! Started logfile: J1823+6857_S_2017_03_23_pus_uvs.log on Mon May 13 10:06:58 2019 obs J1823+6857_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1823+6857_S_2017_03_23_pus_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.575926 visibilities/baseline/integration-bin. ! Found source: J1823+6857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 1244 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1823+6857_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.746132Jy sigma=0.006703 ! Fit after self-cal, rms=0.731641Jy sigma=0.006580 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=13.14 mas, bpa=51.71 degrees ! Estimated noise=3157.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.196707 Jy ! Component: 100 - total flux cleaned = 0.241555 Jy ! Total flux subtracted in 100 components = 0.241555 Jy ! Clean residual min=-0.020535 max=0.025028 Jy/beam ! Clean residual mean=-0.000230 rms=0.006439 Jy/beam ! Combined flux in latest and established models = 0.241555 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.241555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107803Jy sigma=0.000896 ! Fit after self-cal, rms=0.107795Jy sigma=0.000896 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.449 mas, bmaj=13.05 mas, bpa=51.62 degrees ! Estimated noise=2431.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0328778 Jy ! Component: 100 - total flux cleaned = 0.0499284 Jy ! Component: 150 - total flux cleaned = 0.0601689 Jy ! Component: 200 - total flux cleaned = 0.0668632 Jy ! Total flux subtracted in 200 components = 0.0668632 Jy ! Clean residual min=-0.014413 max=0.012611 Jy/beam ! Clean residual mean=-0.000240 rms=0.003848 Jy/beam ! Combined flux in latest and established models = 0.308418 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 55 components and 0.308418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096349Jy sigma=0.000807 ! Fit after self-cal, rms=0.096342Jy sigma=0.000807 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 1.00* KP 1.07 ! LA 1.00 MK 1.04 NL 0.86 OV 0.93 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.00* KP 0.97 ! LA 1.02 MK 0.96 NL 1.03 OV 0.98 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.07 HN 1.00* KP 0.90 ! LA 0.74 MK 1.01 NL 1.17 OV 0.89 ! PT 0.92 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.10 HN 1.00* KP 1.00* ! LA 0.84 MK 1.03 NL 1.00* OV 2.56 ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.096342Jy sigma=0.000807 ! Fit after self-cal, rms=0.079715Jy sigma=0.000648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.475 mas, bmaj=13.12 mas, bpa=51.5 degrees ! Estimated noise=2417.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00228861 Jy ! Component: 100 - total flux cleaned = -0.00276028 Jy ! Component: 150 - total flux cleaned = -0.0031484 Jy ! Component: 200 - total flux cleaned = -0.00334383 Jy ! Total flux subtracted in 200 components = -0.00334383 Jy ! Clean residual min=-0.006005 max=0.005616 Jy/beam ! Clean residual mean=-0.000049 rms=0.001576 Jy/beam ! Combined flux in latest and established models = 0.305075 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 85 components and 0.305075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079464Jy sigma=0.000646 ! Fit after self-cal, rms=0.079829Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079829Jy sigma=0.000645 ! Fit after self-cal, rms=0.079889Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.472 mas, bmaj=13.13 mas, bpa=51.46 degrees ! Estimated noise=2412.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020096 Jy ! Component: 100 - total flux cleaned = -0.00220596 Jy ! Component: 150 - total flux cleaned = -0.00241342 Jy ! Component: 200 - total flux cleaned = -0.00255253 Jy ! Total flux subtracted in 200 components = -0.00255253 Jy ! Clean residual min=-0.005849 max=0.005218 Jy/beam ! Clean residual mean=-0.000046 rms=0.001482 Jy/beam ! Combined flux in latest and established models = 0.302522 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 99 components and 0.302522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079766Jy sigma=0.000644 ! Fit after self-cal, rms=0.079783Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000373748 Jy ! Component: 100 - total flux cleaned = -0.000335353 Jy ! Component: 150 - total flux cleaned = -0.000373751 Jy ! Component: 200 - total flux cleaned = -0.000339592 Jy ! Total flux subtracted in 200 components = -0.000339592 Jy ! Clean residual min=-0.005743 max=0.005136 Jy/beam ! Clean residual mean=-0.000048 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.302182 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 107 components and 0.302182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079735Jy sigma=0.000644 ! Fit after self-cal, rms=0.079739Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079739Jy sigma=0.000644 ! Fit after self-cal, rms=0.079784Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.469 mas, bmaj=13.14 mas, bpa=51.43 degrees ! Estimated noise=2411.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137634 Jy ! Component: 100 - total flux cleaned = -0.00141722 Jy ! Component: 150 - total flux cleaned = -0.00141565 Jy ! Component: 200 - total flux cleaned = -0.00144693 Jy ! Total flux subtracted in 200 components = -0.00144693 Jy ! Clean residual min=-0.005674 max=0.004906 Jy/beam ! Clean residual mean=-0.000042 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.300736 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 117 components and 0.300735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079740Jy sigma=0.000643 ! Fit after self-cal, rms=0.079746Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136587 Jy ! Component: 100 - total flux cleaned = -0.00010784 Jy ! Component: 150 - total flux cleaned = -8.11175e-05 Jy ! Component: 200 - total flux cleaned = -0.000107147 Jy ! Total flux subtracted in 200 components = -0.000107147 Jy ! Clean residual min=-0.005600 max=0.004837 Jy/beam ! Clean residual mean=-0.000043 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.300628 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 128 components and 0.300628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079725Jy sigma=0.000643 ! Fit after self-cal, rms=0.079726Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079726Jy sigma=0.000643 ! Fit after self-cal, rms=0.079757Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.297 mas, bmaj=13.68 mas, bpa=55.85 degrees ! Estimated noise=2658.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000761211 Jy ! Component: 100 - total flux cleaned = -0.000921839 Jy ! Component: 150 - total flux cleaned = -0.000944554 Jy ! Component: 200 - total flux cleaned = -0.000943806 Jy ! Total flux subtracted in 200 components = -0.000943806 Jy ! Clean residual min=-0.006053 max=0.005025 Jy/beam ! Clean residual mean=-0.000058 rms=0.001669 Jy/beam ! Combined flux in latest and established models = 0.299684 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 144 components and 0.299684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079741Jy sigma=0.000643 ! Fit after self-cal, rms=0.079744Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.03292e-05 Jy ! Component: 100 - total flux cleaned = -2.01494e-05 Jy ! Component: 150 - total flux cleaned = 1.25638e-05 Jy ! Component: 200 - total flux cleaned = 1.25439e-05 Jy ! Total flux subtracted in 200 components = 1.25439e-05 Jy ! Clean residual min=-0.006016 max=0.005023 Jy/beam ! Clean residual mean=-0.000058 rms=0.001663 Jy/beam ! Combined flux in latest and established models = 0.299697 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 149 components and 0.299697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079739Jy sigma=0.000643 ! Fit after self-cal, rms=0.079739Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.465 mas, bmaj=13.16 mas, bpa=51.41 degrees ! Estimated noise=2409.57 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.465 x 13.16 at 51.41 degrees (North through East) ! Clean map min=-0.0054693 max=0.2685 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.483 mas, bmaj=13.08 mas, bpa=51.57 degrees ! Estimated noise=3262.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202787 Jy ! Component: 100 - total flux cleaned = 0.248738 Jy ! Component: 150 - total flux cleaned = 0.267348 Jy ! Component: 200 - total flux cleaned = 0.277319 Jy ! Total flux subtracted in 200 components = 0.277319 Jy ! Clean residual min=-0.007030 max=0.007332 Jy/beam ! Clean residual mean=-0.000075 rms=0.001850 Jy/beam ! Combined flux in latest and established models = 0.277319 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.277319 Jy ! Inverting map and beam ! Estimated beam: bmin=4.465 mas, bmaj=13.16 mas, bpa=51.41 degrees ! Estimated noise=2409.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.5, -102). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00967009 Jy ! Component: 100 - total flux cleaned = 0.0154923 Jy ! Component: 150 - total flux cleaned = 0.0182941 Jy ! Component: 200 - total flux cleaned = 0.0194167 Jy ! Total flux subtracted in 200 components = 0.0194167 Jy ! Clean residual min=-0.005995 max=0.004774 Jy/beam ! Clean residual mean=-0.000054 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.296736 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 80 components and 0.296736 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.297 mas, bmaj=13.68 mas, bpa=55.85 degrees ! Estimated noise=2658.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311643 Jy ! Component: 100 - total flux cleaned = 0.00435175 Jy ! Component: 150 - total flux cleaned = 0.00520802 Jy ! Component: 200 - total flux cleaned = 0.00573121 Jy ! Total flux subtracted in 200 components = 0.00573121 Jy ! Clean residual min=-0.005638 max=0.003880 Jy/beam ! Clean residual mean=-0.000044 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.302467 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000339635 Jy ! Component: 100 - total flux cleaned = 0.000646503 Jy ! Component: 150 - total flux cleaned = 0.000924387 Jy ! Component: 200 - total flux cleaned = 0.00113684 Jy ! Total flux subtracted in 200 components = 0.00113684 Jy ! Clean residual min=-0.005229 max=0.003789 Jy/beam ! Clean residual mean=-0.000033 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.303604 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 140 components and 0.303604 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.465 mas, bmaj=13.16 mas, bpa=51.41 degrees ! Estimated noise=2409.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224206 Jy ! Component: 100 - total flux cleaned = -0.000174895 Jy ! Component: 150 - total flux cleaned = 2.00724e-05 Jy ! Component: 200 - total flux cleaned = 2.15163e-05 Jy ! Total flux subtracted in 200 components = 2.15163e-05 Jy ! Clean residual min=-0.004739 max=0.003683 Jy/beam ! Clean residual mean=-0.000023 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.303625 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 166 components and 0.303625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079387Jy sigma=0.000640 ! Fit after self-cal, rms=0.079367Jy sigma=0.000640 wmodel J1823+6857_S_2017_03_23_pus_map.mod ! Writing 166 model components to file: J1823+6857_S_2017_03_23_pus_map.mod wobs J1823+6857_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1823+6857_S_2017_03_23_pus_uvs.fits wwins J1823+6857_S_2017_03_23_pus_map.win ! wwins: Wrote 2 windows to J1823+6857_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146874 Jy ! Component: 100 - total flux cleaned = -0.00097879 Jy ! Component: 150 - total flux cleaned = -0.000591125 Jy ! Component: 200 - total flux cleaned = -7.87165e-05 Jy ! Component: 250 - total flux cleaned = 6.64263e-05 Jy ! Component: 300 - total flux cleaned = 0.000205936 Jy ! Component: 350 - total flux cleaned = 0.000205622 Jy ! Component: 400 - total flux cleaned = 0.000377898 Jy ! Component: 450 - total flux cleaned = 0.000503535 Jy ! Component: 500 - total flux cleaned = 0.000627021 Jy ! Component: 550 - total flux cleaned = 0.000747954 Jy ! Component: 600 - total flux cleaned = 0.000826962 Jy ! Component: 650 - total flux cleaned = 0.000904376 Jy ! Component: 700 - total flux cleaned = 0.00105582 Jy ! Component: 750 - total flux cleaned = 0.00109272 Jy ! Component: 800 - total flux cleaned = 0.00120263 Jy ! Component: 850 - total flux cleaned = 0.00127463 Jy ! Component: 900 - total flux cleaned = 0.00138104 Jy ! Component: 950 - total flux cleaned = 0.00145117 Jy ! Component: 1000 - total flux cleaned = 0.00152037 Jy ! Component: 1050 - total flux cleaned = 0.00158897 Jy ! Component: 1100 - total flux cleaned = 0.00165658 Jy ! Component: 1150 - total flux cleaned = 0.00165659 Jy ! Component: 1200 - total flux cleaned = 0.00165672 Jy ! Component: 1250 - total flux cleaned = 0.00162356 Jy ! Component: 1300 - total flux cleaned = 0.00168956 Jy ! Component: 1350 - total flux cleaned = 0.0016893 Jy ! Component: 1400 - total flux cleaned = 0.00172202 Jy ! Component: 1450 - total flux cleaned = 0.00178798 Jy ! Component: 1500 - total flux cleaned = 0.00182098 Jy ! Component: 1550 - total flux cleaned = 0.0018208 Jy ! Component: 1600 - total flux cleaned = 0.00178745 Jy ! Component: 1650 - total flux cleaned = 0.00172098 Jy ! Component: 1700 - total flux cleaned = 0.0016875 Jy ! Component: 1750 - total flux cleaned = 0.00165357 Jy ! Component: 1800 - total flux cleaned = 0.00165335 Jy ! Component: 1850 - total flux cleaned = 0.00161891 Jy ! Component: 1900 - total flux cleaned = 0.00151362 Jy ! Component: 1950 - total flux cleaned = 0.0014424 Jy ! Component: 2000 - total flux cleaned = 0.00136981 Jy ! Component: 2050 - total flux cleaned = 0.00129574 Jy ! Component: 2100 - total flux cleaned = 0.00121996 Jy ! Component: 2150 - total flux cleaned = 0.00118129 Jy ! Component: 2200 - total flux cleaned = 0.00114245 Jy ! Component: 2250 - total flux cleaned = 0.001023 Jy ! Component: 2300 - total flux cleaned = 0.000900962 Jy ! Component: 2350 - total flux cleaned = 0.000858949 Jy ! Component: 2400 - total flux cleaned = 0.0007749 Jy ! Component: 2450 - total flux cleaned = 0.000688141 Jy ! Component: 2500 - total flux cleaned = 0.000644167 Jy ! Component: 2550 - total flux cleaned = 0.000554008 Jy ! Component: 2600 - total flux cleaned = 0.000553564 Jy ! Component: 2650 - total flux cleaned = 0.000460912 Jy ! Component: 2700 - total flux cleaned = 0.000366463 Jy ! Component: 2750 - total flux cleaned = 0.000269827 Jy ! Component: 2800 - total flux cleaned = 0.000220677 Jy ! Component: 2850 - total flux cleaned = 0.000120332 Jy ! Component: 2900 - total flux cleaned = 6.90671e-05 Jy ! Component: 2950 - total flux cleaned = -3.67094e-05 Jy ! Component: 3000 - total flux cleaned = -9.06103e-05 Jy ! Component: 3050 - total flux cleaned = -0.000145458 Jy ! Component: 3100 - total flux cleaned = -0.000257603 Jy ! Component: 3150 - total flux cleaned = -0.000257391 Jy ! Component: 3200 - total flux cleaned = -0.000315343 Jy ! Component: 3250 - total flux cleaned = -0.000434888 Jy ! Component: 3300 - total flux cleaned = -0.000496188 Jy ! Component: 3350 - total flux cleaned = -0.000558612 Jy ! Component: 3400 - total flux cleaned = -0.000623538 Jy ! Component: 3450 - total flux cleaned = -0.000622578 Jy ! Component: 3500 - total flux cleaned = -0.000756243 Jy ! Component: 3550 - total flux cleaned = -0.000824751 Jy ! Component: 3600 - total flux cleaned = -0.000824486 Jy ! Component: 3650 - total flux cleaned = -0.000824269 Jy ! Component: 3700 - total flux cleaned = -0.000824012 Jy ! Component: 3750 - total flux cleaned = -0.000824275 Jy ! Component: 3800 - total flux cleaned = -0.000900175 Jy ! Component: 3850 - total flux cleaned = -0.000900952 Jy ! Component: 3900 - total flux cleaned = -0.000901945 Jy ! Component: 3950 - total flux cleaned = -0.000902212 Jy ! Component: 4000 - total flux cleaned = -0.000902074 Jy ! Component: 4050 - total flux cleaned = -0.000988731 Jy ! Total flux subtracted in 4096 components = -0.000990069 Jy ! Clean residual min=-0.006418 max=0.005196 Jy/beam ! Clean residual mean=0.000040 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.302635 Jy keep ! Adding 198 model components to the UV plane model. ! The established model now contains 364 components and 0.302635 Jy ![Exited script file: muppet] wmap "J1823+6857_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.465 x 13.16 at 51.41 degrees (North through East) ! Clean map min=-0.010255 max=0.26379 Jy/beam ! Writing clean map to FITS file: J1823+6857_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.263795 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00162044 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.84285 1.84285 3.6857 7.37139 14.7428 29.4856 58.9711 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0048 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.263 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.465 x 13.16 at 51.41 degrees (North through East) ! Clean map min=-0.010255 max=0.26379 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1823+6857_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:07:03 2019