! Started logfile: J1803+0934_S_2017_08_12_pus_uvs.log on Fri May 10 15:04:55 2019 obs J1803+0934_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1803+0934_S_2017_08_12_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.683069 visibilities/baseline/integration-bin. ! Found source: J1803+0934 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 10328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1803+0934_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 732 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938861Jy sigma=0.008211 ! Fit after self-cal, rms=0.922855Jy sigma=0.008102 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=6.653 mas, bpa=-3.502 degrees ! Estimated noise=1417.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.060934 Jy ! Component: 100 - total flux cleaned = 0.0760323 Jy ! Total flux subtracted in 100 components = 0.0760323 Jy ! Clean residual min=-0.004916 max=0.006311 Jy/beam ! Clean residual mean=-0.000010 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.0760323 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0760323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081331Jy sigma=0.000665 ! Fit after self-cal, rms=0.081304Jy sigma=0.000665 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.939 mas, bmaj=7.41 mas, bpa=-4.043 degrees ! Estimated noise=989.551 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00866096 Jy ! Component: 100 - total flux cleaned = 0.0125274 Jy ! Component: 150 - total flux cleaned = 0.0144139 Jy ! Component: 200 - total flux cleaned = 0.015292 Jy ! Total flux subtracted in 200 components = 0.015292 Jy ! Clean residual min=-0.002933 max=0.002403 Jy/beam ! Clean residual mean=0.000005 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.0913243 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.0913243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080501Jy sigma=0.000657 ! Fit after self-cal, rms=0.080513Jy sigma=0.000657 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.02 KP 1.03 ! LA 0.98 MK 1.00 NL 0.94 OV 0.98 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.96 KP 1.19 ! LA 0.99 MK 1.02 NL 1.06 OV 1.04 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 0.96 ! LA 0.94 MK 1.00 NL 0.93 OV 0.99 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.080513Jy sigma=0.000657 ! Fit after self-cal, rms=0.080862Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.398 mas, bpa=-3.413 degrees ! Estimated noise=993.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000343623 Jy ! Component: 100 - total flux cleaned = 0.000187399 Jy ! Component: 150 - total flux cleaned = 0.000186964 Jy ! Component: 200 - total flux cleaned = 0.000185583 Jy ! Total flux subtracted in 200 components = 0.000185583 Jy ! Clean residual min=-0.002978 max=0.002534 Jy/beam ! Clean residual mean=0.000004 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.0915099 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.0915099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080845Jy sigma=0.000657 ! Fit after self-cal, rms=0.080881Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080881Jy sigma=0.000657 ! Fit after self-cal, rms=0.081012Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.388 mas, bpa=-3.451 degrees ! Estimated noise=993.835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000456472 Jy ! Component: 100 - total flux cleaned = 0.000477064 Jy ! Component: 150 - total flux cleaned = 0.000458755 Jy ! Component: 200 - total flux cleaned = 0.000441876 Jy ! Total flux subtracted in 200 components = 0.000441876 Jy ! Clean residual min=-0.002862 max=0.002354 Jy/beam ! Clean residual mean=-0.000000 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0919518 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.0919518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081001Jy sigma=0.000656 ! Fit after self-cal, rms=0.081034Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.52838e-05 Jy ! Component: 100 - total flux cleaned = 2.57742e-05 Jy ! Component: 150 - total flux cleaned = -4.33099e-06 Jy ! Component: 200 - total flux cleaned = -1.82459e-05 Jy ! Total flux subtracted in 200 components = -1.82459e-05 Jy ! Clean residual min=-0.002891 max=0.002349 Jy/beam ! Clean residual mean=-0.000000 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.0919335 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.0919335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081028Jy sigma=0.000656 ! Fit after self-cal, rms=0.081028Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081028Jy sigma=0.000656 ! Fit after self-cal, rms=0.082872Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=7.384 mas, bpa=-3.413 degrees ! Estimated noise=992.222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271655 Jy ! Component: 100 - total flux cleaned = 0.00025606 Jy ! Component: 150 - total flux cleaned = 0.000271721 Jy ! Component: 200 - total flux cleaned = 0.000286444 Jy ! Total flux subtracted in 200 components = 0.000286444 Jy ! Clean residual min=-0.002674 max=0.002389 Jy/beam ! Clean residual mean=0.000000 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.09222 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.09222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082865Jy sigma=0.000653 ! Fit after self-cal, rms=0.082919Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.79049e-05 Jy ! Component: 100 - total flux cleaned = 8.31043e-05 Jy ! Component: 150 - total flux cleaned = 7.01782e-05 Jy ! Component: 200 - total flux cleaned = 8.25622e-05 Jy ! Total flux subtracted in 200 components = 8.25622e-05 Jy ! Clean residual min=-0.002629 max=0.002363 Jy/beam ! Clean residual mean=0.000001 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0923025 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.0923025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082915Jy sigma=0.000653 ! Fit after self-cal, rms=0.082908Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082908Jy sigma=0.000653 ! Fit after self-cal, rms=0.083008Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.871 mas, bmaj=12.15 mas, bpa=-8.599 degrees ! Estimated noise=1293.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000869403 Jy ! Component: 100 - total flux cleaned = 0.000872564 Jy ! Component: 150 - total flux cleaned = 0.000870004 Jy ! Component: 200 - total flux cleaned = 0.000891843 Jy ! Total flux subtracted in 200 components = 0.000891843 Jy ! Clean residual min=-0.002905 max=0.002185 Jy/beam ! Clean residual mean=0.000002 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.0931944 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.0931944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083019Jy sigma=0.000653 ! Fit after self-cal, rms=0.083021Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000220667 Jy ! Component: 100 - total flux cleaned = 0.000209406 Jy ! Component: 150 - total flux cleaned = 0.000189827 Jy ! Component: 200 - total flux cleaned = 0.000175265 Jy ! Total flux subtracted in 200 components = 0.000175265 Jy ! Clean residual min=-0.002870 max=0.002187 Jy/beam ! Clean residual mean=0.000002 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0933696 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.0933696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083036Jy sigma=0.000653 ! Fit after self-cal, rms=0.083036Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.376 mas, bpa=-3.402 degrees ! Estimated noise=991.286 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.959 x 7.376 at -3.402 degrees (North through East) ! Clean map min=-0.0024398 max=0.079848 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.61 mas, bmaj=6.716 mas, bpa=-2.244 degrees ! Estimated noise=1352.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0604099 Jy ! Component: 100 - total flux cleaned = 0.0767014 Jy ! Component: 150 - total flux cleaned = 0.084272 Jy ! Component: 200 - total flux cleaned = 0.0880735 Jy ! Total flux subtracted in 200 components = 0.0880735 Jy ! Clean residual min=-0.004255 max=0.003845 Jy/beam ! Clean residual mean=-0.000003 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.0880735 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0880735 Jy ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.376 mas, bpa=-3.402 degrees ! Estimated noise=991.286 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257721 Jy ! Component: 100 - total flux cleaned = 0.00388675 Jy ! Component: 150 - total flux cleaned = 0.0040567 Jy ! Component: 200 - total flux cleaned = 0.00405838 Jy ! Total flux subtracted in 200 components = 0.00405838 Jy ! Clean residual min=-0.002705 max=0.002428 Jy/beam ! Clean residual mean=0.000000 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.0921318 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.0921319 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.871 mas, bmaj=12.15 mas, bpa=-8.599 degrees ! Estimated noise=1293.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000921674 Jy ! Component: 100 - total flux cleaned = 0.00100086 Jy ! Component: 150 - total flux cleaned = 0.00106233 Jy ! Component: 200 - total flux cleaned = 0.00111062 Jy ! Total flux subtracted in 200 components = 0.00111062 Jy ! Clean residual min=-0.002875 max=0.002185 Jy/beam ! Clean residual mean=0.000002 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.0932425 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.76947e-05 Jy ! Component: 100 - total flux cleaned = 3.8519e-05 Jy ! Component: 150 - total flux cleaned = 3.89609e-05 Jy ! Component: 200 - total flux cleaned = 3.92253e-05 Jy ! Total flux subtracted in 200 components = 3.92253e-05 Jy ! Clean residual min=-0.002867 max=0.002187 Jy/beam ! Clean residual mean=0.000002 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0932817 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.0932817 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.376 mas, bpa=-3.402 degrees ! Estimated noise=991.286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000671619 Jy ! Component: 100 - total flux cleaned = -0.00062242 Jy ! Component: 150 - total flux cleaned = -0.00069087 Jy ! Component: 200 - total flux cleaned = -0.00076329 Jy ! Total flux subtracted in 200 components = -0.00076329 Jy ! Clean residual min=-0.002636 max=0.002426 Jy/beam ! Clean residual mean=0.000001 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0925184 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.0925184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083024Jy sigma=0.000653 ! Fit after self-cal, rms=0.083015Jy sigma=0.000653 wmodel J1803+0934_S_2017_08_12_pus_map.mod ! Writing 46 model components to file: J1803+0934_S_2017_08_12_pus_map.mod wobs J1803+0934_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1803+0934_S_2017_08_12_pus_uvs.fits wwins J1803+0934_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J1803+0934_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011799 Jy ! Component: 100 - total flux cleaned = -0.00180026 Jy ! Component: 150 - total flux cleaned = -0.00225123 Jy ! Component: 200 - total flux cleaned = -0.00248474 Jy ! Component: 250 - total flux cleaned = -0.00278072 Jy ! Component: 300 - total flux cleaned = -0.00302918 Jy ! Component: 350 - total flux cleaned = -0.0032337 Jy ! Component: 400 - total flux cleaned = -0.00326545 Jy ! Component: 450 - total flux cleaned = -0.00326543 Jy ! Component: 500 - total flux cleaned = -0.00323326 Jy ! Component: 550 - total flux cleaned = -0.00317092 Jy ! Component: 600 - total flux cleaned = -0.00311051 Jy ! Component: 650 - total flux cleaned = -0.00316953 Jy ! Component: 700 - total flux cleaned = -0.00322677 Jy ! Component: 750 - total flux cleaned = -0.00322686 Jy ! Component: 800 - total flux cleaned = -0.00328233 Jy ! Component: 850 - total flux cleaned = -0.00333737 Jy ! Component: 900 - total flux cleaned = -0.00331116 Jy ! Component: 950 - total flux cleaned = -0.00341698 Jy ! Component: 1000 - total flux cleaned = -0.00341648 Jy ! Component: 1050 - total flux cleaned = -0.00331421 Jy ! Component: 1100 - total flux cleaned = -0.00328923 Jy ! Component: 1150 - total flux cleaned = -0.00326478 Jy ! Component: 1200 - total flux cleaned = -0.00321608 Jy ! Component: 1250 - total flux cleaned = -0.00326418 Jy ! Component: 1300 - total flux cleaned = -0.00326423 Jy ! Component: 1350 - total flux cleaned = -0.00324107 Jy ! Component: 1400 - total flux cleaned = -0.00328747 Jy ! Component: 1450 - total flux cleaned = -0.00333261 Jy ! Component: 1500 - total flux cleaned = -0.00319694 Jy ! Component: 1550 - total flux cleaned = -0.00315265 Jy ! Component: 1600 - total flux cleaned = -0.00310875 Jy ! Component: 1650 - total flux cleaned = -0.00310884 Jy ! Component: 1700 - total flux cleaned = -0.00304436 Jy ! Component: 1750 - total flux cleaned = -0.00300223 Jy ! Component: 1800 - total flux cleaned = -0.00308625 Jy ! Component: 1850 - total flux cleaned = -0.00308584 Jy ! Component: 1900 - total flux cleaned = -0.00298254 Jy ! Component: 1950 - total flux cleaned = -0.00290104 Jy ! Component: 2000 - total flux cleaned = -0.00290086 Jy ! Component: 2050 - total flux cleaned = -0.00276122 Jy ! Component: 2100 - total flux cleaned = -0.00280061 Jy ! Component: 2150 - total flux cleaned = -0.00272213 Jy ! Component: 2200 - total flux cleaned = -0.00260569 Jy ! Component: 2250 - total flux cleaned = -0.00258659 Jy ! Component: 2300 - total flux cleaned = -0.00264373 Jy ! Component: 2350 - total flux cleaned = -0.00262491 Jy ! Component: 2400 - total flux cleaned = -0.00256888 Jy ! Component: 2450 - total flux cleaned = -0.002569 Jy ! Component: 2500 - total flux cleaned = -0.00262381 Jy ! Component: 2550 - total flux cleaned = -0.00258727 Jy ! Component: 2600 - total flux cleaned = -0.00256897 Jy ! Component: 2650 - total flux cleaned = -0.00253304 Jy ! Component: 2700 - total flux cleaned = -0.00258624 Jy ! Component: 2750 - total flux cleaned = -0.00251575 Jy ! Component: 2800 - total flux cleaned = -0.00255075 Jy ! Component: 2850 - total flux cleaned = -0.00248139 Jy ! Component: 2900 - total flux cleaned = -0.00253293 Jy ! Component: 2950 - total flux cleaned = -0.00254977 Jy ! Component: 3000 - total flux cleaned = -0.00254982 Jy ! Component: 3050 - total flux cleaned = -0.00256669 Jy ! Component: 3100 - total flux cleaned = -0.00258324 Jy ! Component: 3150 - total flux cleaned = -0.00263283 Jy ! Component: 3200 - total flux cleaned = -0.00266556 Jy ! Component: 3250 - total flux cleaned = -0.00264929 Jy ! Component: 3300 - total flux cleaned = -0.00274637 Jy ! Component: 3350 - total flux cleaned = -0.00274625 Jy ! Component: 3400 - total flux cleaned = -0.00277783 Jy ! Component: 3450 - total flux cleaned = -0.00280942 Jy ! Component: 3500 - total flux cleaned = -0.00276223 Jy ! Component: 3550 - total flux cleaned = -0.00284034 Jy ! Component: 3600 - total flux cleaned = -0.00287111 Jy ! Component: 3650 - total flux cleaned = -0.00287121 Jy ! Component: 3700 - total flux cleaned = -0.00296284 Jy ! Component: 3750 - total flux cleaned = -0.00296275 Jy ! Component: 3800 - total flux cleaned = -0.00296279 Jy ! Component: 3850 - total flux cleaned = -0.0029477 Jy ! Component: 3900 - total flux cleaned = -0.00299229 Jy ! Component: 3950 - total flux cleaned = -0.0029776 Jy ! Component: 4000 - total flux cleaned = -0.00303613 Jy ! Component: 4050 - total flux cleaned = -0.00300695 Jy ! Total flux subtracted in 4096 components = -0.0030505 Jy ! Clean residual min=-0.000986 max=0.001061 Jy/beam ! Clean residual mean=-0.000001 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.0894679 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 323 components and 0.089468 Jy ![Exited script file: muppet] wmap "J1803+0934_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.959 x 7.376 at -3.402 degrees (North through East) ! Clean map min=-0.0018125 max=0.079377 Jy/beam ! Writing clean map to FITS file: J1803+0934_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0793767 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00025713 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.971808 0.971808 1.94362 3.88723 7.77447 15.5489 31.0979 62.1957 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.959 x 7.376 at -3.402 degrees (North through East) ! Clean map min=-0.0018125 max=0.079377 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1803+0934_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:04:59 2019