! Started logfile: J1800+7828_X_2017_06_10_pus_uvs.log on Mon May 6 12:50:56 2019 obs J1800+7828_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1800+7828_X_2017_06_10_pus_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.784568 visibilities/baseline/integration-bin. ! Found source: J1800+7828 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 15252 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1800+7828_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.928139Jy sigma=0.008481 ! Fit after self-cal, rms=0.885750Jy sigma=0.008109 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.7361 mas, bmaj=1.219 mas, bpa=-30.21 degrees ! Estimated noise=1017.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.35073 Jy ! Component: 100 - total flux cleaned = 1.67669 Jy ! Total flux subtracted in 100 components = 1.67669 Jy ! Clean residual min=-0.050214 max=0.157494 Jy/beam ! Clean residual mean=-0.000106 rms=0.014676 Jy/beam ! Combined flux in latest and established models = 1.67669 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.67669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.345956Jy sigma=0.003174 ! Fit after self-cal, rms=0.345239Jy sigma=0.003169 ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Added new window around map position (-1.2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170903 Jy ! Component: 100 - total flux cleaned = 0.274952 Jy ! Total flux subtracted in 100 components = 0.274952 Jy ! Clean residual min=-0.028522 max=0.064861 Jy/beam ! Clean residual mean=-0.000070 rms=0.008473 Jy/beam ! Combined flux in latest and established models = 1.95165 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 1.95165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.200670Jy sigma=0.001810 ! Fit after self-cal, rms=0.191456Jy sigma=0.001736 ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0815076 Jy ! Component: 100 - total flux cleaned = 0.131729 Jy ! Total flux subtracted in 100 components = 0.131729 Jy ! Clean residual min=-0.019757 max=0.037885 Jy/beam ! Clean residual mean=-0.000051 rms=0.005300 Jy/beam ! Combined flux in latest and established models = 2.08337 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 2.08337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.138069Jy sigma=0.001227 ! Fit after self-cal, rms=0.133968Jy sigma=0.001193 ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0414503 Jy ! Component: 100 - total flux cleaned = 0.066818 Jy ! Total flux subtracted in 100 components = 0.066818 Jy ! Clean residual min=-0.015846 max=0.023979 Jy/beam ! Clean residual mean=-0.000041 rms=0.004035 Jy/beam ! Combined flux in latest and established models = 2.15019 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 2.15019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116951Jy sigma=0.001027 ! Fit after self-cal, rms=0.115385Jy sigma=0.001014 ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.9467 mas, bmaj=1.454 mas, bpa=-32.67 degrees ! Estimated noise=642.172 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267721 Jy ! Component: 100 - total flux cleaned = 0.0356358 Jy ! Component: 150 - total flux cleaned = 0.0382527 Jy ! Component: 200 - total flux cleaned = 0.0397776 Jy ! Total flux subtracted in 200 components = 0.0397776 Jy ! Clean residual min=-0.014731 max=0.015908 Jy/beam ! Clean residual mean=-0.000084 rms=0.003408 Jy/beam ! Combined flux in latest and established models = 2.18997 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 2.18997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109673Jy sigma=0.000957 ! Fit after self-cal, rms=0.108681Jy sigma=0.000948 ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.01 KP 1.01 ! LA 0.98 MK 0.97 NL 0.98 OV 1.00 ! PT 1.00 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.97 KP 0.98 ! LA 0.98 MK 0.97 NL 0.98 OV 1.00 ! PT 1.03 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.97 KP 0.99 ! LA 1.00 MK 0.98 NL 0.98 OV 1.00 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.00 KP 0.99 ! LA 1.01 MK 0.98 NL 0.98 OV 1.00 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.96 KP 0.99 ! LA 0.99 MK 1.00 NL 0.98 OV 1.01 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.99 KP 0.99 ! LA 1.00 MK 0.98 NL 0.98 OV 1.00 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.98 KP 1.00 ! LA 1.01 MK 0.99 NL 0.98 OV 1.00 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 0.99 KP 0.99 ! LA 0.98 MK 0.97 NL 0.97 OV 1.00 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.98 KP 1.00 ! LA 1.00 MK 0.96 NL 0.98 OV 1.00 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.98 KP 1.00 ! LA 1.02 MK 0.98 NL 0.97 OV 1.00 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.01 KP 1.00 ! LA 1.02 MK 0.98 NL 0.97 OV 1.01 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.99 KP 0.96 ! LA 0.99 MK 0.97 NL 0.97 OV 1.00 ! PT 1.03 SC 1.03 ! ! ! Fit before self-cal, rms=0.108681Jy sigma=0.000948 ! Fit after self-cal, rms=0.094093Jy sigma=0.000816 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.9488 mas, bmaj=1.464 mas, bpa=-32.46 degrees ! Estimated noise=642.548 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0180918 Jy ! Component: 100 - total flux cleaned = 0.021483 Jy ! Component: 150 - total flux cleaned = 0.0223801 Jy ! Component: 200 - total flux cleaned = 0.0228381 Jy ! Total flux subtracted in 200 components = 0.0228381 Jy ! Clean residual min=-0.008654 max=0.011788 Jy/beam ! Clean residual mean=-0.000097 rms=0.002252 Jy/beam ! Combined flux in latest and established models = 2.21281 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 2.21281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090271Jy sigma=0.000781 ! Fit after self-cal, rms=0.089940Jy sigma=0.000777 ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Added new window around map position (-7.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129337 Jy ! Component: 100 - total flux cleaned = 0.0216638 Jy ! Component: 150 - total flux cleaned = 0.027132 Jy ! Component: 200 - total flux cleaned = 0.0312064 Jy ! Total flux subtracted in 200 components = 0.0312064 Jy ! Clean residual min=-0.007465 max=0.006931 Jy/beam ! Clean residual mean=-0.000042 rms=0.001839 Jy/beam ! Combined flux in latest and established models = 2.24401 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 72 components and 2.24401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087498Jy sigma=0.000755 ! Fit after self-cal, rms=0.087287Jy sigma=0.000753 ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087287Jy sigma=0.000753 ! Fit after self-cal, rms=0.081445Jy sigma=0.000703 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.9495 mas, bmaj=1.462 mas, bpa=-32.46 degrees ! Estimated noise=642.249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00326529 Jy ! Component: 100 - total flux cleaned = 0.00507876 Jy ! Component: 150 - total flux cleaned = 0.00592076 Jy ! Component: 200 - total flux cleaned = 0.00653579 Jy ! Total flux subtracted in 200 components = 0.00653579 Jy ! Clean residual min=-0.004651 max=0.004491 Jy/beam ! Clean residual mean=-0.000025 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 2.25055 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 2.25055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080597Jy sigma=0.000695 ! Fit after self-cal, rms=0.080536Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143997 Jy ! Component: 100 - total flux cleaned = 0.00227255 Jy ! Component: 150 - total flux cleaned = 0.00303278 Jy ! Component: 200 - total flux cleaned = 0.00362125 Jy ! Total flux subtracted in 200 components = 0.00362125 Jy ! Clean residual min=-0.004342 max=0.004244 Jy/beam ! Clean residual mean=-0.000019 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 2.25417 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 95 components and 2.25417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080129Jy sigma=0.000691 ! Fit after self-cal, rms=0.080089Jy sigma=0.000690 ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080089Jy sigma=0.000690 ! Fit after self-cal, rms=0.080022Jy sigma=0.000690 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.9499 mas, bmaj=1.463 mas, bpa=-32.46 degrees ! Estimated noise=641.976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000734034 Jy ! Component: 100 - total flux cleaned = 0.000108802 Jy ! Component: 150 - total flux cleaned = 0.000550971 Jy ! Component: 200 - total flux cleaned = 0.00116523 Jy ! Total flux subtracted in 200 components = 0.00116523 Jy ! Clean residual min=-0.004198 max=0.003956 Jy/beam ! Clean residual mean=-0.000017 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 2.25534 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 104 components and 2.25534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079695Jy sigma=0.000687 ! Fit after self-cal, rms=0.079669Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000419925 Jy ! Component: 100 - total flux cleaned = 0.000997433 Jy ! Component: 150 - total flux cleaned = 0.00153375 Jy ! Component: 200 - total flux cleaned = 0.00195204 Jy ! Total flux subtracted in 200 components = 0.00195204 Jy ! Clean residual min=-0.003940 max=0.003870 Jy/beam ! Clean residual mean=-0.000014 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 2.25729 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 108 components and 2.25729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079466Jy sigma=0.000685 ! Fit after self-cal, rms=0.079444Jy sigma=0.000684 ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Added new window around map position (-11.2, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341125 Jy ! Component: 100 - total flux cleaned = 0.00502652 Jy ! Component: 150 - total flux cleaned = 0.0063188 Jy ! Component: 200 - total flux cleaned = 0.00733874 Jy ! Total flux subtracted in 200 components = 0.00733874 Jy ! Clean residual min=-0.003806 max=0.002765 Jy/beam ! Clean residual mean=-0.000002 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 2.26463 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 118 components and 2.26463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079181Jy sigma=0.000682 ! Fit after self-cal, rms=0.079164Jy sigma=0.000682 ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079164Jy sigma=0.000682 ! Fit after self-cal, rms=0.079132Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=2.256 mas, bmaj=2.751 mas, bpa=-43.23 degrees ! Estimated noise=822.658 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293272 Jy ! Component: 100 - total flux cleaned = 0.00428851 Jy ! Component: 150 - total flux cleaned = 0.00511272 Jy ! Component: 200 - total flux cleaned = 0.00580946 Jy ! Total flux subtracted in 200 components = 0.00580946 Jy ! Clean residual min=-0.002995 max=0.002865 Jy/beam ! Clean residual mean=0.000023 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 2.27044 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 159 components and 2.27044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079075Jy sigma=0.000681 ! Fit after self-cal, rms=0.079068Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106858 Jy ! Component: 100 - total flux cleaned = 0.00169234 Jy ! Component: 150 - total flux cleaned = 0.00219283 Jy ! Component: 200 - total flux cleaned = 0.00267 Jy ! Total flux subtracted in 200 components = 0.00267 Jy ! Clean residual min=-0.002996 max=0.002732 Jy/beam ! Clean residual mean=0.000034 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 2.27311 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 178 components and 2.27311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079052Jy sigma=0.000681 ! Fit after self-cal, rms=0.079051Jy sigma=0.000681 ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.9501 mas, bmaj=1.464 mas, bpa=-32.45 degrees ! Estimated noise=641.823 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9501 x 1.464 at -32.45 degrees (North through East) ! Clean map min=-0.0031741 max=1.7647 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079051Jy sigma=0.000681 ! Fit after self-cal, rms=0.073241Jy sigma=0.000628 ! Inverting map and beam ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.9503 mas, bmaj=1.464 mas, bpa=-32.44 degrees ! Estimated noise=641.666 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132755 Jy ! Component: 100 - total flux cleaned = -0.00132387 Jy ! Component: 150 - total flux cleaned = -0.00132543 Jy ! Component: 200 - total flux cleaned = -0.00138873 Jy ! Total flux subtracted in 200 components = -0.00138873 Jy ! Clean residual min=-0.003424 max=0.002779 Jy/beam ! Clean residual mean=0.000011 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 2.27172 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 181 components and 2.27172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073094Jy sigma=0.000627 ! Fit after self-cal, rms=0.073080Jy sigma=0.000627 ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.61556e-05 Jy ! Component: 100 - total flux cleaned = 8.43815e-05 Jy ! Component: 150 - total flux cleaned = 0.00019367 Jy ! Component: 200 - total flux cleaned = 0.000297455 Jy ! Total flux subtracted in 200 components = 0.000297455 Jy ! Clean residual min=-0.003308 max=0.002775 Jy/beam ! Clean residual mean=0.000012 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 2.27201 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 188 components and 2.27202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072991Jy sigma=0.000626 ! Fit after self-cal, rms=0.072981Jy sigma=0.000626 ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072981Jy sigma=0.000626 ! Fit after self-cal, rms=0.072963Jy sigma=0.000626 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.738 mas, bmaj=1.227 mas, bpa=-30.07 degrees ! Estimated noise=1017.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.34572 Jy ! Component: 100 - total flux cleaned = 1.69336 Jy ! Component: 150 - total flux cleaned = 1.87847 Jy ! Component: 200 - total flux cleaned = 1.98558 Jy ! Total flux subtracted in 200 components = 1.98558 Jy ! Clean residual min=-0.016713 max=0.053964 Jy/beam ! Clean residual mean=-0.000087 rms=0.005496 Jy/beam ! Combined flux in latest and established models = 1.98558 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.98558 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.9505 mas, bmaj=1.464 mas, bpa=-32.42 degrees ! Estimated noise=641.545 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0917309 Jy ! Component: 100 - total flux cleaned = 0.141441 Jy ! Component: 150 - total flux cleaned = 0.17085 Jy ! Component: 200 - total flux cleaned = 0.189934 Jy ! Total flux subtracted in 200 components = 0.189934 Jy ! Clean residual min=-0.006712 max=0.010797 Jy/beam ! Clean residual mean=-0.000122 rms=0.002047 Jy/beam ! Combined flux in latest and established models = 2.17552 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 45 components and 2.17552 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143543 Jy ! Component: 100 - total flux cleaned = 0.0257415 Jy ! Component: 150 - total flux cleaned = 0.0351411 Jy ! Component: 200 - total flux cleaned = 0.0430953 Jy ! Total flux subtracted in 200 components = 0.0430953 Jy ! Clean residual min=-0.004839 max=0.005984 Jy/beam ! Clean residual mean=-0.000067 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 2.21861 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 73 components and 2.21861 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Added new window around map position (-4.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00701951 Jy ! Component: 100 - total flux cleaned = 0.012978 Jy ! Component: 150 - total flux cleaned = 0.0181975 Jy ! Component: 200 - total flux cleaned = 0.0224584 Jy ! Total flux subtracted in 200 components = 0.0224584 Jy ! Clean residual min=-0.004275 max=0.004191 Jy/beam ! Clean residual mean=-0.000033 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 2.24107 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 92 components and 2.24107 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=2.256 mas, bmaj=2.751 mas, bpa=-43.2 degrees ! Estimated noise=821.926 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00715327 Jy ! Component: 100 - total flux cleaned = 0.0123736 Jy ! Component: 150 - total flux cleaned = 0.0164305 Jy ! Component: 200 - total flux cleaned = 0.0196624 Jy ! Total flux subtracted in 200 components = 0.0196624 Jy ! Clean residual min=-0.003235 max=0.002711 Jy/beam ! Clean residual mean=-0.000003 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 2.26073 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262148 Jy ! Component: 100 - total flux cleaned = 0.00478718 Jy ! Component: 150 - total flux cleaned = 0.00611868 Jy ! Component: 200 - total flux cleaned = 0.00728278 Jy ! Total flux subtracted in 200 components = 0.00728278 Jy ! Clean residual min=-0.002831 max=0.002485 Jy/beam ! Clean residual mean=0.000023 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 2.26802 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 167 components and 2.26802 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.9505 mas, bmaj=1.464 mas, bpa=-32.42 degrees ! Estimated noise=641.545 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124204 Jy ! Component: 100 - total flux cleaned = -0.00104251 Jy ! Component: 150 - total flux cleaned = -0.000617097 Jy ! Component: 200 - total flux cleaned = -0.000237272 Jy ! Total flux subtracted in 200 components = -0.000237272 Jy ! Clean residual min=-0.003034 max=0.003334 Jy/beam ! Clean residual mean=0.000010 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 2.26778 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 182 components and 2.26778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072976Jy sigma=0.000626 ! Fit after self-cal, rms=0.072822Jy sigma=0.000624 wmodel J1800+7828_X_2017_06_10_pus_map.mod ! Writing 182 model components to file: J1800+7828_X_2017_06_10_pus_map.mod wobs J1800+7828_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1800+7828_X_2017_06_10_pus_uvs.fits wwins J1800+7828_X_2017_06_10_pus_map.win ! wwins: Wrote 6 windows to J1800+7828_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000499078 Jy ! Component: 100 - total flux cleaned = -0.00113777 Jy ! Component: 150 - total flux cleaned = -0.00118227 Jy ! Component: 200 - total flux cleaned = -0.0012643 Jy ! Component: 250 - total flux cleaned = -0.00130387 Jy ! Component: 300 - total flux cleaned = -0.00118975 Jy ! Component: 350 - total flux cleaned = -0.00107766 Jy ! Component: 400 - total flux cleaned = -0.000822249 Jy ! Component: 450 - total flux cleaned = -0.000786679 Jy ! Component: 500 - total flux cleaned = -0.000786175 Jy ! Component: 550 - total flux cleaned = -0.000819365 Jy ! Component: 600 - total flux cleaned = -0.000752259 Jy ! Component: 650 - total flux cleaned = -0.000818376 Jy ! Component: 700 - total flux cleaned = -0.000688465 Jy ! Component: 750 - total flux cleaned = -0.000625187 Jy ! Component: 800 - total flux cleaned = -0.000656819 Jy ! Component: 850 - total flux cleaned = -0.00059475 Jy ! Component: 900 - total flux cleaned = -0.000595078 Jy ! Component: 950 - total flux cleaned = -0.000474406 Jy ! Component: 1000 - total flux cleaned = -0.000385444 Jy ! Component: 1050 - total flux cleaned = -0.000326806 Jy ! Component: 1100 - total flux cleaned = -0.000210599 Jy ! Component: 1150 - total flux cleaned = -0.000153727 Jy ! Component: 1200 - total flux cleaned = -0.000295062 Jy ! Component: 1250 - total flux cleaned = -0.000322796 Jy ! Component: 1300 - total flux cleaned = -0.000267767 Jy ! Component: 1350 - total flux cleaned = -0.000295544 Jy ! Component: 1400 - total flux cleaned = -0.000322812 Jy ! Component: 1450 - total flux cleaned = -0.000402955 Jy ! Component: 1500 - total flux cleaned = -0.0004824 Jy ! Component: 1550 - total flux cleaned = -0.000482048 Jy ! Component: 1600 - total flux cleaned = -0.000507928 Jy ! Component: 1650 - total flux cleaned = -0.000431089 Jy ! Component: 1700 - total flux cleaned = -0.000533345 Jy ! Component: 1750 - total flux cleaned = -0.00048327 Jy ! Component: 1800 - total flux cleaned = -0.000483312 Jy ! Component: 1850 - total flux cleaned = -0.000434122 Jy ! Component: 1900 - total flux cleaned = -0.000434338 Jy ! Component: 1950 - total flux cleaned = -0.00031293 Jy ! Component: 2000 - total flux cleaned = -0.000337072 Jy ! Total flux subtracted in 2048 components = -0.00021784 Jy ! Clean residual min=-0.001391 max=0.001197 Jy/beam ! Clean residual mean=0.000003 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 2.26756 Jy keep ! Adding 150 model components to the UV plane model. ! The established model now contains 331 components and 2.26756 Jy ![Exited script file: muppet] wmap "J1800+7828_X_2017_06_10_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9505 x 1.464 at -32.42 degrees (North through East) ! Clean map min=-0.0018702 max=1.7634 Jy/beam ! Writing clean map to FITS file: J1800+7828_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.76344 invert ! Inverting map ! Your choice of large map pixels excluded 0.0918% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00043909 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0746991 0.0746991 0.149398 0.298797 0.597593 1.19519 2.39037 4.78075 9.56149 19.123 38.246 76.4919 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.763 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9505 x 1.464 at -32.42 degrees (North through East) ! Clean map min=-0.0018702 max=1.7634 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1800+7828_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:50:58 2019