! Started logfile: J1807+2204_S_2017_05_01_pus_uvs.log on Wed May 1 18:41:47 2019 obs J1807+2204_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1807+2204_S_2017_05_01_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.781711 visibilities/baseline/integration-bin. ! Found source: J1807+2204 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 15900 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1807+2204_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 610 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.842889Jy sigma=0.030077 ! Fit after self-cal, rms=0.836314Jy sigma=0.029923 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=6.784 mas, bpa=-15.21 degrees ! Estimated noise=734.567 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0908206 Jy ! Component: 100 - total flux cleaned = 0.097617 Jy ! Total flux subtracted in 100 components = 0.097617 Jy ! Clean residual min=-0.031419 max=0.033499 Jy/beam ! Clean residual mean=0.000067 rms=0.011136 Jy/beam ! Combined flux in latest and established models = 0.097617 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.097617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120293Jy sigma=0.002860 ! Fit after self-cal, rms=0.120276Jy sigma=0.002859 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.755 mas, bmaj=7.468 mas, bpa=-9.868 degrees ! Estimated noise=524.871 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127746 Jy ! Component: 100 - total flux cleaned = 0.0104593 Jy ! Component: 150 - total flux cleaned = 0.00869683 Jy ! Component: 200 - total flux cleaned = 0.00703445 Jy ! Total flux subtracted in 200 components = 0.00703445 Jy ! Clean residual min=-0.027375 max=0.028523 Jy/beam ! Clean residual mean=0.000198 rms=0.009115 Jy/beam ! Combined flux in latest and established models = 0.104651 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 9 components and 0.104651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110417Jy sigma=0.003056 ! Fit after self-cal, rms=0.110388Jy sigma=0.003056 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.76 HN 1.14 KP 0.88 ! LA 0.79 MK 0.90 NL 0.95 OV 0.87 ! PT 0.80 SC 0.86 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.79 HN 1.19 KP 0.83 ! LA 0.73 MK 0.90 NL 1.00 OV 0.89 ! PT 0.81 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.81 HN 1.19 KP 0.84 ! LA 0.79 MK 0.92 NL 1.04 OV 0.79 ! PT 0.78 SC 0.92 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.92 HN 1.05 KP 1.00* ! LA 29.36 MK 1.25 NL 1.00* OV 1.00* ! PT 0.88 SC 1.00* ! ! ! Fit before self-cal, rms=0.110388Jy sigma=0.003056 ! Fit after self-cal, rms=2.225992Jy sigma=0.000714 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.669 mas, bmaj=7.215 mas, bpa=-5.576 degrees ! Estimated noise=534.422 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00905657 Jy ! Component: 100 - total flux cleaned = 0.0132389 Jy ! Component: 150 - total flux cleaned = 0.0135573 Jy ! Component: 200 - total flux cleaned = 0.0135607 Jy ! Total flux subtracted in 200 components = 0.0135607 Jy ! Clean residual min=-0.003341 max=0.003763 Jy/beam ! Clean residual mean=-0.000003 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.118212 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.118212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.225991Jy sigma=0.000700 ! Fit after self-cal, rms=2.226587Jy sigma=0.000692 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.226587Jy sigma=0.000692 ! Fit after self-cal, rms=2.248822Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=7.166 mas, bpa=-5.95 degrees ! Estimated noise=540.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434727 Jy ! Component: 100 - total flux cleaned = 0.00624669 Jy ! Component: 150 - total flux cleaned = 0.00649294 Jy ! Component: 200 - total flux cleaned = 0.00656491 Jy ! Total flux subtracted in 200 components = 0.00656491 Jy ! Clean residual min=-0.001900 max=0.002523 Jy/beam ! Clean residual mean=-0.000002 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.124777 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.124777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.248777Jy sigma=0.000672 ! Fit after self-cal, rms=2.248808Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18.5, -34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000803388 Jy ! Component: 100 - total flux cleaned = 0.00119619 Jy ! Component: 150 - total flux cleaned = 0.00140054 Jy ! Component: 200 - total flux cleaned = 0.00150242 Jy ! Total flux subtracted in 200 components = 0.00150242 Jy ! Clean residual min=-0.001708 max=0.002235 Jy/beam ! Clean residual mean=-0.000001 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.126279 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 39 components and 0.126279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.248796Jy sigma=0.000671 ! Fit after self-cal, rms=2.248813Jy sigma=0.000671 ! Inverting map ! Added new window around map position (-68.5, -58). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123767 Jy ! Component: 100 - total flux cleaned = 0.00134379 Jy ! Component: 150 - total flux cleaned = 0.00141992 Jy ! Component: 200 - total flux cleaned = 0.00148831 Jy ! Total flux subtracted in 200 components = 0.00148831 Jy ! Clean residual min=-0.001670 max=0.001825 Jy/beam ! Clean residual mean=-0.000001 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.127768 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 58 components and 0.127768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.248820Jy sigma=0.000670 ! Fit after self-cal, rms=2.248838Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.248838Jy sigma=0.000670 ! Fit after self-cal, rms=0.076484Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.65 mas, bmaj=7.172 mas, bpa=-6.129 degrees ! Estimated noise=542.727 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202829 Jy ! Component: 100 - total flux cleaned = 0.00259849 Jy ! Component: 150 - total flux cleaned = 0.00259496 Jy ! Component: 200 - total flux cleaned = 0.00256777 Jy ! Total flux subtracted in 200 components = 0.00256777 Jy ! Clean residual min=-0.001500 max=0.001464 Jy/beam ! Clean residual mean=-0.000005 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.130335 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 75 components and 0.130335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076421Jy sigma=0.000667 ! Fit after self-cal, rms=0.076130Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.35809e-05 Jy ! Component: 100 - total flux cleaned = 2.37293e-05 Jy ! Component: 150 - total flux cleaned = 2.4422e-05 Jy ! Component: 200 - total flux cleaned = 0.000109772 Jy ! Total flux subtracted in 200 components = 0.000109772 Jy ! Clean residual min=-0.001486 max=0.001407 Jy/beam ! Clean residual mean=-0.000005 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.130445 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 88 components and 0.130445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076115Jy sigma=0.000667 ! Fit after self-cal, rms=0.076114Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076114Jy sigma=0.000667 ! Fit after self-cal, rms=0.074074Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.719 mas, bmaj=10.61 mas, bpa=3.737 degrees ! Estimated noise=643.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107794 Jy ! Component: 100 - total flux cleaned = 0.00115367 Jy ! Component: 150 - total flux cleaned = 0.00109266 Jy ! Component: 200 - total flux cleaned = 0.00109164 Jy ! Total flux subtracted in 200 components = 0.00109164 Jy ! Clean residual min=-0.001366 max=0.001610 Jy/beam ! Clean residual mean=-0.000010 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.131537 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 96 components and 0.131537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074051Jy sigma=0.000666 ! Fit after self-cal, rms=0.074013Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.33112e-06 Jy ! Component: 100 - total flux cleaned = 4.3583e-05 Jy ! Component: 150 - total flux cleaned = 7.96484e-05 Jy ! Component: 200 - total flux cleaned = 0.00011293 Jy ! Total flux subtracted in 200 components = 0.00011293 Jy ! Clean residual min=-0.001341 max=0.001580 Jy/beam ! Clean residual mean=-0.000010 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.13165 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 106 components and 0.13165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074010Jy sigma=0.000666 ! Fit after self-cal, rms=0.074009Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=7.176 mas, bpa=-6.211 degrees ! Estimated noise=544.743 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.646 x 7.176 at -6.211 degrees (North through East) ! Clean map min=-0.0029138 max=0.135 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.042 mas, bmaj=6.46 mas, bpa=-7.574 degrees ! Estimated noise=838.248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103913 Jy ! Component: 100 - total flux cleaned = 0.126574 Jy ! Component: 150 - total flux cleaned = 0.131673 Jy ! Component: 200 - total flux cleaned = 0.132526 Jy ! Total flux subtracted in 200 components = 0.132526 Jy ! Clean residual min=-0.002713 max=0.002779 Jy/beam ! Clean residual mean=-0.000004 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.132526 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.132526 Jy ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=7.176 mas, bpa=-6.211 degrees ! Estimated noise=544.743 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, -46.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000802345 Jy ! Component: 100 - total flux cleaned = 0.00103494 Jy ! Component: 150 - total flux cleaned = 0.00103294 Jy ! Component: 200 - total flux cleaned = 0.00102902 Jy ! Total flux subtracted in 200 components = 0.00102902 Jy ! Clean residual min=-0.001896 max=0.001487 Jy/beam ! Clean residual mean=-0.000005 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.133555 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 37 components and 0.133555 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.719 mas, bmaj=10.61 mas, bpa=3.737 degrees ! Estimated noise=643.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000446178 Jy ! Component: 100 - total flux cleaned = -0.0005722 Jy ! Component: 150 - total flux cleaned = -0.000609807 Jy ! Component: 200 - total flux cleaned = -0.000644396 Jy ! Total flux subtracted in 200 components = -0.000644396 Jy ! Clean residual min=-0.001522 max=0.001656 Jy/beam ! Clean residual mean=-0.000010 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.13291 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.10447e-05 Jy ! Component: 100 - total flux cleaned = -3.07198e-05 Jy ! Component: 150 - total flux cleaned = -5.85987e-05 Jy ! Component: 200 - total flux cleaned = -8.44305e-05 Jy ! Total flux subtracted in 200 components = -8.44305e-05 Jy ! Clean residual min=-0.001439 max=0.001610 Jy/beam ! Clean residual mean=-0.000010 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.132826 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 77 components and 0.132826 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=7.176 mas, bpa=-6.211 degrees ! Estimated noise=544.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305226 Jy ! Component: 100 - total flux cleaned = 0.00050309 Jy ! Component: 150 - total flux cleaned = 0.000710488 Jy ! Component: 200 - total flux cleaned = 0.000771623 Jy ! Total flux subtracted in 200 components = 0.000771623 Jy ! Clean residual min=-0.001675 max=0.001377 Jy/beam ! Clean residual mean=-0.000006 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.133597 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 93 components and 0.133597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074020Jy sigma=0.000667 ! Fit after self-cal, rms=0.074005Jy sigma=0.000667 wmodel J1807+2204_S_2017_05_01_pus_map.mod ! Writing 93 model components to file: J1807+2204_S_2017_05_01_pus_map.mod wobs J1807+2204_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1807+2204_S_2017_05_01_pus_uvs.fits wwins J1807+2204_S_2017_05_01_pus_map.win ! wwins: Wrote 4 windows to J1807+2204_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000466556 Jy ! Component: 100 - total flux cleaned = -0.000662705 Jy ! Component: 150 - total flux cleaned = -0.000780228 Jy ! Component: 200 - total flux cleaned = -0.0008481 Jy ! Component: 250 - total flux cleaned = -0.000891788 Jy ! Component: 300 - total flux cleaned = -0.000955371 Jy ! Component: 350 - total flux cleaned = -0.00105936 Jy ! Component: 400 - total flux cleaned = -0.00124125 Jy ! Component: 450 - total flux cleaned = -0.0013004 Jy ! Component: 500 - total flux cleaned = -0.00141679 Jy ! Component: 550 - total flux cleaned = -0.00156814 Jy ! Component: 600 - total flux cleaned = -0.00164254 Jy ! Component: 650 - total flux cleaned = -0.00180638 Jy ! Component: 700 - total flux cleaned = -0.00184195 Jy ! Component: 750 - total flux cleaned = -0.00193018 Jy ! Component: 800 - total flux cleaned = -0.00205148 Jy ! Component: 850 - total flux cleaned = -0.00210249 Jy ! Component: 900 - total flux cleaned = -0.00217018 Jy ! Component: 950 - total flux cleaned = -0.00222022 Jy ! Component: 1000 - total flux cleaned = -0.00228622 Jy ! Component: 1050 - total flux cleaned = -0.0023186 Jy ! Component: 1100 - total flux cleaned = -0.00241458 Jy ! Component: 1150 - total flux cleaned = -0.0024778 Jy ! Component: 1200 - total flux cleaned = -0.00254042 Jy ! Component: 1250 - total flux cleaned = -0.00255609 Jy ! Component: 1300 - total flux cleaned = -0.00264788 Jy ! Component: 1350 - total flux cleaned = -0.00272313 Jy ! Component: 1400 - total flux cleaned = -0.00272329 Jy ! Component: 1450 - total flux cleaned = -0.00279723 Jy ! Component: 1500 - total flux cleaned = -0.00287016 Jy ! Component: 1550 - total flux cleaned = -0.00294222 Jy ! Component: 1600 - total flux cleaned = -0.00299924 Jy ! Component: 1650 - total flux cleaned = -0.00304157 Jy ! Component: 1700 - total flux cleaned = -0.00309771 Jy ! Component: 1750 - total flux cleaned = -0.00318076 Jy ! Component: 1800 - total flux cleaned = -0.00316685 Jy ! Component: 1850 - total flux cleaned = -0.00326186 Jy ! Component: 1900 - total flux cleaned = -0.00324835 Jy ! Component: 1950 - total flux cleaned = -0.00328858 Jy ! Component: 2000 - total flux cleaned = -0.0033282 Jy ! Component: 2050 - total flux cleaned = -0.00339348 Jy ! Component: 2100 - total flux cleaned = -0.00343223 Jy ! Component: 2150 - total flux cleaned = -0.00345788 Jy ! Component: 2200 - total flux cleaned = -0.00353403 Jy ! Component: 2250 - total flux cleaned = -0.00355914 Jy ! Component: 2300 - total flux cleaned = -0.00362149 Jy ! Component: 2350 - total flux cleaned = -0.00359672 Jy ! Component: 2400 - total flux cleaned = -0.00364583 Jy ! Component: 2450 - total flux cleaned = -0.00364589 Jy ! Component: 2500 - total flux cleaned = -0.00369437 Jy ! Component: 2550 - total flux cleaned = -0.00371825 Jy ! Component: 2600 - total flux cleaned = -0.00376584 Jy ! Component: 2650 - total flux cleaned = -0.00381287 Jy ! Component: 2700 - total flux cleaned = -0.0038245 Jy ! Component: 2750 - total flux cleaned = -0.00390562 Jy ! Component: 2800 - total flux cleaned = -0.00388238 Jy ! Component: 2850 - total flux cleaned = -0.00391666 Jy ! Component: 2900 - total flux cleaned = -0.00398474 Jy ! Component: 2950 - total flux cleaned = -0.00405219 Jy ! Component: 3000 - total flux cleaned = -0.0040745 Jy ! Component: 3050 - total flux cleaned = -0.00415201 Jy ! Component: 3100 - total flux cleaned = -0.00419599 Jy ! Component: 3150 - total flux cleaned = -0.00425062 Jy ! Component: 3200 - total flux cleaned = -0.00427215 Jy ! Component: 3250 - total flux cleaned = -0.00432602 Jy ! Component: 3300 - total flux cleaned = -0.00434732 Jy ! Component: 3350 - total flux cleaned = -0.00444274 Jy ! Component: 3400 - total flux cleaned = -0.00451645 Jy ! Component: 3450 - total flux cleaned = -0.00454788 Jy ! Component: 3500 - total flux cleaned = -0.00466227 Jy ! Component: 3550 - total flux cleaned = -0.00472419 Jy ! Component: 3600 - total flux cleaned = -0.00474461 Jy ! Component: 3650 - total flux cleaned = -0.00481593 Jy ! Component: 3700 - total flux cleaned = -0.0048563 Jy ! Component: 3750 - total flux cleaned = -0.0049167 Jy ! Component: 3800 - total flux cleaned = -0.00498651 Jy ! Component: 3850 - total flux cleaned = -0.00508554 Jy ! Component: 3900 - total flux cleaned = -0.00512486 Jy ! Component: 3950 - total flux cleaned = -0.00515421 Jy ! Component: 4000 - total flux cleaned = -0.0052319 Jy ! Component: 4050 - total flux cleaned = -0.00527052 Jy ! Total flux subtracted in 4096 components = -0.00535686 Jy ! Clean residual min=-0.000615 max=0.000636 Jy/beam ! Clean residual mean=-0.000003 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.128241 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 385 components and 0.128241 Jy ![Exited script file: muppet] wmap "J1807+2204_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.646 x 7.176 at -6.211 degrees (North through East) ! Clean map min=-0.0017627 max=0.13365 Jy/beam ! Writing clean map to FITS file: J1807+2204_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.133652 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000178879 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.401518 0.401518 0.803037 1.60607 3.21215 6.42429 12.8486 25.6972 51.3944 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.133 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.646 x 7.176 at -6.211 degrees (North through East) ! Clean map min=-0.0017627 max=0.13365 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1807+2204_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:41:52 2019