! Started logfile: J1819+5511_S_2017_08_05_pus_uvs.log on Thu May 9 19:35:01 2019 obs J1819+5511_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1819+5511_S_2017_08_05_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.965978 visibilities/baseline/integration-bin. ! Found source: J1819+5511 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 19648 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1819+5511_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 676 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.911822Jy sigma=0.008890 ! Fit after self-cal, rms=0.904885Jy sigma=0.008831 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=4.268 mas, bpa=-19.64 degrees ! Estimated noise=915.495 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0748951 Jy ! Component: 100 - total flux cleaned = 0.091263 Jy ! Total flux subtracted in 100 components = 0.091263 Jy ! Clean residual min=-0.003545 max=0.004849 Jy/beam ! Clean residual mean=-0.000002 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.091263 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.091263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074831Jy sigma=0.000679 ! Fit after self-cal, rms=0.074826Jy sigma=0.000679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.681 mas, bmaj=5.015 mas, bpa=-12.54 degrees ! Estimated noise=601.145 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00582093 Jy ! Component: 100 - total flux cleaned = 0.00847557 Jy ! Component: 150 - total flux cleaned = 0.00993247 Jy ! Component: 200 - total flux cleaned = 0.0103479 Jy ! Total flux subtracted in 200 components = 0.0103479 Jy ! Clean residual min=-0.002560 max=0.002535 Jy/beam ! Clean residual mean=-0.000006 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.101611 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 30 components and 0.101611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074308Jy sigma=0.000675 ! Fit after self-cal, rms=0.074315Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.95 KP 1.02 ! LA 1.01 MK 1.03 NL 0.91 OV 1.05 ! PT 1.03 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.05 HN 1.00 KP 1.04 ! LA 0.96 MK 1.02 NL 1.12 OV 1.03 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.09 HN 0.99 KP 0.88 ! LA 0.78 MK 1.07 NL 1.13 OV 0.96 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 0.92 KP 1.00* ! LA 0.66 MK 1.30 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.074315Jy sigma=0.000675 ! Fit after self-cal, rms=0.071948Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.72 mas, bmaj=5.044 mas, bpa=-12.1 degrees ! Estimated noise=599.755 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000423212 Jy ! Component: 100 - total flux cleaned = -0.000551188 Jy ! Component: 150 - total flux cleaned = -0.000609627 Jy ! Component: 200 - total flux cleaned = -0.000635638 Jy ! Total flux subtracted in 200 components = -0.000635638 Jy ! Clean residual min=-0.002164 max=0.002115 Jy/beam ! Clean residual mean=-0.000012 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.100975 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.100975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071939Jy sigma=0.000668 ! Fit after self-cal, rms=0.071914Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071914Jy sigma=0.000668 ! Fit after self-cal, rms=0.072290Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=5.049 mas, bpa=-11.95 degrees ! Estimated noise=598.945 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242057 Jy ! Component: 100 - total flux cleaned = -0.000267898 Jy ! Component: 150 - total flux cleaned = -0.0002573 Jy ! Component: 200 - total flux cleaned = -0.000257325 Jy ! Total flux subtracted in 200 components = -0.000257325 Jy ! Clean residual min=-0.001583 max=0.001719 Jy/beam ! Clean residual mean=-0.000014 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.100718 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.100718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072284Jy sigma=0.000666 ! Fit after self-cal, rms=0.072302Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.40256e-05 Jy ! Component: 100 - total flux cleaned = -2.87059e-06 Jy ! Component: 150 - total flux cleaned = -2.96764e-06 Jy ! Component: 200 - total flux cleaned = -2.46152e-06 Jy ! Total flux subtracted in 200 components = -2.46152e-06 Jy ! Clean residual min=-0.001601 max=0.001720 Jy/beam ! Clean residual mean=-0.000014 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.100716 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.100716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072299Jy sigma=0.000666 ! Fit after self-cal, rms=0.072299Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072299Jy sigma=0.000666 ! Fit after self-cal, rms=0.072260Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=5.055 mas, bpa=-12.14 degrees ! Estimated noise=598.205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227505 Jy ! Component: 100 - total flux cleaned = -0.000228842 Jy ! Component: 150 - total flux cleaned = -0.000219493 Jy ! Component: 200 - total flux cleaned = -0.000210609 Jy ! Total flux subtracted in 200 components = -0.000210609 Jy ! Clean residual min=-0.001568 max=0.001709 Jy/beam ! Clean residual mean=-0.000014 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.100505 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.100505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072256Jy sigma=0.000666 ! Fit after self-cal, rms=0.072257Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.42075e-05 Jy ! Component: 100 - total flux cleaned = -5.13184e-06 Jy ! Component: 150 - total flux cleaned = -4.79377e-06 Jy ! Component: 200 - total flux cleaned = 3.38298e-06 Jy ! Total flux subtracted in 200 components = 3.38298e-06 Jy ! Clean residual min=-0.001566 max=0.001707 Jy/beam ! Clean residual mean=-0.000014 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.100508 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.100508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072255Jy sigma=0.000666 ! Fit after self-cal, rms=0.072255Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072255Jy sigma=0.000666 ! Fit after self-cal, rms=0.072190Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.062 mas, bmaj=8.684 mas, bpa=-2.59 degrees ! Estimated noise=750.661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000437921 Jy ! Component: 100 - total flux cleaned = 0.000436644 Jy ! Component: 150 - total flux cleaned = 0.00043633 Jy ! Component: 200 - total flux cleaned = 0.000436445 Jy ! Total flux subtracted in 200 components = 0.000436445 Jy ! Clean residual min=-0.001796 max=0.001756 Jy/beam ! Clean residual mean=-0.000032 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.100945 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.100945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072193Jy sigma=0.000666 ! Fit after self-cal, rms=0.072193Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.84351e-05 Jy ! Component: 100 - total flux cleaned = 4.94013e-05 Jy ! Component: 150 - total flux cleaned = 4.96994e-05 Jy ! Component: 200 - total flux cleaned = 6.22513e-05 Jy ! Total flux subtracted in 200 components = 6.22513e-05 Jy ! Clean residual min=-0.001783 max=0.001774 Jy/beam ! Clean residual mean=-0.000032 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.101007 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 57 components and 0.101007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072196Jy sigma=0.000666 ! Fit after self-cal, rms=0.072197Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.724 mas, bmaj=5.06 mas, bpa=-12.29 degrees ! Estimated noise=597.534 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.724 x 5.06 at -12.29 degrees (North through East) ! Clean map min=-0.0015021 max=0.095793 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=4.299 mas, bpa=-19.06 degrees ! Estimated noise=913.161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0746234 Jy ! Component: 100 - total flux cleaned = 0.0910857 Jy ! Component: 150 - total flux cleaned = 0.0956304 Jy ! Component: 200 - total flux cleaned = 0.0976764 Jy ! Total flux subtracted in 200 components = 0.0976764 Jy ! Clean residual min=-0.002442 max=0.002710 Jy/beam ! Clean residual mean=-0.000006 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.0976764 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0976764 Jy ! Inverting map and beam ! Estimated beam: bmin=3.724 mas, bmaj=5.06 mas, bpa=-12.29 degrees ! Estimated noise=597.534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199042 Jy ! Component: 100 - total flux cleaned = 0.00317131 Jy ! Component: 150 - total flux cleaned = 0.00350697 Jy ! Component: 200 - total flux cleaned = 0.00350593 Jy ! Total flux subtracted in 200 components = 0.00350593 Jy ! Clean residual min=-0.001585 max=0.001589 Jy/beam ! Clean residual mean=-0.000014 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.101182 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 33 components and 0.101182 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.062 mas, bmaj=8.684 mas, bpa=-2.59 degrees ! Estimated noise=750.661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175435 Jy ! Component: 100 - total flux cleaned = 0.000146611 Jy ! Component: 150 - total flux cleaned = 0.000104209 Jy ! Component: 200 - total flux cleaned = 7.80273e-05 Jy ! Total flux subtracted in 200 components = 7.80273e-05 Jy ! Clean residual min=-0.001804 max=0.001778 Jy/beam ! Clean residual mean=-0.000032 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.10126 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.23272e-05 Jy ! Component: 100 - total flux cleaned = -4.11333e-05 Jy ! Component: 150 - total flux cleaned = -5.7619e-05 Jy ! Component: 200 - total flux cleaned = -6.80079e-05 Jy ! Total flux subtracted in 200 components = -6.80079e-05 Jy ! Clean residual min=-0.001799 max=0.001785 Jy/beam ! Clean residual mean=-0.000032 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.101192 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 56 components and 0.101192 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.724 mas, bmaj=5.06 mas, bpa=-12.29 degrees ! Estimated noise=597.534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.00872e-05 Jy ! Component: 100 - total flux cleaned = -3.98949e-05 Jy ! Component: 150 - total flux cleaned = -2.13067e-05 Jy ! Component: 200 - total flux cleaned = -3.90855e-06 Jy ! Total flux subtracted in 200 components = -3.90855e-06 Jy ! Clean residual min=-0.001579 max=0.001619 Jy/beam ! Clean residual mean=-0.000014 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.101188 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 67 components and 0.101188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072164Jy sigma=0.000665 ! Fit after self-cal, rms=0.072157Jy sigma=0.000665 wmodel J1819+5511_S_2017_08_05_pus_map.mod ! Writing 67 model components to file: J1819+5511_S_2017_08_05_pus_map.mod wobs J1819+5511_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1819+5511_S_2017_08_05_pus_uvs.fits wwins J1819+5511_S_2017_08_05_pus_map.win ! wwins: Wrote 2 windows to J1819+5511_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329566 Jy ! Component: 100 - total flux cleaned = 0.000384469 Jy ! Component: 150 - total flux cleaned = 0.000436479 Jy ! Component: 200 - total flux cleaned = 0.000461327 Jy ! Component: 250 - total flux cleaned = 0.000534971 Jy ! Component: 300 - total flux cleaned = 0.000607318 Jy ! Component: 350 - total flux cleaned = 0.000678302 Jy ! Component: 400 - total flux cleaned = 0.000747143 Jy ! Component: 450 - total flux cleaned = 0.00081437 Jy ! Component: 500 - total flux cleaned = 0.000967822 Jy ! Component: 550 - total flux cleaned = 0.00103213 Jy ! Component: 600 - total flux cleaned = 0.00113739 Jy ! Component: 650 - total flux cleaned = 0.00122011 Jy ! Component: 700 - total flux cleaned = 0.00124037 Jy ! Component: 750 - total flux cleaned = 0.00130069 Jy ! Component: 800 - total flux cleaned = 0.00139952 Jy ! Component: 850 - total flux cleaned = 0.00151604 Jy ! Component: 900 - total flux cleaned = 0.00151608 Jy ! Component: 950 - total flux cleaned = 0.00155435 Jy ! Component: 1000 - total flux cleaned = 0.00166622 Jy ! Component: 1050 - total flux cleaned = 0.00172165 Jy ! Component: 1100 - total flux cleaned = 0.00177591 Jy ! Component: 1150 - total flux cleaned = 0.00181194 Jy ! Component: 1200 - total flux cleaned = 0.00191802 Jy ! Component: 1250 - total flux cleaned = 0.00195291 Jy ! Component: 1300 - total flux cleaned = 0.00198757 Jy ! Component: 1350 - total flux cleaned = 0.00212418 Jy ! Component: 1400 - total flux cleaned = 0.00215783 Jy ! Component: 1450 - total flux cleaned = 0.00222472 Jy ! Component: 1500 - total flux cleaned = 0.00225743 Jy ! Component: 1550 - total flux cleaned = 0.00232293 Jy ! Component: 1600 - total flux cleaned = 0.00235525 Jy ! Component: 1650 - total flux cleaned = 0.00237121 Jy ! Component: 1700 - total flux cleaned = 0.00240326 Jy ! Component: 1750 - total flux cleaned = 0.00245055 Jy ! Component: 1800 - total flux cleaned = 0.0025283 Jy ! Component: 1850 - total flux cleaned = 0.00248211 Jy ! Component: 1900 - total flux cleaned = 0.00260441 Jy ! Component: 1950 - total flux cleaned = 0.00260435 Jy ! Component: 2000 - total flux cleaned = 0.00258942 Jy ! Component: 2050 - total flux cleaned = 0.00264901 Jy ! Component: 2100 - total flux cleaned = 0.00263434 Jy ! Component: 2150 - total flux cleaned = 0.00269287 Jy ! Component: 2200 - total flux cleaned = 0.00270726 Jy ! Component: 2250 - total flux cleaned = 0.00270731 Jy ! Component: 2300 - total flux cleaned = 0.00272152 Jy ! Component: 2350 - total flux cleaned = 0.00276399 Jy ! Component: 2400 - total flux cleaned = 0.0027361 Jy ! Component: 2450 - total flux cleaned = 0.00279156 Jy ! Component: 2500 - total flux cleaned = 0.00276402 Jy ! Component: 2550 - total flux cleaned = 0.00269575 Jy ! Component: 2600 - total flux cleaned = 0.00273649 Jy ! Component: 2650 - total flux cleaned = 0.00270953 Jy ! Component: 2700 - total flux cleaned = 0.00270963 Jy ! Component: 2750 - total flux cleaned = 0.00270973 Jy ! Component: 2800 - total flux cleaned = 0.00267033 Jy ! Component: 2850 - total flux cleaned = 0.00274859 Jy ! Component: 2900 - total flux cleaned = 0.00274857 Jy ! Component: 2950 - total flux cleaned = 0.00267137 Jy ! Component: 3000 - total flux cleaned = 0.00268424 Jy ! Component: 3050 - total flux cleaned = 0.00274778 Jy ! Component: 3100 - total flux cleaned = 0.00268471 Jy ! Component: 3150 - total flux cleaned = 0.00269714 Jy ! Component: 3200 - total flux cleaned = 0.00272195 Jy ! Component: 3250 - total flux cleaned = 0.00272204 Jy ! Component: 3300 - total flux cleaned = 0.00269737 Jy ! Component: 3350 - total flux cleaned = 0.0026975 Jy ! Component: 3400 - total flux cleaned = 0.00270963 Jy ! Component: 3450 - total flux cleaned = 0.00268573 Jy ! Component: 3500 - total flux cleaned = 0.0027098 Jy ! Component: 3550 - total flux cleaned = 0.00267419 Jy ! Component: 3600 - total flux cleaned = 0.00268601 Jy ! Component: 3650 - total flux cleaned = 0.00267426 Jy ! Component: 3700 - total flux cleaned = 0.00266258 Jy ! Component: 3750 - total flux cleaned = 0.00262803 Jy ! Component: 3800 - total flux cleaned = 0.002651 Jy ! Component: 3850 - total flux cleaned = 0.00263944 Jy ! Component: 3900 - total flux cleaned = 0.00263935 Jy ! Component: 3950 - total flux cleaned = 0.00260542 Jy ! Component: 4000 - total flux cleaned = 0.00261666 Jy ! Component: 4050 - total flux cleaned = 0.00260548 Jy ! Total flux subtracted in 4096 components = 0.00259442 Jy ! Clean residual min=-0.000687 max=0.000754 Jy/beam ! Clean residual mean=-0.000005 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.103783 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 365 components and 0.103783 Jy ![Exited script file: muppet] wmap "J1819+5511_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.724 x 5.06 at -12.29 degrees (North through East) ! Clean map min=-0.0010925 max=0.096094 Jy/beam ! Writing clean map to FITS file: J1819+5511_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.096094 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000203891 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.636537 0.636537 1.27307 2.54615 5.0923 10.1846 20.3692 40.7384 81.4768 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.096 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.724 x 5.06 at -12.29 degrees (North through East) ! Clean map min=-0.0010925 max=0.096094 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1819+5511_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:35:07 2019