and 0.286886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101262Jy sigma=0.000663 ! Fit after self-cal, rms=0.101281Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252004 Jy ! Component: 100 - total flux cleaned = 7.61889e-05 Jy ! Component: 150 - total flux cleaned = -8.31581e-05 Jy ! Component: 200 - total flux cleaned = -0.000156948 Jy ! Total flux subtracted in 200 components = -0.000156948 Jy ! Clean residual min=-0.004094 max=0.006119 Jy/beam ! Clean residual mean=-0.000040 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.286729 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 180 components and 0.286729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101267Jy sigma=0.000662 ! Fit after self-cal, rms=0.101255Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101255Jy sigma=0.000662 ! Fit after self-cal, rms=0.100847Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.876 mas, bmaj=19.79 mas, bpa=7.868 degrees ! Estimated noise=815.632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000463523 Jy ! Component: 100 - total flux cleaned = 0.000555115 Jy ! Component: 150 - total flux cleaned = 0.000582286 Jy ! Component: 200 - total flux cleaned = 0.00056128 Jy ! Total flux subtracted in 200 components = 0.00056128 Jy ! Clean residual min=-0.003952 max=0.005639 Jy/beam ! Clean residual mean=-0.000038 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.287291 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 196 components and 0.287291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100834Jy sigma=0.000661 ! Fit after self-cal, rms=0.100932Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.21205e-05 Jy ! Component: 100 - total flux cleaned = 4.9648e-05 Jy ! Component: 150 - total flux cleaned = 8.79579e-06 Jy ! Component: 200 - total flux cleaned = -1.02209e-05 Jy ! Total flux subtracted in 200 components = -1.02209e-05 Jy ! Clean residual min=-0.003944 max=0.005538 Jy/beam ! Clean residual mean=-0.000038 rms=0.001446 Jy/beam ! Combined flux in latest and established models = 0.28728 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 204 components and 0.287281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100922Jy sigma=0.000661 ! Fit after self-cal, rms=0.100923Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100923Jy sigma=0.000661 ! Fit after self-cal, rms=0.101329Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.879 mas, bmaj=21.07 mas, bpa=10.57 degrees ! Estimated noise=814.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131819 Jy ! Component: 100 - total flux cleaned = 0.00144642 Jy ! Component: 150 - total flux cleaned = 0.0014477 Jy ! Component: 200 - total flux cleaned = 0.0014724 Jy ! Total flux subtracted in 200 components = 0.0014724 Jy ! Clean residual min=-0.004335 max=0.006164 Jy/beam ! Clean residual mean=-0.000041 rms=0.001621 Jy/beam ! Combined flux in latest and established models = 0.288753 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 209 components and 0.288753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101342Jy sigma=0.000661 ! Fit after self-cal, rms=0.101397Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.14135e-05 Jy ! Component: 100 - total flux cleaned = 3.25462e-05 Jy ! Component: 150 - total flux cleaned = 3.39793e-05 Jy ! Component: 200 - total flux cleaned = 5.72681e-05 Jy ! Total flux subtracted in 200 components = 5.72681e-05 Jy ! Clean residual min=-0.004299 max=0.006107 Jy/beam ! Clean residual mean=-0.000041 rms=0.001611 Jy/beam ! Combined flux in latest and established models = 0.28881 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 212 components and 0.28881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101402Jy sigma=0.000661 ! Fit after self-cal, rms=0.101398Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=7.885 mas, bmaj=19.78 mas, bpa=8.101 degrees ! Estimated noise=815.65 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.885 x 19.78 at 8.101 degrees (North through East) ! Clean map min=-0.0037255 max=0.14581 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.686 mas, bmaj=17.51 mas, bpa=6.865 degrees ! Estimated noise=1184.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111649 Jy ! Component: 100 - total flux cleaned = 0.165462 Jy ! Component: 150 - total flux cleaned = 0.199755 Jy ! Component: 200 - total flux cleaned = 0.222137 Jy ! Total flux subtracted in 200 components = 0.222137 Jy ! Clean residual min=-0.008784 max=0.012071 Jy/beam ! Clean residual mean=-0.000090 rms=0.002805 Jy/beam ! Combined flux in latest and established models = 0.222137 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 58 model components to the UV plane model. ! The established model now contains 58 components and 0.222137 Jy ! Inverting map and beam ! Estimated beam: bmin=7.885 mas, bmaj=19.78 mas, bpa=8.101 degrees ! Estimated noise=815.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215953 Jy ! Component: 100 - total flux cleaned = 0.0353573 Jy ! Component: 150 - total flux cleaned = 0.0446319 Jy ! Component: 200 - total flux cleaned = 0.050967 Jy ! Total flux subtracted in 200 components = 0.050967 Jy ! Clean residual min=-0.005768 max=0.006989 Jy/beam ! Clean residual mean=-0.000054 rms=0.001808 Jy/beam ! Combined flux in latest and established models = 0.273104 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 142 components and 0.273104 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.879 mas, bmaj=21.07 mas, bpa=10.57 degrees ! Estimated noise=814.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536172 Jy ! Component: 100 - total flux cleaned = 0.00876277 Jy ! Component: 150 - total flux cleaned = 0.0109807 Jy ! Component: 200 - total flux cleaned = 0.0124378 Jy ! Total flux subtracted in 200 components = 0.0124378 Jy ! Clean residual min=-0.004575 max=0.006158 Jy/beam ! Clean residual mean=-0.000045 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 0.285542 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000511687 Jy ! Component: 100 - total flux cleaned = 0.000804959 Jy ! Component: 150 - total flux cleaned = 0.00106658 Jy ! Component: 200 - total flux cleaned = 0.00127383 Jy ! Total flux subtracted in 200 components = 0.00127383 Jy ! Clean residual min=-0.004400 max=0.006179 Jy/beam ! Clean residual mean=-0.000043 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.286816 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 167 components and 0.286816 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=7.885 mas, bmaj=19.78 mas, bpa=8.101 degrees ! Estimated noise=815.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00083487 Jy ! Component: 100 - total flux cleaned = -0.000838603 Jy ! Component: 150 - total flux cleaned = -0.000789129 Jy ! Component: 200 - total flux cleaned = -0.000790279 Jy ! Total flux subtracted in 200 components = -0.000790279 Jy ! Clean residual min=-0.004276 max=0.005752 Jy/beam ! Clean residual mean=-0.000037 rms=0.001484 Jy/beam ! Combined flux in latest and established models = 0.286026 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 172 components and 0.286026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101451Jy sigma=0.000662 ! Fit after self-cal, rms=0.101429Jy sigma=0.000661 wmodel J1825-1718_S_2017_03_27_pus_map.mod ! Writing 172 model components to file: J1825-1718_S_2017_03_27_pus_map.mod wobs J1825-1718_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1825-1718_S_2017_03_27_pus_uvs.fits wwins J1825-1718_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J1825-1718_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256681 Jy ! Component: 100 - total flux cleaned = 0.00477241 Jy ! Component: 150 - total flux cleaned = 0.0067646 Jy ! Component: 200 - total flux cleaned = 0.00822029 Jy ! Component: 250 - total flux cleaned = 0.00955509 Jy ! Component: 300 - total flux cleaned = 0.0104171 Jy ! Component: 350 - total flux cleaned = 0.0111058 Jy ! Component: 400 - total flux cleaned = 0.0115409 Jy ! Component: 450 - total flux cleaned = 0.0119002 Jy ! Component: 500 - total flux cleaned = 0.0121442 Jy ! Component: 550 - total flux cleaned = 0.0121456 Jy ! Component: 600 - total flux cleaned = 0.0121901 Jy ! Component: 650 - total flux cleaned = 0.012233 Jy ! Component: 700 - total flux cleaned = 0.0121501 Jy ! Component: 750 - total flux cleaned = 0.012149 Jy ! Component: 800 - total flux cleaned = 0.0120308 Jy ! Component: 850 - total flux cleaned = 0.0119551 Jy ! Component: 900 - total flux cleaned = 0.0118808 Jy ! Component: 950 - total flux cleaned = 0.0119885 Jy ! Component: 1000 - total flux cleaned = 0.0119176 Jy ! Component: 1050 - total flux cleaned = 0.0118501 Jy ! Component: 1100 - total flux cleaned = 0.011784 Jy ! Component: 1150 - total flux cleaned = 0.0117192 Jy ! Component: 1200 - total flux cleaned = 0.0115608 Jy ! Component: 1250 - total flux cleaned = 0.0115002 Jy ! Component: 1300 - total flux cleaned = 0.0113501 Jy ! Component: 1350 - total flux cleaned = 0.0113207 Jy ! Component: 1400 - total flux cleaned = 0.0112336 Jy ! Component: 1450 - total flux cleaned = 0.0111197 Jy ! Component: 1500 - total flux cleaned = 0.0110643 Jy ! Component: 1550 - total flux cleaned = 0.0109828 Jy ! Component: 1600 - total flux cleaned = 0.0109825 Jy ! Component: 1650 - total flux cleaned = 0.0109047 Jy ! Component: 1700 - total flux cleaned = 0.0108791 Jy ! Component: 1750 - total flux cleaned = 0.0109291 Jy ! Component: 1800 - total flux cleaned = 0.0108066 Jy ! Component: 1850 - total flux cleaned = 0.0107588 Jy ! Component: 1900 - total flux cleaned = 0.0107114 Jy ! Component: 1950 - total flux cleaned = 0.0106188 Jy ! Component: 2000 - total flux cleaned = 0.0105278 Jy ! Component: 2050 - total flux cleaned = 0.010416 Jy ! Component: 2100 - total flux cleaned = 0.0103061 Jy ! Component: 2150 - total flux cleaned = 0.0102197 Jy ! Component: 2200 - total flux cleaned = 0.010113 Jy ! Component: 2250 - total flux cleaned = 0.00992418 Jy ! Component: 2300 - total flux cleaned = 0.00980105 Jy ! Component: 2350 - total flux cleaned = 0.0096187 Jy ! Component: 2400 - total flux cleaned = 0.00957914 Jy ! Component: 2450 - total flux cleaned = 0.00942182 Jy ! Component: 2500 - total flux cleaned = 0.00928632 Jy ! Component: 2550 - total flux cleaned = 0.00915261 Jy ! Component: 2600 - total flux cleaned = 0.00902078 Jy ! Component: 2650 - total flux cleaned = 0.00892794 Jy ! Component: 2700 - total flux cleaned = 0.00885429 Jy ! Component: 2750 - total flux cleaned = 0.00869149 Jy ! Component: 2800 - total flux cleaned = 0.00860249 Jy ! Component: 2850 - total flux cleaned = 0.00851419 Jy ! Component: 2900 - total flux cleaned = 0.00842689 Jy ! Component: 2950 - total flux cleaned = 0.00834082 Jy ! Component: 3000 - total flux cleaned = 0.00825618 Jy ! Component: 3050 - total flux cleaned = 0.00818921 Jy ! Component: 3100 - total flux cleaned = 0.00810623 Jy ! Component: 3150 - total flux cleaned = 0.00800801 Jy ! Component: 3200 - total flux cleaned = 0.00789486 Jy ! Component: 3250 - total flux cleaned = 0.00781521 Jy ! Component: 3300 - total flux cleaned = 0.00775199 Jy ! Component: 3350 - total flux cleaned = 0.00761123 Jy ! Component: 3400 - total flux cleaned = 0.00754952 Jy ! Component: 3450 - total flux cleaned = 0.00744223 Jy ! Component: 3500 - total flux cleaned = 0.00738155 Jy ! Component: 3550 - total flux cleaned = 0.00729135 Jy ! Component: 3600 - total flux cleaned = 0.00715769 Jy ! Component: 3650 - total flux cleaned = 0.00708422 Jy ! Component: 3700 - total flux cleaned = 0.00699692 Jy ! Component: 3750 - total flux cleaned = 0.00695345 Jy ! Component: 3800 - total flux cleaned = 0.00688174 Jy ! Component: 3850 - total flux cleaned = 0.00683913 Jy ! Component: 3900 - total flux cleaned = 0.00683926 Jy ! Component: 3950 - total flux cleaned = 0.00678332 Jy ! Component: 4000 - total flux cleaned = 0.0067973 Jy ! Component: 4050 - total flux cleaned = 0.00675601 Jy ! Total flux subtracted in 4096 components = 0.00672862 Jy ! Clean residual min=-0.000775 max=0.000727 Jy/beam ! Clean residual mean=-0.000007 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.292754 Jy keep ! Adding 471 model components to the UV plane model. ! The established model now contains 643 components and 0.292754 Jy ![Exited script file: muppet] wmap "J1825-1718_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.885 x 19.78 at 8.101 degrees (North through East) ! Clean map min=-0.0025119 max=0.14602 Jy/beam ! Writing clean map to FITS file: J1825-1718_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.146018 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000319534 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.656497 0.656497 1.31299 2.62599 5.25197 10.5039 21.0079 42.0158 84.0316 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.146 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.885 x 19.78 at 8.101 degrees (North through East) ! Clean map min=-0.0025119 max=0.14602 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1825-1718_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:46:45 2019