! Started logfile: J1810+5649_X_2017_07_16_pus_uvs.log on Thu May 9 14:08:35 2019 obs J1810+5649_X_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1810+5649_X_2017_07_16_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.765079 visibilities/baseline/integration-bin. ! Found source: J1810+5649 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1200 lines of history. ! ! Reading 34704 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1810+5649_X_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.540651Jy sigma=0.004322 ! Fit after self-cal, rms=0.495145Jy sigma=0.003997 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.8517 mas, bmaj=0.9452 mas, bpa=-20.99 degrees ! Estimated noise=864.553 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.397997 Jy ! Component: 100 - total flux cleaned = 0.493793 Jy ! Total flux subtracted in 100 components = 0.493793 Jy ! Clean residual min=-0.023346 max=0.080837 Jy/beam ! Clean residual mean=-0.000271 rms=0.006783 Jy/beam ! Combined flux in latest and established models = 0.493793 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.493793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.154067Jy sigma=0.001299 ! Fit after self-cal, rms=0.153961Jy sigma=0.001298 ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (-1.2, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0711262 Jy ! Component: 100 - total flux cleaned = 0.111724 Jy ! Total flux subtracted in 100 components = 0.111724 Jy ! Clean residual min=-0.011884 max=0.028992 Jy/beam ! Clean residual mean=-0.000180 rms=0.003692 Jy/beam ! Combined flux in latest and established models = 0.605517 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.605517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111890Jy sigma=0.000920 ! Fit after self-cal, rms=0.110987Jy sigma=0.000912 ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (0.6, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0305744 Jy ! Component: 100 - total flux cleaned = 0.0526323 Jy ! Total flux subtracted in 100 components = 0.0526323 Jy ! Clean residual min=-0.008786 max=0.016531 Jy/beam ! Clean residual mean=-0.000139 rms=0.002673 Jy/beam ! Combined flux in latest and established models = 0.65815 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 31 components and 0.65815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098532Jy sigma=0.000790 ! Fit after self-cal, rms=0.098299Jy sigma=0.000788 ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (-0.4, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190904 Jy ! Component: 100 - total flux cleaned = 0.0334328 Jy ! Total flux subtracted in 100 components = 0.0334328 Jy ! Clean residual min=-0.007175 max=0.015014 Jy/beam ! Clean residual mean=-0.000113 rms=0.002164 Jy/beam ! Combined flux in latest and established models = 0.691582 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 40 components and 0.691583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092822Jy sigma=0.000734 ! Fit after self-cal, rms=0.092716Jy sigma=0.000734 ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (2.4, -2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149015 Jy ! Component: 100 - total flux cleaned = 0.0256733 Jy ! Total flux subtracted in 100 components = 0.0256733 Jy ! Clean residual min=-0.005868 max=0.009096 Jy/beam ! Clean residual mean=-0.000086 rms=0.001767 Jy/beam ! Combined flux in latest and established models = 0.717256 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.717256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089511Jy sigma=0.000704 ! Fit after self-cal, rms=0.089449Jy sigma=0.000703 ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.019 mas, bmaj=1.172 mas, bpa=-12.18 degrees ! Estimated noise=463.141 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126232 Jy ! Component: 100 - total flux cleaned = 0.0215853 Jy ! Component: 150 - total flux cleaned = 0.0283744 Jy ! Component: 200 - total flux cleaned = 0.0335723 Jy ! Total flux subtracted in 200 components = 0.0335723 Jy ! Clean residual min=-0.005988 max=0.007456 Jy/beam ! Clean residual mean=-0.000110 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.750828 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 70 components and 0.750828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087291Jy sigma=0.000681 ! Fit after self-cal, rms=0.087230Jy sigma=0.000680 ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.99 KP 1.01 ! LA 0.95 MK 0.97 NL 0.97 OV 1.01 ! PT 0.99 SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.02 KP 1.07 ! LA 0.95 MK 0.97 NL 0.96 OV 1.00 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.02 KP 1.00 ! LA 0.97 MK 0.99 NL 0.97 OV 1.00 ! PT 0.98 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.01 KP 1.02 ! LA 0.98 MK 0.98 NL 0.96 OV 0.99 ! PT 1.00 SC 1.09 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.96 KP 1.02 ! LA 0.96 MK 1.01 NL 0.96 OV 1.01 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.99 KP 1.03 ! LA 0.97 MK 0.99 NL 0.97 OV 1.00 ! PT 0.98 SC 1.08 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.00 KP 1.03 ! LA 0.98 MK 1.00 NL 0.96 OV 1.00 ! PT 0.99 SC 1.09 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.98 KP 1.03 ! LA 0.96 MK 1.00 NL 0.96 OV 1.01 ! PT 1.00 SC 1.11 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.98 KP 1.01 ! LA 0.97 MK 0.98 NL 0.97 OV 1.00 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.03 KP 1.01 ! LA 0.98 MK 0.99 NL 0.98 OV 1.00 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.00 KP 0.98 ! LA 0.99 MK 0.99 NL 0.97 OV 1.01 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.99 KP 1.04 ! LA 0.96 MK 0.98 NL 0.98 OV 1.01 ! PT 1.01 SC 1.07 ! ! ! Fit before self-cal, rms=0.087230Jy sigma=0.000680 ! Fit after self-cal, rms=0.085256Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.024 mas, bmaj=1.185 mas, bpa=-14.08 degrees ! Estimated noise=461.685 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455491 Jy ! Component: 100 - total flux cleaned = 0.000638779 Jy ! Component: 150 - total flux cleaned = 0.00120134 Jy ! Component: 200 - total flux cleaned = 0.00174465 Jy ! Total flux subtracted in 200 components = 0.00174465 Jy ! Clean residual min=-0.003586 max=0.004299 Jy/beam ! Clean residual mean=0.000007 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.752573 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 81 components and 0.752573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085008Jy sigma=0.000654 ! Fit after self-cal, rms=0.085024Jy sigma=0.000653 ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085024Jy sigma=0.000653 ! Fit after self-cal, rms=0.084135Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.024 mas, bmaj=1.18 mas, bpa=-12.78 degrees ! Estimated noise=460.813 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136694 Jy ! Component: 100 - total flux cleaned = 0.000398099 Jy ! Component: 150 - total flux cleaned = 0.000674907 Jy ! Component: 200 - total flux cleaned = 0.000818694 Jy ! Total flux subtracted in 200 components = 0.000818694 Jy ! Clean residual min=-0.002417 max=0.002700 Jy/beam ! Clean residual mean=-0.000027 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.753392 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 92 components and 0.753392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084052Jy sigma=0.000644 ! Fit after self-cal, rms=0.084058Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298039 Jy ! Component: 100 - total flux cleaned = 0.00497557 Jy ! Component: 150 - total flux cleaned = 0.00615641 Jy ! Component: 200 - total flux cleaned = 0.00662675 Jy ! Total flux subtracted in 200 components = 0.00662675 Jy ! Clean residual min=-0.002226 max=0.002489 Jy/beam ! Clean residual mean=-0.000012 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.760018 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 113 components and 0.760018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083934Jy sigma=0.000643 ! Fit after self-cal, rms=0.083929Jy sigma=0.000643 ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (2.8, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268026 Jy ! Component: 100 - total flux cleaned = 0.00437295 Jy ! Component: 150 - total flux cleaned = 0.00533121 Jy ! Component: 200 - total flux cleaned = 0.00603651 Jy ! Total flux subtracted in 200 components = 0.00603651 Jy ! Clean residual min=-0.001934 max=0.001843 Jy/beam ! Clean residual mean=-0.000009 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.766055 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 131 components and 0.766055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083831Jy sigma=0.000642 ! Fit after self-cal, rms=0.083827Jy sigma=0.000642 ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083827Jy sigma=0.000642 ! Fit after self-cal, rms=0.083748Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.024 mas, bmaj=1.18 mas, bpa=-12.62 degrees ! Estimated noise=460.221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560824 Jy ! Component: 100 - total flux cleaned = 0.001156 Jy ! Component: 150 - total flux cleaned = 0.00153529 Jy ! Component: 200 - total flux cleaned = 0.00181551 Jy ! Total flux subtracted in 200 components = 0.00181551 Jy ! Clean residual min=-0.001688 max=0.001747 Jy/beam ! Clean residual mean=-0.000010 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.76787 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 140 components and 0.76787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083711Jy sigma=0.000641 ! Fit after self-cal, rms=0.083711Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.8, 12.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164585 Jy ! Component: 100 - total flux cleaned = 0.00259256 Jy ! Component: 150 - total flux cleaned = 0.00333753 Jy ! Component: 200 - total flux cleaned = 0.00378971 Jy ! Total flux subtracted in 200 components = 0.00378971 Jy ! Clean residual min=-0.001602 max=0.001338 Jy/beam ! Clean residual mean=-0.000010 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.77166 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 153 components and 0.77166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083664Jy sigma=0.000641 ! Fit after self-cal, rms=0.083663Jy sigma=0.000641 ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083663Jy sigma=0.000641 ! Fit after self-cal, rms=0.083629Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=2.261 mas, bmaj=2.296 mas, bpa=64.36 degrees ! Estimated noise=586.664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126891 Jy ! Component: 100 - total flux cleaned = 0.002084 Jy ! Component: 150 - total flux cleaned = 0.002805 Jy ! Component: 200 - total flux cleaned = 0.0033901 Jy ! Total flux subtracted in 200 components = 0.0033901 Jy ! Clean residual min=-0.001659 max=0.001901 Jy/beam ! Clean residual mean=-0.000021 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.77505 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 171 components and 0.77505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083616Jy sigma=0.000641 ! Fit after self-cal, rms=0.083613Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551256 Jy ! Component: 100 - total flux cleaned = 0.00104672 Jy ! Component: 150 - total flux cleaned = 0.0014606 Jy ! Component: 200 - total flux cleaned = 0.00183246 Jy ! Total flux subtracted in 200 components = 0.00183246 Jy ! Clean residual min=-0.001567 max=0.001759 Jy/beam ! Clean residual mean=-0.000018 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.776883 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 177 components and 0.776882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083609Jy sigma=0.000641 ! Fit after self-cal, rms=0.083608Jy sigma=0.000641 ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.023 mas, bmaj=1.181 mas, bpa=-12.53 degrees ! Estimated noise=459.972 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.023 x 1.181 at -12.53 degrees (North through East) ! Clean map min=-0.0013668 max=0.52464 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083608Jy sigma=0.000641 ! Fit after self-cal, rms=0.078360Jy sigma=0.000592 ! Inverting map and beam ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.024 mas, bmaj=1.181 mas, bpa=-12.43 degrees ! Estimated noise=459.879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00039171 Jy ! Component: 100 - total flux cleaned = -0.000332522 Jy ! Component: 150 - total flux cleaned = -0.000222098 Jy ! Component: 200 - total flux cleaned = -0.000119486 Jy ! Total flux subtracted in 200 components = -0.000119486 Jy ! Clean residual min=-0.001490 max=0.001267 Jy/beam ! Clean residual mean=-0.000011 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.776763 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 189 components and 0.776763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078338Jy sigma=0.000592 ! Fit after self-cal, rms=0.078337Jy sigma=0.000592 ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.76144e-05 Jy ! Component: 100 - total flux cleaned = 0.000215008 Jy ! Component: 150 - total flux cleaned = 0.000305206 Jy ! Component: 200 - total flux cleaned = 0.000435382 Jy ! Total flux subtracted in 200 components = 0.000435382 Jy ! Clean residual min=-0.001474 max=0.001225 Jy/beam ! Clean residual mean=-0.000011 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.777198 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 195 components and 0.777198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078323Jy sigma=0.000592 ! Fit after self-cal, rms=0.078323Jy sigma=0.000592 ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078323Jy sigma=0.000592 ! Fit after self-cal, rms=0.078318Jy sigma=0.000592 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.8547 mas, bmaj=0.9539 mas, bpa=-21.82 degrees ! Estimated noise=860.838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.396002 Jy ! Component: 100 - total flux cleaned = 0.50179 Jy ! Component: 150 - total flux cleaned = 0.561598 Jy ! Component: 200 - total flux cleaned = 0.60278 Jy ! Total flux subtracted in 200 components = 0.60278 Jy ! Clean residual min=-0.010628 max=0.023010 Jy/beam ! Clean residual mean=-0.000148 rms=0.003125 Jy/beam ! Combined flux in latest and established models = 0.60278 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.60278 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.024 mas, bmaj=1.181 mas, bpa=-12.41 degrees ! Estimated noise=459.772 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0405803 Jy ! Component: 100 - total flux cleaned = 0.0676553 Jy ! Component: 150 - total flux cleaned = 0.0871623 Jy ! Component: 200 - total flux cleaned = 0.101616 Jy ! Total flux subtracted in 200 components = 0.101616 Jy ! Clean residual min=-0.004331 max=0.008342 Jy/beam ! Clean residual mean=-0.000163 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.704395 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 48 components and 0.704395 Jy ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109463 Jy ! Component: 100 - total flux cleaned = 0.0193476 Jy ! Component: 150 - total flux cleaned = 0.0258807 Jy ! Component: 200 - total flux cleaned = 0.0310922 Jy ! Total flux subtracted in 200 components = 0.0310922 Jy ! Clean residual min=-0.002509 max=0.003900 Jy/beam ! Clean residual mean=-0.000079 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.735487 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 70 components and 0.735487 Jy ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (1.4, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447909 Jy ! Component: 100 - total flux cleaned = 0.008214 Jy ! Component: 150 - total flux cleaned = 0.0114829 Jy ! Component: 200 - total flux cleaned = 0.0143838 Jy ! Total flux subtracted in 200 components = 0.0143838 Jy ! Clean residual min=-0.002058 max=0.002195 Jy/beam ! Clean residual mean=-0.000048 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.749871 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 98 components and 0.749871 Jy ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=2.26 mas, bmaj=2.296 mas, bpa=64.22 degrees ! Estimated noise=586.358 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049257 Jy ! Component: 100 - total flux cleaned = 0.0085845 Jy ! Component: 150 - total flux cleaned = 0.0115353 Jy ! Component: 200 - total flux cleaned = 0.0139837 Jy ! Total flux subtracted in 200 components = 0.0139837 Jy ! Clean residual min=-0.002480 max=0.002250 Jy/beam ! Clean residual mean=-0.000065 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.763855 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206002 Jy ! Component: 100 - total flux cleaned = 0.00382147 Jy ! Component: 150 - total flux cleaned = 0.00534976 Jy ! Component: 200 - total flux cleaned = 0.00668206 Jy ! Total flux subtracted in 200 components = 0.00668206 Jy ! Clean residual min=-0.002004 max=0.001937 Jy/beam ! Clean residual mean=-0.000045 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.770537 Jy ! Adding 114 model components to the UV plane model. ! The established model now contains 189 components and 0.770537 Jy ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.024 mas, bmaj=1.181 mas, bpa=-12.41 degrees ! Estimated noise=459.772 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121278 Jy ! Component: 100 - total flux cleaned = 0.002089 Jy ! Component: 150 - total flux cleaned = 0.00287229 Jy ! Component: 200 - total flux cleaned = 0.00361939 Jy ! Total flux subtracted in 200 components = 0.00361939 Jy ! Clean residual min=-0.001541 max=0.001298 Jy/beam ! Clean residual mean=-0.000012 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.774156 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 206 components and 0.774156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078397Jy sigma=0.000593 ! Fit after self-cal, rms=0.078380Jy sigma=0.000592 wmodel J1810+5649_X_2017_07_16_pus_map.mod ! Writing 206 model components to file: J1810+5649_X_2017_07_16_pus_map.mod wobs J1810+5649_X_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1810+5649_X_2017_07_16_pus_uvs.fits wwins J1810+5649_X_2017_07_16_pus_map.win ! wwins: Wrote 9 windows to J1810+5649_X_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000543731 Jy ! Component: 100 - total flux cleaned = -0.00083382 Jy ! Component: 150 - total flux cleaned = -0.000969216 Jy ! Component: 200 - total flux cleaned = -0.00114274 Jy ! Component: 250 - total flux cleaned = -0.00122617 Jy ! Component: 300 - total flux cleaned = -0.00122675 Jy ! Component: 350 - total flux cleaned = -0.00130625 Jy ! Component: 400 - total flux cleaned = -0.00128743 Jy ! Component: 450 - total flux cleaned = -0.00126903 Jy ! Component: 500 - total flux cleaned = -0.00136026 Jy ! Component: 550 - total flux cleaned = -0.00143148 Jy ! Component: 600 - total flux cleaned = -0.00146643 Jy ! Component: 650 - total flux cleaned = -0.00153486 Jy ! Component: 700 - total flux cleaned = -0.00158506 Jy ! Component: 750 - total flux cleaned = -0.00161789 Jy ! Component: 800 - total flux cleaned = -0.00169881 Jy ! Component: 850 - total flux cleaned = -0.00171482 Jy ! Component: 900 - total flux cleaned = -0.00182424 Jy ! Component: 950 - total flux cleaned = -0.00188566 Jy ! Component: 1000 - total flux cleaned = -0.00199192 Jy ! Component: 1050 - total flux cleaned = -0.00203684 Jy ! Component: 1100 - total flux cleaned = -0.00212539 Jy ! Component: 1150 - total flux cleaned = -0.00215471 Jy ! Component: 1200 - total flux cleaned = -0.0022697 Jy ! Component: 1250 - total flux cleaned = -0.00226973 Jy ! Component: 1300 - total flux cleaned = -0.00226983 Jy ! Component: 1350 - total flux cleaned = -0.00232504 Jy ! Component: 1400 - total flux cleaned = -0.00237965 Jy ! Component: 1450 - total flux cleaned = -0.00237991 Jy ! Component: 1500 - total flux cleaned = -0.00250005 Jy ! Component: 1550 - total flux cleaned = -0.00253949 Jy ! Component: 1600 - total flux cleaned = -0.00259175 Jy ! Component: 1650 - total flux cleaned = -0.0026436 Jy ! Component: 1700 - total flux cleaned = -0.00270781 Jy ! Component: 1750 - total flux cleaned = -0.00275835 Jy ! Component: 1800 - total flux cleaned = -0.002771 Jy ! Component: 1850 - total flux cleaned = -0.00287021 Jy ! Component: 1900 - total flux cleaned = -0.00287029 Jy ! Component: 1950 - total flux cleaned = -0.00296768 Jy ! Component: 2000 - total flux cleaned = -0.00300405 Jy ! Total flux subtracted in 2048 components = -0.00308763 Jy ! Clean residual min=-0.000599 max=0.000595 Jy/beam ! Clean residual mean=-0.000008 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.771068 Jy keep ! Adding 162 model components to the UV plane model. ! The established model now contains 368 components and 0.771069 Jy ![Exited script file: muppet] wmap "J1810+5649_X_2017_07_16_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.024 x 1.181 at -12.41 degrees (North through East) ! Clean map min=-0.0011109 max=0.52534 Jy/beam ! Writing clean map to FITS file: J1810+5649_X_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.525336 invert ! Inverting map ! Your choice of large map pixels excluded 0.156% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214506 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.122496 0.122496 0.244993 0.489986 0.979971 1.95994 3.91988 7.83977 15.6795 31.3591 62.7182 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.525 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.024 x 1.181 at -12.41 degrees (North through East) ! Clean map min=-0.0011109 max=0.52534 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1810+5649_X_2017_07_16_pus_uvs.log closed on Thu May 9 14:08:38 2019