! Started logfile: J1809-4552_S_2017_07_16_pus_uvs.log on Thu May 9 11:14:45 2019 obs J1809-4552_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1809-4552_S_2017_07_16_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.313333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1809-4552 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1809-4552_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.694261Jy sigma=0.004020 ! Fit after self-cal, rms=0.676108Jy sigma=0.003911 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.141 mas, bmaj=6.7 mas, bpa=-2.065 degrees ! Estimated noise=6866.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.248159 Jy ! Component: 100 - total flux cleaned = 0.323129 Jy ! Total flux subtracted in 100 components = 0.323129 Jy ! Clean residual min=-0.026754 max=0.036226 Jy/beam ! Clean residual mean=-0.000745 rms=0.010013 Jy/beam ! Combined flux in latest and established models = 0.323129 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.323129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134393Jy sigma=0.000774 ! Fit after self-cal, rms=0.134324Jy sigma=0.000774 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.431 mas, bmaj=7.19 mas, bpa=-0.2676 degrees ! Estimated noise=6318.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0549192 Jy ! Component: 100 - total flux cleaned = 0.0854368 Jy ! Component: 150 - total flux cleaned = 0.102548 Jy ! Component: 200 - total flux cleaned = 0.11215 Jy ! Total flux subtracted in 200 components = 0.11215 Jy ! Clean residual min=-0.014350 max=0.015713 Jy/beam ! Clean residual mean=-0.000170 rms=0.004144 Jy/beam ! Combined flux in latest and established models = 0.435279 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 23 components and 0.435279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110575Jy sigma=0.000632 ! Fit after self-cal, rms=0.110539Jy sigma=0.000632 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.99 ! LA 1.01 MK 1.06 NL 1.00* OV 0.98 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00 ! LA 0.92 MK 0.95 NL 1.00* OV 1.05 ! PT 0.98 SC 1.07 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00 ! LA 1.00* MK 1.03 NL 1.00* OV 0.94 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.110539Jy sigma=0.000632 ! Fit after self-cal, rms=0.109138Jy sigma=0.000624 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.448 mas, bmaj=7.221 mas, bpa=-0.5319 degrees ! Estimated noise=6279.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124732 Jy ! Component: 100 - total flux cleaned = 2.78269e-05 Jy ! Component: 150 - total flux cleaned = 2.82944e-05 Jy ! Component: 200 - total flux cleaned = 2.77237e-05 Jy ! Total flux subtracted in 200 components = 2.77237e-05 Jy ! Clean residual min=-0.012952 max=0.016562 Jy/beam ! Clean residual mean=-0.000015 rms=0.003824 Jy/beam ! Combined flux in latest and established models = 0.435307 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 28 components and 0.435307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109097Jy sigma=0.000624 ! Fit after self-cal, rms=0.109111Jy sigma=0.000624 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109111Jy sigma=0.000624 ! Fit after self-cal, rms=0.109012Jy sigma=0.000624 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.448 mas, bmaj=7.22 mas, bpa=-0.516 degrees ! Estimated noise=6273.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017993 Jy ! Component: 100 - total flux cleaned = -0.000136202 Jy ! Component: 150 - total flux cleaned = -4.94001e-05 Jy ! Component: 200 - total flux cleaned = -1.02488e-05 Jy ! Total flux subtracted in 200 components = -1.02488e-05 Jy ! Clean residual min=-0.012747 max=0.016478 Jy/beam ! Clean residual mean=-0.000013 rms=0.003798 Jy/beam ! Combined flux in latest and established models = 0.435297 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 30 components and 0.435297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108985Jy sigma=0.000623 ! Fit after self-cal, rms=0.108980Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (67.5, -23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114675 Jy ! Component: 100 - total flux cleaned = 0.0118001 Jy ! Component: 150 - total flux cleaned = 0.0129372 Jy ! Component: 200 - total flux cleaned = 0.0140832 Jy ! Total flux subtracted in 200 components = 0.0140832 Jy ! Clean residual min=-0.010235 max=0.009572 Jy/beam ! Clean residual mean=-0.000135 rms=0.002690 Jy/beam ! Combined flux in latest and established models = 0.44938 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.44938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107421Jy sigma=0.000615 ! Fit after self-cal, rms=0.107383Jy sigma=0.000615 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107383Jy sigma=0.000615 ! Fit after self-cal, rms=0.106796Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.447 mas, bmaj=7.218 mas, bpa=-0.5876 degrees ! Estimated noise=6246.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00068703 Jy ! Component: 100 - total flux cleaned = 0.000806763 Jy ! Component: 150 - total flux cleaned = 0.000852028 Jy ! Component: 200 - total flux cleaned = 0.000890735 Jy ! Total flux subtracted in 200 components = 0.000890735 Jy ! Clean residual min=-0.009419 max=0.009298 Jy/beam ! Clean residual mean=-0.000095 rms=0.002549 Jy/beam ! Combined flux in latest and established models = 0.450271 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.450271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106700Jy sigma=0.000614 ! Fit after self-cal, rms=0.106704Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.38747e-05 Jy ! Component: 100 - total flux cleaned = -0.000113052 Jy ! Component: 150 - total flux cleaned = -0.000112526 Jy ! Component: 200 - total flux cleaned = -0.000112885 Jy ! Total flux subtracted in 200 components = -0.000112885 Jy ! Clean residual min=-0.009369 max=0.009251 Jy/beam ! Clean residual mean=-0.000094 rms=0.002537 Jy/beam ! Combined flux in latest and established models = 0.450158 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.450158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106685Jy sigma=0.000614 ! Fit after self-cal, rms=0.106685Jy sigma=0.000614 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106685Jy sigma=0.000614 ! Fit after self-cal, rms=0.106565Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.362 mas, bmaj=26.83 mas, bpa=-4.841 degrees ! Estimated noise=9412.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.78078e-05 Jy ! Component: 100 - total flux cleaned = -0.000114652 Jy ! Component: 150 - total flux cleaned = -0.000168325 Jy ! Component: 200 - total flux cleaned = -0.000242761 Jy ! Total flux subtracted in 200 components = -0.000242761 Jy ! Clean residual min=-0.010002 max=0.011066 Jy/beam ! Clean residual mean=-0.000193 rms=0.003546 Jy/beam ! Combined flux in latest and established models = 0.449915 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 68 components and 0.449915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106564Jy sigma=0.000614 ! Fit after self-cal, rms=0.106564Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.45204e-06 Jy ! Component: 100 - total flux cleaned = 3.84618e-06 Jy ! Component: 150 - total flux cleaned = -4.40444e-05 Jy ! Component: 200 - total flux cleaned = -8.85862e-05 Jy ! Total flux subtracted in 200 components = -8.85862e-05 Jy ! Clean residual min=-0.009993 max=0.011068 Jy/beam ! Clean residual mean=-0.000192 rms=0.003537 Jy/beam ! Combined flux in latest and established models = 0.449826 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 68 components and 0.449826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106565Jy sigma=0.000614 ! Fit after self-cal, rms=0.106564Jy sigma=0.000614 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.447 mas, bmaj=7.218 mas, bpa=-0.6076 degrees ! Estimated noise=6240.87 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.447 x 7.218 at -0.6076 degrees (North through East) ! Clean map min=-0.0088576 max=0.3388 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.157 mas, bmaj=6.709 mas, bpa=-2.248 degrees ! Estimated noise=6770.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.242961 Jy ! Component: 100 - total flux cleaned = 0.315279 Jy ! Component: 150 - total flux cleaned = 0.355567 Jy ! Component: 200 - total flux cleaned = 0.381145 Jy ! Total flux subtracted in 200 components = 0.381145 Jy ! Clean residual min=-0.017998 max=0.016173 Jy/beam ! Clean residual mean=-0.000341 rms=0.005570 Jy/beam ! Combined flux in latest and established models = 0.381145 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.381145 Jy ! Inverting map and beam ! Estimated beam: bmin=2.447 mas, bmaj=7.218 mas, bpa=-0.6076 degrees ! Estimated noise=6240.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247934 Jy ! Component: 100 - total flux cleaned = 0.0400494 Jy ! Component: 150 - total flux cleaned = 0.0480946 Jy ! Component: 200 - total flux cleaned = 0.0539297 Jy ! Total flux subtracted in 200 components = 0.0539297 Jy ! Clean residual min=-0.011858 max=0.009811 Jy/beam ! Clean residual mean=-0.000209 rms=0.003024 Jy/beam ! Combined flux in latest and established models = 0.435075 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 42 components and 0.435075 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.362 mas, bmaj=26.83 mas, bpa=-4.841 degrees ! Estimated noise=9412.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00916623 Jy ! Component: 100 - total flux cleaned = 0.0121107 Jy ! Component: 150 - total flux cleaned = 0.0134265 Jy ! Component: 200 - total flux cleaned = 0.0137941 Jy ! Total flux subtracted in 200 components = 0.0137941 Jy ! Clean residual min=-0.009661 max=0.011206 Jy/beam ! Clean residual mean=-0.000222 rms=0.003535 Jy/beam ! Combined flux in latest and established models = 0.448869 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296931 Jy ! Component: 100 - total flux cleaned = 0.000567981 Jy ! Component: 150 - total flux cleaned = 0.000596624 Jy ! Component: 200 - total flux cleaned = 0.000596164 Jy ! Total flux subtracted in 200 components = 0.000596164 Jy ! Clean residual min=-0.009741 max=0.011024 Jy/beam ! Clean residual mean=-0.000203 rms=0.003517 Jy/beam ! Combined flux in latest and established models = 0.449465 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.449465 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.447 mas, bmaj=7.218 mas, bpa=-0.6076 degrees ! Estimated noise=6240.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00144501 Jy ! Component: 100 - total flux cleaned = -0.00126898 Jy ! Component: 150 - total flux cleaned = -0.000868701 Jy ! Component: 200 - total flux cleaned = -0.000526391 Jy ! Total flux subtracted in 200 components = -0.000526391 Jy ! Clean residual min=-0.010101 max=0.008930 Jy/beam ! Clean residual mean=-0.000085 rms=0.002575 Jy/beam ! Combined flux in latest and established models = 0.448939 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.448939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106653Jy sigma=0.000614 ! Fit after self-cal, rms=0.106649Jy sigma=0.000614 wmodel J1809-4552_S_2017_07_16_pus_map.mod ! Writing 62 model components to file: J1809-4552_S_2017_07_16_pus_map.mod wobs J1809-4552_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1809-4552_S_2017_07_16_pus_uvs.fits wwins J1809-4552_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J1809-4552_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101842 Jy ! Component: 100 - total flux cleaned = 0.000222116 Jy ! Component: 150 - total flux cleaned = 0.00120174 Jy ! Component: 200 - total flux cleaned = 0.00131246 Jy ! Component: 250 - total flux cleaned = 0.00141581 Jy ! Component: 300 - total flux cleaned = 0.00141186 Jy ! Component: 350 - total flux cleaned = 0.00131968 Jy ! Component: 400 - total flux cleaned = 0.00123557 Jy ! Component: 450 - total flux cleaned = 0.00115596 Jy ! Component: 500 - total flux cleaned = 0.000768232 Jy ! Component: 550 - total flux cleaned = 0.00046755 Jy ! Component: 600 - total flux cleaned = 2.79832e-05 Jy ! Component: 650 - total flux cleaned = -0.000257979 Jy ! Component: 700 - total flux cleaned = -0.000743375 Jy ! Component: 750 - total flux cleaned = -0.00108332 Jy ! Component: 800 - total flux cleaned = -0.00128309 Jy ! Component: 850 - total flux cleaned = -0.00161094 Jy ! Component: 900 - total flux cleaned = -0.00212772 Jy ! Component: 950 - total flux cleaned = -0.00251215 Jy ! Component: 1000 - total flux cleaned = -0.00289287 Jy ! Component: 1050 - total flux cleaned = -0.00339527 Jy ! Component: 1100 - total flux cleaned = -0.00401944 Jy ! Component: 1150 - total flux cleaned = -0.0045806 Jy ! Component: 1200 - total flux cleaned = -0.0052648 Jy ! Component: 1250 - total flux cleaned = -0.00570056 Jy ! Component: 1300 - total flux cleaned = -0.00608299 Jy ! Component: 1350 - total flux cleaned = -0.006281 Jy ! Component: 1400 - total flux cleaned = -0.00641847 Jy ! Component: 1450 - total flux cleaned = -0.00656132 Jy ! Component: 1500 - total flux cleaned = -0.00663648 Jy ! Component: 1550 - total flux cleaned = -0.00679159 Jy ! Component: 1600 - total flux cleaned = -0.00695578 Jy ! Component: 1650 - total flux cleaned = -0.00712835 Jy ! Component: 1700 - total flux cleaned = -0.00731029 Jy ! Component: 1750 - total flux cleaned = -0.00750305 Jy ! Component: 1800 - total flux cleaned = -0.00760315 Jy ! Component: 1850 - total flux cleaned = -0.00781543 Jy ! Component: 1900 - total flux cleaned = -0.0079264 Jy ! Component: 1950 - total flux cleaned = -0.00816313 Jy ! Component: 2000 - total flux cleaned = -0.00828929 Jy ! Component: 2050 - total flux cleaned = -0.00855142 Jy ! Component: 2100 - total flux cleaned = -0.00869354 Jy ! Component: 2150 - total flux cleaned = -0.00884351 Jy ! Component: 2200 - total flux cleaned = -0.00900304 Jy ! Component: 2250 - total flux cleaned = -0.00883704 Jy ! Component: 2300 - total flux cleaned = -0.00866088 Jy ! Component: 2350 - total flux cleaned = -0.00847425 Jy ! Component: 2400 - total flux cleaned = -0.0082758 Jy ! Component: 2450 - total flux cleaned = -0.0080644 Jy ! Component: 2500 - total flux cleaned = -0.0078425 Jy ! Component: 2550 - total flux cleaned = -0.00760369 Jy ! Component: 2600 - total flux cleaned = -0.00735031 Jy ! Component: 2650 - total flux cleaned = -0.00707936 Jy ! Component: 2700 - total flux cleaned = -0.00679357 Jy ! Component: 2750 - total flux cleaned = -0.00648624 Jy ! Component: 2800 - total flux cleaned = -0.00582401 Jy ! Component: 2850 - total flux cleaned = -0.00546464 Jy ! Component: 2900 - total flux cleaned = -0.00508168 Jy ! Component: 2950 - total flux cleaned = -0.00468663 Jy ! Component: 3000 - total flux cleaned = -0.00383361 Jy ! Component: 3050 - total flux cleaned = -0.0033751 Jy ! Component: 3100 - total flux cleaned = -0.0028797 Jy ! Component: 3150 - total flux cleaned = -0.00236766 Jy ! Component: 3200 - total flux cleaned = -0.00125751 Jy ! Component: 3250 - total flux cleaned = -0.000642745 Jy ! Component: 3300 - total flux cleaned = -1.66966e-06 Jy ! Component: 3350 - total flux cleaned = 0.00135443 Jy ! Component: 3400 - total flux cleaned = 0.0021109 Jy ! Component: 3450 - total flux cleaned = 0.00288812 Jy ! Component: 3500 - total flux cleaned = 0.00371864 Jy ! Component: 3550 - total flux cleaned = 0.00458868 Jy ! Component: 3600 - total flux cleaned = 0.00550472 Jy ! Component: 3650 - total flux cleaned = 0.00749105 Jy ! Component: 3700 - total flux cleaned = 0.008552 Jy ! Component: 3750 - total flux cleaned = 0.00966538 Jy ! Component: 3800 - total flux cleaned = 0.0121103 Jy ! Component: 3850 - total flux cleaned = 0.0134509 Jy ! Component: 3900 - total flux cleaned = 0.0148478 Jy ! Component: 3950 - total flux cleaned = 0.0162925 Jy ! Component: 4000 - total flux cleaned = 0.0178418 Jy ! Component: 4050 - total flux cleaned = 0.0211903 Jy ! Total flux subtracted in 4096 components = 0.0211916 Jy ! Clean residual min=-0.098154 max=0.105515 Jy/beam ! Clean residual mean=0.000140 rms=0.019399 Jy/beam ! Combined flux in latest and established models = 0.47013 Jy keep ! Adding 113 model components to the UV plane model. ! The established model now contains 175 components and 0.47013 Jy ![Exited script file: muppet] wmap "J1809-4552_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.447 x 7.218 at -0.6076 degrees (North through East) ! Clean map min=-0.12351 max=0.32026 Jy/beam ! Writing clean map to FITS file: J1809-4552_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.320262 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0178634 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -16.7332 16.7332 33.4665 66.9329 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0535 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.32 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.447 x 7.218 at -0.6076 degrees (North through East) ! Clean map min=-0.12351 max=0.32026 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1809-4552_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:14:49 2019