! Started logfile: J1800+7828_X_2017_03_23_pus_uvs.log on Mon May 13 10:26:44 2019 obs J1800+7828_X_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1800+7828_X_2017_03_23_pus_uva.fits ! AN table 1: 31 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.799283 visibilities/baseline/integration-bin. ! Found source: J1800+7828 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1124 lines of history. ! ! Reading 13380 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1800+7828_X_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.661388Jy sigma=0.005273 ! Fit after self-cal, rms=0.639369Jy sigma=0.005097 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=0.8636 mas, bmaj=0.9413 mas, bpa=-57.86 degrees ! Estimated noise=1273.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.17943 Jy ! Component: 100 - total flux cleaned = 1.4621 Jy ! Total flux subtracted in 100 components = 1.4621 Jy ! Clean residual min=-0.036174 max=0.118692 Jy/beam ! Clean residual mean=-0.000740 rms=0.011865 Jy/beam ! Combined flux in latest and established models = 1.4621 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.4621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.303912Jy sigma=0.002376 ! Fit after self-cal, rms=0.302942Jy sigma=0.002371 ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Added new window around map position (-1.2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132147 Jy ! Component: 100 - total flux cleaned = 0.205248 Jy ! Total flux subtracted in 100 components = 0.205248 Jy ! Clean residual min=-0.027360 max=0.046788 Jy/beam ! Clean residual mean=-0.000431 rms=0.008435 Jy/beam ! Combined flux in latest and established models = 1.66734 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 20 components and 1.66734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.221478Jy sigma=0.001686 ! Fit after self-cal, rms=0.216678Jy sigma=0.001660 ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0542055 Jy ! Component: 100 - total flux cleaned = 0.0875056 Jy ! Total flux subtracted in 100 components = 0.0875056 Jy ! Clean residual min=-0.023890 max=0.036980 Jy/beam ! Clean residual mean=-0.000297 rms=0.007407 Jy/beam ! Combined flux in latest and established models = 1.75485 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 29 components and 1.75485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.197641Jy sigma=0.001502 ! Fit after self-cal, rms=0.195983Jy sigma=0.001493 ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=1.067 mas, bmaj=1.18 mas, bpa=-61.47 degrees ! Estimated noise=837.033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.04098 Jy ! Component: 100 - total flux cleaned = 0.0629937 Jy ! Component: 150 - total flux cleaned = 0.0714337 Jy ! Component: 200 - total flux cleaned = 0.0747025 Jy ! Total flux subtracted in 200 components = 0.0747025 Jy ! Clean residual min=-0.028243 max=0.037384 Jy/beam ! Clean residual mean=-0.000500 rms=0.008509 Jy/beam ! Combined flux in latest and established models = 1.82955 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 1.82955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.188065Jy sigma=0.001421 ! Fit after self-cal, rms=0.186963Jy sigma=0.001415 ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.98 KP 1.00 ! LA 0.96 MK 0.95 NL 1.05 OV 0.99 ! PT 0.95 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.99 KP 1.00 ! LA 0.97 MK 0.96 NL 1.04 OV 0.99 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.95 KP 1.00 ! LA 0.99 MK 0.97 NL 1.04 OV 0.99 ! PT 0.98 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.97 KP 0.99 ! LA 0.99 MK 0.98 NL 1.04 OV 1.03 ! PT 0.94 SC 1.08 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.93 KP 1.00 ! LA 0.98 MK 0.98 NL 1.04 OV 0.99 ! PT 0.94 SC 1.07 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.96 KP 1.00 ! LA 0.98 MK 0.98 NL 1.04 OV 0.99 ! PT 0.94 SC 1.10 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.97 KP 1.00 ! LA 1.00 MK 0.98 NL 1.05 OV 1.00 ! PT 0.94 SC 1.08 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.06 HN 0.96 KP 0.99 ! LA 0.98 MK 0.97 NL 1.04 OV 1.00 ! PT 0.94 SC 1.09 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.97 KP 1.00 ! LA 0.99 MK 0.95 NL 1.04 OV 0.99 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.00 KP 1.00 ! LA 1.01 MK 0.98 NL 1.04 OV 0.99 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.98 KP 0.98 ! LA 1.01 MK 0.98 NL 1.04 OV 0.99 ! PT 0.96 SC 1.05 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.96 KP 1.03 ! LA 0.98 MK 0.96 NL 1.04 OV 1.00 ! PT 0.95 SC 1.04 ! ! ! Fit before self-cal, rms=0.186963Jy sigma=0.001415 ! Fit after self-cal, rms=0.176967Jy sigma=0.001303 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=1.067 mas, bmaj=1.182 mas, bpa=-61.41 degrees ! Estimated noise=835.234 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0116815 Jy ! Component: 100 - total flux cleaned = -0.0151839 Jy ! Component: 150 - total flux cleaned = -0.0171108 Jy ! Component: 200 - total flux cleaned = -0.017752 Jy ! Total flux subtracted in 200 components = -0.017752 Jy ! Clean residual min=-0.033465 max=0.030101 Jy/beam ! Clean residual mean=-0.000125 rms=0.007601 Jy/beam ! Combined flux in latest and established models = 1.8118 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 1.8118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.174675Jy sigma=0.001283 ! Fit after self-cal, rms=0.174130Jy sigma=0.001280 ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.174130Jy sigma=0.001280 ! Fit after self-cal, rms=0.126461Jy sigma=0.000778 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=1.07 mas, bmaj=1.182 mas, bpa=-60.88 degrees ! Estimated noise=833.746 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154773 Jy ! Component: 100 - total flux cleaned = 0.015955 Jy ! Component: 150 - total flux cleaned = 0.0154986 Jy ! Component: 200 - total flux cleaned = 0.0152875 Jy ! Total flux subtracted in 200 components = 0.0152875 Jy ! Clean residual min=-0.008485 max=0.011764 Jy/beam ! Clean residual mean=-0.000094 rms=0.002310 Jy/beam ! Combined flux in latest and established models = 1.82709 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 1.82709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123550Jy sigma=0.000749 ! Fit after self-cal, rms=0.122871Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00969286 Jy ! Component: 100 - total flux cleaned = 0.0111108 Jy ! Component: 150 - total flux cleaned = 0.0120382 Jy ! Component: 200 - total flux cleaned = 0.0126432 Jy ! Total flux subtracted in 200 components = 0.0126432 Jy ! Clean residual min=-0.008280 max=0.010848 Jy/beam ! Clean residual mean=-0.000048 rms=0.002099 Jy/beam ! Combined flux in latest and established models = 1.83973 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 64 components and 1.83973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121453Jy sigma=0.000731 ! Fit after self-cal, rms=0.121226Jy sigma=0.000730 ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Added new window around map position (-6.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117659 Jy ! Component: 100 - total flux cleaned = 0.017409 Jy ! Component: 150 - total flux cleaned = 0.0207519 Jy ! Component: 200 - total flux cleaned = 0.0218936 Jy ! Total flux subtracted in 200 components = 0.0218936 Jy ! Clean residual min=-0.008050 max=0.007589 Jy/beam ! Clean residual mean=0.000030 rms=0.001836 Jy/beam ! Combined flux in latest and established models = 1.86162 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 85 components and 1.86162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119909Jy sigma=0.000716 ! Fit after self-cal, rms=0.119706Jy sigma=0.000715 ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119706Jy sigma=0.000715 ! Fit after self-cal, rms=0.118408Jy sigma=0.000705 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=1.069 mas, bmaj=1.182 mas, bpa=-60.51 degrees ! Estimated noise=832.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00762946 Jy ! Component: 100 - total flux cleaned = 0.0105401 Jy ! Component: 150 - total flux cleaned = 0.0123787 Jy ! Component: 200 - total flux cleaned = 0.0136312 Jy ! Total flux subtracted in 200 components = 0.0136312 Jy ! Clean residual min=-0.005815 max=0.006221 Jy/beam ! Clean residual mean=0.000001 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 1.87526 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 91 components and 1.87526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117360Jy sigma=0.000696 ! Fit after self-cal, rms=0.117195Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272822 Jy ! Component: 100 - total flux cleaned = 0.0037394 Jy ! Component: 150 - total flux cleaned = 0.00435108 Jy ! Component: 200 - total flux cleaned = 0.00505415 Jy ! Total flux subtracted in 200 components = 0.00505415 Jy ! Clean residual min=-0.005428 max=0.005589 Jy/beam ! Clean residual mean=0.000019 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 1.88031 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 94 components and 1.88031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116711Jy sigma=0.000691 ! Fit after self-cal, rms=0.116648Jy sigma=0.000690 ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116648Jy sigma=0.000690 ! Fit after self-cal, rms=0.116358Jy sigma=0.000688 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=2.501 mas, bmaj=2.618 mas, bpa=-51.51 degrees ! Estimated noise=1026.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0073305 Jy ! Component: 100 - total flux cleaned = 0.0100359 Jy ! Component: 150 - total flux cleaned = 0.0114366 Jy ! Component: 200 - total flux cleaned = 0.0118805 Jy ! Total flux subtracted in 200 components = 0.0118805 Jy ! Clean residual min=-0.005300 max=0.007057 Jy/beam ! Clean residual mean=0.000042 rms=0.001801 Jy/beam ! Combined flux in latest and established models = 1.89219 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 106 components and 1.89219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116159Jy sigma=0.000686 ! Fit after self-cal, rms=0.116070Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114185 Jy ! Component: 100 - total flux cleaned = 0.00211471 Jy ! Component: 150 - total flux cleaned = 0.00245052 Jy ! Component: 200 - total flux cleaned = 0.00267203 Jy ! Total flux subtracted in 200 components = 0.00267203 Jy ! Clean residual min=-0.005168 max=0.006546 Jy/beam ! Clean residual mean=0.000064 rms=0.001765 Jy/beam ! Combined flux in latest and established models = 1.89486 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 113 components and 1.89486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116030Jy sigma=0.000685 ! Fit after self-cal, rms=0.116013Jy sigma=0.000684 ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=1.068 mas, bmaj=1.183 mas, bpa=-60.15 degrees ! Estimated noise=833.337 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.068 x 1.183 at -60.15 degrees (North through East) ! Clean map min=-0.0044119 max=1.5149 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116013Jy sigma=0.000684 ! Fit after self-cal, rms=0.110037Jy sigma=0.000634 ! Inverting map and beam ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=1.068 mas, bmaj=1.183 mas, bpa=-60.18 degrees ! Estimated noise=833.345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274461 Jy ! Component: 100 - total flux cleaned = 0.00289727 Jy ! Component: 150 - total flux cleaned = 0.00290549 Jy ! Component: 200 - total flux cleaned = 0.0029101 Jy ! Total flux subtracted in 200 components = 0.0029101 Jy ! Clean residual min=-0.004410 max=0.004851 Jy/beam ! Clean residual mean=0.000026 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 1.89777 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 120 components and 1.89777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109572Jy sigma=0.000631 ! Fit after self-cal, rms=0.109524Jy sigma=0.000630 ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000688642 Jy ! Component: 100 - total flux cleaned = 0.000466606 Jy ! Component: 150 - total flux cleaned = 0.000469647 Jy ! Component: 200 - total flux cleaned = 0.000467718 Jy ! Total flux subtracted in 200 components = 0.000467718 Jy ! Clean residual min=-0.004225 max=0.004723 Jy/beam ! Clean residual mean=0.000028 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 1.89824 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 125 components and 1.89824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109281Jy sigma=0.000629 ! Fit after self-cal, rms=0.109256Jy sigma=0.000629 ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109256Jy sigma=0.000629 ! Fit after self-cal, rms=0.109139Jy sigma=0.000628 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=0.8637 mas, bmaj=0.9443 mas, bpa=-57.46 degrees ! Estimated noise=1267.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.17167 Jy ! Component: 100 - total flux cleaned = 1.47265 Jy ! Component: 150 - total flux cleaned = 1.62033 Jy ! Component: 200 - total flux cleaned = 1.70116 Jy ! Total flux subtracted in 200 components = 1.70116 Jy ! Clean residual min=-0.012272 max=0.040948 Jy/beam ! Clean residual mean=-0.000293 rms=0.004068 Jy/beam ! Combined flux in latest and established models = 1.70116 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.70116 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=1.067 mas, bmaj=1.183 mas, bpa=-59.79 degrees ! Estimated noise=833.663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0677274 Jy ! Component: 100 - total flux cleaned = 0.103735 Jy ! Component: 150 - total flux cleaned = 0.125778 Jy ! Component: 200 - total flux cleaned = 0.141861 Jy ! Total flux subtracted in 200 components = 0.141861 Jy ! Clean residual min=-0.005954 max=0.009874 Jy/beam ! Clean residual mean=-0.000193 rms=0.001802 Jy/beam ! Combined flux in latest and established models = 1.84302 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 49 components and 1.84302 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Added new window around map position (-0.6, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126188 Jy ! Component: 100 - total flux cleaned = 0.0227116 Jy ! Component: 150 - total flux cleaned = 0.0309224 Jy ! Component: 200 - total flux cleaned = 0.0377076 Jy ! Total flux subtracted in 200 components = 0.0377076 Jy ! Clean residual min=-0.004990 max=0.005606 Jy/beam ! Clean residual mean=-0.000050 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 1.88073 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 72 components and 1.88073 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Added new window around map position (-9, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0062145 Jy ! Component: 100 - total flux cleaned = 0.0113133 Jy ! Component: 150 - total flux cleaned = 0.0151947 Jy ! Component: 200 - total flux cleaned = 0.0169225 Jy ! Total flux subtracted in 200 components = 0.0169225 Jy ! Clean residual min=-0.004580 max=0.004160 Jy/beam ! Clean residual mean=0.000010 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 1.89765 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 86 components and 1.89765 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=2.497 mas, bmaj=2.618 mas, bpa=-50.09 degrees ! Estimated noise=1027.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00487731 Jy ! Component: 100 - total flux cleaned = 0.00731411 Jy ! Component: 150 - total flux cleaned = 0.00846134 Jy ! Component: 200 - total flux cleaned = 0.00922965 Jy ! Total flux subtracted in 200 components = 0.00922965 Jy ! Clean residual min=-0.004421 max=0.004487 Jy/beam ! Clean residual mean=0.000086 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 1.90688 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000643316 Jy ! Component: 100 - total flux cleaned = 0.00106981 Jy ! Component: 150 - total flux cleaned = 0.00148825 Jy ! Component: 200 - total flux cleaned = 0.00176027 Jy ! Total flux subtracted in 200 components = 0.00176027 Jy ! Clean residual min=-0.004360 max=0.004389 Jy/beam ! Clean residual mean=0.000099 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 1.90864 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 130 components and 1.90864 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=1.067 mas, bmaj=1.183 mas, bpa=-59.79 degrees ! Estimated noise=833.663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000764394 Jy ! Component: 100 - total flux cleaned = 0.000414648 Jy ! Component: 150 - total flux cleaned = 0.000194054 Jy ! Component: 200 - total flux cleaned = -1.41882e-05 Jy ! Total flux subtracted in 200 components = -1.41882e-05 Jy ! Clean residual min=-0.004093 max=0.003984 Jy/beam ! Clean residual mean=0.000048 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 1.90863 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 139 components and 1.90863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108301Jy sigma=0.000624 ! Fit after self-cal, rms=0.107929Jy sigma=0.000621 wmodel J1800+7828_X_2017_03_23_pus_map.mod ! Writing 139 model components to file: J1800+7828_X_2017_03_23_pus_map.mod wobs J1800+7828_X_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1800+7828_X_2017_03_23_pus_uvs.fits wwins J1800+7828_X_2017_03_23_pus_map.win ! wwins: Wrote 6 windows to J1800+7828_X_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000444239 Jy ! Component: 100 - total flux cleaned = -0.000314765 Jy ! Component: 150 - total flux cleaned = -7.14009e-05 Jy ! Component: 200 - total flux cleaned = 0.000164925 Jy ! Component: 250 - total flux cleaned = 0.000395812 Jy ! Component: 300 - total flux cleaned = 0.000675577 Jy ! Component: 350 - total flux cleaned = 0.000674414 Jy ! Component: 400 - total flux cleaned = 0.000834829 Jy ! Component: 450 - total flux cleaned = 0.000939242 Jy ! Component: 500 - total flux cleaned = 0.00104271 Jy ! Component: 550 - total flux cleaned = 0.00109381 Jy ! Component: 600 - total flux cleaned = 0.00129334 Jy ! Component: 650 - total flux cleaned = 0.00153809 Jy ! Component: 700 - total flux cleaned = 0.00144039 Jy ! Component: 750 - total flux cleaned = 0.00144021 Jy ! Component: 800 - total flux cleaned = 0.00158202 Jy ! Component: 850 - total flux cleaned = 0.00167527 Jy ! Component: 900 - total flux cleaned = 0.00181244 Jy ! Component: 950 - total flux cleaned = 0.00185815 Jy ! Component: 1000 - total flux cleaned = 0.00212772 Jy ! Component: 1050 - total flux cleaned = 0.00225957 Jy ! Component: 1100 - total flux cleaned = 0.00217176 Jy ! Component: 1150 - total flux cleaned = 0.00234562 Jy ! Component: 1200 - total flux cleaned = 0.00243183 Jy ! Component: 1250 - total flux cleaned = 0.00264395 Jy ! Component: 1300 - total flux cleaned = 0.00285313 Jy ! Component: 1350 - total flux cleaned = 0.00289404 Jy ! Component: 1400 - total flux cleaned = 0.00309957 Jy ! Component: 1450 - total flux cleaned = 0.00322116 Jy ! Component: 1500 - total flux cleaned = 0.00350295 Jy ! Component: 1550 - total flux cleaned = 0.00358279 Jy ! Component: 1600 - total flux cleaned = 0.00389894 Jy ! Component: 1650 - total flux cleaned = 0.00405565 Jy ! Component: 1700 - total flux cleaned = 0.00425032 Jy ! Component: 1750 - total flux cleaned = 0.00451938 Jy ! Component: 1800 - total flux cleaned = 0.00459602 Jy ! Component: 1850 - total flux cleaned = 0.004861 Jy ! Component: 1900 - total flux cleaned = 0.00523564 Jy ! Component: 1950 - total flux cleaned = 0.00534656 Jy ! Component: 2000 - total flux cleaned = 0.00567756 Jy ! Total flux subtracted in 2048 components = 0.00571399 Jy ! Clean residual min=-0.002107 max=0.001924 Jy/beam ! Clean residual mean=0.000028 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 1.91434 Jy keep ! Adding 161 model components to the UV plane model. ! The established model now contains 299 components and 1.91434 Jy ![Exited script file: muppet] wmap "J1800+7828_X_2017_03_23_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.067 x 1.183 at -59.79 degrees (North through East) ! Clean map min=-0.0027334 max=1.5111 Jy/beam ! Writing clean map to FITS file: J1800+7828_X_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.51114 invert ! Inverting map ! Your choice of large map pixels excluded 0.0523% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000673918 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.13379 0.13379 0.267579 0.535159 1.07032 2.14064 4.28127 8.56254 17.1251 34.2502 68.5003 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.511 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.067 x 1.183 at -59.79 degrees (North through East) ! Clean map min=-0.0027334 max=1.5111 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1800+7828_X_2017_03_23_pus_uvs.log closed on Mon May 13 10:26:45 2019