! Started logfile: J1823-2726_S_2017_09_26_pus_uvs.log on Sat May 11 13:04:36 2019 obs J1823-2726_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1823-2726_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.657502 visibilities/baseline/integration-bin. ! Found source: J1823-2726 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 27836 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1823-2726_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 604 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 751 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 618 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2058 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.865246Jy sigma=0.005883 ! Fit after self-cal, rms=0.815301Jy sigma=0.005513 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.966 mas, bmaj=27.41 mas, bpa=-4.068 degrees ! Estimated noise=1385.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.164988 Jy ! Component: 100 - total flux cleaned = 0.250737 Jy ! Total flux subtracted in 100 components = 0.250737 Jy ! Clean residual min=-0.035406 max=0.064073 Jy/beam ! Clean residual mean=-0.001692 rms=0.018567 Jy/beam ! Combined flux in latest and established models = 0.250737 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 59 components and 0.250737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235111Jy sigma=0.001763 ! Fit after self-cal, rms=0.234405Jy sigma=0.001759 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.738 mas, bmaj=31.71 mas, bpa=-4.328 degrees ! Estimated noise=761.772 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0943841 Jy ! Component: 100 - total flux cleaned = 0.159628 Jy ! Component: 150 - total flux cleaned = 0.206749 Jy ! Component: 200 - total flux cleaned = 0.241386 Jy ! Total flux subtracted in 200 components = 0.241386 Jy ! Clean residual min=-0.040884 max=0.090311 Jy/beam ! Clean residual mean=-0.001834 rms=0.022169 Jy/beam ! Combined flux in latest and established models = 0.492123 Jy ! Performing phase self-cal ! Adding 102 model components to the UV plane model. ! The established model now contains 156 components and 0.492123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188887Jy sigma=0.001378 ! Fit after self-cal, rms=0.187509Jy sigma=0.001371 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.58 HN 0.85 KP 1.03 ! LA 0.76 MK 1.00* NL 2.20 OV 1.88 ! PT 0.67 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.71 HN 0.84 KP 0.99 ! LA 0.75 MK 1.00* NL 2.26 OV 2.05 ! PT 0.65 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.76 HN 0.96 KP 0.99 ! LA 0.77 MK 1.00* NL 2.12 OV 1.76 ! PT 0.65 ! ! ! Correcting IF 4. ! A total of 468 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.63 HN 1.00* KP 1.00* ! LA 0.71 MK 1.00* NL 1.00* OV 3.50 ! PT 0.82 ! ! ! Fit before self-cal, rms=0.187509Jy sigma=0.001371 ! Fit after self-cal, rms=0.247788Jy sigma=0.000895 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.798 mas, bmaj=34.5 mas, bpa=-4.412 degrees ! Estimated noise=905.663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00296075 Jy ! Component: 100 - total flux cleaned = -0.00410382 Jy ! Component: 150 - total flux cleaned = -0.00500423 Jy ! Component: 200 - total flux cleaned = -0.00605347 Jy ! Total flux subtracted in 200 components = -0.00605347 Jy ! Clean residual min=-0.027939 max=0.039580 Jy/beam ! Clean residual mean=-0.000241 rms=0.010561 Jy/beam ! Combined flux in latest and established models = 0.486069 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 171 components and 0.486069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242590Jy sigma=0.000891 ! Fit after self-cal, rms=0.246095Jy sigma=0.000881 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246095Jy sigma=0.000881 ! Fit after self-cal, rms=0.263153Jy sigma=0.000875 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.428 mas, bmaj=36.29 mas, bpa=-4.991 degrees ! Estimated noise=908.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00396749 Jy ! Component: 100 - total flux cleaned = -0.00489116 Jy ! Component: 150 - total flux cleaned = -0.00560325 Jy ! Component: 200 - total flux cleaned = -0.00617368 Jy ! Total flux subtracted in 200 components = -0.00617368 Jy ! Clean residual min=-0.025176 max=0.037705 Jy/beam ! Clean residual mean=-0.000230 rms=0.010048 Jy/beam ! Combined flux in latest and established models = 0.479896 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 178 components and 0.479896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.259447Jy sigma=0.000874 ! Fit after self-cal, rms=0.259498Jy sigma=0.000873 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000396474 Jy ! Component: 100 - total flux cleaned = -0.000576873 Jy ! Component: 150 - total flux cleaned = -0.0011658 Jy ! Component: 200 - total flux cleaned = -0.00189059 Jy ! Total flux subtracted in 200 components = -0.00189059 Jy ! Clean residual min=-0.024903 max=0.039178 Jy/beam ! Clean residual mean=-0.000242 rms=0.009994 Jy/beam ! Combined flux in latest and established models = 0.478005 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 188 components and 0.478005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258249Jy sigma=0.000873 ! Fit after self-cal, rms=0.258256Jy sigma=0.000873 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258256Jy sigma=0.000873 ! Fit after self-cal, rms=0.313497Jy sigma=0.000824 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.454 mas, bmaj=39.29 mas, bpa=-5.401 degrees ! Estimated noise=945.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152754 Jy ! Component: 100 - total flux cleaned = -0.00414355 Jy ! Component: 150 - total flux cleaned = -0.00599321 Jy ! Component: 200 - total flux cleaned = -0.00808328 Jy ! Total flux subtracted in 200 components = -0.00808328 Jy ! Clean residual min=-0.027847 max=0.033503 Jy/beam ! Clean residual mean=-0.000178 rms=0.008785 Jy/beam ! Combined flux in latest and established models = 0.469922 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 202 components and 0.469922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310589Jy sigma=0.000825 ! Fit after self-cal, rms=0.310825Jy sigma=0.000824 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00245796 Jy ! Component: 100 - total flux cleaned = -0.00362996 Jy ! Component: 150 - total flux cleaned = -0.00479772 Jy ! Component: 200 - total flux cleaned = -0.00566904 Jy ! Total flux subtracted in 200 components = -0.00566904 Jy ! Clean residual min=-0.028120 max=0.035030 Jy/beam ! Clean residual mean=-0.000219 rms=0.008830 Jy/beam ! Combined flux in latest and established models = 0.464253 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 219 components and 0.464253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309587Jy sigma=0.000826 ! Fit after self-cal, rms=0.309701Jy sigma=0.000826 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309701Jy sigma=0.000826 ! Fit after self-cal, rms=0.360817Jy sigma=0.000821 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.49 mas, bmaj=40.81 mas, bpa=-3.991 degrees ! Estimated noise=992.867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00244353 Jy ! Component: 100 - total flux cleaned = -0.00483243 Jy ! Component: 150 - total flux cleaned = -0.00687135 Jy ! Component: 200 - total flux cleaned = -0.00886288 Jy ! Total flux subtracted in 200 components = -0.00886288 Jy ! Clean residual min=-0.034445 max=0.038023 Jy/beam ! Clean residual mean=-0.000218 rms=0.010573 Jy/beam ! Combined flux in latest and established models = 0.45539 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 220 components and 0.45539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357947Jy sigma=0.000823 ! Fit after self-cal, rms=0.358485Jy sigma=0.000822 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00246152 Jy ! Component: 100 - total flux cleaned = -0.00374939 Jy ! Component: 150 - total flux cleaned = -0.00501458 Jy ! Component: 200 - total flux cleaned = -0.0059325 Jy ! Total flux subtracted in 200 components = -0.0059325 Jy ! Clean residual min=-0.034885 max=0.039528 Jy/beam ! Clean residual mean=-0.000276 rms=0.010656 Jy/beam ! Combined flux in latest and established models = 0.449457 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 225 components and 0.449457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357276Jy sigma=0.000825 ! Fit after self-cal, rms=0.357500Jy sigma=0.000825 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.556 mas, bmaj=40.92 mas, bpa=-5.55 degrees ! Estimated noise=988.072 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.556 x 40.92 at -5.55 degrees (North through East) ! Clean map min=-0.029339 max=0.25596 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.572 mas, bmaj=35.04 mas, bpa=-5.302 degrees ! Estimated noise=2037.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.235355 Jy ! Component: 100 - total flux cleaned = 0.332237 Jy ! Component: 150 - total flux cleaned = 0.384683 Jy ! Component: 200 - total flux cleaned = 0.415321 Jy ! Total flux subtracted in 200 components = 0.415321 Jy ! Clean residual min=-0.033549 max=0.047170 Jy/beam ! Clean residual mean=-0.000406 rms=0.012775 Jy/beam ! Combined flux in latest and established models = 0.415321 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 73 model components to the UV plane model. ! The established model now contains 73 components and 0.415321 Jy ! Inverting map and beam ! Estimated beam: bmin=6.556 mas, bmaj=40.92 mas, bpa=-5.55 degrees ! Estimated noise=988.072 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203583 Jy ! Component: 100 - total flux cleaned = 0.0253365 Jy ! Component: 150 - total flux cleaned = 0.0268911 Jy ! Component: 200 - total flux cleaned = 0.0272137 Jy ! Total flux subtracted in 200 components = 0.0272137 Jy ! Clean residual min=-0.030935 max=0.039170 Jy/beam ! Clean residual mean=-0.000299 rms=0.009596 Jy/beam ! Combined flux in latest and established models = 0.442534 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 92 components and 0.442534 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.49 mas, bmaj=40.81 mas, bpa=-3.991 degrees ! Estimated noise=992.867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219186 Jy ! Component: 100 - total flux cleaned = 0.00243729 Jy ! Component: 150 - total flux cleaned = 0.00262641 Jy ! Component: 200 - total flux cleaned = 0.00279446 Jy ! Total flux subtracted in 200 components = 0.00279446 Jy ! Clean residual min=-0.036137 max=0.041845 Jy/beam ! Clean residual mean=-0.000331 rms=0.010956 Jy/beam ! Combined flux in latest and established models = 0.445329 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161399 Jy ! Component: 100 - total flux cleaned = 0.000312983 Jy ! Component: 150 - total flux cleaned = 0.000454243 Jy ! Component: 200 - total flux cleaned = 0.000582735 Jy ! Total flux subtracted in 200 components = 0.000582735 Jy ! Clean residual min=-0.035958 max=0.041823 Jy/beam ! Clean residual mean=-0.000324 rms=0.010902 Jy/beam ! Combined flux in latest and established models = 0.445912 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 113 components and 0.445912 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.556 mas, bmaj=40.92 mas, bpa=-5.55 degrees ! Estimated noise=988.072 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132649 Jy ! Component: 100 - total flux cleaned = -0.000949253 Jy ! Component: 150 - total flux cleaned = -0.000952775 Jy ! Component: 200 - total flux cleaned = -0.000804336 Jy ! Total flux subtracted in 200 components = -0.000804336 Jy ! Clean residual min=-0.030569 max=0.038180 Jy/beam ! Clean residual mean=-0.000268 rms=0.009415 Jy/beam ! Combined flux in latest and established models = 0.445107 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 141 components and 0.445107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357948Jy sigma=0.000832 ! Fit after self-cal, rms=0.357378Jy sigma=0.000830 wmodel J1823-2726_S_2017_09_26_pus_map.mod ! Writing 141 model components to file: J1823-2726_S_2017_09_26_pus_map.mod wobs J1823-2726_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1823-2726_S_2017_09_26_pus_uvs.fits wwins J1823-2726_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1823-2726_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143757 Jy ! Component: 100 - total flux cleaned = 0.0233489 Jy ! Component: 150 - total flux cleaned = 0.0305585 Jy ! Component: 200 - total flux cleaned = 0.0363211 Jy ! Component: 250 - total flux cleaned = 0.0412353 Jy ! Component: 300 - total flux cleaned = 0.0466306 Jy ! Component: 350 - total flux cleaned = 0.0502999 Jy ! Component: 400 - total flux cleaned = 0.051703 Jy ! Component: 450 - total flux cleaned = 0.0530676 Jy ! Component: 500 - total flux cleaned = 0.0537224 Jy ! Component: 550 - total flux cleaned = 0.0546756 Jy ! Component: 600 - total flux cleaned = 0.0556009 Jy ! Component: 650 - total flux cleaned = 0.0562065 Jy ! Component: 700 - total flux cleaned = 0.0562062 Jy ! Component: 750 - total flux cleaned = 0.0556286 Jy ! Component: 800 - total flux cleaned = 0.055066 Jy ! Component: 850 - total flux cleaned = 0.0542454 Jy ! Component: 900 - total flux cleaned = 0.0545169 Jy ! Component: 950 - total flux cleaned = 0.0547803 Jy ! Component: 1000 - total flux cleaned = 0.0542621 Jy ! Component: 1050 - total flux cleaned = 0.0540074 Jy ! Component: 1100 - total flux cleaned = 0.0535172 Jy ! Component: 1150 - total flux cleaned = 0.0535204 Jy ! Component: 1200 - total flux cleaned = 0.0537599 Jy ! Component: 1250 - total flux cleaned = 0.0539919 Jy ! Component: 1300 - total flux cleaned = 0.0532956 Jy ! Component: 1350 - total flux cleaned = 0.0537546 Jy ! Component: 1400 - total flux cleaned = 0.0528459 Jy ! Component: 1450 - total flux cleaned = 0.0528472 Jy ! Component: 1500 - total flux cleaned = 0.0526261 Jy ! Component: 1550 - total flux cleaned = 0.0526302 Jy ! Component: 1600 - total flux cleaned = 0.0530586 Jy ! Component: 1650 - total flux cleaned = 0.052634 Jy ! Component: 1700 - total flux cleaned = 0.0532647 Jy ! Component: 1750 - total flux cleaned = 0.0530614 Jy ! Component: 1800 - total flux cleaned = 0.0536721 Jy ! Component: 1850 - total flux cleaned = 0.0540735 Jy ! Component: 1900 - total flux cleaned = 0.0544703 Jy ! Component: 1950 - total flux cleaned = 0.0538778 Jy ! Component: 2000 - total flux cleaned = 0.0542682 Jy ! Component: 2050 - total flux cleaned = 0.0546543 Jy ! Component: 2100 - total flux cleaned = 0.0546536 Jy ! Component: 2150 - total flux cleaned = 0.0556037 Jy ! Component: 2200 - total flux cleaned = 0.0561677 Jy ! Component: 2250 - total flux cleaned = 0.056909 Jy ! Component: 2300 - total flux cleaned = 0.0578304 Jy ! Component: 2350 - total flux cleaned = 0.0583797 Jy ! Component: 2400 - total flux cleaned = 0.0592865 Jy ! Component: 2450 - total flux cleaned = 0.0598259 Jy ! Component: 2500 - total flux cleaned = 0.0608946 Jy ! Component: 2550 - total flux cleaned = 0.061248 Jy ! Component: 2600 - total flux cleaned = 0.0617766 Jy ! Component: 2650 - total flux cleaned = 0.0628205 Jy ! Component: 2700 - total flux cleaned = 0.0631645 Jy ! Component: 2750 - total flux cleaned = 0.0631626 Jy ! Component: 2800 - total flux cleaned = 0.0638437 Jy ! Component: 2850 - total flux cleaned = 0.0643501 Jy ! Component: 2900 - total flux cleaned = 0.0646849 Jy ! Component: 2950 - total flux cleaned = 0.0650202 Jy ! Component: 3000 - total flux cleaned = 0.0655189 Jy ! Component: 3050 - total flux cleaned = 0.0663431 Jy ! Component: 3100 - total flux cleaned = 0.0671625 Jy ! Component: 3150 - total flux cleaned = 0.0676525 Jy ! Component: 3200 - total flux cleaned = 0.0684643 Jy ! Component: 3250 - total flux cleaned = 0.0691109 Jy ! Component: 3300 - total flux cleaned = 0.0699133 Jy ! Component: 3350 - total flux cleaned = 0.0702324 Jy ! Component: 3400 - total flux cleaned = 0.0708702 Jy ! Component: 3450 - total flux cleaned = 0.0710291 Jy ! Component: 3500 - total flux cleaned = 0.0715028 Jy ! Component: 3550 - total flux cleaned = 0.0716619 Jy ! Component: 3600 - total flux cleaned = 0.0721337 Jy ! Component: 3650 - total flux cleaned = 0.0726034 Jy ! Component: 3700 - total flux cleaned = 0.0726032 Jy ! Component: 3750 - total flux cleaned = 0.0732249 Jy ! Component: 3800 - total flux cleaned = 0.0735343 Jy ! Component: 3850 - total flux cleaned = 0.0738427 Jy ! Component: 3900 - total flux cleaned = 0.073689 Jy ! Component: 3950 - total flux cleaned = 0.0739962 Jy ! Component: 4000 - total flux cleaned = 0.074761 Jy ! Component: 4050 - total flux cleaned = 0.0744561 Jy ! Total flux subtracted in 4096 components = 0.0747603 Jy ! Clean residual min=-0.007618 max=0.007712 Jy/beam ! Clean residual mean=-0.000072 rms=0.003519 Jy/beam ! Combined flux in latest and established models = 0.519867 Jy keep ! Adding 472 model components to the UV plane model. ! The established model now contains 613 components and 0.519867 Jy ![Exited script file: muppet] wmap "J1823-2726_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.556 x 40.92 at -5.55 degrees (North through East) ! Clean map min=-0.030117 max=0.2646 Jy/beam ! Writing clean map to FITS file: J1823-2726_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.264602 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00349132 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.95838 3.95838 7.91675 15.8335 31.667 63.334 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0104 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.264 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.556 x 40.92 at -5.55 degrees (North through East) ! Clean map min=-0.030117 max=0.2646 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1823-2726_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:04:43 2019