! Started logfile: J1803+0341_S_2017_08_12_pus_uvs.log on Fri May 10 15:04:51 2019 obs J1803+0341_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1803+0341_S_2017_08_12_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.684337 visibilities/baseline/integration-bin. ! Found source: J1803+0341 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 10224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1803+0341_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 637 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.859691Jy sigma=0.007143 ! Fit after self-cal, rms=0.850529Jy sigma=0.007078 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.583 mas, bmaj=6.709 mas, bpa=-3.991 degrees ! Estimated noise=1323.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113096 Jy ! Component: 100 - total flux cleaned = 0.140319 Jy ! Total flux subtracted in 100 components = 0.140319 Jy ! Clean residual min=-0.008440 max=0.011573 Jy/beam ! Clean residual mean=-0.000043 rms=0.002119 Jy/beam ! Combined flux in latest and established models = 0.140319 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.140319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092031Jy sigma=0.000714 ! Fit after self-cal, rms=0.092034Jy sigma=0.000714 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=7.361 mas, bpa=-2.863 degrees ! Estimated noise=1024.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194174 Jy ! Component: 100 - total flux cleaned = 0.0297263 Jy ! Component: 150 - total flux cleaned = 0.035934 Jy ! Component: 200 - total flux cleaned = 0.0398398 Jy ! Total flux subtracted in 200 components = 0.0398398 Jy ! Clean residual min=-0.005026 max=0.005803 Jy/beam ! Clean residual mean=-0.000084 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.180159 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 49 components and 0.180159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088090Jy sigma=0.000676 ! Fit after self-cal, rms=0.088090Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.00 KP 1.05 ! LA 1.01 MK 1.03 NL 0.88 OV 1.04 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 1.04 ! LA 0.94 MK 1.02 NL 1.01 OV 1.05 ! PT 0.93 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.02 KP 1.00 ! LA 0.96 MK 1.06 NL 0.96 OV 0.97 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.97 KP 1.00* ! LA 0.96 MK 1.04 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.088090Jy sigma=0.000675 ! Fit after self-cal, rms=0.087324Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.414 mas, bpa=-2.595 degrees ! Estimated noise=1021.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000441243 Jy ! Component: 100 - total flux cleaned = -0.000438581 Jy ! Component: 150 - total flux cleaned = -0.000406901 Jy ! Component: 200 - total flux cleaned = -0.000352034 Jy ! Total flux subtracted in 200 components = -0.000352034 Jy ! Clean residual min=-0.004596 max=0.004434 Jy/beam ! Clean residual mean=-0.000073 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.179807 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 57 components and 0.179807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087298Jy sigma=0.000670 ! Fit after self-cal, rms=0.087332Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087332Jy sigma=0.000670 ! Fit after self-cal, rms=0.087504Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=7.405 mas, bpa=-2.597 degrees ! Estimated noise=1020.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000402527 Jy ! Component: 100 - total flux cleaned = -0.000550737 Jy ! Component: 150 - total flux cleaned = -0.000575949 Jy ! Component: 200 - total flux cleaned = -0.00059829 Jy ! Total flux subtracted in 200 components = -0.00059829 Jy ! Clean residual min=-0.004009 max=0.003967 Jy/beam ! Clean residual mean=-0.000035 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.179209 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 0.179209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087485Jy sigma=0.000666 ! Fit after self-cal, rms=0.087549Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159374 Jy ! Component: 100 - total flux cleaned = -0.000180645 Jy ! Component: 150 - total flux cleaned = -0.000180861 Jy ! Component: 200 - total flux cleaned = -0.000161773 Jy ! Total flux subtracted in 200 components = -0.000161773 Jy ! Clean residual min=-0.004011 max=0.003990 Jy/beam ! Clean residual mean=-0.000035 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.179047 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 63 components and 0.179047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087538Jy sigma=0.000666 ! Fit after self-cal, rms=0.087537Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087537Jy sigma=0.000666 ! Fit after self-cal, rms=0.088382Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=7.401 mas, bpa=-2.656 degrees ! Estimated noise=1018.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000291286 Jy ! Component: 100 - total flux cleaned = -0.000435939 Jy ! Component: 150 - total flux cleaned = -0.000470361 Jy ! Component: 200 - total flux cleaned = -0.000501295 Jy ! Total flux subtracted in 200 components = -0.000501295 Jy ! Clean residual min=-0.003440 max=0.003370 Jy/beam ! Clean residual mean=-0.000033 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.178546 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 68 components and 0.178546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088371Jy sigma=0.000656 ! Fit after self-cal, rms=0.088445Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112917 Jy ! Component: 100 - total flux cleaned = -0.000112961 Jy ! Component: 150 - total flux cleaned = -0.000113095 Jy ! Component: 200 - total flux cleaned = -0.000113512 Jy ! Total flux subtracted in 200 components = -0.000113512 Jy ! Clean residual min=-0.003441 max=0.003373 Jy/beam ! Clean residual mean=-0.000033 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.178432 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.178432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088440Jy sigma=0.000656 ! Fit after self-cal, rms=0.088439Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088439Jy sigma=0.000656 ! Fit after self-cal, rms=0.088544Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.154 mas, bmaj=12.46 mas, bpa=-4.963 degrees ! Estimated noise=1296.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285614 Jy ! Component: 100 - total flux cleaned = 0.00025676 Jy ! Component: 150 - total flux cleaned = 0.000234344 Jy ! Component: 200 - total flux cleaned = 0.000214826 Jy ! Total flux subtracted in 200 components = 0.000214826 Jy ! Clean residual min=-0.004735 max=0.004894 Jy/beam ! Clean residual mean=-0.000074 rms=0.001434 Jy/beam ! Combined flux in latest and established models = 0.178647 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 0.178647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088547Jy sigma=0.000656 ! Fit after self-cal, rms=0.088548Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000180401 Jy ! Component: 100 - total flux cleaned = 0.000160933 Jy ! Component: 150 - total flux cleaned = 0.000159762 Jy ! Component: 200 - total flux cleaned = 0.000158624 Jy ! Total flux subtracted in 200 components = 0.000158624 Jy ! Clean residual min=-0.004744 max=0.004866 Jy/beam ! Clean residual mean=-0.000073 rms=0.001432 Jy/beam ! Combined flux in latest and established models = 0.178805 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 94 components and 0.178805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088555Jy sigma=0.000656 ! Fit after self-cal, rms=0.088553Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=7.401 mas, bpa=-2.589 degrees ! Estimated noise=1018.46 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.062 x 7.401 at -2.589 degrees (North through East) ! Clean map min=-0.0033054 max=0.15004 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.634 mas, bmaj=6.71 mas, bpa=-3.628 degrees ! Estimated noise=1359.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115139 Jy ! Component: 100 - total flux cleaned = 0.141673 Jy ! Component: 150 - total flux cleaned = 0.153989 Jy ! Component: 200 - total flux cleaned = 0.161528 Jy ! Total flux subtracted in 200 components = 0.161528 Jy ! Clean residual min=-0.005004 max=0.004456 Jy/beam ! Clean residual mean=-0.000020 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.161528 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.161528 Jy ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=7.401 mas, bpa=-2.589 degrees ! Estimated noise=1018.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00711395 Jy ! Component: 100 - total flux cleaned = 0.0111678 Jy ! Component: 150 - total flux cleaned = 0.0135778 Jy ! Component: 200 - total flux cleaned = 0.0150319 Jy ! Total flux subtracted in 200 components = 0.0150319 Jy ! Clean residual min=-0.003305 max=0.003468 Jy/beam ! Clean residual mean=-0.000034 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.17656 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 38 components and 0.17656 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.154 mas, bmaj=12.46 mas, bpa=-4.963 degrees ! Estimated noise=1296.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163902 Jy ! Component: 100 - total flux cleaned = 0.00165471 Jy ! Component: 150 - total flux cleaned = 0.00169459 Jy ! Component: 200 - total flux cleaned = 0.001766 Jy ! Total flux subtracted in 200 components = 0.001766 Jy ! Clean residual min=-0.004742 max=0.004893 Jy/beam ! Clean residual mean=-0.000075 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.178326 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.35682e-05 Jy ! Component: 100 - total flux cleaned = 7.94414e-05 Jy ! Component: 150 - total flux cleaned = 0.000122527 Jy ! Component: 200 - total flux cleaned = 0.000150237 Jy ! Total flux subtracted in 200 components = 0.000150237 Jy ! Clean residual min=-0.004750 max=0.004870 Jy/beam ! Clean residual mean=-0.000074 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.178476 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.178477 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=7.401 mas, bpa=-2.589 degrees ! Estimated noise=1018.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000316864 Jy ! Component: 100 - total flux cleaned = -0.000251493 Jy ! Component: 150 - total flux cleaned = -0.000276396 Jy ! Component: 200 - total flux cleaned = -0.000275739 Jy ! Total flux subtracted in 200 components = -0.000275739 Jy ! Clean residual min=-0.003352 max=0.003330 Jy/beam ! Clean residual mean=-0.000032 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.178201 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.178201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088569Jy sigma=0.000656 ! Fit after self-cal, rms=0.088565Jy sigma=0.000656 wmodel J1803+0341_S_2017_08_12_pus_map.mod ! Writing 56 model components to file: J1803+0341_S_2017_08_12_pus_map.mod wobs J1803+0341_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1803+0341_S_2017_08_12_pus_uvs.fits wwins J1803+0341_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J1803+0341_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000242791 Jy ! Component: 100 - total flux cleaned = 0.00035414 Jy ! Component: 150 - total flux cleaned = 0.000460269 Jy ! Component: 200 - total flux cleaned = 0.000357684 Jy ! Component: 250 - total flux cleaned = 0.00030915 Jy ! Component: 300 - total flux cleaned = 0.000261911 Jy ! Component: 350 - total flux cleaned = 0.0001712 Jy ! Component: 400 - total flux cleaned = 3.8375e-05 Jy ! Component: 450 - total flux cleaned = 3.78903e-05 Jy ! Component: 500 - total flux cleaned = -8.64831e-05 Jy ! Component: 550 - total flux cleaned = -4.88107e-06 Jy ! Component: 600 - total flux cleaned = -0.00012227 Jy ! Component: 650 - total flux cleaned = -8.45484e-05 Jy ! Component: 700 - total flux cleaned = -0.000122647 Jy ! Component: 750 - total flux cleaned = -0.00012219 Jy ! Component: 800 - total flux cleaned = -0.000192542 Jy ! Component: 850 - total flux cleaned = -0.00022616 Jy ! Component: 900 - total flux cleaned = -0.000158419 Jy ! Component: 950 - total flux cleaned = -0.000192175 Jy ! Component: 1000 - total flux cleaned = -0.000290661 Jy ! Component: 1050 - total flux cleaned = -0.000353791 Jy ! Component: 1100 - total flux cleaned = -0.000416602 Jy ! Component: 1150 - total flux cleaned = -0.000447598 Jy ! Component: 1200 - total flux cleaned = -0.000448095 Jy ! Component: 1250 - total flux cleaned = -0.000566726 Jy ! Component: 1300 - total flux cleaned = -0.000509328 Jy ! Component: 1350 - total flux cleaned = -0.000596479 Jy ! Component: 1400 - total flux cleaned = -0.000681314 Jy ! Component: 1450 - total flux cleaned = -0.0007088 Jy ! Component: 1500 - total flux cleaned = -0.000763276 Jy ! Component: 1550 - total flux cleaned = -0.00087062 Jy ! Component: 1600 - total flux cleaned = -0.000976437 Jy ! Component: 1650 - total flux cleaned = -0.00100229 Jy ! Component: 1700 - total flux cleaned = -0.00102831 Jy ! Component: 1750 - total flux cleaned = -0.00115572 Jy ! Component: 1800 - total flux cleaned = -0.00120629 Jy ! Component: 1850 - total flux cleaned = -0.00125567 Jy ! Component: 1900 - total flux cleaned = -0.00130498 Jy ! Component: 1950 - total flux cleaned = -0.00140154 Jy ! Component: 2000 - total flux cleaned = -0.00147296 Jy ! Component: 2050 - total flux cleaned = -0.00151974 Jy ! Component: 2100 - total flux cleaned = -0.00151937 Jy ! Component: 2150 - total flux cleaned = -0.00147351 Jy ! Component: 2200 - total flux cleaned = -0.00151893 Jy ! Component: 2250 - total flux cleaned = -0.00163161 Jy ! Component: 2300 - total flux cleaned = -0.00156449 Jy ! Component: 2350 - total flux cleaned = -0.00154243 Jy ! Component: 2400 - total flux cleaned = -0.00156473 Jy ! Component: 2450 - total flux cleaned = -0.00158627 Jy ! Component: 2500 - total flux cleaned = -0.00156454 Jy ! Component: 2550 - total flux cleaned = -0.00158574 Jy ! Component: 2600 - total flux cleaned = -0.00158585 Jy ! Component: 2650 - total flux cleaned = -0.00156524 Jy ! Component: 2700 - total flux cleaned = -0.0015653 Jy ! Component: 2750 - total flux cleaned = -0.00156533 Jy ! Component: 2800 - total flux cleaned = -0.00160614 Jy ! Component: 2850 - total flux cleaned = -0.00168606 Jy ! Component: 2900 - total flux cleaned = -0.00164654 Jy ! Component: 2950 - total flux cleaned = -0.00166621 Jy ! Component: 3000 - total flux cleaned = -0.00166647 Jy ! Component: 3050 - total flux cleaned = -0.00178225 Jy ! Component: 3100 - total flux cleaned = -0.00172486 Jy ! Component: 3150 - total flux cleaned = -0.00168724 Jy ! Component: 3200 - total flux cleaned = -0.00179986 Jy ! Component: 3250 - total flux cleaned = -0.00178133 Jy ! Component: 3300 - total flux cleaned = -0.00183661 Jy ! Component: 3350 - total flux cleaned = -0.00178171 Jy ! Component: 3400 - total flux cleaned = -0.00185438 Jy ! Component: 3450 - total flux cleaned = -0.00189041 Jy ! Component: 3500 - total flux cleaned = -0.00187245 Jy ! Component: 3550 - total flux cleaned = -0.00190761 Jy ! Component: 3600 - total flux cleaned = -0.00192501 Jy ! Component: 3650 - total flux cleaned = -0.00197735 Jy ! Component: 3700 - total flux cleaned = -0.00190794 Jy ! Component: 3750 - total flux cleaned = -0.00187369 Jy ! Component: 3800 - total flux cleaned = -0.00194181 Jy ! Component: 3850 - total flux cleaned = -0.00190805 Jy ! Component: 3900 - total flux cleaned = -0.00182431 Jy ! Component: 3950 - total flux cleaned = -0.00187431 Jy ! Component: 4000 - total flux cleaned = -0.0018412 Jy ! Component: 4050 - total flux cleaned = -0.00182506 Jy ! Total flux subtracted in 4096 components = -0.00187392 Jy ! Clean residual min=-0.000923 max=0.000980 Jy/beam ! Clean residual mean=-0.000007 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.176327 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 384 components and 0.176327 Jy ![Exited script file: muppet] wmap "J1803+0341_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.062 x 7.401 at -2.589 degrees (North through East) ! Clean map min=-0.0021177 max=0.15048 Jy/beam ! Writing clean map to FITS file: J1803+0341_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.15048 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000286282 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.570738 0.570738 1.14148 2.28295 4.5659 9.13181 18.2636 36.5272 73.0545 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.15 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.062 x 7.401 at -2.589 degrees (North through East) ! Clean map min=-0.0021177 max=0.15048 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1803+0341_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:04:55 2019