! Started logfile: J1819-2036_S_2017_06_10_pus_uvs.log on Mon May 6 14:59:51 2019 obs J1819-2036_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1819-2036_S_2017_06_10_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.963372 visibilities/baseline/integration-bin. ! Found source: J1819-2036 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 25144 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1819-2036_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 900 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.991635Jy sigma=0.007861 ! Fit after self-cal, rms=0.954677Jy sigma=0.007581 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.426 mas, bmaj=7.12 mas, bpa=-5.153 degrees ! Estimated noise=1047.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355591 Jy ! Component: 100 - total flux cleaned = 0.0444447 Jy ! Total flux subtracted in 100 components = 0.0444447 Jy ! Clean residual min=-0.004154 max=0.005813 Jy/beam ! Clean residual mean=-0.000051 rms=0.001530 Jy/beam ! Combined flux in latest and established models = 0.0444447 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0444447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091041Jy sigma=0.000707 ! Fit after self-cal, rms=0.089967Jy sigma=0.000699 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=8.011 mas, bpa=-4.504 degrees ! Estimated noise=681.502 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101119 Jy ! Component: 100 - total flux cleaned = 0.0156837 Jy ! Component: 150 - total flux cleaned = 0.0189605 Jy ! Component: 200 - total flux cleaned = 0.0208942 Jy ! Total flux subtracted in 200 components = 0.0208942 Jy ! Clean residual min=-0.005630 max=0.009771 Jy/beam ! Clean residual mean=-0.000096 rms=0.002485 Jy/beam ! Combined flux in latest and established models = 0.0653389 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 41 components and 0.0653389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088939Jy sigma=0.000689 ! Fit after self-cal, rms=0.088864Jy sigma=0.000688 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.47 FD 1.07 HN 1.26 KP 1.00 ! LA 0.74 MK 1.27 NL 1.50 OV 1.99 ! PT 0.64 SC 1.23 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.28 KP 0.93 ! LA 0.67 MK 1.25 NL 1.66 OV 1.77 ! PT 0.64 SC 1.38 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 1.18 KP 0.86 ! LA 0.71 MK 1.16 NL 1.52 OV 1.51 ! PT 0.63 SC 1.19 ! ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.92 KP 1.00* ! LA 1.00* MK 0.82 NL 1.00* OV 1.00* ! PT 0.73 SC 1.00* ! ! ! Fit before self-cal, rms=0.088864Jy sigma=0.000688 ! Fit after self-cal, rms=0.124798Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.63 mas, bpa=-5.361 degrees ! Estimated noise=740.377 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-50.5, 69.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00818991 Jy ! Component: 100 - total flux cleaned = 0.0104989 Jy ! Component: 150 - total flux cleaned = 0.0108297 Jy ! Component: 200 - total flux cleaned = 0.0107388 Jy ! Total flux subtracted in 200 components = 0.0107388 Jy ! Clean residual min=-0.003685 max=0.008270 Jy/beam ! Clean residual mean=-0.000018 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 0.0760777 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.0760777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123954Jy sigma=0.000662 ! Fit after self-cal, rms=0.125895Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125895Jy sigma=0.000653 ! Fit after self-cal, rms=0.137581Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=8.72 mas, bpa=-6.175 degrees ! Estimated noise=757.996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328634 Jy ! Component: 100 - total flux cleaned = 0.00327401 Jy ! Component: 150 - total flux cleaned = 0.00320042 Jy ! Component: 200 - total flux cleaned = 0.00307365 Jy ! Total flux subtracted in 200 components = 0.00307365 Jy ! Clean residual min=-0.003347 max=0.004905 Jy/beam ! Clean residual mean=-0.000012 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.0791513 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.0791514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137353Jy sigma=0.000651 ! Fit after self-cal, rms=0.137310Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (50, -69.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420098 Jy ! Component: 100 - total flux cleaned = 0.0048728 Jy ! Component: 150 - total flux cleaned = 0.00494959 Jy ! Component: 200 - total flux cleaned = 0.00501369 Jy ! Total flux subtracted in 200 components = 0.00501369 Jy ! Clean residual min=-0.002914 max=0.003507 Jy/beam ! Clean residual mean=-0.000006 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.0841651 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.0841651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137070Jy sigma=0.000649 ! Fit after self-cal, rms=0.136451Jy sigma=0.000648 ! Inverting map ! Added new window around map position (13.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334395 Jy ! Component: 100 - total flux cleaned = 0.00344313 Jy ! Component: 150 - total flux cleaned = 0.00352818 Jy ! Component: 200 - total flux cleaned = 0.00345289 Jy ! Total flux subtracted in 200 components = 0.00345289 Jy ! Clean residual min=-0.002947 max=0.003784 Jy/beam ! Clean residual mean=0.000001 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.0876179 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 95 components and 0.0876179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136220Jy sigma=0.000647 ! Fit after self-cal, rms=0.135786Jy sigma=0.000647 ! Inverting map ! Added new window around map position (100.5, -32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388148 Jy ! Component: 100 - total flux cleaned = 0.00618462 Jy ! Component: 150 - total flux cleaned = 0.00697797 Jy ! Component: 200 - total flux cleaned = 0.00737553 Jy ! Total flux subtracted in 200 components = 0.00737553 Jy ! Clean residual min=-0.002846 max=0.002861 Jy/beam ! Clean residual mean=-0.000002 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.0949935 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 109 components and 0.0949935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135538Jy sigma=0.000646 ! Fit after self-cal, rms=0.135187Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135187Jy sigma=0.000645 ! Fit after self-cal, rms=0.122975Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=8.56 mas, bpa=-6.063 degrees ! Estimated noise=731.385 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266347 Jy ! Component: 100 - total flux cleaned = 0.00440004 Jy ! Component: 150 - total flux cleaned = 0.00465421 Jy ! Component: 200 - total flux cleaned = 0.00476555 Jy ! Total flux subtracted in 200 components = 0.00476555 Jy ! Clean residual min=-0.002447 max=0.002750 Jy/beam ! Clean residual mean=-0.000003 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.099759 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 123 components and 0.099759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122861Jy sigma=0.000643 ! Fit after self-cal, rms=0.122249Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-28, 58). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244657 Jy ! Component: 100 - total flux cleaned = 0.00276483 Jy ! Component: 150 - total flux cleaned = 0.00289896 Jy ! Component: 200 - total flux cleaned = 0.00290203 Jy ! Total flux subtracted in 200 components = 0.00290203 Jy ! Clean residual min=-0.002476 max=0.002550 Jy/beam ! Clean residual mean=0.000001 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.102661 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 138 components and 0.102661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122099Jy sigma=0.000642 ! Fit after self-cal, rms=0.121815Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121815Jy sigma=0.000642 ! Fit after self-cal, rms=0.114451Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.986 mas, bmaj=20.17 mas, bpa=-2.085 degrees ! Estimated noise=853.973 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133328 Jy ! Component: 100 - total flux cleaned = 0.00133305 Jy ! Component: 150 - total flux cleaned = 0.00145315 Jy ! Component: 200 - total flux cleaned = 0.00161575 Jy ! Total flux subtracted in 200 components = 0.00161575 Jy ! Clean residual min=-0.002748 max=0.002829 Jy/beam ! Clean residual mean=-0.000001 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.104277 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 153 components and 0.104277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114380Jy sigma=0.000641 ! Fit after self-cal, rms=0.114064Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000609452 Jy ! Component: 100 - total flux cleaned = 0.00041093 Jy ! Component: 150 - total flux cleaned = 0.000408784 Jy ! Component: 200 - total flux cleaned = 0.000507366 Jy ! Total flux subtracted in 200 components = 0.000507366 Jy ! Clean residual min=-0.002573 max=0.002765 Jy/beam ! Clean residual mean=-0.000000 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.104784 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 160 components and 0.104784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114004Jy sigma=0.000641 ! Fit after self-cal, rms=0.113874Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=8.466 mas, bpa=-5.73 degrees ! Estimated noise=717.417 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.061 x 8.466 at -5.73 degrees (North through East) ! Clean map min=-0.0040496 max=0.051019 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.507 mas, bmaj=7.347 mas, bpa=-6.379 degrees ! Estimated noise=1165.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0390542 Jy ! Component: 100 - total flux cleaned = 0.055662 Jy ! Component: 150 - total flux cleaned = 0.0672197 Jy ! Component: 200 - total flux cleaned = 0.0758205 Jy ! Total flux subtracted in 200 components = 0.0758205 Jy ! Clean residual min=-0.005580 max=0.006015 Jy/beam ! Clean residual mean=-0.000015 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.0758205 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0758205 Jy ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=8.466 mas, bpa=-5.73 degrees ! Estimated noise=717.417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00866096 Jy ! Component: 100 - total flux cleaned = 0.0130717 Jy ! Component: 150 - total flux cleaned = 0.0167362 Jy ! Component: 200 - total flux cleaned = 0.0186431 Jy ! Total flux subtracted in 200 components = 0.0186431 Jy ! Clean residual min=-0.003476 max=0.003262 Jy/beam ! Clean residual mean=-0.000005 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.0944636 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 49 components and 0.0944636 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.986 mas, bmaj=20.17 mas, bpa=-2.085 degrees ! Estimated noise=853.973 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321171 Jy ! Component: 100 - total flux cleaned = 0.00421874 Jy ! Component: 150 - total flux cleaned = 0.00508759 Jy ! Component: 200 - total flux cleaned = 0.00576064 Jy ! Total flux subtracted in 200 components = 0.00576064 Jy ! Clean residual min=-0.003205 max=0.003013 Jy/beam ! Clean residual mean=-0.000001 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.100224 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000768291 Jy ! Component: 100 - total flux cleaned = 0.00129825 Jy ! Component: 150 - total flux cleaned = 0.00184051 Jy ! Component: 200 - total flux cleaned = 0.00226699 Jy ! Total flux subtracted in 200 components = 0.00226699 Jy ! Clean residual min=-0.002769 max=0.003007 Jy/beam ! Clean residual mean=-0.000002 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.102491 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 93 components and 0.102491 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=8.466 mas, bpa=-5.73 degrees ! Estimated noise=717.417 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135205 Jy ! Component: 100 - total flux cleaned = 0.00214244 Jy ! Component: 150 - total flux cleaned = 0.00268919 Jy ! Component: 200 - total flux cleaned = 0.00304621 Jy ! Total flux subtracted in 200 components = 0.00304621 Jy ! Clean residual min=-0.002398 max=0.002427 Jy/beam ! Clean residual mean=0.000000 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.105537 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 118 components and 0.105537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113976Jy sigma=0.000641 ! Fit after self-cal, rms=0.113860Jy sigma=0.000640 wmodel J1819-2036_S_2017_06_10_pus_map.mod ! Writing 118 model components to file: J1819-2036_S_2017_06_10_pus_map.mod wobs J1819-2036_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1819-2036_S_2017_06_10_pus_uvs.fits wwins J1819-2036_S_2017_06_10_pus_map.win ! wwins: Wrote 7 windows to J1819-2036_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000761232 Jy ! Component: 100 - total flux cleaned = 0.00104538 Jy ! Component: 150 - total flux cleaned = 0.00119783 Jy ! Component: 200 - total flux cleaned = 0.00130602 Jy ! Component: 250 - total flux cleaned = 0.00162087 Jy ! Component: 300 - total flux cleaned = 0.00185719 Jy ! Component: 350 - total flux cleaned = 0.00211961 Jy ! Component: 400 - total flux cleaned = 0.00231189 Jy ! Component: 450 - total flux cleaned = 0.00253123 Jy ! Component: 500 - total flux cleaned = 0.00268479 Jy ! Component: 550 - total flux cleaned = 0.00283496 Jy ! Component: 600 - total flux cleaned = 0.002952 Jy ! Component: 650 - total flux cleaned = 0.00298149 Jy ! Component: 700 - total flux cleaned = 0.00309449 Jy ! Component: 750 - total flux cleaned = 0.00312196 Jy ! Component: 800 - total flux cleaned = 0.00317647 Jy ! Component: 850 - total flux cleaned = 0.0032567 Jy ! Component: 900 - total flux cleaned = 0.00333638 Jy ! Component: 950 - total flux cleaned = 0.00346641 Jy ! Component: 1000 - total flux cleaned = 0.0036714 Jy ! Component: 1050 - total flux cleaned = 0.00384802 Jy ! Component: 1100 - total flux cleaned = 0.00392259 Jy ! Component: 1150 - total flux cleaned = 0.00414378 Jy ! Component: 1200 - total flux cleaned = 0.00419141 Jy ! Component: 1250 - total flux cleaned = 0.00428704 Jy ! Component: 1300 - total flux cleaned = 0.00428712 Jy ! Component: 1350 - total flux cleaned = 0.00435736 Jy ! Component: 1400 - total flux cleaned = 0.00449585 Jy ! Component: 1450 - total flux cleaned = 0.00447339 Jy ! Component: 1500 - total flux cleaned = 0.00463162 Jy ! Component: 1550 - total flux cleaned = 0.00472079 Jy ! Component: 1600 - total flux cleaned = 0.00474284 Jy ! Component: 1650 - total flux cleaned = 0.00483001 Jy ! Component: 1700 - total flux cleaned = 0.00483048 Jy ! Component: 1750 - total flux cleaned = 0.00493751 Jy ! Component: 1800 - total flux cleaned = 0.00502211 Jy ! Component: 1850 - total flux cleaned = 0.00502243 Jy ! Component: 1900 - total flux cleaned = 0.00518783 Jy ! Component: 1950 - total flux cleaned = 0.00522885 Jy ! Component: 2000 - total flux cleaned = 0.00531041 Jy ! Component: 2050 - total flux cleaned = 0.00547087 Jy ! Component: 2100 - total flux cleaned = 0.00551068 Jy ! Component: 2150 - total flux cleaned = 0.00556979 Jy ! Component: 2200 - total flux cleaned = 0.00570605 Jy ! Component: 2250 - total flux cleaned = 0.0057834 Jy ! Component: 2300 - total flux cleaned = 0.00585978 Jy ! Component: 2350 - total flux cleaned = 0.00593538 Jy ! Component: 2400 - total flux cleaned = 0.0059914 Jy ! Component: 2450 - total flux cleaned = 0.00610283 Jy ! Component: 2500 - total flux cleaned = 0.00612085 Jy ! Component: 2550 - total flux cleaned = 0.00619368 Jy ! Component: 2600 - total flux cleaned = 0.00619355 Jy ! Component: 2650 - total flux cleaned = 0.00626546 Jy ! Component: 2700 - total flux cleaned = 0.00638961 Jy ! Component: 2750 - total flux cleaned = 0.00642478 Jy ! Component: 2800 - total flux cleaned = 0.00647701 Jy ! Component: 2850 - total flux cleaned = 0.0065979 Jy ! Component: 2900 - total flux cleaned = 0.00661478 Jy ! Component: 2950 - total flux cleaned = 0.00666576 Jy ! Component: 3000 - total flux cleaned = 0.00676698 Jy ! Component: 3050 - total flux cleaned = 0.00681693 Jy ! Component: 3100 - total flux cleaned = 0.00689998 Jy ! Component: 3150 - total flux cleaned = 0.00694925 Jy ! Component: 3200 - total flux cleaned = 0.00704718 Jy ! Component: 3250 - total flux cleaned = 0.00707975 Jy ! Component: 3300 - total flux cleaned = 0.00709588 Jy ! Component: 3350 - total flux cleaned = 0.00711199 Jy ! Component: 3400 - total flux cleaned = 0.00725494 Jy ! Component: 3450 - total flux cleaned = 0.00730212 Jy ! Component: 3500 - total flux cleaned = 0.00733353 Jy ! Component: 3550 - total flux cleaned = 0.00739597 Jy ! Component: 3600 - total flux cleaned = 0.00745773 Jy ! Component: 3650 - total flux cleaned = 0.00748836 Jy ! Component: 3700 - total flux cleaned = 0.00754945 Jy ! Component: 3750 - total flux cleaned = 0.00756458 Jy ! Component: 3800 - total flux cleaned = 0.00757954 Jy ! Component: 3850 - total flux cleaned = 0.00754949 Jy ! Component: 3900 - total flux cleaned = 0.00759438 Jy ! Component: 3950 - total flux cleaned = 0.00757966 Jy ! Component: 4000 - total flux cleaned = 0.00765338 Jy ! Component: 4050 - total flux cleaned = 0.00765318 Jy ! Total flux subtracted in 4096 components = 0.00765323 Jy ! Clean residual min=-0.000882 max=0.000767 Jy/beam ! Clean residual mean=-0.000003 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.113191 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 395 components and 0.113191 Jy ![Exited script file: muppet] wmap "J1819-2036_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.061 x 8.466 at -5.73 degrees (North through East) ! Clean map min=-0.0041706 max=0.052102 Jy/beam ! Writing clean map to FITS file: J1819-2036_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.052102 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000262704 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.51263 1.51263 3.02527 6.05053 12.1011 24.2021 48.4043 96.8085 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.061 x 8.466 at -5.73 degrees (North through East) ! Clean map min=-0.0041706 max=0.052102 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1819-2036_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:59:56 2019