! Started logfile: J1814+4113_S_2017_06_10_pus_uvs.log on Mon May 6 14:59:45 2019 obs J1814+4113_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1814+4113_S_2017_06_10_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.955556 visibilities/baseline/integration-bin. ! Found source: J1814+4113 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 14276 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1814+4113_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 437 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.918912Jy sigma=0.009870 ! Fit after self-cal, rms=0.911285Jy sigma=0.009795 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=4.951 mas, bpa=-10.07 degrees ! Estimated noise=942.328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0650346 Jy ! Component: 100 - total flux cleaned = 0.0920113 Jy ! Total flux subtracted in 100 components = 0.0920113 Jy ! Clean residual min=-0.007955 max=0.020077 Jy/beam ! Clean residual mean=0.000025 rms=0.002133 Jy/beam ! Combined flux in latest and established models = 0.0920113 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0920113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082482Jy sigma=0.000860 ! Fit after self-cal, rms=0.082100Jy sigma=0.000856 ! Inverting map ! Added new window around map position (4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198597 Jy ! Component: 100 - total flux cleaned = 0.0297954 Jy ! Total flux subtracted in 100 components = 0.0297954 Jy ! Clean residual min=-0.006256 max=0.017188 Jy/beam ! Clean residual mean=0.000016 rms=0.001634 Jy/beam ! Combined flux in latest and established models = 0.121807 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.121807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076378Jy sigma=0.000791 ! Fit after self-cal, rms=0.075974Jy sigma=0.000787 ! Inverting map ! Added new window around map position (12, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161074 Jy ! Component: 100 - total flux cleaned = 0.0247003 Jy ! Total flux subtracted in 100 components = 0.0247003 Jy ! Clean residual min=-0.005378 max=0.005241 Jy/beam ! Clean residual mean=0.000011 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.146507 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 35 components and 0.146507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071812Jy sigma=0.000737 ! Fit after self-cal, rms=0.071340Jy sigma=0.000732 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.591 mas, bmaj=5.914 mas, bpa=-9.984 degrees ! Estimated noise=627.542 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101416 Jy ! Component: 100 - total flux cleaned = 0.0166586 Jy ! Component: 150 - total flux cleaned = 0.0212646 Jy ! Component: 200 - total flux cleaned = 0.0246331 Jy ! Total flux subtracted in 200 components = 0.0246331 Jy ! Clean residual min=-0.004568 max=0.007864 Jy/beam ! Clean residual mean=0.000024 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 0.17114 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 68 components and 0.17114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069700Jy sigma=0.000713 ! Fit after self-cal, rms=0.069534Jy sigma=0.000711 ! Inverting map ! Added new window around map position (33, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00862021 Jy ! Component: 100 - total flux cleaned = 0.0140829 Jy ! Component: 150 - total flux cleaned = 0.0181669 Jy ! Component: 200 - total flux cleaned = 0.0215049 Jy ! Total flux subtracted in 200 components = 0.0215049 Jy ! Clean residual min=-0.003833 max=0.005439 Jy/beam ! Clean residual mean=0.000012 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.192645 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 125 components and 0.192645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068261Jy sigma=0.000697 ! Fit after self-cal, rms=0.068078Jy sigma=0.000695 ! Inverting map ! Added new window around map position (22.5, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637291 Jy ! Component: 100 - total flux cleaned = 0.0102073 Jy ! Component: 150 - total flux cleaned = 0.0131624 Jy ! Component: 200 - total flux cleaned = 0.0156123 Jy ! Total flux subtracted in 200 components = 0.0156123 Jy ! Clean residual min=-0.003120 max=0.002855 Jy/beam ! Clean residual mean=0.000008 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.208257 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 181 components and 0.208257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067400Jy sigma=0.000687 ! Fit after self-cal, rms=0.067306Jy sigma=0.000686 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.92 HN 0.96 KP 1.05 ! LA 0.98 MK 1.01 NL 0.94 OV 1.05 ! PT 0.97 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.99 HN 0.98 KP 0.98 ! LA 0.93 MK 1.01 NL 1.01 OV 1.02 ! PT 0.98 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.01 KP 1.00 ! LA 0.97 MK 1.06 NL 1.06 OV 0.94 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.96 KP 1.00* ! LA 1.02 MK 1.15 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.067306Jy sigma=0.000686 ! Fit after self-cal, rms=0.066165Jy sigma=0.000681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.626 mas, bmaj=5.942 mas, bpa=-9.683 degrees ! Estimated noise=619.718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232486 Jy ! Component: 100 - total flux cleaned = 0.00368952 Jy ! Component: 150 - total flux cleaned = 0.00473708 Jy ! Component: 200 - total flux cleaned = 0.00563023 Jy ! Total flux subtracted in 200 components = 0.00563023 Jy ! Clean residual min=-0.002545 max=0.002752 Jy/beam ! Clean residual mean=0.000005 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.213888 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 202 components and 0.213888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066012Jy sigma=0.000679 ! Fit after self-cal, rms=0.066001Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066001Jy sigma=0.000679 ! Fit after self-cal, rms=0.064979Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.606 mas, bmaj=5.93 mas, bpa=-9.62 degrees ! Estimated noise=615.297 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119896 Jy ! Component: 100 - total flux cleaned = 0.00208334 Jy ! Component: 150 - total flux cleaned = 0.0027754 Jy ! Component: 200 - total flux cleaned = 0.00339738 Jy ! Total flux subtracted in 200 components = 0.00339738 Jy ! Clean residual min=-0.001887 max=0.002392 Jy/beam ! Clean residual mean=-0.000000 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.217285 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 232 components and 0.217285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064907Jy sigma=0.000672 ! Fit after self-cal, rms=0.064920Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (41.5, 16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223388 Jy ! Component: 100 - total flux cleaned = 0.00339675 Jy ! Component: 150 - total flux cleaned = 0.00420766 Jy ! Component: 200 - total flux cleaned = 0.00490446 Jy ! Total flux subtracted in 200 components = 0.00490446 Jy ! Clean residual min=-0.001846 max=0.002175 Jy/beam ! Clean residual mean=-0.000002 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.222189 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 257 components and 0.222189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064832Jy sigma=0.000670 ! Fit after self-cal, rms=0.064821Jy sigma=0.000670 ! Inverting map ! Added new window around map position (-87, -52). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185888 Jy ! Component: 100 - total flux cleaned = 0.0025399 Jy ! Component: 150 - total flux cleaned = 0.00297714 Jy ! Component: 200 - total flux cleaned = 0.00337069 Jy ! Total flux subtracted in 200 components = 0.00337069 Jy ! Clean residual min=-0.001859 max=0.001840 Jy/beam ! Clean residual mean=-0.000001 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.22556 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 282 components and 0.22556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064755Jy sigma=0.000670 ! Fit after self-cal, rms=0.064752Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064752Jy sigma=0.000669 ! Fit after self-cal, rms=0.064266Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.6 mas, bmaj=5.929 mas, bpa=-9.737 degrees ! Estimated noise=609.876 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000599536 Jy ! Component: 100 - total flux cleaned = 0.00126892 Jy ! Component: 150 - total flux cleaned = 0.001865 Jy ! Component: 200 - total flux cleaned = 0.00229534 Jy ! Total flux subtracted in 200 components = 0.00229534 Jy ! Clean residual min=-0.001855 max=0.001724 Jy/beam ! Clean residual mean=-0.000000 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.227855 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 293 components and 0.227855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064234Jy sigma=0.000669 ! Fit after self-cal, rms=0.064236Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000348976 Jy ! Component: 100 - total flux cleaned = 0.00076308 Jy ! Component: 150 - total flux cleaned = 0.00102114 Jy ! Component: 200 - total flux cleaned = 0.00124174 Jy ! Total flux subtracted in 200 components = 0.00124174 Jy ! Clean residual min=-0.001811 max=0.001715 Jy/beam ! Clean residual mean=-0.000001 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.229097 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 300 components and 0.229097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064216Jy sigma=0.000669 ! Fit after self-cal, rms=0.064215Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064215Jy sigma=0.000669 ! Fit after self-cal, rms=0.064011Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.713 mas, bmaj=9.458 mas, bpa=-6.534 degrees ! Estimated noise=752.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108587 Jy ! Component: 100 - total flux cleaned = 0.00167401 Jy ! Component: 150 - total flux cleaned = 0.00217756 Jy ! Component: 200 - total flux cleaned = 0.00253083 Jy ! Total flux subtracted in 200 components = 0.00253083 Jy ! Clean residual min=-0.002276 max=0.002046 Jy/beam ! Clean residual mean=-0.000001 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.231628 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 327 components and 0.231628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063998Jy sigma=0.000668 ! Fit after self-cal, rms=0.063998Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411891 Jy ! Component: 100 - total flux cleaned = 0.000734692 Jy ! Component: 150 - total flux cleaned = 0.000889791 Jy ! Component: 200 - total flux cleaned = 0.00103273 Jy ! Total flux subtracted in 200 components = 0.00103273 Jy ! Clean residual min=-0.002253 max=0.002020 Jy/beam ! Clean residual mean=-0.000002 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.232661 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 339 components and 0.232661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063991Jy sigma=0.000668 ! Fit after self-cal, rms=0.063990Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.599 mas, bmaj=5.926 mas, bpa=-9.845 degrees ! Estimated noise=607.738 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.599 x 5.926 at -9.845 degrees (North through East) ! Clean map min=-0.0016978 max=0.081639 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=4.978 mas, bpa=-10.17 degrees ! Estimated noise=921.223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0647819 Jy ! Component: 100 - total flux cleaned = 0.0955539 Jy ! Component: 150 - total flux cleaned = 0.115236 Jy ! Component: 200 - total flux cleaned = 0.128975 Jy ! Total flux subtracted in 200 components = 0.128975 Jy ! Clean residual min=-0.004603 max=0.007658 Jy/beam ! Clean residual mean=0.000018 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.128975 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.128975 Jy ! Inverting map and beam ! Estimated beam: bmin=3.599 mas, bmaj=5.926 mas, bpa=-9.845 degrees ! Estimated noise=607.738 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151644 Jy ! Component: 100 - total flux cleaned = 0.0268678 Jy ! Component: 150 - total flux cleaned = 0.0364103 Jy ! Component: 200 - total flux cleaned = 0.0443505 Jy ! Total flux subtracted in 200 components = 0.0443505 Jy ! Clean residual min=-0.003590 max=0.005064 Jy/beam ! Clean residual mean=0.000021 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.173326 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 89 components and 0.173326 Jy ! Inverting map ! Added new window around map position (16, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00672105 Jy ! Component: 100 - total flux cleaned = 0.0124656 Jy ! Component: 150 - total flux cleaned = 0.0174332 Jy ! Component: 200 - total flux cleaned = 0.0217507 Jy ! Total flux subtracted in 200 components = 0.0217507 Jy ! Clean residual min=-0.002673 max=0.002777 Jy/beam ! Clean residual mean=0.000011 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.195077 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 160 components and 0.195077 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.713 mas, bmaj=9.458 mas, bpa=-6.534 degrees ! Estimated noise=752.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00694693 Jy ! Component: 100 - total flux cleaned = 0.0120679 Jy ! Component: 150 - total flux cleaned = 0.0161039 Jy ! Component: 200 - total flux cleaned = 0.0194406 Jy ! Total flux subtracted in 200 components = 0.0194406 Jy ! Clean residual min=-0.002907 max=0.002588 Jy/beam ! Clean residual mean=0.000008 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.214517 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279902 Jy ! Component: 100 - total flux cleaned = 0.0051855 Jy ! Component: 150 - total flux cleaned = 0.00723571 Jy ! Component: 200 - total flux cleaned = 0.00900952 Jy ! Total flux subtracted in 200 components = 0.00900952 Jy ! Clean residual min=-0.002568 max=0.001915 Jy/beam ! Clean residual mean=0.000003 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.223527 Jy ! Adding 178 model components to the UV plane model. ! The established model now contains 320 components and 0.223527 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.599 mas, bmaj=5.926 mas, bpa=-9.845 degrees ! Estimated noise=607.738 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160043 Jy ! Component: 100 - total flux cleaned = 0.00267028 Jy ! Component: 150 - total flux cleaned = 0.00340233 Jy ! Component: 200 - total flux cleaned = 0.00407311 Jy ! Total flux subtracted in 200 components = 0.00407311 Jy ! Clean residual min=-0.001761 max=0.001719 Jy/beam ! Clean residual mean=0.000001 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.2276 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 347 components and 0.2276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064046Jy sigma=0.000669 ! Fit after self-cal, rms=0.064009Jy sigma=0.000669 wmodel J1814+4113_S_2017_06_10_pus_map.mod ! Writing 347 model components to file: J1814+4113_S_2017_06_10_pus_map.mod wobs J1814+4113_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1814+4113_S_2017_06_10_pus_uvs.fits wwins J1814+4113_S_2017_06_10_pus_map.win ! wwins: Wrote 8 windows to J1814+4113_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000498534 Jy ! Component: 100 - total flux cleaned = -0.000703475 Jy ! Component: 150 - total flux cleaned = -0.000925914 Jy ! Component: 200 - total flux cleaned = -0.0011124 Jy ! Component: 250 - total flux cleaned = -0.00113799 Jy ! Component: 300 - total flux cleaned = -0.0011379 Jy ! Component: 350 - total flux cleaned = -0.00118628 Jy ! Component: 400 - total flux cleaned = -0.00125689 Jy ! Component: 450 - total flux cleaned = -0.00134832 Jy ! Component: 500 - total flux cleaned = -0.00141538 Jy ! Component: 550 - total flux cleaned = -0.00139359 Jy ! Component: 600 - total flux cleaned = -0.00145851 Jy ! Component: 650 - total flux cleaned = -0.00150077 Jy ! Component: 700 - total flux cleaned = -0.00152124 Jy ! Component: 750 - total flux cleaned = -0.00152077 Jy ! Component: 800 - total flux cleaned = -0.00146112 Jy ! Component: 850 - total flux cleaned = -0.00151973 Jy ! Component: 900 - total flux cleaned = -0.00148142 Jy ! Component: 950 - total flux cleaned = -0.00151863 Jy ! Component: 1000 - total flux cleaned = -0.00151853 Jy ! Component: 1050 - total flux cleaned = -0.00159179 Jy ! Component: 1100 - total flux cleaned = -0.00164573 Jy ! Component: 1150 - total flux cleaned = -0.00176997 Jy ! Component: 1200 - total flux cleaned = -0.00192747 Jy ! Component: 1250 - total flux cleaned = -0.00203102 Jy ! Component: 1300 - total flux cleaned = -0.00215042 Jy ! Component: 1350 - total flux cleaned = -0.00230199 Jy ! Component: 1400 - total flux cleaned = -0.00243497 Jy ! Component: 1450 - total flux cleaned = -0.00258253 Jy ! Component: 1500 - total flux cleaned = -0.00274452 Jy ! Component: 1550 - total flux cleaned = -0.00285643 Jy ! Component: 1600 - total flux cleaned = -0.00291979 Jy ! Component: 1650 - total flux cleaned = -0.00309179 Jy ! Component: 1700 - total flux cleaned = -0.00315392 Jy ! Component: 1750 - total flux cleaned = -0.0033069 Jy ! Component: 1800 - total flux cleaned = -0.00335237 Jy ! Component: 1850 - total flux cleaned = -0.00344228 Jy ! Component: 1900 - total flux cleaned = -0.00359025 Jy ! Component: 1950 - total flux cleaned = -0.00366347 Jy ! Component: 2000 - total flux cleaned = -0.00377932 Jy ! Component: 2050 - total flux cleaned = -0.0038944 Jy ! Component: 2100 - total flux cleaned = -0.00397966 Jy ! Component: 2150 - total flux cleaned = -0.00413475 Jy ! Component: 2200 - total flux cleaned = -0.00428818 Jy ! Component: 2250 - total flux cleaned = -0.00441243 Jy ! Component: 2300 - total flux cleaned = -0.00453555 Jy ! Component: 2350 - total flux cleaned = -0.00464422 Jy ! Component: 2400 - total flux cleaned = -0.00481902 Jy ! Component: 2450 - total flux cleaned = -0.00492541 Jy ! Component: 2500 - total flux cleaned = -0.00501776 Jy ! Component: 2550 - total flux cleaned = -0.00510946 Jy ! Component: 2600 - total flux cleaned = -0.00522647 Jy ! Component: 2650 - total flux cleaned = -0.00531646 Jy ! Component: 2700 - total flux cleaned = -0.00539308 Jy ! Component: 2750 - total flux cleaned = -0.0054819 Jy ! Component: 2800 - total flux cleaned = -0.00560764 Jy ! Component: 2850 - total flux cleaned = -0.00571998 Jy ! Component: 2900 - total flux cleaned = -0.00575712 Jy ! Component: 2950 - total flux cleaned = -0.00589234 Jy ! Component: 3000 - total flux cleaned = -0.00596546 Jy ! Component: 3050 - total flux cleaned = -0.00607435 Jy ! Component: 3100 - total flux cleaned = -0.00617052 Jy ! Component: 3150 - total flux cleaned = -0.00627767 Jy ! Component: 3200 - total flux cleaned = -0.00634852 Jy ! Component: 3250 - total flux cleaned = -0.00640726 Jy ! Component: 3300 - total flux cleaned = -0.00648891 Jy ! Component: 3350 - total flux cleaned = -0.00655854 Jy ! Component: 3400 - total flux cleaned = -0.0066505 Jy ! Component: 3450 - total flux cleaned = -0.00674194 Jy ! Component: 3500 - total flux cleaned = -0.00678724 Jy ! Component: 3550 - total flux cleaned = -0.00686606 Jy ! Component: 3600 - total flux cleaned = -0.00689948 Jy ! Component: 3650 - total flux cleaned = -0.00697725 Jy ! Component: 3700 - total flux cleaned = -0.00701037 Jy ! Component: 3750 - total flux cleaned = -0.00704325 Jy ! Component: 3800 - total flux cleaned = -0.00706516 Jy ! Component: 3850 - total flux cleaned = -0.00709761 Jy ! Component: 3900 - total flux cleaned = -0.00716233 Jy ! Component: 3950 - total flux cleaned = -0.00721592 Jy ! Component: 4000 - total flux cleaned = -0.00723725 Jy ! Component: 4050 - total flux cleaned = -0.00724788 Jy ! Total flux subtracted in 4096 components = -0.00726906 Jy ! Clean residual min=-0.000680 max=0.000689 Jy/beam ! Clean residual mean=0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.220331 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 675 components and 0.220331 Jy ![Exited script file: muppet] wmap "J1814+4113_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.599 x 5.926 at -9.845 degrees (North through East) ! Clean map min=-0.0012321 max=0.080788 Jy/beam ! Writing clean map to FITS file: J1814+4113_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0807884 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000195339 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.725372 0.725372 1.45074 2.90149 5.80298 11.606 23.2119 46.4238 92.8476 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.599 x 5.926 at -9.845 degrees (North through East) ! Clean map min=-0.0012321 max=0.080788 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1814+4113_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:59:51 2019