! Started logfile: J1805+1714_S_2017_05_01_pus_uvs.log on Wed May 1 18:41:43 2019 obs J1805+1714_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1805+1714_S_2017_05_01_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.832664 visibilities/baseline/integration-bin. ! Found source: J1805+1714 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 12440 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1805+1714_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 435 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.030159Jy sigma=0.007873 ! Fit after self-cal, rms=1.021320Jy sigma=0.007812 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=6.301 mas, bpa=-6.77 degrees ! Estimated noise=1133.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0986785 Jy ! Component: 100 - total flux cleaned = 0.120589 Jy ! Total flux subtracted in 100 components = 0.120589 Jy ! Clean residual min=-0.007594 max=0.008426 Jy/beam ! Clean residual mean=-0.000035 rms=0.001931 Jy/beam ! Combined flux in latest and established models = 0.120589 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.120589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.600695Jy sigma=0.000769 ! Fit after self-cal, rms=0.600691Jy sigma=0.000769 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=7.114 mas, bpa=-5.927 degrees ! Estimated noise=818.094 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00661077 Jy ! Component: 100 - total flux cleaned = 0.0076431 Jy ! Component: 150 - total flux cleaned = 0.00764111 Jy ! Component: 200 - total flux cleaned = 0.00771728 Jy ! Total flux subtracted in 200 components = 0.00771728 Jy ! Clean residual min=-0.008672 max=0.009683 Jy/beam ! Clean residual mean=-0.000078 rms=0.002332 Jy/beam ! Combined flux in latest and established models = 0.128306 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.128306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.600065Jy sigma=0.000768 ! Fit after self-cal, rms=0.600063Jy sigma=0.000768 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.83 HN 0.98 KP 0.98 ! LA 0.96 MK 0.97 NL 0.93 OV 0.98 ! PT 1.77 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.89 HN 1.03 KP 0.93 ! LA 0.87 MK 0.96 NL 1.04 OV 0.99 ! PT 1.81 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.99 KP 0.95 ! LA 0.95 MK 0.97 NL 1.10 OV 0.92 ! PT 1.72 SC 1.02 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.90 KP 1.00* ! LA 0.41 MK 1.08 NL 1.00* OV 1.00* ! PT 1.54 SC 1.00* ! ! ! Fit before self-cal, rms=0.600063Jy sigma=0.000768 ! Fit after self-cal, rms=0.508843Jy sigma=0.000730 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=7.049 mas, bpa=-5.8 degrees ! Estimated noise=832.239 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359223 Jy ! Component: 100 - total flux cleaned = 0.00567417 Jy ! Component: 150 - total flux cleaned = 0.00700252 Jy ! Component: 200 - total flux cleaned = 0.00738955 Jy ! Total flux subtracted in 200 components = 0.00738955 Jy ! Clean residual min=-0.008005 max=0.006498 Jy/beam ! Clean residual mean=-0.000080 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 0.135696 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 42 components and 0.135696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.508481Jy sigma=0.000730 ! Fit after self-cal, rms=0.508497Jy sigma=0.000729 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.508497Jy sigma=0.000729 ! Fit after self-cal, rms=0.450187Jy sigma=0.000696 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=6.944 mas, bpa=-5.815 degrees ! Estimated noise=875.871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608846 Jy ! Component: 100 - total flux cleaned = 0.0089236 Jy ! Component: 150 - total flux cleaned = 0.0107953 Jy ! Component: 200 - total flux cleaned = 0.0120972 Jy ! Total flux subtracted in 200 components = 0.0120972 Jy ! Clean residual min=-0.005759 max=0.003625 Jy/beam ! Clean residual mean=-0.000029 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.147793 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 68 components and 0.147793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.449509Jy sigma=0.000696 ! Fit after self-cal, rms=0.449688Jy sigma=0.000695 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104124 Jy ! Component: 100 - total flux cleaned = 0.00171374 Jy ! Component: 150 - total flux cleaned = 0.00217186 Jy ! Component: 200 - total flux cleaned = 0.00239455 Jy ! Total flux subtracted in 200 components = 0.00239455 Jy ! Clean residual min=-0.005802 max=0.003718 Jy/beam ! Clean residual mean=-0.000029 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.150188 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.150188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.449596Jy sigma=0.000695 ! Fit after self-cal, rms=0.449605Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.449605Jy sigma=0.000695 ! Fit after self-cal, rms=0.293765Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=6.943 mas, bpa=-5.894 degrees ! Estimated noise=891.516 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163708 Jy ! Component: 100 - total flux cleaned = 0.00176682 Jy ! Component: 150 - total flux cleaned = 0.00179528 Jy ! Component: 200 - total flux cleaned = 0.00181404 Jy ! Total flux subtracted in 200 components = 0.00181404 Jy ! Clean residual min=-0.003155 max=0.002682 Jy/beam ! Clean residual mean=0.000004 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.152002 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.152002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293645Jy sigma=0.000683 ! Fit after self-cal, rms=0.293648Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.15323e-05 Jy ! Component: 100 - total flux cleaned = -0.000100603 Jy ! Component: 150 - total flux cleaned = -0.000122621 Jy ! Component: 200 - total flux cleaned = -0.00014283 Jy ! Total flux subtracted in 200 components = -0.00014283 Jy ! Clean residual min=-0.003206 max=0.002672 Jy/beam ! Clean residual mean=0.000003 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.151859 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 92 components and 0.151859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293644Jy sigma=0.000682 ! Fit after self-cal, rms=0.293645Jy sigma=0.000682 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293645Jy sigma=0.000682 ! Fit after self-cal, rms=0.296708Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.239 mas, bmaj=9.843 mas, bpa=-0.145 degrees ! Estimated noise=1162.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214069 Jy ! Component: 100 - total flux cleaned = 0.00252147 Jy ! Component: 150 - total flux cleaned = 0.00256626 Jy ! Component: 200 - total flux cleaned = 0.00256666 Jy ! Total flux subtracted in 200 components = 0.00256666 Jy ! Clean residual min=-0.004423 max=0.003872 Jy/beam ! Clean residual mean=0.000008 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.154425 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.154426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296573Jy sigma=0.000682 ! Fit after self-cal, rms=0.296574Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.17757e-05 Jy ! Component: 100 - total flux cleaned = 4.45112e-05 Jy ! Component: 150 - total flux cleaned = 3.52209e-05 Jy ! Component: 200 - total flux cleaned = 3.53872e-05 Jy ! Total flux subtracted in 200 components = 3.53872e-05 Jy ! Clean residual min=-0.004437 max=0.003875 Jy/beam ! Clean residual mean=0.000008 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.154461 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 103 components and 0.154461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296569Jy sigma=0.000682 ! Fit after self-cal, rms=0.296569Jy sigma=0.000682 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=6.937 mas, bpa=-5.949 degrees ! Estimated noise=904.942 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.338 x 6.937 at -5.949 degrees (North through East) ! Clean map min=-0.0030769 max=0.13635 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=6.191 mas, bpa=-6.739 degrees ! Estimated noise=1215.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105575 Jy ! Component: 100 - total flux cleaned = 0.13017 Jy ! Component: 150 - total flux cleaned = 0.139958 Jy ! Component: 200 - total flux cleaned = 0.144802 Jy ! Total flux subtracted in 200 components = 0.144802 Jy ! Clean residual min=-0.003413 max=0.003351 Jy/beam ! Clean residual mean=-0.000003 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.144801 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.144801 Jy ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=6.937 mas, bpa=-5.949 degrees ! Estimated noise=904.942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040684 Jy ! Component: 100 - total flux cleaned = 0.00591481 Jy ! Component: 150 - total flux cleaned = 0.00703366 Jy ! Component: 200 - total flux cleaned = 0.00773202 Jy ! Total flux subtracted in 200 components = 0.00773202 Jy ! Clean residual min=-0.003135 max=0.002687 Jy/beam ! Clean residual mean=0.000002 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.152534 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 48 components and 0.152534 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.239 mas, bmaj=9.843 mas, bpa=-0.145 degrees ! Estimated noise=1162.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134436 Jy ! Component: 100 - total flux cleaned = 0.00169015 Jy ! Component: 150 - total flux cleaned = 0.00182186 Jy ! Component: 200 - total flux cleaned = 0.0018523 Jy ! Total flux subtracted in 200 components = 0.0018523 Jy ! Clean residual min=-0.004463 max=0.003907 Jy/beam ! Clean residual mean=0.000008 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.154386 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.386e-05 Jy ! Component: 100 - total flux cleaned = 3.80787e-05 Jy ! Component: 150 - total flux cleaned = 7.07614e-05 Jy ! Component: 200 - total flux cleaned = 9.09233e-05 Jy ! Total flux subtracted in 200 components = 9.09233e-05 Jy ! Clean residual min=-0.004440 max=0.003899 Jy/beam ! Clean residual mean=0.000008 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.154477 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 93 components and 0.154477 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=6.937 mas, bpa=-5.949 degrees ! Estimated noise=904.942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375203 Jy ! Component: 100 - total flux cleaned = -0.000374662 Jy ! Component: 150 - total flux cleaned = -0.000401013 Jy ! Component: 200 - total flux cleaned = -0.000401189 Jy ! Total flux subtracted in 200 components = -0.000401189 Jy ! Clean residual min=-0.003059 max=0.002581 Jy/beam ! Clean residual mean=0.000004 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.154076 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 104 components and 0.154076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296512Jy sigma=0.000682 ! Fit after self-cal, rms=0.296508Jy sigma=0.000682 wmodel J1805+1714_S_2017_05_01_pus_map.mod ! Writing 104 model components to file: J1805+1714_S_2017_05_01_pus_map.mod wobs J1805+1714_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1805+1714_S_2017_05_01_pus_uvs.fits wwins J1805+1714_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J1805+1714_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000953117 Jy ! Component: 100 - total flux cleaned = -0.00134531 Jy ! Component: 150 - total flux cleaned = -0.00171367 Jy ! Component: 200 - total flux cleaned = -0.00193275 Jy ! Component: 250 - total flux cleaned = -0.00214739 Jy ! Component: 300 - total flux cleaned = -0.00239707 Jy ! Component: 350 - total flux cleaned = -0.0025584 Jy ! Component: 400 - total flux cleaned = -0.00271624 Jy ! Component: 450 - total flux cleaned = -0.00298651 Jy ! Component: 500 - total flux cleaned = -0.00302449 Jy ! Component: 550 - total flux cleaned = -0.00317335 Jy ! Component: 600 - total flux cleaned = -0.00320975 Jy ! Component: 650 - total flux cleaned = -0.00317387 Jy ! Component: 700 - total flux cleaned = -0.00313904 Jy ! Component: 750 - total flux cleaned = -0.00313933 Jy ! Component: 800 - total flux cleaned = -0.00307052 Jy ! Component: 850 - total flux cleaned = -0.00293554 Jy ! Component: 900 - total flux cleaned = -0.00293528 Jy ! Component: 950 - total flux cleaned = -0.00283652 Jy ! Component: 1000 - total flux cleaned = -0.00277188 Jy ! Component: 1050 - total flux cleaned = -0.00267584 Jy ! Component: 1100 - total flux cleaned = -0.00258068 Jy ! Component: 1150 - total flux cleaned = -0.00251857 Jy ! Component: 1200 - total flux cleaned = -0.00251833 Jy ! Component: 1250 - total flux cleaned = -0.00242642 Jy ! Component: 1300 - total flux cleaned = -0.00239605 Jy ! Component: 1350 - total flux cleaned = -0.00227708 Jy ! Component: 1400 - total flux cleaned = -0.00233614 Jy ! Component: 1450 - total flux cleaned = -0.00221977 Jy ! Component: 1500 - total flux cleaned = -0.00221973 Jy ! Component: 1550 - total flux cleaned = -0.0021345 Jy ! Component: 1600 - total flux cleaned = -0.00219125 Jy ! Component: 1650 - total flux cleaned = -0.00207994 Jy ! Component: 1700 - total flux cleaned = -0.00205236 Jy ! Component: 1750 - total flux cleaned = -0.00205235 Jy ! Component: 1800 - total flux cleaned = -0.00194422 Jy ! Component: 1850 - total flux cleaned = -0.00191716 Jy ! Component: 1900 - total flux cleaned = -0.00189041 Jy ! Component: 1950 - total flux cleaned = -0.00178568 Jy ! Component: 2000 - total flux cleaned = -0.00183749 Jy ! Component: 2050 - total flux cleaned = -0.00178625 Jy ! Component: 2100 - total flux cleaned = -0.00181177 Jy ! Component: 2150 - total flux cleaned = -0.00168497 Jy ! Component: 2200 - total flux cleaned = -0.00171014 Jy ! Component: 2250 - total flux cleaned = -0.00171006 Jy ! Component: 2300 - total flux cleaned = -0.00168521 Jy ! Component: 2350 - total flux cleaned = -0.00161192 Jy ! Component: 2400 - total flux cleaned = -0.00156327 Jy ! Component: 2450 - total flux cleaned = -0.0015152 Jy ! Component: 2500 - total flux cleaned = -0.00141983 Jy ! Component: 2550 - total flux cleaned = -0.00134904 Jy ! Component: 2600 - total flux cleaned = -0.00134915 Jy ! Component: 2650 - total flux cleaned = -0.00130251 Jy ! Component: 2700 - total flux cleaned = -0.00125628 Jy ! Component: 2750 - total flux cleaned = -0.00121089 Jy ! Component: 2800 - total flux cleaned = -0.00118832 Jy ! Component: 2850 - total flux cleaned = -0.00107574 Jy ! Component: 2900 - total flux cleaned = -0.00105332 Jy ! Component: 2950 - total flux cleaned = -0.00100889 Jy ! Component: 3000 - total flux cleaned = -0.000942765 Jy ! Component: 3050 - total flux cleaned = -0.000898984 Jy ! Component: 3100 - total flux cleaned = -0.00085555 Jy ! Component: 3150 - total flux cleaned = -0.000790768 Jy ! Component: 3200 - total flux cleaned = -0.000769132 Jy ! Component: 3250 - total flux cleaned = -0.000726423 Jy ! Component: 3300 - total flux cleaned = -0.000747446 Jy ! Component: 3350 - total flux cleaned = -0.000663279 Jy ! Component: 3400 - total flux cleaned = -0.000746843 Jy ! Component: 3450 - total flux cleaned = -0.00066398 Jy ! Component: 3500 - total flux cleaned = -0.000704998 Jy ! Component: 3550 - total flux cleaned = -0.000684574 Jy ! Component: 3600 - total flux cleaned = -0.000704985 Jy ! Component: 3650 - total flux cleaned = -0.000684927 Jy ! Component: 3700 - total flux cleaned = -0.00066477 Jy ! Component: 3750 - total flux cleaned = -0.000645021 Jy ! Component: 3800 - total flux cleaned = -0.00062509 Jy ! Component: 3850 - total flux cleaned = -0.000664476 Jy ! Component: 3900 - total flux cleaned = -0.000703558 Jy ! Component: 3950 - total flux cleaned = -0.000664692 Jy ! Component: 4000 - total flux cleaned = -0.000703283 Jy ! Component: 4050 - total flux cleaned = -0.000684251 Jy ! Total flux subtracted in 4096 components = -0.000703201 Jy ! Clean residual min=-0.000979 max=0.001225 Jy/beam ! Clean residual mean=0.000003 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.153372 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 420 components and 0.153372 Jy ![Exited script file: muppet] wmap "J1805+1714_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.338 x 6.937 at -5.949 degrees (North through East) ! Clean map min=-0.0024799 max=0.13665 Jy/beam ! Writing clean map to FITS file: J1805+1714_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.136647 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000351617 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.771954 0.771954 1.54391 3.08782 6.17563 12.3513 24.7025 49.4051 98.8101 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.136 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.338 x 6.937 at -5.949 degrees (North through East) ! Clean map min=-0.0024799 max=0.13665 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1805+1714_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:41:47 2019