! Started logfile: J1809-4552_S_2017_08_12_pus_uvs.log on Fri May 10 15:05:04 2019 obs J1809-4552_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1809-4552_S_2017_08_12_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.317949 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1809-4552 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1809-4552_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.691909Jy sigma=0.003877 ! Fit after self-cal, rms=0.676470Jy sigma=0.003799 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.118 mas, bmaj=6.772 mas, bpa=-1.839 degrees ! Estimated noise=6688.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.250422 Jy ! Component: 100 - total flux cleaned = 0.322648 Jy ! Total flux subtracted in 100 components = 0.322648 Jy ! Clean residual min=-0.027954 max=0.034715 Jy/beam ! Clean residual mean=-0.000907 rms=0.009638 Jy/beam ! Combined flux in latest and established models = 0.322648 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.322648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137781Jy sigma=0.000774 ! Fit after self-cal, rms=0.137743Jy sigma=0.000774 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.365 mas, bmaj=7.233 mas, bpa=-2.596 degrees ! Estimated noise=6213.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0534286 Jy ! Component: 100 - total flux cleaned = 0.0832915 Jy ! Component: 150 - total flux cleaned = 0.100267 Jy ! Component: 200 - total flux cleaned = 0.109922 Jy ! Total flux subtracted in 200 components = 0.109922 Jy ! Clean residual min=-0.017498 max=0.020083 Jy/beam ! Clean residual mean=-0.000104 rms=0.005372 Jy/beam ! Combined flux in latest and established models = 0.432571 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.432571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116029Jy sigma=0.000647 ! Fit after self-cal, rms=0.115931Jy sigma=0.000646 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.03 ! LA 0.99 MK 1.04 NL 1.00* OV 0.94 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.97 ! LA 0.99 MK 0.99 NL 1.00* OV 1.00 ! PT 0.95 SC 1.11 ! ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.115931Jy sigma=0.000646 ! Fit after self-cal, rms=0.116170Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.56 mas, bmaj=7.392 mas, bpa=-2.442 degrees ! Estimated noise=6476.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000324297 Jy ! Component: 100 - total flux cleaned = 0.000244659 Jy ! Component: 150 - total flux cleaned = 0.000167878 Jy ! Component: 200 - total flux cleaned = 9.87635e-05 Jy ! Total flux subtracted in 200 components = 9.87635e-05 Jy ! Clean residual min=-0.017332 max=0.022637 Jy/beam ! Clean residual mean=0.000006 rms=0.005587 Jy/beam ! Combined flux in latest and established models = 0.432669 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.432669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116073Jy sigma=0.000647 ! Fit after self-cal, rms=0.116099Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116099Jy sigma=0.000647 ! Fit after self-cal, rms=0.116000Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=7.39 mas, bpa=-2.458 degrees ! Estimated noise=6471.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332498 Jy ! Component: 100 - total flux cleaned = 0.000329511 Jy ! Component: 150 - total flux cleaned = 0.00026017 Jy ! Component: 200 - total flux cleaned = 0.000261128 Jy ! Total flux subtracted in 200 components = 0.000261128 Jy ! Clean residual min=-0.017174 max=0.022530 Jy/beam ! Clean residual mean=0.000009 rms=0.005536 Jy/beam ! Combined flux in latest and established models = 0.432931 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 43 components and 0.432931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115929Jy sigma=0.000646 ! Fit after self-cal, rms=0.115914Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.43747e-05 Jy ! Component: 100 - total flux cleaned = -0.000150146 Jy ! Component: 150 - total flux cleaned = -0.000151139 Jy ! Component: 200 - total flux cleaned = -0.000211117 Jy ! Total flux subtracted in 200 components = -0.000211117 Jy ! Clean residual min=-0.017112 max=0.022370 Jy/beam ! Clean residual mean=0.000007 rms=0.005501 Jy/beam ! Combined flux in latest and established models = 0.432719 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 43 components and 0.432719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115857Jy sigma=0.000646 ! Fit after self-cal, rms=0.115846Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115846Jy sigma=0.000646 ! Fit after self-cal, rms=0.115743Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.557 mas, bmaj=7.388 mas, bpa=-2.483 degrees ! Estimated noise=6466.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000242157 Jy ! Component: 100 - total flux cleaned = 0.000181463 Jy ! Component: 150 - total flux cleaned = 0.000179937 Jy ! Component: 200 - total flux cleaned = 0.000179621 Jy ! Total flux subtracted in 200 components = 0.000179621 Jy ! Clean residual min=-0.017017 max=0.022261 Jy/beam ! Clean residual mean=0.000009 rms=0.005467 Jy/beam ! Combined flux in latest and established models = 0.432899 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 43 components and 0.432899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115694Jy sigma=0.000645 ! Fit after self-cal, rms=0.115685Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131057 Jy ! Component: 100 - total flux cleaned = -0.000130277 Jy ! Component: 150 - total flux cleaned = -0.000182861 Jy ! Component: 200 - total flux cleaned = -0.000183659 Jy ! Total flux subtracted in 200 components = -0.000183659 Jy ! Clean residual min=-0.016975 max=0.022126 Jy/beam ! Clean residual mean=0.000007 rms=0.005441 Jy/beam ! Combined flux in latest and established models = 0.432715 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.432715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115646Jy sigma=0.000645 ! Fit after self-cal, rms=0.115639Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115639Jy sigma=0.000645 ! Fit after self-cal, rms=0.115597Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.56 mas, bmaj=27.5 mas, bpa=-5.717 degrees ! Estimated noise=9411.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000619449 Jy ! Component: 100 - total flux cleaned = 0.00061095 Jy ! Component: 150 - total flux cleaned = 0.00060682 Jy ! Component: 200 - total flux cleaned = 0.000603997 Jy ! Total flux subtracted in 200 components = 0.000603997 Jy ! Clean residual min=-0.020649 max=0.027754 Jy/beam ! Clean residual mean=0.000041 rms=0.009474 Jy/beam ! Combined flux in latest and established models = 0.433319 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 44 components and 0.433319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115611Jy sigma=0.000645 ! Fit after self-cal, rms=0.115561Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000147428 Jy ! Component: 100 - total flux cleaned = -0.000151077 Jy ! Component: 150 - total flux cleaned = -0.000155411 Jy ! Component: 200 - total flux cleaned = -0.000160893 Jy ! Total flux subtracted in 200 components = -0.000160893 Jy ! Clean residual min=-0.020567 max=0.027660 Jy/beam ! Clean residual mean=0.000037 rms=0.009462 Jy/beam ! Combined flux in latest and established models = 0.433158 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.433159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115581Jy sigma=0.000645 ! Fit after self-cal, rms=0.115557Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.557 mas, bmaj=7.386 mas, bpa=-2.52 degrees ! Estimated noise=6464.7 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.557 x 7.386 at -2.52 degrees (North through East) ! Clean map min=-0.016432 max=0.34062 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.275 mas, bmaj=6.649 mas, bpa=-1.696 degrees ! Estimated noise=6918.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.251512 Jy ! Component: 100 - total flux cleaned = 0.321256 Jy ! Component: 150 - total flux cleaned = 0.360799 Jy ! Component: 200 - total flux cleaned = 0.385718 Jy ! Total flux subtracted in 200 components = 0.385718 Jy ! Clean residual min=-0.021838 max=0.022161 Jy/beam ! Clean residual mean=-0.000377 rms=0.006196 Jy/beam ! Combined flux in latest and established models = 0.385718 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.385718 Jy ! Inverting map and beam ! Estimated beam: bmin=2.557 mas, bmaj=7.386 mas, bpa=-2.52 degrees ! Estimated noise=6464.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228283 Jy ! Component: 100 - total flux cleaned = 0.0348987 Jy ! Component: 150 - total flux cleaned = 0.0413306 Jy ! Component: 200 - total flux cleaned = 0.0438881 Jy ! Total flux subtracted in 200 components = 0.0438881 Jy ! Clean residual min=-0.017587 max=0.022517 Jy/beam ! Clean residual mean=-0.000033 rms=0.005630 Jy/beam ! Combined flux in latest and established models = 0.429607 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 45 components and 0.429607 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.56 mas, bmaj=27.5 mas, bpa=-5.717 degrees ! Estimated noise=9411.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352149 Jy ! Component: 100 - total flux cleaned = 0.00355795 Jy ! Component: 150 - total flux cleaned = 0.00357905 Jy ! Component: 200 - total flux cleaned = 0.00359285 Jy ! Total flux subtracted in 200 components = 0.00359285 Jy ! Clean residual min=-0.021421 max=0.028391 Jy/beam ! Clean residual mean=0.000038 rms=0.009647 Jy/beam ! Combined flux in latest and established models = 0.433199 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.04412e-05 Jy ! Component: 100 - total flux cleaned = 1.58444e-05 Jy ! Component: 150 - total flux cleaned = 1.93125e-05 Jy ! Component: 200 - total flux cleaned = 2.21149e-05 Jy ! Total flux subtracted in 200 components = 2.21149e-05 Jy ! Clean residual min=-0.020783 max=0.027780 Jy/beam ! Clean residual mean=0.000039 rms=0.009476 Jy/beam ! Combined flux in latest and established models = 0.433222 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 45 components and 0.433222 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.557 mas, bmaj=7.386 mas, bpa=-2.52 degrees ! Estimated noise=6464.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131785 Jy ! Component: 100 - total flux cleaned = -0.00109762 Jy ! Component: 150 - total flux cleaned = -0.000940319 Jy ! Component: 200 - total flux cleaned = -0.000876716 Jy ! Total flux subtracted in 200 components = -0.000876716 Jy ! Clean residual min=-0.016581 max=0.022201 Jy/beam ! Clean residual mean=0.000003 rms=0.005418 Jy/beam ! Combined flux in latest and established models = 0.432345 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.432345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115578Jy sigma=0.000645 ! Fit after self-cal, rms=0.115549Jy sigma=0.000645 wmodel J1809-4552_S_2017_08_12_pus_map.mod ! Writing 51 model components to file: J1809-4552_S_2017_08_12_pus_map.mod wobs J1809-4552_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1809-4552_S_2017_08_12_pus_uvs.fits wwins J1809-4552_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J1809-4552_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00923705 Jy ! Component: 100 - total flux cleaned = 0.0115046 Jy ! Component: 150 - total flux cleaned = 0.0133246 Jy ! Component: 200 - total flux cleaned = 0.0144466 Jy ! Component: 250 - total flux cleaned = 0.0143194 Jy ! Component: 300 - total flux cleaned = 0.0133656 Jy ! Component: 350 - total flux cleaned = 0.0122746 Jy ! Component: 400 - total flux cleaned = 0.0119331 Jy ! Component: 450 - total flux cleaned = 0.0114069 Jy ! Component: 500 - total flux cleaned = 0.0113057 Jy ! Component: 550 - total flux cleaned = 0.0117771 Jy ! Component: 600 - total flux cleaned = 0.0123203 Jy ! Component: 650 - total flux cleaned = 0.0126686 Jy ! Component: 700 - total flux cleaned = 0.0129201 Jy ! Component: 750 - total flux cleaned = 0.0131632 Jy ! Component: 800 - total flux cleaned = 0.0135598 Jy ! Component: 850 - total flux cleaned = 0.0138683 Jy ! Component: 900 - total flux cleaned = 0.0141712 Jy ! Component: 950 - total flux cleaned = 0.0144694 Jy ! Component: 1000 - total flux cleaned = 0.014691 Jy ! Component: 1050 - total flux cleaned = 0.0149817 Jy ! Component: 1100 - total flux cleaned = 0.0152682 Jy ! Component: 1150 - total flux cleaned = 0.0152675 Jy ! Component: 1200 - total flux cleaned = 0.0152672 Jy ! Component: 1250 - total flux cleaned = 0.0152685 Jy ! Component: 1300 - total flux cleaned = 0.0149826 Jy ! Component: 1350 - total flux cleaned = 0.0147657 Jy ! Component: 1400 - total flux cleaned = 0.0145463 Jy ! Component: 1450 - total flux cleaned = 0.0142511 Jy ! Component: 1500 - total flux cleaned = 0.0139523 Jy ! Component: 1550 - total flux cleaned = 0.0135743 Jy ! Component: 1600 - total flux cleaned = 0.0131118 Jy ! Component: 1650 - total flux cleaned = 0.0128767 Jy ! Component: 1700 - total flux cleaned = 0.0124783 Jy ! Component: 1750 - total flux cleaned = 0.0122351 Jy ! Component: 1800 - total flux cleaned = 0.0119857 Jy ! Component: 1850 - total flux cleaned = 0.0118152 Jy ! Component: 1900 - total flux cleaned = 0.0117289 Jy ! Component: 1950 - total flux cleaned = 0.0115488 Jy ! Component: 2000 - total flux cleaned = 0.0113622 Jy ! Component: 2050 - total flux cleaned = 0.0112658 Jy ! Component: 2100 - total flux cleaned = 0.0110667 Jy ! Component: 2150 - total flux cleaned = 0.0111683 Jy ! Component: 2200 - total flux cleaned = 0.0110636 Jy ! Component: 2250 - total flux cleaned = 0.0111753 Jy ! Component: 2300 - total flux cleaned = 0.0111764 Jy ! Component: 2350 - total flux cleaned = 0.0111776 Jy ! Component: 2400 - total flux cleaned = 0.0111757 Jy ! Component: 2450 - total flux cleaned = 0.0113015 Jy ! Component: 2500 - total flux cleaned = 0.0113016 Jy ! Component: 2550 - total flux cleaned = 0.0114362 Jy ! Component: 2600 - total flux cleaned = 0.0115751 Jy ! Component: 2650 - total flux cleaned = 0.0118688 Jy ! Component: 2700 - total flux cleaned = 0.0117162 Jy ! Component: 2750 - total flux cleaned = 0.0121891 Jy ! Component: 2800 - total flux cleaned = 0.0123539 Jy ! Component: 2850 - total flux cleaned = 0.0125243 Jy ! Component: 2900 - total flux cleaned = 0.0128768 Jy ! Component: 2950 - total flux cleaned = 0.013061 Jy ! Component: 3000 - total flux cleaned = 0.01325 Jy ! Component: 3050 - total flux cleaned = 0.0134443 Jy ! Component: 3100 - total flux cleaned = 0.0138549 Jy ! Component: 3150 - total flux cleaned = 0.014071 Jy ! Component: 3200 - total flux cleaned = 0.0140681 Jy ! Component: 3250 - total flux cleaned = 0.0145291 Jy ! Component: 3300 - total flux cleaned = 0.0147666 Jy ! Component: 3350 - total flux cleaned = 0.0150156 Jy ! Component: 3400 - total flux cleaned = 0.0152773 Jy ! Component: 3450 - total flux cleaned = 0.0155418 Jy ! Component: 3500 - total flux cleaned = 0.0160991 Jy ! Component: 3550 - total flux cleaned = 0.0163896 Jy ! Component: 3600 - total flux cleaned = 0.0166926 Jy ! Component: 3650 - total flux cleaned = 0.017004 Jy ! Component: 3700 - total flux cleaned = 0.0173233 Jy ! Component: 3750 - total flux cleaned = 0.0180001 Jy ! Component: 3800 - total flux cleaned = 0.0179969 Jy ! Component: 3850 - total flux cleaned = 0.0183556 Jy ! Component: 3900 - total flux cleaned = 0.0191107 Jy ! Component: 3950 - total flux cleaned = 0.019508 Jy ! Component: 4000 - total flux cleaned = 0.0199155 Jy ! Component: 4050 - total flux cleaned = 0.0203434 Jy ! Total flux subtracted in 4096 components = 0.0207848 Jy ! Clean residual min=-0.025024 max=0.025430 Jy/beam ! Clean residual mean=-0.000144 rms=0.006972 Jy/beam ! Combined flux in latest and established models = 0.45313 Jy keep ! Adding 145 model components to the UV plane model. ! The established model now contains 196 components and 0.45313 Jy ![Exited script file: muppet] wmap "J1809-4552_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.557 x 7.386 at -2.52 degrees (North through East) ! Clean map min=-0.047115 max=0.3347 Jy/beam ! Writing clean map to FITS file: J1809-4552_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.3347 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00860585 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -7.71364 7.71364 15.4273 30.8546 61.7091 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0258 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.334 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.557 x 7.386 at -2.52 degrees (North through East) ! Clean map min=-0.047115 max=0.3347 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1809-4552_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:05:08 2019