! Started logfile: J1805-1408_S_2017_03_23_pus_uvs.log on Mon May 13 10:06:33 2019 obs J1805-1408_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1805-1408_S_2017_03_23_pus_uva.fits ! AN table 1: 217 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.814849 visibilities/baseline/integration-bin. ! Found source: J1805-1408 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 31828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1805-1408_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 405 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 262 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 272 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 965 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970489Jy sigma=0.007221 ! Fit after self-cal, rms=0.935824Jy sigma=0.006985 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=7.121 mas, bpa=-6.378 degrees ! Estimated noise=997.062 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429383 Jy ! Component: 100 - total flux cleaned = 0.0562065 Jy ! Total flux subtracted in 100 components = 0.0562065 Jy ! Clean residual min=-0.005305 max=0.010290 Jy/beam ! Clean residual mean=-0.000034 rms=0.001851 Jy/beam ! Combined flux in latest and established models = 0.0562065 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0562065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110443Jy sigma=0.000779 ! Fit after self-cal, rms=0.109909Jy sigma=0.000775 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.707 mas, bmaj=9.393 mas, bpa=-5.675 degrees ! Estimated noise=615.083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024215 Jy ! Component: 100 - total flux cleaned = 0.0375175 Jy ! Component: 150 - total flux cleaned = 0.0449742 Jy ! Component: 200 - total flux cleaned = 0.0487731 Jy ! Total flux subtracted in 200 components = 0.0487731 Jy ! Clean residual min=-0.007733 max=0.018852 Jy/beam ! Clean residual mean=-0.000052 rms=0.003479 Jy/beam ! Combined flux in latest and established models = 0.10498 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 48 components and 0.10498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104936Jy sigma=0.000730 ! Fit after self-cal, rms=0.104698Jy sigma=0.000727 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.46 FD 0.93 HN 1.92 KP 0.90 ! LA 0.78 MK 1.32 NL 1.86 OV 1.80 ! PT 0.74 SC 1.15 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.40 FD 0.95 HN 1.94 KP 0.88 ! LA 0.75 MK 1.33 NL 1.72 OV 1.77 ! PT 0.72 SC 1.22 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.03 HN 1.70 KP 0.76 ! LA 0.60 MK 1.36 NL 1.97 OV 1.41 ! PT 0.73 SC 1.30 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 0.91 HN 1.44 KP 1.00* ! LA 0.58 MK 0.84 NL 1.00* OV 1.45 ! PT 0.82 SC 1.00* ! ! ! Fit before self-cal, rms=0.104698Jy sigma=0.000727 ! Fit after self-cal, rms=0.159816Jy sigma=0.000681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.146 mas, bmaj=10.17 mas, bpa=-5.249 degrees ! Estimated noise=703.851 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741111 Jy ! Component: 100 - total flux cleaned = 0.00639948 Jy ! Component: 150 - total flux cleaned = 0.00622047 Jy ! Component: 200 - total flux cleaned = 0.00606475 Jy ! Total flux subtracted in 200 components = 0.00606475 Jy ! Clean residual min=-0.004753 max=0.008719 Jy/beam ! Clean residual mean=0.000015 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 0.111044 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 0.111044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158935Jy sigma=0.000677 ! Fit after self-cal, rms=0.161792Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161792Jy sigma=0.000670 ! Fit after self-cal, rms=0.163065Jy sigma=0.000665 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.061 mas, bmaj=9.889 mas, bpa=-4.133 degrees ! Estimated noise=704.112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428151 Jy ! Component: 100 - total flux cleaned = 0.00371923 Jy ! Component: 150 - total flux cleaned = 0.00335193 Jy ! Component: 200 - total flux cleaned = 0.00319899 Jy ! Total flux subtracted in 200 components = 0.00319899 Jy ! Clean residual min=-0.003560 max=0.005238 Jy/beam ! Clean residual mean=0.000009 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.114243 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 92 components and 0.114243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162789Jy sigma=0.000664 ! Fit after self-cal, rms=0.162620Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220603 Jy ! Component: 100 - total flux cleaned = 0.00175973 Jy ! Component: 150 - total flux cleaned = 0.00139742 Jy ! Component: 200 - total flux cleaned = 0.00114153 Jy ! Total flux subtracted in 200 components = 0.00114153 Jy ! Clean residual min=-0.003389 max=0.004412 Jy/beam ! Clean residual mean=0.000013 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.115385 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 103 components and 0.115385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162451Jy sigma=0.000663 ! Fit after self-cal, rms=0.162240Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162240Jy sigma=0.000662 ! Fit after self-cal, rms=0.152827Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.962 mas, bmaj=9.601 mas, bpa=-3.063 degrees ! Estimated noise=680.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325329 Jy ! Component: 100 - total flux cleaned = 0.00325497 Jy ! Component: 150 - total flux cleaned = 0.00312582 Jy ! Component: 200 - total flux cleaned = 0.00290616 Jy ! Total flux subtracted in 200 components = 0.00290616 Jy ! Clean residual min=-0.002881 max=0.004690 Jy/beam ! Clean residual mean=0.000005 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.118291 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 127 components and 0.118291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152711Jy sigma=0.000659 ! Fit after self-cal, rms=0.152361Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17.5, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438569 Jy ! Component: 100 - total flux cleaned = 0.00689389 Jy ! Component: 150 - total flux cleaned = 0.00739794 Jy ! Component: 200 - total flux cleaned = 0.00764123 Jy ! Total flux subtracted in 200 components = 0.00764123 Jy ! Clean residual min=-0.002953 max=0.002882 Jy/beam ! Clean residual mean=0.000013 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.125932 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 150 components and 0.125932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152166Jy sigma=0.000658 ! Fit after self-cal, rms=0.151938Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151938Jy sigma=0.000657 ! Fit after self-cal, rms=0.144032Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.434 mas, bmaj=17.86 mas, bpa=7.582 degrees ! Estimated noise=711.097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00427295 Jy ! Component: 100 - total flux cleaned = 0.00605951 Jy ! Component: 150 - total flux cleaned = 0.00594656 Jy ! Component: 200 - total flux cleaned = 0.00584072 Jy ! Total flux subtracted in 200 components = 0.00584072 Jy ! Clean residual min=-0.002755 max=0.002594 Jy/beam ! Clean residual mean=0.000009 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.131773 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 171 components and 0.131773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143952Jy sigma=0.000655 ! Fit after self-cal, rms=0.143608Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111528 Jy ! Component: 100 - total flux cleaned = 0.0010035 Jy ! Component: 150 - total flux cleaned = 0.000713652 Jy ! Component: 200 - total flux cleaned = 0.0004189 Jy ! Total flux subtracted in 200 components = 0.0004189 Jy ! Clean residual min=-0.003020 max=0.002705 Jy/beam ! Clean residual mean=0.000013 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.132192 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 177 components and 0.132192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143587Jy sigma=0.000655 ! Fit after self-cal, rms=0.143528Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.958 mas, bmaj=9.572 mas, bpa=-3.086 degrees ! Estimated noise=669.757 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.958 x 9.572 at -3.086 degrees (North through East) ! Clean map min=-0.0065985 max=0.062 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=6.98 mas, bpa=-3.901 degrees ! Estimated noise=1157.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0474496 Jy ! Component: 100 - total flux cleaned = 0.0677221 Jy ! Component: 150 - total flux cleaned = 0.0822175 Jy ! Component: 200 - total flux cleaned = 0.0933948 Jy ! Total flux subtracted in 200 components = 0.0933948 Jy ! Clean residual min=-0.006114 max=0.007243 Jy/beam ! Clean residual mean=-0.000015 rms=0.001445 Jy/beam ! Combined flux in latest and established models = 0.0933948 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0933948 Jy ! Inverting map and beam ! Estimated beam: bmin=3.958 mas, bmaj=9.572 mas, bpa=-3.086 degrees ! Estimated noise=669.757 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154116 Jy ! Component: 100 - total flux cleaned = 0.0247299 Jy ! Component: 150 - total flux cleaned = 0.0284797 Jy ! Component: 200 - total flux cleaned = 0.031028 Jy ! Total flux subtracted in 200 components = 0.031028 Jy ! Clean residual min=-0.004822 max=0.004534 Jy/beam ! Clean residual mean=0.000004 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.124423 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 75 components and 0.124423 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.434 mas, bmaj=17.86 mas, bpa=7.582 degrees ! Estimated noise=711.097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00326323 Jy ! Component: 100 - total flux cleaned = 0.00454471 Jy ! Component: 150 - total flux cleaned = 0.00526357 Jy ! Component: 200 - total flux cleaned = 0.00550788 Jy ! Total flux subtracted in 200 components = 0.00550788 Jy ! Clean residual min=-0.003648 max=0.003152 Jy/beam ! Clean residual mean=0.000013 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.129931 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206882 Jy ! Component: 100 - total flux cleaned = 0.000386395 Jy ! Component: 150 - total flux cleaned = 0.000388154 Jy ! Component: 200 - total flux cleaned = 0.000459914 Jy ! Total flux subtracted in 200 components = 0.000459914 Jy ! Clean residual min=-0.003432 max=0.002827 Jy/beam ! Clean residual mean=0.000014 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.130391 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 163 components and 0.130391 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.958 mas, bmaj=9.572 mas, bpa=-3.086 degrees ! Estimated noise=669.757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00031563 Jy ! Component: 100 - total flux cleaned = 0.000876321 Jy ! Component: 150 - total flux cleaned = 0.00108158 Jy ! Component: 200 - total flux cleaned = 0.00120815 Jy ! Total flux subtracted in 200 components = 0.00120815 Jy ! Clean residual min=-0.002758 max=0.002562 Jy/beam ! Clean residual mean=0.000010 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.131599 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 182 components and 0.131599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143601Jy sigma=0.000655 ! Fit after self-cal, rms=0.143552Jy sigma=0.000654 wmodel J1805-1408_S_2017_03_23_pus_map.mod ! Writing 182 model components to file: J1805-1408_S_2017_03_23_pus_map.mod wobs J1805-1408_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1805-1408_S_2017_03_23_pus_uvs.fits wwins J1805-1408_S_2017_03_23_pus_map.win ! wwins: Wrote 4 windows to J1805-1408_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000991708 Jy ! Component: 100 - total flux cleaned = -0.00143932 Jy ! Component: 150 - total flux cleaned = -0.00169202 Jy ! Component: 200 - total flux cleaned = -0.00205144 Jy ! Component: 250 - total flux cleaned = -0.00232003 Jy ! Component: 300 - total flux cleaned = -0.00254373 Jy ! Component: 350 - total flux cleaned = -0.00290696 Jy ! Component: 400 - total flux cleaned = -0.00311959 Jy ! Component: 450 - total flux cleaned = -0.00332878 Jy ! Component: 500 - total flux cleaned = -0.0035339 Jy ! Component: 550 - total flux cleaned = -0.00363446 Jy ! Component: 600 - total flux cleaned = -0.00370059 Jy ! Component: 650 - total flux cleaned = -0.00376642 Jy ! Component: 700 - total flux cleaned = -0.00395749 Jy ! Component: 750 - total flux cleaned = -0.00402051 Jy ! Component: 800 - total flux cleaned = -0.00414442 Jy ! Component: 850 - total flux cleaned = -0.00429714 Jy ! Component: 900 - total flux cleaned = -0.00450709 Jy ! Component: 950 - total flux cleaned = -0.00465558 Jy ! Component: 1000 - total flux cleaned = -0.00483087 Jy ! Component: 1050 - total flux cleaned = -0.0049461 Jy ! Component: 1100 - total flux cleaned = -0.0050314 Jy ! Component: 1150 - total flux cleaned = -0.00508766 Jy ! Component: 1200 - total flux cleaned = -0.0051996 Jy ! Component: 1250 - total flux cleaned = -0.00533768 Jy ! Component: 1300 - total flux cleaned = -0.00539218 Jy ! Component: 1350 - total flux cleaned = -0.00539241 Jy ! Component: 1400 - total flux cleaned = -0.00549981 Jy ! Component: 1450 - total flux cleaned = -0.00557927 Jy ! Component: 1500 - total flux cleaned = -0.00560558 Jy ! Component: 1550 - total flux cleaned = -0.00563168 Jy ! Component: 1600 - total flux cleaned = -0.00573449 Jy ! Component: 1650 - total flux cleaned = -0.00568364 Jy ! Component: 1700 - total flux cleaned = -0.00575964 Jy ! Component: 1750 - total flux cleaned = -0.00571002 Jy ! Component: 1800 - total flux cleaned = -0.00590871 Jy ! Component: 1850 - total flux cleaned = -0.00585948 Jy ! Component: 1900 - total flux cleaned = -0.00595684 Jy ! Component: 1950 - total flux cleaned = -0.00605336 Jy ! Component: 2000 - total flux cleaned = -0.00607695 Jy ! Component: 2050 - total flux cleaned = -0.00614789 Jy ! Component: 2100 - total flux cleaned = -0.00610167 Jy ! Component: 2150 - total flux cleaned = -0.00624129 Jy ! Component: 2200 - total flux cleaned = -0.00621817 Jy ! Component: 2250 - total flux cleaned = -0.00626373 Jy ! Component: 2300 - total flux cleaned = -0.00624092 Jy ! Component: 2350 - total flux cleaned = -0.00621822 Jy ! Component: 2400 - total flux cleaned = -0.00621829 Jy ! Component: 2450 - total flux cleaned = -0.00621825 Jy ! Component: 2500 - total flux cleaned = -0.00626215 Jy ! Component: 2550 - total flux cleaned = -0.00621882 Jy ! Component: 2600 - total flux cleaned = -0.00619747 Jy ! Component: 2650 - total flux cleaned = -0.00626133 Jy ! Component: 2700 - total flux cleaned = -0.00621874 Jy ! Component: 2750 - total flux cleaned = -0.00617632 Jy ! Component: 2800 - total flux cleaned = -0.00609283 Jy ! Component: 2850 - total flux cleaned = -0.00611342 Jy ! Component: 2900 - total flux cleaned = -0.00603154 Jy ! Component: 2950 - total flux cleaned = -0.00609251 Jy ! Component: 3000 - total flux cleaned = -0.00607233 Jy ! Component: 3050 - total flux cleaned = -0.00607211 Jy ! Component: 3100 - total flux cleaned = -0.00597238 Jy ! Component: 3150 - total flux cleaned = -0.00603163 Jy ! Component: 3200 - total flux cleaned = -0.00595287 Jy ! Component: 3250 - total flux cleaned = -0.0059334 Jy ! Component: 3300 - total flux cleaned = -0.00591418 Jy ! Component: 3350 - total flux cleaned = -0.00579877 Jy ! Component: 3400 - total flux cleaned = -0.00579867 Jy ! Component: 3450 - total flux cleaned = -0.00574156 Jy ! Component: 3500 - total flux cleaned = -0.00570378 Jy ! Component: 3550 - total flux cleaned = -0.00562861 Jy ! Component: 3600 - total flux cleaned = -0.00564734 Jy ! Component: 3650 - total flux cleaned = -0.00561003 Jy ! Component: 3700 - total flux cleaned = -0.00549924 Jy ! Component: 3750 - total flux cleaned = -0.00542586 Jy ! Component: 3800 - total flux cleaned = -0.00537091 Jy ! Component: 3850 - total flux cleaned = -0.00529814 Jy ! Component: 3900 - total flux cleaned = -0.00526193 Jy ! Component: 3950 - total flux cleaned = -0.00513663 Jy ! Component: 4000 - total flux cleaned = -0.00508312 Jy ! Component: 4050 - total flux cleaned = -0.00506529 Jy ! Total flux subtracted in 4096 components = -0.00508294 Jy ! Clean residual min=-0.001116 max=0.001156 Jy/beam ! Clean residual mean=0.000003 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.126516 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 450 components and 0.126516 Jy ![Exited script file: muppet] wmap "J1805-1408_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.958 x 9.572 at -3.086 degrees (North through East) ! Clean map min=-0.005174 max=0.064965 Jy/beam ! Writing clean map to FITS file: J1805-1408_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0649653 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000337883 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.56029 1.56029 3.12058 6.24116 12.4823 24.9647 49.9293 99.8586 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.958 x 9.572 at -3.086 degrees (North through East) ! Clean map min=-0.005174 max=0.064965 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1805-1408_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:06:40 2019