! Started logfile: J1819+1543_S_2017_05_27_pus_uvs.log on Fri May 3 11:12:31 2019 obs J1819+1543_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1819+1543_S_2017_05_27_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.849691 visibilities/baseline/integration-bin. ! Found source: J1819+1543 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 22024 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1819+1543_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 844 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.978169Jy sigma=0.009624 ! Fit after self-cal, rms=0.949930Jy sigma=0.009408 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=6.609 mas, bpa=-8.311 degrees ! Estimated noise=874.938 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0381158 Jy ! Component: 100 - total flux cleaned = 0.0477043 Jy ! Total flux subtracted in 100 components = 0.0477043 Jy ! Clean residual min=-0.003550 max=0.004653 Jy/beam ! Clean residual mean=-0.000011 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.0477043 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0477043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092803Jy sigma=0.000688 ! Fit after self-cal, rms=0.092648Jy sigma=0.000686 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.474 mas, bmaj=7.236 mas, bpa=-5.757 degrees ! Estimated noise=581.632 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00743793 Jy ! Component: 100 - total flux cleaned = 0.0118304 Jy ! Component: 150 - total flux cleaned = 0.0146144 Jy ! Component: 200 - total flux cleaned = 0.0164631 Jy ! Total flux subtracted in 200 components = 0.0164631 Jy ! Clean residual min=-0.002821 max=0.002562 Jy/beam ! Clean residual mean=-0.000021 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0641674 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 39 components and 0.0641674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091799Jy sigma=0.000683 ! Fit after self-cal, rms=0.091751Jy sigma=0.000682 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.90 HN 1.16 KP 0.97 ! LA 0.91 MK 1.12 NL 0.93 OV 1.06 ! PT 1.05 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.93 HN 1.07 KP 1.00 ! LA 0.91 MK 1.05 NL 1.05 OV 1.07 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 2.50 FD 0.93 HN 1.01 KP 1.02 ! LA 0.96 MK 1.01 NL 1.09 OV 0.90 ! PT 1.10 SC 1.03 ! ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.85 KP 1.00* ! LA 0.90 MK 0.83 NL 1.00* OV 1.00* ! PT 0.90 SC 1.00* ! ! ! Fit before self-cal, rms=0.091751Jy sigma=0.000682 ! Fit after self-cal, rms=0.099549Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.479 mas, bmaj=7.336 mas, bpa=-5.72 degrees ! Estimated noise=597.062 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128557 Jy ! Component: 100 - total flux cleaned = 0.00135446 Jy ! Component: 150 - total flux cleaned = 0.00135151 Jy ! Component: 200 - total flux cleaned = 0.00135059 Jy ! Total flux subtracted in 200 components = 0.00135059 Jy ! Clean residual min=-0.002062 max=0.002242 Jy/beam ! Clean residual mean=-0.000009 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.065518 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 58 components and 0.065518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099323Jy sigma=0.000667 ! Fit after self-cal, rms=0.099569Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099569Jy sigma=0.000666 ! Fit after self-cal, rms=0.103501Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=7.313 mas, bpa=-5.84 degrees ! Estimated noise=603.149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106152 Jy ! Component: 100 - total flux cleaned = 0.00124608 Jy ! Component: 150 - total flux cleaned = 0.00128302 Jy ! Component: 200 - total flux cleaned = 0.00131652 Jy ! Total flux subtracted in 200 components = 0.00131652 Jy ! Clean residual min=-0.001746 max=0.002045 Jy/beam ! Clean residual mean=-0.000004 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0668345 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 76 components and 0.0668345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103400Jy sigma=0.000662 ! Fit after self-cal, rms=0.103392Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340021 Jy ! Component: 100 - total flux cleaned = 0.000372323 Jy ! Component: 150 - total flux cleaned = 0.0003971 Jy ! Component: 200 - total flux cleaned = 0.000395853 Jy ! Total flux subtracted in 200 components = 0.000395853 Jy ! Clean residual min=-0.001749 max=0.002099 Jy/beam ! Clean residual mean=-0.000002 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0672304 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 76 components and 0.0672304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103337Jy sigma=0.000662 ! Fit after self-cal, rms=0.103334Jy sigma=0.000662 ! Inverting map ! Added new window around map position (105, -68.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020542 Jy ! Component: 100 - total flux cleaned = 0.00283844 Jy ! Component: 150 - total flux cleaned = 0.00349508 Jy ! Component: 200 - total flux cleaned = 0.00401537 Jy ! Total flux subtracted in 200 components = 0.00401537 Jy ! Clean residual min=-0.001674 max=0.001771 Jy/beam ! Clean residual mean=-0.000002 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0712457 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 93 components and 0.0712457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103256Jy sigma=0.000661 ! Fit after self-cal, rms=0.103233Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103233Jy sigma=0.000661 ! Fit after self-cal, rms=0.104843Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=7.309 mas, bpa=-5.921 degrees ! Estimated noise=604.483 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000768654 Jy ! Component: 100 - total flux cleaned = 0.00138258 Jy ! Component: 150 - total flux cleaned = 0.00182009 Jy ! Component: 200 - total flux cleaned = 0.00209256 Jy ! Total flux subtracted in 200 components = 0.00209256 Jy ! Clean residual min=-0.001641 max=0.001731 Jy/beam ! Clean residual mean=-0.000004 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0733383 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 105 components and 0.0733383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104784Jy sigma=0.000661 ! Fit after self-cal, rms=0.104776Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00043043 Jy ! Component: 100 - total flux cleaned = 0.000665579 Jy ! Component: 150 - total flux cleaned = 0.000905802 Jy ! Component: 200 - total flux cleaned = 0.00102864 Jy ! Total flux subtracted in 200 components = 0.00102864 Jy ! Clean residual min=-0.001625 max=0.001738 Jy/beam ! Clean residual mean=-0.000003 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0743669 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 112 components and 0.0743669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104733Jy sigma=0.000660 ! Fit after self-cal, rms=0.104727Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104727Jy sigma=0.000660 ! Fit after self-cal, rms=0.106443Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.692 mas, bmaj=10.76 mas, bpa=-4.664 degrees ! Estimated noise=730.424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119165 Jy ! Component: 100 - total flux cleaned = 0.0016961 Jy ! Component: 150 - total flux cleaned = 0.00202214 Jy ! Component: 200 - total flux cleaned = 0.00216162 Jy ! Total flux subtracted in 200 components = 0.00216162 Jy ! Clean residual min=-0.001932 max=0.002077 Jy/beam ! Clean residual mean=-0.000007 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0765285 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 126 components and 0.0765285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106412Jy sigma=0.000660 ! Fit after self-cal, rms=0.106410Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526196 Jy ! Component: 100 - total flux cleaned = 0.000619876 Jy ! Component: 150 - total flux cleaned = 0.000680257 Jy ! Component: 200 - total flux cleaned = 0.000734323 Jy ! Total flux subtracted in 200 components = 0.000734323 Jy ! Clean residual min=-0.001933 max=0.001995 Jy/beam ! Clean residual mean=-0.000006 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0772629 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 131 components and 0.0772629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106392Jy sigma=0.000660 ! Fit after self-cal, rms=0.106388Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=7.312 mas, bpa=-6.011 degrees ! Estimated noise=607.079 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.484 x 7.312 at -6.011 degrees (North through East) ! Clean map min=-0.0027489 max=0.05247 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=6.693 mas, bpa=-9.034 degrees ! Estimated noise=920.979 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0393417 Jy ! Component: 100 - total flux cleaned = 0.0507938 Jy ! Component: 150 - total flux cleaned = 0.0579083 Jy ! Component: 200 - total flux cleaned = 0.0621703 Jy ! Total flux subtracted in 200 components = 0.0621703 Jy ! Clean residual min=-0.002771 max=0.002876 Jy/beam ! Clean residual mean=-0.000004 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.0621703 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0621703 Jy ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=7.312 mas, bpa=-6.011 degrees ! Estimated noise=607.079 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00407809 Jy ! Component: 100 - total flux cleaned = 0.00537369 Jy ! Component: 150 - total flux cleaned = 0.00669195 Jy ! Component: 200 - total flux cleaned = 0.00775289 Jy ! Total flux subtracted in 200 components = 0.00775289 Jy ! Clean residual min=-0.001940 max=0.002213 Jy/beam ! Clean residual mean=-0.000006 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0699232 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 52 components and 0.0699232 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.692 mas, bmaj=10.76 mas, bpa=-4.664 degrees ! Estimated noise=730.424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279867 Jy ! Component: 100 - total flux cleaned = 0.00397161 Jy ! Component: 150 - total flux cleaned = 0.00472877 Jy ! Component: 200 - total flux cleaned = 0.00525725 Jy ! Total flux subtracted in 200 components = 0.00525725 Jy ! Clean residual min=-0.002108 max=0.002390 Jy/beam ! Clean residual mean=-0.000008 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0751805 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410024 Jy ! Component: 100 - total flux cleaned = 0.000635833 Jy ! Component: 150 - total flux cleaned = 0.00083863 Jy ! Component: 200 - total flux cleaned = 0.000985059 Jy ! Total flux subtracted in 200 components = 0.000985059 Jy ! Clean residual min=-0.002015 max=0.002216 Jy/beam ! Clean residual mean=-0.000006 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0761655 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 116 components and 0.0761656 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=7.312 mas, bpa=-6.011 degrees ! Estimated noise=607.079 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000459537 Jy ! Component: 100 - total flux cleaned = -0.000365257 Jy ! Component: 150 - total flux cleaned = -0.000153121 Jy ! Component: 200 - total flux cleaned = 3.41403e-05 Jy ! Total flux subtracted in 200 components = 3.41403e-05 Jy ! Clean residual min=-0.001636 max=0.001840 Jy/beam ! Clean residual mean=-0.000004 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0761997 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 127 components and 0.0761997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106450Jy sigma=0.000661 ! Fit after self-cal, rms=0.106449Jy sigma=0.000660 wmodel J1819+1543_S_2017_05_27_pus_map.mod ! Writing 127 model components to file: J1819+1543_S_2017_05_27_pus_map.mod wobs J1819+1543_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1819+1543_S_2017_05_27_pus_uvs.fits wwins J1819+1543_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J1819+1543_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000718261 Jy ! Component: 100 - total flux cleaned = 0.000977928 Jy ! Component: 150 - total flux cleaned = 0.00122711 Jy ! Component: 200 - total flux cleaned = 0.00149414 Jy ! Component: 250 - total flux cleaned = 0.00172692 Jy ! Component: 300 - total flux cleaned = 0.00182751 Jy ! Component: 350 - total flux cleaned = 0.00197448 Jy ! Component: 400 - total flux cleaned = 0.00209405 Jy ! Component: 450 - total flux cleaned = 0.00225752 Jy ! Component: 500 - total flux cleaned = 0.00243995 Jy ! Component: 550 - total flux cleaned = 0.00250728 Jy ! Component: 600 - total flux cleaned = 0.00261825 Jy ! Component: 650 - total flux cleaned = 0.00279162 Jy ! Component: 700 - total flux cleaned = 0.00291891 Jy ! Component: 750 - total flux cleaned = 0.00293997 Jy ! Component: 800 - total flux cleaned = 0.00306345 Jy ! Component: 850 - total flux cleaned = 0.00316468 Jy ! Component: 900 - total flux cleaned = 0.00334333 Jy ! Component: 950 - total flux cleaned = 0.00338248 Jy ! Component: 1000 - total flux cleaned = 0.00355612 Jy ! Component: 1050 - total flux cleaned = 0.00357512 Jy ! Component: 1100 - total flux cleaned = 0.00370643 Jy ! Component: 1150 - total flux cleaned = 0.00376189 Jy ! Component: 1200 - total flux cleaned = 0.00389004 Jy ! Component: 1250 - total flux cleaned = 0.00396196 Jy ! Component: 1300 - total flux cleaned = 0.0040689 Jy ! Component: 1350 - total flux cleaned = 0.00417461 Jy ! Component: 1400 - total flux cleaned = 0.00420954 Jy ! Component: 1450 - total flux cleaned = 0.00438177 Jy ! Component: 1500 - total flux cleaned = 0.00441595 Jy ! Component: 1550 - total flux cleaned = 0.00446699 Jy ! Component: 1600 - total flux cleaned = 0.00453383 Jy ! Component: 1650 - total flux cleaned = 0.00463307 Jy ! Component: 1700 - total flux cleaned = 0.0047146 Jy ! Component: 1750 - total flux cleaned = 0.00466605 Jy ! Component: 1800 - total flux cleaned = 0.00481021 Jy ! Component: 1850 - total flux cleaned = 0.00484176 Jy ! Component: 1900 - total flux cleaned = 0.00487318 Jy ! Component: 1950 - total flux cleaned = 0.00493541 Jy ! Component: 2000 - total flux cleaned = 0.004997 Jy ! Component: 2050 - total flux cleaned = 0.00510377 Jy ! Component: 2100 - total flux cleaned = 0.00514921 Jy ! Component: 2150 - total flux cleaned = 0.00517929 Jy ! Component: 2200 - total flux cleaned = 0.00529815 Jy ! Component: 2250 - total flux cleaned = 0.00534229 Jy ! Component: 2300 - total flux cleaned = 0.00542974 Jy ! Component: 2350 - total flux cleaned = 0.00550196 Jy ! Component: 2400 - total flux cleaned = 0.00551624 Jy ! Component: 2450 - total flux cleaned = 0.0056158 Jy ! Component: 2500 - total flux cleaned = 0.00564391 Jy ! Component: 2550 - total flux cleaned = 0.00569979 Jy ! Component: 2600 - total flux cleaned = 0.00572758 Jy ! Component: 2650 - total flux cleaned = 0.00578278 Jy ! Component: 2700 - total flux cleaned = 0.00583736 Jy ! Component: 2750 - total flux cleaned = 0.00590492 Jy ! Component: 2800 - total flux cleaned = 0.00590502 Jy ! Component: 2850 - total flux cleaned = 0.00599854 Jy ! Component: 2900 - total flux cleaned = 0.00601167 Jy ! Component: 2950 - total flux cleaned = 0.00605123 Jy ! Component: 3000 - total flux cleaned = 0.00607733 Jy ! Component: 3050 - total flux cleaned = 0.00607729 Jy ! Component: 3100 - total flux cleaned = 0.00614176 Jy ! Component: 3150 - total flux cleaned = 0.00616738 Jy ! Component: 3200 - total flux cleaned = 0.00615474 Jy ! Component: 3250 - total flux cleaned = 0.00620528 Jy ! Component: 3300 - total flux cleaned = 0.00618012 Jy ! Component: 3350 - total flux cleaned = 0.00624243 Jy ! Component: 3400 - total flux cleaned = 0.00623017 Jy ! Component: 3450 - total flux cleaned = 0.00624255 Jy ! Component: 3500 - total flux cleaned = 0.00625485 Jy ! Component: 3550 - total flux cleaned = 0.0063035 Jy ! Component: 3600 - total flux cleaned = 0.00635182 Jy ! Component: 3650 - total flux cleaned = 0.00637581 Jy ! Component: 3700 - total flux cleaned = 0.00637578 Jy ! Component: 3750 - total flux cleaned = 0.0063876 Jy ! Component: 3800 - total flux cleaned = 0.00639938 Jy ! Component: 3850 - total flux cleaned = 0.0064111 Jy ! Component: 3900 - total flux cleaned = 0.00644605 Jy ! Component: 3950 - total flux cleaned = 0.00649242 Jy ! Component: 4000 - total flux cleaned = 0.00644617 Jy ! Component: 4050 - total flux cleaned = 0.00645762 Jy ! Total flux subtracted in 4096 components = 0.00645759 Jy ! Clean residual min=-0.000697 max=0.000615 Jy/beam ! Clean residual mean=0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.0826573 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 436 components and 0.0826572 Jy ![Exited script file: muppet] wmap "J1819+1543_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.484 x 7.312 at -6.011 degrees (North through East) ! Clean map min=-0.0025315 max=0.052186 Jy/beam ! Writing clean map to FITS file: J1819+1543_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0521859 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000216324 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.24358 1.24358 2.48716 4.97431 9.94862 19.8972 39.7945 79.589 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.484 x 7.312 at -6.011 degrees (North through East) ! Clean map min=-0.0025315 max=0.052186 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1819+1543_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:12:36 2019