! Started logfile: J1807+0528_S_2017_10_21_pus_uvs.log on Sat May 11 21:03:59 2019 obs J1807+0528_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1807+0528_S_2017_10_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.764079 visibilities/baseline/integration-bin. ! Found source: J1807+0528 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 16064 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1807+0528_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 659 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.987647Jy sigma=0.009845 ! Fit after self-cal, rms=0.958288Jy sigma=0.009583 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.648 mas, bmaj=20.02 mas, bpa=-19.35 degrees ! Estimated noise=1032.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0323693 Jy ! Component: 100 - total flux cleaned = 0.0398594 Jy ! Total flux subtracted in 100 components = 0.0398594 Jy ! Clean residual min=-0.004338 max=0.004302 Jy/beam ! Clean residual mean=-0.000013 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.0398594 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0398594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078585Jy sigma=0.000696 ! Fit after self-cal, rms=0.077598Jy sigma=0.000686 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.467 mas, bmaj=19.94 mas, bpa=-19.1 degrees ! Estimated noise=635.014 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533969 Jy ! Component: 100 - total flux cleaned = 0.00800309 Jy ! Component: 150 - total flux cleaned = 0.00962096 Jy ! Component: 200 - total flux cleaned = 0.0104336 Jy ! Total flux subtracted in 200 components = 0.0104336 Jy ! Clean residual min=-0.003275 max=0.003127 Jy/beam ! Clean residual mean=-0.000015 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.050293 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 31 components and 0.050293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077051Jy sigma=0.000683 ! Fit after self-cal, rms=0.077027Jy sigma=0.000683 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00 KP 1.20 ! LA 1.07 MK 1.05 NL 0.94 OV 1.11 ! PT 0.80 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.99 KP 1.14 ! LA 1.05 MK 1.08 NL 1.06 OV 1.12 ! PT 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.97 KP 1.27 ! LA 0.85 MK 1.13 NL 1.13 OV 0.98 ! PT 0.83 ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.84 KP 1.00* ! LA 0.61 MK 0.69 NL 1.00* OV 1.00* ! PT 0.83 ! ! ! Fit before self-cal, rms=0.077027Jy sigma=0.000683 ! Fit after self-cal, rms=0.072966Jy sigma=0.000677 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=20.22 mas, bpa=-19.09 degrees ! Estimated noise=635.691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000544926 Jy ! Component: 100 - total flux cleaned = -0.000582033 Jy ! Component: 150 - total flux cleaned = -0.000554575 Jy ! Component: 200 - total flux cleaned = -0.000531056 Jy ! Total flux subtracted in 200 components = -0.000531056 Jy ! Clean residual min=-0.001855 max=0.001912 Jy/beam ! Clean residual mean=0.000009 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0497619 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.0497619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072934Jy sigma=0.000676 ! Fit after self-cal, rms=0.073150Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073150Jy sigma=0.000674 ! Fit after self-cal, rms=0.074024Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.466 mas, bmaj=20.34 mas, bpa=-19.11 degrees ! Estimated noise=640.183 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248679 Jy ! Component: 100 - total flux cleaned = -0.000411516 Jy ! Component: 150 - total flux cleaned = -0.000457563 Jy ! Component: 200 - total flux cleaned = -0.000498606 Jy ! Total flux subtracted in 200 components = -0.000498606 Jy ! Clean residual min=-0.001724 max=0.001764 Jy/beam ! Clean residual mean=0.000002 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0492633 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 67 components and 0.0492633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074004Jy sigma=0.000672 ! Fit after self-cal, rms=0.074289Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195426 Jy ! Component: 100 - total flux cleaned = 0.00014389 Jy ! Component: 150 - total flux cleaned = 9.91975e-05 Jy ! Component: 200 - total flux cleaned = 6.102e-05 Jy ! Total flux subtracted in 200 components = 6.102e-05 Jy ! Clean residual min=-0.001947 max=0.001895 Jy/beam ! Clean residual mean=-0.000001 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.0493243 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.0493243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074272Jy sigma=0.000671 ! Fit after self-cal, rms=0.074270Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074270Jy sigma=0.000671 ! Fit after self-cal, rms=0.076156Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.461 mas, bmaj=20.47 mas, bpa=-19.13 degrees ! Estimated noise=645.389 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018332 Jy ! Component: 100 - total flux cleaned = -0.000410739 Jy ! Component: 150 - total flux cleaned = -0.000460189 Jy ! Component: 200 - total flux cleaned = -0.000523482 Jy ! Total flux subtracted in 200 components = -0.000523482 Jy ! Clean residual min=-0.001830 max=0.001784 Jy/beam ! Clean residual mean=0.000002 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0488009 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 84 components and 0.0488009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076134Jy sigma=0.000671 ! Fit after self-cal, rms=0.076314Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.29861e-05 Jy ! Component: 100 - total flux cleaned = -6.3176e-05 Jy ! Component: 150 - total flux cleaned = -8.10056e-05 Jy ! Component: 200 - total flux cleaned = -8.06478e-05 Jy ! Total flux subtracted in 200 components = -8.06478e-05 Jy ! Clean residual min=-0.001833 max=0.001690 Jy/beam ! Clean residual mean=0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0487202 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 0.0487202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076302Jy sigma=0.000671 ! Fit after self-cal, rms=0.076296Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076296Jy sigma=0.000670 ! Fit after self-cal, rms=0.077570Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.336 mas, bmaj=19.9 mas, bpa=-20.76 degrees ! Estimated noise=776.409 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025481 Jy ! Component: 100 - total flux cleaned = 0.000188256 Jy ! Component: 150 - total flux cleaned = 0.000133853 Jy ! Component: 200 - total flux cleaned = 7.57343e-05 Jy ! Total flux subtracted in 200 components = 7.57343e-05 Jy ! Clean residual min=-0.002027 max=0.001929 Jy/beam ! Clean residual mean=0.000006 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0487959 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 100 components and 0.0487959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077560Jy sigma=0.000670 ! Fit after self-cal, rms=0.077691Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000132023 Jy ! Component: 100 - total flux cleaned = 2.7252e-05 Jy ! Component: 150 - total flux cleaned = -3.11496e-05 Jy ! Component: 200 - total flux cleaned = -5.65431e-05 Jy ! Total flux subtracted in 200 components = -5.65431e-05 Jy ! Clean residual min=-0.002116 max=0.001835 Jy/beam ! Clean residual mean=0.000004 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0487394 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 107 components and 0.0487394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077687Jy sigma=0.000670 ! Fit after self-cal, rms=0.077692Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=20.58 mas, bpa=-19.15 degrees ! Estimated noise=648.454 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.45 x 20.58 at -19.15 degrees (North through East) ! Clean map min=-0.0026725 max=0.043113 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.61 mas, bmaj=20.44 mas, bpa=-19.36 degrees ! Estimated noise=1047.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0335555 Jy ! Component: 100 - total flux cleaned = 0.040442 Jy ! Component: 150 - total flux cleaned = 0.0421462 Jy ! Component: 200 - total flux cleaned = 0.0435366 Jy ! Total flux subtracted in 200 components = 0.0435366 Jy ! Clean residual min=-0.003160 max=0.003065 Jy/beam ! Clean residual mean=-0.000004 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.0435366 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0435366 Jy ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=20.58 mas, bpa=-19.15 degrees ! Estimated noise=648.454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260296 Jy ! Component: 100 - total flux cleaned = 0.00329864 Jy ! Component: 150 - total flux cleaned = 0.00356828 Jy ! Component: 200 - total flux cleaned = 0.00361719 Jy ! Total flux subtracted in 200 components = 0.00361719 Jy ! Clean residual min=-0.001887 max=0.001870 Jy/beam ! Clean residual mean=-0.000002 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0471538 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 52 components and 0.0471538 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.336 mas, bmaj=19.9 mas, bpa=-20.76 degrees ! Estimated noise=776.409 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000879737 Jy ! Component: 100 - total flux cleaned = 0.00103582 Jy ! Component: 150 - total flux cleaned = 0.00112121 Jy ! Component: 200 - total flux cleaned = 0.00121271 Jy ! Total flux subtracted in 200 components = 0.00121271 Jy ! Clean residual min=-0.002185 max=0.001796 Jy/beam ! Clean residual mean=0.000002 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0483665 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.16746e-05 Jy ! Component: 100 - total flux cleaned = 0.000103235 Jy ! Component: 150 - total flux cleaned = 0.000114698 Jy ! Component: 200 - total flux cleaned = 0.000113852 Jy ! Total flux subtracted in 200 components = 0.000113852 Jy ! Clean residual min=-0.002148 max=0.001798 Jy/beam ! Clean residual mean=0.000003 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0484804 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 77 components and 0.0484804 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=20.58 mas, bpa=-19.15 degrees ! Estimated noise=648.454 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000373424 Jy ! Component: 100 - total flux cleaned = -0.000492512 Jy ! Component: 150 - total flux cleaned = -0.000570184 Jy ! Component: 200 - total flux cleaned = -0.000593118 Jy ! Total flux subtracted in 200 components = -0.000593118 Jy ! Clean residual min=-0.001759 max=0.001754 Jy/beam ! Clean residual mean=0.000000 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0478872 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 88 components and 0.0478872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077692Jy sigma=0.000670 ! Fit after self-cal, rms=0.077695Jy sigma=0.000670 wmodel J1807+0528_S_2017_10_21_pus_map.mod ! Writing 88 model components to file: J1807+0528_S_2017_10_21_pus_map.mod wobs J1807+0528_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1807+0528_S_2017_10_21_pus_uvs.fits wwins J1807+0528_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1807+0528_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.07912e-05 Jy ! Component: 100 - total flux cleaned = -0.000157553 Jy ! Component: 150 - total flux cleaned = -0.000423929 Jy ! Component: 200 - total flux cleaned = -0.000500104 Jy ! Component: 250 - total flux cleaned = -0.000572191 Jy ! Component: 300 - total flux cleaned = -0.000618258 Jy ! Component: 350 - total flux cleaned = -0.000662007 Jy ! Component: 400 - total flux cleaned = -0.000661678 Jy ! Component: 450 - total flux cleaned = -0.0006614 Jy ! Component: 500 - total flux cleaned = -0.000681037 Jy ! Component: 550 - total flux cleaned = -0.000699765 Jy ! Component: 600 - total flux cleaned = -0.000608193 Jy ! Component: 650 - total flux cleaned = -0.000625885 Jy ! Component: 700 - total flux cleaned = -0.000520974 Jy ! Component: 750 - total flux cleaned = -0.000487306 Jy ! Component: 800 - total flux cleaned = -0.000454193 Jy ! Component: 850 - total flux cleaned = -0.000421897 Jy ! Component: 900 - total flux cleaned = -0.00045362 Jy ! Component: 950 - total flux cleaned = -0.000469025 Jy ! Component: 1000 - total flux cleaned = -0.000469155 Jy ! Component: 1050 - total flux cleaned = -0.000469438 Jy ! Component: 1100 - total flux cleaned = -0.000469721 Jy ! Component: 1150 - total flux cleaned = -0.000526779 Jy ! Component: 1200 - total flux cleaned = -0.000512825 Jy ! Component: 1250 - total flux cleaned = -0.000540154 Jy ! Component: 1300 - total flux cleaned = -0.000513104 Jy ! Component: 1350 - total flux cleaned = -0.000500137 Jy ! Component: 1400 - total flux cleaned = -0.00048728 Jy ! Component: 1450 - total flux cleaned = -0.000461792 Jy ! Component: 1500 - total flux cleaned = -0.000462075 Jy ! Component: 1550 - total flux cleaned = -0.000437347 Jy ! Component: 1600 - total flux cleaned = -0.000474052 Jy ! Component: 1650 - total flux cleaned = -0.000461901 Jy ! Component: 1700 - total flux cleaned = -0.000462033 Jy ! Component: 1750 - total flux cleaned = -0.000473756 Jy ! Component: 1800 - total flux cleaned = -0.000519899 Jy ! Component: 1850 - total flux cleaned = -0.000576322 Jy ! Component: 1900 - total flux cleaned = -0.00060963 Jy ! Component: 1950 - total flux cleaned = -0.000631448 Jy ! Component: 2000 - total flux cleaned = -0.000653105 Jy ! Component: 2050 - total flux cleaned = -0.000706711 Jy ! Component: 2100 - total flux cleaned = -0.00072785 Jy ! Component: 2150 - total flux cleaned = -0.000748783 Jy ! Component: 2200 - total flux cleaned = -0.000779709 Jy ! Component: 2250 - total flux cleaned = -0.000779788 Jy ! Component: 2300 - total flux cleaned = -0.000789978 Jy ! Component: 2350 - total flux cleaned = -0.000849609 Jy ! Component: 2400 - total flux cleaned = -0.000859496 Jy ! Component: 2450 - total flux cleaned = -0.000888668 Jy ! Component: 2500 - total flux cleaned = -0.000869454 Jy ! Component: 2550 - total flux cleaned = -0.000907668 Jy ! Component: 2600 - total flux cleaned = -0.00095492 Jy ! Component: 2650 - total flux cleaned = -0.00098294 Jy ! Component: 2700 - total flux cleaned = -0.00101995 Jy ! Component: 2750 - total flux cleaned = -0.00104762 Jy ! Component: 2800 - total flux cleaned = -0.00109321 Jy ! Component: 2850 - total flux cleaned = -0.00109327 Jy ! Component: 2900 - total flux cleaned = -0.00115597 Jy ! Component: 2950 - total flux cleaned = -0.00116475 Jy ! Component: 3000 - total flux cleaned = -0.00119119 Jy ! Component: 3050 - total flux cleaned = -0.0012175 Jy ! Component: 3100 - total flux cleaned = -0.00123482 Jy ! Component: 3150 - total flux cleaned = -0.00126059 Jy ! Component: 3200 - total flux cleaned = -0.00123502 Jy ! Component: 3250 - total flux cleaned = -0.00127731 Jy ! Component: 3300 - total flux cleaned = -0.00127729 Jy ! Component: 3350 - total flux cleaned = -0.00125225 Jy ! Component: 3400 - total flux cleaned = -0.00122739 Jy ! Component: 3450 - total flux cleaned = -0.00121917 Jy ! Component: 3500 - total flux cleaned = -0.0011781 Jy ! Component: 3550 - total flux cleaned = -0.00117814 Jy ! Component: 3600 - total flux cleaned = -0.0011375 Jy ! Component: 3650 - total flux cleaned = -0.0011051 Jy ! Component: 3700 - total flux cleaned = -0.00107287 Jy ! Component: 3750 - total flux cleaned = -0.00106483 Jy ! Component: 3800 - total flux cleaned = -0.00106484 Jy ! Component: 3850 - total flux cleaned = -0.001041 Jy ! Component: 3900 - total flux cleaned = -0.00100936 Jy ! Component: 3950 - total flux cleaned = -0.00100935 Jy ! Component: 4000 - total flux cleaned = -0.000993685 Jy ! Component: 4050 - total flux cleaned = -0.00100937 Jy ! Total flux subtracted in 4096 components = -0.000993805 Jy ! Clean residual min=-0.000523 max=0.000449 Jy/beam ! Clean residual mean=0.000001 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.0468934 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 373 components and 0.0468935 Jy ![Exited script file: muppet] wmap "J1807+0528_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.45 x 20.58 at -19.15 degrees (North through East) ! Clean map min=-0.0026126 max=0.042865 Jy/beam ! Writing clean map to FITS file: J1807+0528_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0428652 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000148041 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03609 1.03609 2.07218 4.14437 8.28874 16.5775 33.1549 66.3099 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.042 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.45 x 20.58 at -19.15 degrees (North through East) ! Clean map min=-0.0026126 max=0.042865 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1807+0528_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:04:04 2019