! Started logfile: J1818-1108_S_2017_09_26_pus_uvs.log on Sat May 11 13:04:24 2019 obs J1818-1108_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1818-1108_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.823413 visibilities/baseline/integration-bin. ! Found source: J1818-1108 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 34860 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1818-1108_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 298 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 522 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 532 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1811 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.962933Jy sigma=0.007350 ! Fit after self-cal, rms=0.926300Jy sigma=0.007078 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.782 mas, bmaj=14.79 mas, bpa=-18.06 degrees ! Estimated noise=1514.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0529682 Jy ! Component: 100 - total flux cleaned = 0.07766 Jy ! Total flux subtracted in 100 components = 0.07766 Jy ! Clean residual min=-0.014120 max=0.020089 Jy/beam ! Clean residual mean=-0.000046 rms=0.007022 Jy/beam ! Combined flux in latest and established models = 0.07766 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.07766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167843Jy sigma=0.001251 ! Fit after self-cal, rms=0.167333Jy sigma=0.001248 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.118 mas, bmaj=18.87 mas, bpa=-15.62 degrees ! Estimated noise=619.072 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0417484 Jy ! Component: 100 - total flux cleaned = 0.0707323 Jy ! Component: 150 - total flux cleaned = 0.0917517 Jy ! Component: 200 - total flux cleaned = 0.107046 Jy ! Total flux subtracted in 200 components = 0.107046 Jy ! Clean residual min=-0.029437 max=0.039069 Jy/beam ! Clean residual mean=-0.000037 rms=0.013803 Jy/beam ! Combined flux in latest and established models = 0.184706 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 92 components and 0.184706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154228Jy sigma=0.001140 ! Fit after self-cal, rms=0.153062Jy sigma=0.001132 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.62 FD 1.18 HN 1.40 KP 2.51 ! LA 0.49 MK 1.45 NL 3.10 OV 5.26 ! PT 0.58 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.19 HN 1.24 KP 2.17 ! LA 0.47 MK 1.57 NL 2.97 OV 5.09 ! PT 0.56 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.19 HN 1.07 KP 2.10 ! LA 0.47 MK 1.44 NL 2.83 OV 4.51 ! PT 0.56 ! ! ! Correcting IF 4. ! A total of 129 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.80 KP 1.00* ! LA 1.00* MK 0.81 NL 1.00* OV 1.21 ! PT 0.79 ! ! ! Fit before self-cal, rms=0.153062Jy sigma=0.001132 ! Fit after self-cal, rms=0.456399Jy sigma=0.000784 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.352 mas, bmaj=22.41 mas, bpa=-16.15 degrees ! Estimated noise=804.377 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00557598 Jy ! Component: 100 - total flux cleaned = 0.00570968 Jy ! Component: 150 - total flux cleaned = 0.00571115 Jy ! Component: 200 - total flux cleaned = 0.00570721 Jy ! Total flux subtracted in 200 components = 0.00570721 Jy ! Clean residual min=-0.020119 max=0.019125 Jy/beam ! Clean residual mean=-0.000236 rms=0.006420 Jy/beam ! Combined flux in latest and established models = 0.190413 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 100 components and 0.190413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.455375Jy sigma=0.000786 ! Fit after self-cal, rms=0.466256Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.466256Jy sigma=0.000766 ! Fit after self-cal, rms=0.702021Jy sigma=0.000676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.553 mas, bmaj=22.19 mas, bpa=-16.71 degrees ! Estimated noise=879.611 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256492 Jy ! Component: 100 - total flux cleaned = 0.00265405 Jy ! Component: 150 - total flux cleaned = 0.00252936 Jy ! Component: 200 - total flux cleaned = 0.0024207 Jy ! Total flux subtracted in 200 components = 0.0024207 Jy ! Clean residual min=-0.012606 max=0.011995 Jy/beam ! Clean residual mean=-0.000019 rms=0.002970 Jy/beam ! Combined flux in latest and established models = 0.192834 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 109 components and 0.192834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.701815Jy sigma=0.000677 ! Fit after self-cal, rms=0.704560Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.002451 Jy ! Component: 100 - total flux cleaned = -0.00260737 Jy ! Component: 150 - total flux cleaned = -0.00256854 Jy ! Component: 200 - total flux cleaned = -0.00253129 Jy ! Total flux subtracted in 200 components = -0.00253129 Jy ! Clean residual min=-0.010076 max=0.009671 Jy/beam ! Clean residual mean=-0.000023 rms=0.002542 Jy/beam ! Combined flux in latest and established models = 0.190302 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 117 components and 0.190302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.704570Jy sigma=0.000672 ! Fit after self-cal, rms=0.704571Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.704571Jy sigma=0.000672 ! Fit after self-cal, rms=0.805971Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.642 mas, bmaj=22.66 mas, bpa=-16.89 degrees ! Estimated noise=905.828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128274 Jy ! Component: 100 - total flux cleaned = 0.00150833 Jy ! Component: 150 - total flux cleaned = 0.0015669 Jy ! Component: 200 - total flux cleaned = 0.00147103 Jy ! Total flux subtracted in 200 components = 0.00147103 Jy ! Clean residual min=-0.010302 max=0.009954 Jy/beam ! Clean residual mean=-0.000009 rms=0.002593 Jy/beam ! Combined flux in latest and established models = 0.191773 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 122 components and 0.191773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.805886Jy sigma=0.000671 ! Fit after self-cal, rms=0.806629Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000955805 Jy ! Component: 100 - total flux cleaned = -0.00101068 Jy ! Component: 150 - total flux cleaned = -0.00105342 Jy ! Component: 200 - total flux cleaned = -0.00101637 Jy ! Total flux subtracted in 200 components = -0.00101637 Jy ! Clean residual min=-0.009812 max=0.009619 Jy/beam ! Clean residual mean=-0.000008 rms=0.002507 Jy/beam ! Combined flux in latest and established models = 0.190757 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 125 components and 0.190757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.806626Jy sigma=0.000670 ! Fit after self-cal, rms=0.806627Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.806627Jy sigma=0.000670 ! Fit after self-cal, rms=0.893594Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.894 mas, bmaj=27.55 mas, bpa=-11.55 degrees ! Estimated noise=917.872 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145499 Jy ! Component: 100 - total flux cleaned = 0.00151923 Jy ! Component: 150 - total flux cleaned = 0.00156218 Jy ! Component: 200 - total flux cleaned = 0.00152953 Jy ! Total flux subtracted in 200 components = 0.00152953 Jy ! Clean residual min=-0.012959 max=0.012316 Jy/beam ! Clean residual mean=-0.000008 rms=0.003456 Jy/beam ! Combined flux in latest and established models = 0.192287 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 147 components and 0.192287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.893548Jy sigma=0.000670 ! Fit after self-cal, rms=0.893903Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194955 Jy ! Component: 100 - total flux cleaned = -0.000299017 Jy ! Component: 150 - total flux cleaned = -0.000338029 Jy ! Component: 200 - total flux cleaned = -0.000395713 Jy ! Total flux subtracted in 200 components = -0.000395713 Jy ! Clean residual min=-0.012784 max=0.012188 Jy/beam ! Clean residual mean=-0.000007 rms=0.003421 Jy/beam ! Combined flux in latest and established models = 0.191891 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 161 components and 0.191891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.893891Jy sigma=0.000670 ! Fit after self-cal, rms=0.893896Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.693 mas, bmaj=23.04 mas, bpa=-17.07 degrees ! Estimated noise=924.58 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.693 x 23.04 at -17.07 degrees (North through East) ! Clean map min=-0.0094293 max=0.085884 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.988 mas, bmaj=17.04 mas, bpa=-19.52 degrees ! Estimated noise=2513.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0729716 Jy ! Component: 100 - total flux cleaned = 0.107877 Jy ! Component: 150 - total flux cleaned = 0.131693 Jy ! Component: 200 - total flux cleaned = 0.148418 Jy ! Total flux subtracted in 200 components = 0.148418 Jy ! Clean residual min=-0.012153 max=0.013568 Jy/beam ! Clean residual mean=-0.000028 rms=0.003640 Jy/beam ! Combined flux in latest and established models = 0.148418 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.148418 Jy ! Inverting map and beam ! Estimated beam: bmin=4.693 mas, bmaj=23.04 mas, bpa=-17.07 degrees ! Estimated noise=924.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018606 Jy ! Component: 100 - total flux cleaned = 0.0284366 Jy ! Component: 150 - total flux cleaned = 0.0339237 Jy ! Component: 200 - total flux cleaned = 0.0370571 Jy ! Total flux subtracted in 200 components = 0.0370571 Jy ! Clean residual min=-0.011075 max=0.008867 Jy/beam ! Clean residual mean=0.000000 rms=0.002712 Jy/beam ! Combined flux in latest and established models = 0.185475 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 84 components and 0.185475 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.894 mas, bmaj=27.55 mas, bpa=-11.55 degrees ! Estimated noise=917.872 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238019 Jy ! Component: 100 - total flux cleaned = 0.00277902 Jy ! Component: 150 - total flux cleaned = 0.00297929 Jy ! Component: 200 - total flux cleaned = 0.00316254 Jy ! Total flux subtracted in 200 components = 0.00316254 Jy ! Clean residual min=-0.013475 max=0.011617 Jy/beam ! Clean residual mean=0.000001 rms=0.003503 Jy/beam ! Combined flux in latest and established models = 0.188638 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207029 Jy ! Component: 100 - total flux cleaned = 0.00035809 Jy ! Component: 150 - total flux cleaned = 0.000528376 Jy ! Component: 200 - total flux cleaned = 0.000653054 Jy ! Total flux subtracted in 200 components = 0.000653054 Jy ! Clean residual min=-0.013350 max=0.011732 Jy/beam ! Clean residual mean=-0.000001 rms=0.003484 Jy/beam ! Combined flux in latest and established models = 0.189291 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.189291 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.693 mas, bmaj=23.04 mas, bpa=-17.07 degrees ! Estimated noise=924.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000317359 Jy ! Component: 100 - total flux cleaned = -0.000219805 Jy ! Component: 150 - total flux cleaned = -4.619e-05 Jy ! Component: 200 - total flux cleaned = 3.67411e-05 Jy ! Total flux subtracted in 200 components = 3.67411e-05 Jy ! Clean residual min=-0.010328 max=0.009542 Jy/beam ! Clean residual mean=-0.000002 rms=0.002607 Jy/beam ! Combined flux in latest and established models = 0.189328 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 105 components and 0.189328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.893838Jy sigma=0.000670 ! Fit after self-cal, rms=0.893770Jy sigma=0.000670 wmodel J1818-1108_S_2017_09_26_pus_map.mod ! Writing 105 model components to file: J1818-1108_S_2017_09_26_pus_map.mod wobs J1818-1108_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1818-1108_S_2017_09_26_pus_uvs.fits wwins J1818-1108_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1818-1108_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00144661 Jy ! Component: 100 - total flux cleaned = -0.00156971 Jy ! Component: 150 - total flux cleaned = -0.00192453 Jy ! Component: 200 - total flux cleaned = -0.00225234 Jy ! Component: 250 - total flux cleaned = -0.00246074 Jy ! Component: 300 - total flux cleaned = -0.00235815 Jy ! Component: 350 - total flux cleaned = -0.0026495 Jy ! Component: 400 - total flux cleaned = -0.00293187 Jy ! Component: 450 - total flux cleaned = -0.00365966 Jy ! Component: 500 - total flux cleaned = -0.00419098 Jy ! Component: 550 - total flux cleaned = -0.00453717 Jy ! Component: 600 - total flux cleaned = -0.00521549 Jy ! Component: 650 - total flux cleaned = -0.00587577 Jy ! Component: 700 - total flux cleaned = -0.00668314 Jy ! Component: 750 - total flux cleaned = -0.00723783 Jy ! Component: 800 - total flux cleaned = -0.00793528 Jy ! Component: 850 - total flux cleaned = -0.00839058 Jy ! Component: 900 - total flux cleaned = -0.00905844 Jy ! Component: 950 - total flux cleaned = -0.00956723 Jy ! Component: 1000 - total flux cleaned = -0.010209 Jy ! Component: 1050 - total flux cleaned = -0.0103486 Jy ! Component: 1100 - total flux cleaned = -0.0107625 Jy ! Component: 1150 - total flux cleaned = -0.0113715 Jy ! Component: 1200 - total flux cleaned = -0.011903 Jy ! Component: 1250 - total flux cleaned = -0.0122952 Jy ! Component: 1300 - total flux cleaned = -0.0128103 Jy ! Component: 1350 - total flux cleaned = -0.0133157 Jy ! Component: 1400 - total flux cleaned = -0.0138743 Jy ! Component: 1450 - total flux cleaned = -0.0142427 Jy ! Component: 1500 - total flux cleaned = -0.0148458 Jy ! Component: 1550 - total flux cleaned = -0.0153788 Jy ! Component: 1600 - total flux cleaned = -0.0159038 Jy ! Component: 1650 - total flux cleaned = -0.0161921 Jy ! Component: 1700 - total flux cleaned = -0.0165916 Jy ! Component: 1750 - total flux cleaned = -0.0169296 Jy ! Component: 1800 - total flux cleaned = -0.0173185 Jy ! Component: 1850 - total flux cleaned = -0.0175922 Jy ! Component: 1900 - total flux cleaned = -0.0177009 Jy ! Component: 1950 - total flux cleaned = -0.0178624 Jy ! Component: 2000 - total flux cleaned = -0.0180756 Jy ! Component: 2050 - total flux cleaned = -0.0182872 Jy ! Component: 2100 - total flux cleaned = -0.0185502 Jy ! Component: 2150 - total flux cleaned = -0.0188108 Jy ! Component: 2200 - total flux cleaned = -0.0189659 Jy ! Component: 2250 - total flux cleaned = -0.0190692 Jy ! Component: 2300 - total flux cleaned = -0.0192745 Jy ! Component: 2350 - total flux cleaned = -0.0194787 Jy ! Component: 2400 - total flux cleaned = -0.0194789 Jy ! Component: 2450 - total flux cleaned = -0.0196816 Jy ! Component: 2500 - total flux cleaned = -0.0197319 Jy ! Component: 2550 - total flux cleaned = -0.0197823 Jy ! Component: 2600 - total flux cleaned = -0.0199327 Jy ! Component: 2650 - total flux cleaned = -0.0200326 Jy ! Component: 2700 - total flux cleaned = -0.0200829 Jy ! Component: 2750 - total flux cleaned = -0.0201329 Jy ! Component: 2800 - total flux cleaned = -0.0203322 Jy ! Component: 2850 - total flux cleaned = -0.0204311 Jy ! Component: 2900 - total flux cleaned = -0.020431 Jy ! Component: 2950 - total flux cleaned = -0.0206288 Jy ! Component: 3000 - total flux cleaned = -0.0207771 Jy ! Component: 3050 - total flux cleaned = -0.020925 Jy ! Component: 3100 - total flux cleaned = -0.0210729 Jy ! Component: 3150 - total flux cleaned = -0.0212702 Jy ! Component: 3200 - total flux cleaned = -0.0213689 Jy ! Component: 3250 - total flux cleaned = -0.0213192 Jy ! Component: 3300 - total flux cleaned = -0.0214179 Jy ! Component: 3350 - total flux cleaned = -0.0215665 Jy ! Component: 3400 - total flux cleaned = -0.0215667 Jy ! Component: 3450 - total flux cleaned = -0.0216166 Jy ! Component: 3500 - total flux cleaned = -0.0216668 Jy ! Component: 3550 - total flux cleaned = -0.0217672 Jy ! Component: 3600 - total flux cleaned = -0.0218176 Jy ! Component: 3650 - total flux cleaned = -0.0218682 Jy ! Component: 3700 - total flux cleaned = -0.0219188 Jy ! Component: 3750 - total flux cleaned = -0.022021 Jy ! Component: 3800 - total flux cleaned = -0.0220209 Jy ! Component: 3850 - total flux cleaned = -0.0221752 Jy ! Component: 3900 - total flux cleaned = -0.0222783 Jy ! Component: 3950 - total flux cleaned = -0.0222782 Jy ! Component: 4000 - total flux cleaned = -0.0224343 Jy ! Component: 4050 - total flux cleaned = -0.0224342 Jy ! Total flux subtracted in 4096 components = -0.0224346 Jy ! Clean residual min=-0.003053 max=0.003447 Jy/beam ! Clean residual mean=0.000028 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.166893 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 426 components and 0.166893 Jy ![Exited script file: muppet] wmap "J1818-1108_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.693 x 23.04 at -17.07 degrees (North through East) ! Clean map min=-0.008073 max=0.086485 Jy/beam ! Writing clean map to FITS file: J1818-1108_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.086485 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000992382 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.44238 3.44238 6.88477 13.7695 27.5391 55.0781 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.693 x 23.04 at -17.07 degrees (North through East) ! Clean map min=-0.008073 max=0.086485 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1818-1108_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:04:30 2019