! Started logfile: J1803-0433_S_2017_07_09_pus_uvs.log on Wed May 8 14:55:17 2019 obs J1803-0433_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1803-0433_S_2017_07_09_pus_uva.fits ! AN table 1: 217 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.881516 visibilities/baseline/integration-bin. ! Found source: J1803-0433 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 34432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1803-0433_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 198 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 272 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 272 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1343 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.969556Jy sigma=0.008299 ! Fit after self-cal, rms=0.947408Jy sigma=0.008123 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.866 mas, bmaj=7.359 mas, bpa=-0.6532 degrees ! Estimated noise=1109.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418905 Jy ! Component: 100 - total flux cleaned = 0.0517898 Jy ! Total flux subtracted in 100 components = 0.0517898 Jy ! Clean residual min=-0.002911 max=0.004034 Jy/beam ! Clean residual mean=-0.000004 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.0517898 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0517898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081258Jy sigma=0.000666 ! Fit after self-cal, rms=0.081062Jy sigma=0.000664 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.515 mas, bmaj=8.594 mas, bpa=1.127 degrees ! Estimated noise=535.906 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00594314 Jy ! Component: 100 - total flux cleaned = 0.00860181 Jy ! Component: 150 - total flux cleaned = 0.009926 Jy ! Component: 200 - total flux cleaned = 0.010665 Jy ! Total flux subtracted in 200 components = 0.010665 Jy ! Clean residual min=-0.001638 max=0.001994 Jy/beam ! Clean residual mean=-0.000009 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0624547 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 29 components and 0.0624547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080652Jy sigma=0.000661 ! Fit after self-cal, rms=0.080641Jy sigma=0.000661 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.02 KP 1.08 ! LA 1.03 MK 0.98 NL 0.89 OV 1.02 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.03 KP 0.97 ! LA 1.00 MK 1.24 NL 1.08 OV 1.01 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.99 HN 0.95 KP 0.96 ! LA 1.01 MK 1.07 NL 1.05 OV 1.01 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 4. ! A total of 186 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 0.84 KP 1.00* ! LA 0.86 MK 0.83 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.080641Jy sigma=0.000661 ! Fit after self-cal, rms=0.081253Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=8.608 mas, bpa=1.338 degrees ! Estimated noise=540.487 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581721 Jy ! Component: 100 - total flux cleaned = 0.000675597 Jy ! Component: 150 - total flux cleaned = 0.000717041 Jy ! Component: 200 - total flux cleaned = 0.000743256 Jy ! Total flux subtracted in 200 components = 0.000743256 Jy ! Clean residual min=-0.001511 max=0.001831 Jy/beam ! Clean residual mean=-0.000010 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.063198 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 32 components and 0.063198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081245Jy sigma=0.000660 ! Fit after self-cal, rms=0.081248Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081248Jy sigma=0.000660 ! Fit after self-cal, rms=0.081227Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=8.603 mas, bpa=1.369 degrees ! Estimated noise=541.746 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0003131 Jy ! Component: 100 - total flux cleaned = 0.000347354 Jy ! Component: 150 - total flux cleaned = 0.000389222 Jy ! Component: 200 - total flux cleaned = 0.000427843 Jy ! Total flux subtracted in 200 components = 0.000427843 Jy ! Clean residual min=-0.001425 max=0.001748 Jy/beam ! Clean residual mean=-0.000007 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0636259 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.0636258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081224Jy sigma=0.000660 ! Fit after self-cal, rms=0.081225Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-78.5, 69.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112747 Jy ! Component: 100 - total flux cleaned = 0.00112181 Jy ! Component: 150 - total flux cleaned = 0.00116807 Jy ! Component: 200 - total flux cleaned = 0.00115075 Jy ! Total flux subtracted in 200 components = 0.00115075 Jy ! Clean residual min=-0.001353 max=0.001473 Jy/beam ! Clean residual mean=-0.000007 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0647766 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 0.0647766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081196Jy sigma=0.000659 ! Fit after self-cal, rms=0.081188Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081188Jy sigma=0.000659 ! Fit after self-cal, rms=0.080609Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.536 mas, bmaj=8.571 mas, bpa=1.284 degrees ! Estimated noise=542.032 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466407 Jy ! Component: 100 - total flux cleaned = 0.000383135 Jy ! Component: 150 - total flux cleaned = 0.000315208 Jy ! Component: 200 - total flux cleaned = 0.000314789 Jy ! Total flux subtracted in 200 components = 0.000314789 Jy ! Clean residual min=-0.001457 max=0.001435 Jy/beam ! Clean residual mean=-0.000004 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.0650914 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 64 components and 0.0650914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080597Jy sigma=0.000658 ! Fit after self-cal, rms=0.080606Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019036 Jy ! Component: 100 - total flux cleaned = 0.000130815 Jy ! Component: 150 - total flux cleaned = 9.22414e-05 Jy ! Component: 200 - total flux cleaned = 0.000103532 Jy ! Total flux subtracted in 200 components = 0.000103532 Jy ! Clean residual min=-0.001405 max=0.001400 Jy/beam ! Clean residual mean=-0.000005 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0651949 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 72 components and 0.0651949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080600Jy sigma=0.000658 ! Fit after self-cal, rms=0.080599Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080599Jy sigma=0.000658 ! Fit after self-cal, rms=0.080657Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.688 mas, bmaj=13.95 mas, bpa=-0.9853 degrees ! Estimated noise=659.326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000393595 Jy ! Component: 100 - total flux cleaned = 0.000415757 Jy ! Component: 150 - total flux cleaned = 0.000365739 Jy ! Component: 200 - total flux cleaned = 0.00029766 Jy ! Total flux subtracted in 200 components = 0.00029766 Jy ! Clean residual min=-0.001481 max=0.001849 Jy/beam ! Clean residual mean=-0.000007 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.0654926 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 84 components and 0.0654926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080656Jy sigma=0.000658 ! Fit after self-cal, rms=0.080661Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.74555e-05 Jy ! Component: 100 - total flux cleaned = -2.04848e-05 Jy ! Component: 150 - total flux cleaned = -6.29535e-05 Jy ! Component: 200 - total flux cleaned = -0.000101938 Jy ! Total flux subtracted in 200 components = -0.000101938 Jy ! Clean residual min=-0.001468 max=0.001806 Jy/beam ! Clean residual mean=-0.000007 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0653907 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 0.0653907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080662Jy sigma=0.000658 ! Fit after self-cal, rms=0.080662Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.531 mas, bmaj=8.556 mas, bpa=1.274 degrees ! Estimated noise=542.3 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.531 x 8.556 at 1.274 degrees (North through East) ! Clean map min=-0.0013225 max=0.054519 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.333 mas, bpa=-0.8194 degrees ! Estimated noise=1115.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.041675 Jy ! Component: 100 - total flux cleaned = 0.0520222 Jy ! Component: 150 - total flux cleaned = 0.0573126 Jy ! Component: 200 - total flux cleaned = 0.0602832 Jy ! Total flux subtracted in 200 components = 0.0602832 Jy ! Clean residual min=-0.002705 max=0.002864 Jy/beam ! Clean residual mean=-0.000004 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.0602832 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0602832 Jy ! Inverting map and beam ! Estimated beam: bmin=3.531 mas, bmaj=8.556 mas, bpa=1.274 degrees ! Estimated noise=542.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306024 Jy ! Component: 100 - total flux cleaned = 0.00404661 Jy ! Component: 150 - total flux cleaned = 0.00445981 Jy ! Component: 200 - total flux cleaned = 0.00474882 Jy ! Total flux subtracted in 200 components = 0.00474882 Jy ! Clean residual min=-0.001470 max=0.001569 Jy/beam ! Clean residual mean=-0.000004 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.065032 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 48 components and 0.065032 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.688 mas, bmaj=13.95 mas, bpa=-0.9853 degrees ! Estimated noise=659.326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293961 Jy ! Component: 100 - total flux cleaned = 0.000351128 Jy ! Component: 150 - total flux cleaned = 0.000373863 Jy ! Component: 200 - total flux cleaned = 0.000338955 Jy ! Total flux subtracted in 200 components = 0.000338955 Jy ! Clean residual min=-0.001501 max=0.001915 Jy/beam ! Clean residual mean=-0.000007 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.065371 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.63048e-05 Jy ! Component: 100 - total flux cleaned = -0.000103482 Jy ! Component: 150 - total flux cleaned = -0.000155792 Jy ! Component: 200 - total flux cleaned = -0.000191631 Jy ! Total flux subtracted in 200 components = -0.000191631 Jy ! Clean residual min=-0.001475 max=0.001851 Jy/beam ! Clean residual mean=-0.000007 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0651793 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 73 components and 0.0651793 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.531 mas, bmaj=8.556 mas, bpa=1.274 degrees ! Estimated noise=542.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175409 Jy ! Component: 100 - total flux cleaned = -0.00013355 Jy ! Component: 150 - total flux cleaned = -0.000151219 Jy ! Component: 200 - total flux cleaned = -0.000152041 Jy ! Total flux subtracted in 200 components = -0.000152041 Jy ! Clean residual min=-0.001363 max=0.001454 Jy/beam ! Clean residual mean=-0.000004 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0650273 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 93 components and 0.0650273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080667Jy sigma=0.000658 ! Fit after self-cal, rms=0.080664Jy sigma=0.000658 wmodel J1803-0433_S_2017_07_09_pus_map.mod ! Writing 93 model components to file: J1803-0433_S_2017_07_09_pus_map.mod wobs J1803-0433_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1803-0433_S_2017_07_09_pus_uvs.fits wwins J1803-0433_S_2017_07_09_pus_map.win ! wwins: Wrote 2 windows to J1803-0433_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000322361 Jy ! Component: 100 - total flux cleaned = 0.000516457 Jy ! Component: 150 - total flux cleaned = 0.000631087 Jy ! Component: 200 - total flux cleaned = 0.000652539 Jy ! Component: 250 - total flux cleaned = 0.000757481 Jy ! Component: 300 - total flux cleaned = 0.000818476 Jy ! Component: 350 - total flux cleaned = 0.000818257 Jy ! Component: 400 - total flux cleaned = 0.000818045 Jy ! Component: 450 - total flux cleaned = 0.000799534 Jy ! Component: 500 - total flux cleaned = 0.000762407 Jy ! Component: 550 - total flux cleaned = 0.000708357 Jy ! Component: 600 - total flux cleaned = 0.000672546 Jy ! Component: 650 - total flux cleaned = 0.000654425 Jy ! Component: 700 - total flux cleaned = 0.000551226 Jy ! Component: 750 - total flux cleaned = 0.000450522 Jy ! Component: 800 - total flux cleaned = 0.00041777 Jy ! Component: 850 - total flux cleaned = 0.000320212 Jy ! Component: 900 - total flux cleaned = 0.000288482 Jy ! Component: 950 - total flux cleaned = 0.000193726 Jy ! Component: 1000 - total flux cleaned = 0.000100234 Jy ! Component: 1050 - total flux cleaned = 5.40022e-05 Jy ! Component: 1100 - total flux cleaned = -2.21793e-05 Jy ! Component: 1150 - total flux cleaned = -6.75279e-05 Jy ! Component: 1200 - total flux cleaned = -0.000141718 Jy ! Component: 1250 - total flux cleaned = -0.000258845 Jy ! Component: 1300 - total flux cleaned = -0.000359559 Jy ! Component: 1350 - total flux cleaned = -0.000387871 Jy ! Component: 1400 - total flux cleaned = -0.000486406 Jy ! Component: 1450 - total flux cleaned = -0.000583549 Jy ! Component: 1500 - total flux cleaned = -0.000720377 Jy ! Component: 1550 - total flux cleaned = -0.000787749 Jy ! Component: 1600 - total flux cleaned = -0.000880943 Jy ! Component: 1650 - total flux cleaned = -0.000933744 Jy ! Component: 1700 - total flux cleaned = -0.0010382 Jy ! Component: 1750 - total flux cleaned = -0.00111554 Jy ! Component: 1800 - total flux cleaned = -0.00119202 Jy ! Component: 1850 - total flux cleaned = -0.00122998 Jy ! Component: 1900 - total flux cleaned = -0.00130504 Jy ! Component: 1950 - total flux cleaned = -0.00137914 Jy ! Component: 2000 - total flux cleaned = -0.00146461 Jy ! Component: 2050 - total flux cleaned = -0.00152496 Jy ! Component: 2100 - total flux cleaned = -0.00157293 Jy ! Component: 2150 - total flux cleaned = -0.00169117 Jy ! Component: 2200 - total flux cleaned = -0.00177302 Jy ! Component: 2250 - total flux cleaned = -0.00183099 Jy ! Component: 2300 - total flux cleaned = -0.0019113 Jy ! Component: 2350 - total flux cleaned = -0.00196788 Jy ! Component: 2400 - total flux cleaned = -0.00197922 Jy ! Component: 2450 - total flux cleaned = -0.00200169 Jy ! Component: 2500 - total flux cleaned = -0.00205684 Jy ! Component: 2550 - total flux cleaned = -0.00210058 Jy ! Component: 2600 - total flux cleaned = -0.00214375 Jy ! Component: 2650 - total flux cleaned = -0.0021756 Jy ! Component: 2700 - total flux cleaned = -0.00218634 Jy ! Component: 2750 - total flux cleaned = -0.0022494 Jy ! Component: 2800 - total flux cleaned = -0.00232211 Jy ! Component: 2850 - total flux cleaned = -0.00233214 Jy ! Component: 2900 - total flux cleaned = -0.00236271 Jy ! Component: 2950 - total flux cleaned = -0.00236292 Jy ! Component: 3000 - total flux cleaned = -0.00243334 Jy ! Component: 3050 - total flux cleaned = -0.00245333 Jy ! Component: 3100 - total flux cleaned = -0.00254205 Jy ! Component: 3150 - total flux cleaned = -0.00257132 Jy ! Component: 3200 - total flux cleaned = -0.00259071 Jy ! Component: 3250 - total flux cleaned = -0.00262917 Jy ! Component: 3300 - total flux cleaned = -0.00268641 Jy ! Component: 3350 - total flux cleaned = -0.00273358 Jy ! Component: 3400 - total flux cleaned = -0.00276176 Jy ! Component: 3450 - total flux cleaned = -0.00283626 Jy ! Component: 3500 - total flux cleaned = -0.00285463 Jy ! Component: 3550 - total flux cleaned = -0.00290955 Jy ! Component: 3600 - total flux cleaned = -0.00294593 Jy ! Component: 3650 - total flux cleaned = -0.00301806 Jy ! Component: 3700 - total flux cleaned = -0.00302694 Jy ! Component: 3750 - total flux cleaned = -0.00307126 Jy ! Component: 3800 - total flux cleaned = -0.00313299 Jy ! Component: 3850 - total flux cleaned = -0.00316786 Jy ! Component: 3900 - total flux cleaned = -0.00321995 Jy ! Component: 3950 - total flux cleaned = -0.00326299 Jy ! Component: 4000 - total flux cleaned = -0.00329709 Jy ! Component: 4050 - total flux cleaned = -0.00333939 Jy ! Total flux subtracted in 4096 components = -0.00335627 Jy ! Clean residual min=-0.000573 max=0.000492 Jy/beam ! Clean residual mean=-0.000001 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.061671 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 387 components and 0.0616711 Jy ![Exited script file: muppet] wmap "J1803-0433_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.531 x 8.556 at 1.274 degrees (North through East) ! Clean map min=-0.0011121 max=0.054745 Jy/beam ! Writing clean map to FITS file: J1803-0433_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0547455 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000158071 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.866217 0.866217 1.73243 3.46487 6.92973 13.8595 27.7189 55.4379 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.531 x 8.556 at 1.274 degrees (North through East) ! Clean map min=-0.0011121 max=0.054745 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1803-0433_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:55:22 2019