! Started logfile: J1819+3845_S_2017_03_23_pus_uvs.log on Mon May 13 10:06:46 2019 obs J1819+3845_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1819+3845_S_2017_03_23_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.844643 visibilities/baseline/integration-bin. ! Found source: J1819+3845 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 17028 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1819+3845_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 404 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.898669Jy sigma=0.008173 ! Fit after self-cal, rms=0.888243Jy sigma=0.008104 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=4.94 mas, bpa=-3.157 degrees ! Estimated noise=1151.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0891898 Jy ! Component: 100 - total flux cleaned = 0.109587 Jy ! Total flux subtracted in 100 components = 0.109587 Jy ! Clean residual min=-0.006023 max=0.007127 Jy/beam ! Clean residual mean=0.000008 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 0.109587 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.109587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098127Jy sigma=0.000744 ! Fit after self-cal, rms=0.098117Jy sigma=0.000744 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.663 mas, bmaj=5.941 mas, bpa=-0.8543 degrees ! Estimated noise=657.852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.008359 Jy ! Component: 100 - total flux cleaned = 0.0123435 Jy ! Component: 150 - total flux cleaned = 0.0145822 Jy ! Component: 200 - total flux cleaned = 0.0159511 Jy ! Total flux subtracted in 200 components = 0.0159511 Jy ! Clean residual min=-0.004580 max=0.004683 Jy/beam ! Clean residual mean=0.000008 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.125538 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 35 components and 0.125538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097421Jy sigma=0.000737 ! Fit after self-cal, rms=0.097427Jy sigma=0.000737 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 0.94 KP 1.02 ! LA 0.98 MK 1.05 NL 0.90 OV 1.02 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.01 HN 1.00 KP 0.99 ! LA 0.96 MK 1.06 NL 1.02 OV 1.05 ! PT 0.97 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.03 HN 0.98 KP 0.84 ! LA 0.75 MK 1.07 NL 1.13 OV 0.97 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.04 HN 0.97 KP 1.00* ! LA 0.82 MK 1.20 NL 1.00* OV 1.89 ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.097427Jy sigma=0.000737 ! Fit after self-cal, rms=0.137566Jy sigma=0.000721 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.709 mas, bmaj=6.029 mas, bpa=-0.6478 degrees ! Estimated noise=662.236 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141215 Jy ! Component: 100 - total flux cleaned = -0.00161286 Jy ! Component: 150 - total flux cleaned = -0.00174501 Jy ! Component: 200 - total flux cleaned = -0.00177493 Jy ! Total flux subtracted in 200 components = -0.00177493 Jy ! Clean residual min=-0.003291 max=0.002889 Jy/beam ! Clean residual mean=-0.000000 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.123763 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.123763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137524Jy sigma=0.000720 ! Fit after self-cal, rms=0.137685Jy sigma=0.000720 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137685Jy sigma=0.000720 ! Fit after self-cal, rms=0.161946Jy sigma=0.000709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.702 mas, bmaj=6.037 mas, bpa=-0.9274 degrees ! Estimated noise=666.303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000748839 Jy ! Component: 100 - total flux cleaned = 0.000708011 Jy ! Component: 150 - total flux cleaned = 0.000710058 Jy ! Component: 200 - total flux cleaned = 0.000658068 Jy ! Total flux subtracted in 200 components = 0.000658068 Jy ! Clean residual min=-0.002063 max=0.002671 Jy/beam ! Clean residual mean=0.000022 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.124421 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.124421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161810Jy sigma=0.000709 ! Fit after self-cal, rms=0.165956Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000660461 Jy ! Component: 100 - total flux cleaned = -0.000840396 Jy ! Component: 150 - total flux cleaned = -0.000902205 Jy ! Component: 200 - total flux cleaned = -0.000944835 Jy ! Total flux subtracted in 200 components = -0.000944835 Jy ! Clean residual min=-0.002165 max=0.002320 Jy/beam ! Clean residual mean=0.000015 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.123477 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.123477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165954Jy sigma=0.000705 ! Fit after self-cal, rms=0.165986Jy sigma=0.000705 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165986Jy sigma=0.000705 ! Fit after self-cal, rms=0.218717Jy sigma=0.000704 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=6.034 mas, bpa=-1.292 degrees ! Estimated noise=670.376 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000519183 Jy ! Component: 100 - total flux cleaned = 0.000496436 Jy ! Component: 150 - total flux cleaned = 0.000479681 Jy ! Component: 200 - total flux cleaned = 0.000448121 Jy ! Total flux subtracted in 200 components = 0.000448121 Jy ! Clean residual min=-0.002098 max=0.002358 Jy/beam ! Clean residual mean=0.000016 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.123925 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.123925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218673Jy sigma=0.000704 ! Fit after self-cal, rms=0.219701Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-44, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114808 Jy ! Component: 100 - total flux cleaned = 0.000969367 Jy ! Component: 150 - total flux cleaned = 0.000963118 Jy ! Component: 200 - total flux cleaned = 0.00102017 Jy ! Total flux subtracted in 200 components = 0.00102017 Jy ! Clean residual min=-0.001886 max=0.002138 Jy/beam ! Clean residual mean=0.000014 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.124945 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 75 components and 0.124945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219681Jy sigma=0.000704 ! Fit after self-cal, rms=0.219682Jy sigma=0.000704 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219682Jy sigma=0.000704 ! Fit after self-cal, rms=0.243063Jy sigma=0.000704 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.575 mas, bmaj=9.651 mas, bpa=1.313 degrees ! Estimated noise=805.025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000772508 Jy ! Component: 100 - total flux cleaned = 0.00103233 Jy ! Component: 150 - total flux cleaned = 0.00111323 Jy ! Component: 200 - total flux cleaned = 0.0011858 Jy ! Total flux subtracted in 200 components = 0.0011858 Jy ! Clean residual min=-0.002299 max=0.002371 Jy/beam ! Clean residual mean=0.000034 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.126131 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 0.126131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243036Jy sigma=0.000704 ! Fit after self-cal, rms=0.243286Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.90498e-05 Jy ! Component: 100 - total flux cleaned = 4.11588e-05 Jy ! Component: 150 - total flux cleaned = 4.10008e-05 Jy ! Component: 200 - total flux cleaned = 4.08249e-05 Jy ! Total flux subtracted in 200 components = 4.08249e-05 Jy ! Clean residual min=-0.002318 max=0.002372 Jy/beam ! Clean residual mean=0.000033 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.126171 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 92 components and 0.126171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243279Jy sigma=0.000704 ! Fit after self-cal, rms=0.243273Jy sigma=0.000704 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=6.029 mas, bpa=-1.478 degrees ! Estimated noise=672.942 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.7 x 6.029 at -1.478 degrees (North through East) ! Clean map min=-0.0018403 max=0.11839 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=4.968 mas, bpa=-4.521 degrees ! Estimated noise=1190.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0914412 Jy ! Component: 100 - total flux cleaned = 0.112119 Jy ! Component: 150 - total flux cleaned = 0.119136 Jy ! Component: 200 - total flux cleaned = 0.123174 Jy ! Total flux subtracted in 200 components = 0.123174 Jy ! Clean residual min=-0.003986 max=0.003464 Jy/beam ! Clean residual mean=0.000005 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.123174 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.123174 Jy ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=6.029 mas, bpa=-1.478 degrees ! Estimated noise=672.942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162519 Jy ! Component: 100 - total flux cleaned = 0.00196116 Jy ! Component: 150 - total flux cleaned = 0.00219056 Jy ! Component: 200 - total flux cleaned = 0.0023063 Jy ! Total flux subtracted in 200 components = 0.0023063 Jy ! Clean residual min=-0.001923 max=0.002166 Jy/beam ! Clean residual mean=0.000014 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.125481 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 35 components and 0.125481 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.575 mas, bmaj=9.651 mas, bpa=1.313 degrees ! Estimated noise=805.025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000556242 Jy ! Component: 100 - total flux cleaned = 0.000660917 Jy ! Component: 150 - total flux cleaned = 0.000696266 Jy ! Component: 200 - total flux cleaned = 0.000728988 Jy ! Total flux subtracted in 200 components = 0.000728988 Jy ! Clean residual min=-0.002312 max=0.002402 Jy/beam ! Clean residual mean=0.000032 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.12621 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.54909e-05 Jy ! Component: 100 - total flux cleaned = 2.97856e-05 Jy ! Component: 150 - total flux cleaned = 2.95504e-05 Jy ! Component: 200 - total flux cleaned = 1.7393e-05 Jy ! Total flux subtracted in 200 components = 1.7393e-05 Jy ! Clean residual min=-0.002310 max=0.002397 Jy/beam ! Clean residual mean=0.000033 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.126227 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 60 components and 0.126227 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=6.029 mas, bpa=-1.478 degrees ! Estimated noise=672.942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.88851e-05 Jy ! Component: 100 - total flux cleaned = -0.000131205 Jy ! Component: 150 - total flux cleaned = -0.000183311 Jy ! Component: 200 - total flux cleaned = -0.000231695 Jy ! Total flux subtracted in 200 components = -0.000231695 Jy ! Clean residual min=-0.001832 max=0.002178 Jy/beam ! Clean residual mean=0.000015 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.125995 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 73 components and 0.125995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243272Jy sigma=0.000704 ! Fit after self-cal, rms=0.243282Jy sigma=0.000704 wmodel J1819+3845_S_2017_03_23_pus_map.mod ! Writing 73 model components to file: J1819+3845_S_2017_03_23_pus_map.mod wobs J1819+3845_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1819+3845_S_2017_03_23_pus_uvs.fits wwins J1819+3845_S_2017_03_23_pus_map.win ! wwins: Wrote 2 windows to J1819+3845_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000819404 Jy ! Component: 100 - total flux cleaned = 0.00120304 Jy ! Component: 150 - total flux cleaned = 0.0016 Jy ! Component: 200 - total flux cleaned = 0.00198079 Jy ! Component: 250 - total flux cleaned = 0.00228813 Jy ! Component: 300 - total flux cleaned = 0.00261701 Jy ! Component: 350 - total flux cleaned = 0.00290979 Jy ! Component: 400 - total flux cleaned = 0.00322549 Jy ! Component: 450 - total flux cleaned = 0.00347833 Jy ! Component: 500 - total flux cleaned = 0.00378113 Jy ! Component: 550 - total flux cleaned = 0.00405089 Jy ! Component: 600 - total flux cleaned = 0.00428964 Jy ! Component: 650 - total flux cleaned = 0.00449847 Jy ! Component: 700 - total flux cleaned = 0.00467812 Jy ! Component: 750 - total flux cleaned = 0.00483013 Jy ! Component: 800 - total flux cleaned = 0.00503033 Jy ! Component: 850 - total flux cleaned = 0.00522734 Jy ! Component: 900 - total flux cleaned = 0.00547066 Jy ! Component: 950 - total flux cleaned = 0.00561432 Jy ! Component: 1000 - total flux cleaned = 0.00578046 Jy ! Component: 1050 - total flux cleaned = 0.00592099 Jy ! Component: 1100 - total flux cleaned = 0.00612972 Jy ! Component: 1150 - total flux cleaned = 0.00633618 Jy ! Component: 1200 - total flux cleaned = 0.00660843 Jy ! Component: 1250 - total flux cleaned = 0.00685542 Jy ! Component: 1300 - total flux cleaned = 0.00709979 Jy ! Component: 1350 - total flux cleaned = 0.00732014 Jy ! Component: 1400 - total flux cleaned = 0.00758155 Jy ! Component: 1450 - total flux cleaned = 0.00788356 Jy ! Component: 1500 - total flux cleaned = 0.00811837 Jy ! Component: 1550 - total flux cleaned = 0.0083936 Jy ! Component: 1600 - total flux cleaned = 0.00868758 Jy ! Component: 1650 - total flux cleaned = 0.00897882 Jy ! Component: 1700 - total flux cleaned = 0.00918485 Jy ! Component: 1750 - total flux cleaned = 0.00951219 Jy ! Component: 1800 - total flux cleaned = 0.00981632 Jy ! Component: 1850 - total flux cleaned = 0.0101182 Jy ! Component: 1900 - total flux cleaned = 0.0104174 Jy ! Component: 1950 - total flux cleaned = 0.0106351 Jy ! Component: 2000 - total flux cleaned = 0.0108907 Jy ! Component: 2050 - total flux cleaned = 0.0111053 Jy ! Component: 2100 - total flux cleaned = 0.0114149 Jy ! Component: 2150 - total flux cleaned = 0.0116645 Jy ! Component: 2200 - total flux cleaned = 0.0119886 Jy ! Component: 2250 - total flux cleaned = 0.0122346 Jy ! Component: 2300 - total flux cleaned = 0.0124602 Jy ! Component: 2350 - total flux cleaned = 0.0126654 Jy ! Component: 2400 - total flux cleaned = 0.0129247 Jy ! Component: 2450 - total flux cleaned = 0.0131818 Jy ! Component: 2500 - total flux cleaned = 0.0133827 Jy ! Component: 2550 - total flux cleaned = 0.0136364 Jy ! Component: 2600 - total flux cleaned = 0.0138706 Jy ! Component: 2650 - total flux cleaned = 0.0140318 Jy ! Component: 2700 - total flux cleaned = 0.0142633 Jy ! Component: 2750 - total flux cleaned = 0.0144757 Jy ! Component: 2800 - total flux cleaned = 0.0146514 Jy ! Component: 2850 - total flux cleaned = 0.0149135 Jy ! Component: 2900 - total flux cleaned = 0.0150526 Jy ! Component: 2950 - total flux cleaned = 0.0152597 Jy ! Component: 3000 - total flux cleaned = 0.0154658 Jy ! Component: 3050 - total flux cleaned = 0.0157048 Jy ! Component: 3100 - total flux cleaned = 0.0158917 Jy ! Component: 3150 - total flux cleaned = 0.0160603 Jy ! Component: 3200 - total flux cleaned = 0.0162449 Jy ! Component: 3250 - total flux cleaned = 0.0163953 Jy ! Component: 3300 - total flux cleaned = 0.0165944 Jy ! Component: 3350 - total flux cleaned = 0.0167594 Jy ! Component: 3400 - total flux cleaned = 0.0169236 Jy ! Component: 3450 - total flux cleaned = 0.0170868 Jy ! Component: 3500 - total flux cleaned = 0.0172004 Jy ! Component: 3550 - total flux cleaned = 0.0173458 Jy ! Component: 3600 - total flux cleaned = 0.0174584 Jy ! Component: 3650 - total flux cleaned = 0.0175703 Jy ! Component: 3700 - total flux cleaned = 0.0177137 Jy ! Component: 3750 - total flux cleaned = 0.017872 Jy ! Component: 3800 - total flux cleaned = 0.0179825 Jy ! Component: 3850 - total flux cleaned = 0.018061 Jy ! Component: 3900 - total flux cleaned = 0.0181548 Jy ! Component: 3950 - total flux cleaned = 0.0182948 Jy ! Component: 4000 - total flux cleaned = 0.0183877 Jy ! Component: 4050 - total flux cleaned = 0.0184649 Jy ! Total flux subtracted in 4096 components = 0.0186031 Jy ! Clean residual min=-0.000940 max=0.000871 Jy/beam ! Clean residual mean=0.000012 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.144598 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 399 components and 0.144598 Jy ![Exited script file: muppet] wmap "J1819+3845_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.7 x 6.029 at -1.478 degrees (North through East) ! Clean map min=-0.0015943 max=0.11882 Jy/beam ! Writing clean map to FITS file: J1819+3845_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118817 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000285573 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.721038 0.721038 1.44208 2.88415 5.7683 11.5366 23.0732 46.1464 92.2929 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.7 x 6.029 at -1.478 degrees (North through East) ! Clean map min=-0.0015943 max=0.11882 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1819+3845_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:06:52 2019