! Started logfile: J1757-4149_S_2017_10_09_pus_uvs.log on Sun May 12 13:17:16 2019 obs J1757-4149_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1757-4149_S_2017_10_09_pus_uva.fits ! AN table 1: 110 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.533838 visibilities/baseline/integration-bin. ! Found source: J1757-4149 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 8456 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1757-4149_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 311 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 444 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 585 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.923270Jy sigma=0.004933 ! Fit after self-cal, rms=0.854666Jy sigma=0.004564 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.343 mas, bmaj=13.41 mas, bpa=-21.03 degrees ! Estimated noise=3924.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101525 Jy ! Component: 100 - total flux cleaned = 0.150875 Jy ! Total flux subtracted in 100 components = 0.150875 Jy ! Clean residual min=-0.016814 max=0.027334 Jy/beam ! Clean residual mean=-0.000602 rms=0.006256 Jy/beam ! Combined flux in latest and established models = 0.150875 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.150875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164481Jy sigma=0.000817 ! Fit after self-cal, rms=0.163997Jy sigma=0.000814 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=14.87 mas, bpa=-21.86 degrees ! Estimated noise=1825.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0608273 Jy ! Component: 100 - total flux cleaned = 0.095786 Jy ! Component: 150 - total flux cleaned = 0.116889 Jy ! Component: 200 - total flux cleaned = 0.129785 Jy ! Total flux subtracted in 200 components = 0.129785 Jy ! Clean residual min=-0.008900 max=0.018455 Jy/beam ! Clean residual mean=-0.000034 rms=0.003990 Jy/beam ! Combined flux in latest and established models = 0.28066 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 109 components and 0.28066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139959Jy sigma=0.000668 ! Fit after self-cal, rms=0.138825Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.25 KP 1.01 ! LA 1.01 MK 0.99 NL 1.03 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.14 KP 1.11 ! LA 0.94 MK 1.15 NL 1.99 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.99 KP 0.87 ! LA 0.74 MK 0.99 NL 1.22 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.65 KP 1.00* ! LA 1.00* MK 1.01 NL 1.00* OV 1.00* ! PT 0.99 ! ! ! Fit before self-cal, rms=0.138825Jy sigma=0.000664 ! Fit after self-cal, rms=0.141340Jy sigma=0.000637 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=14.85 mas, bpa=-21.51 degrees ! Estimated noise=1843.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.22881e-05 Jy ! Component: 100 - total flux cleaned = -6.18915e-06 Jy ! Component: 150 - total flux cleaned = -8.75226e-06 Jy ! Component: 200 - total flux cleaned = -4.35297e-05 Jy ! Total flux subtracted in 200 components = -4.35297e-05 Jy ! Clean residual min=-0.004074 max=0.004427 Jy/beam ! Clean residual mean=0.000051 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.280616 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 123 components and 0.280616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141307Jy sigma=0.000637 ! Fit after self-cal, rms=0.141766Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141766Jy sigma=0.000636 ! Fit after self-cal, rms=0.142169Jy sigma=0.000633 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=14.74 mas, bpa=-21.28 degrees ! Estimated noise=1823.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000325277 Jy ! Component: 100 - total flux cleaned = -0.000438558 Jy ! Component: 150 - total flux cleaned = -0.000541663 Jy ! Component: 200 - total flux cleaned = -0.000634775 Jy ! Total flux subtracted in 200 components = -0.000634775 Jy ! Clean residual min=-0.003704 max=0.004109 Jy/beam ! Clean residual mean=0.000054 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 0.279981 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 130 components and 0.279981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142144Jy sigma=0.000633 ! Fit after self-cal, rms=0.142279Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000313892 Jy ! Component: 100 - total flux cleaned = -0.000351773 Jy ! Component: 150 - total flux cleaned = -0.000447508 Jy ! Component: 200 - total flux cleaned = -0.000537806 Jy ! Total flux subtracted in 200 components = -0.000537806 Jy ! Clean residual min=-0.003760 max=0.004152 Jy/beam ! Clean residual mean=0.000052 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.279444 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 133 components and 0.279444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142256Jy sigma=0.000633 ! Fit after self-cal, rms=0.142298Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142298Jy sigma=0.000633 ! Fit after self-cal, rms=0.143483Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=14.69 mas, bpa=-21.27 degrees ! Estimated noise=1818.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.1615e-05 Jy ! Component: 100 - total flux cleaned = -0.000132139 Jy ! Component: 150 - total flux cleaned = -0.00023311 Jy ! Component: 200 - total flux cleaned = -0.000295428 Jy ! Total flux subtracted in 200 components = -0.000295428 Jy ! Clean residual min=-0.003671 max=0.004193 Jy/beam ! Clean residual mean=0.000048 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.279148 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 136 components and 0.279148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143458Jy sigma=0.000632 ! Fit after self-cal, rms=0.143566Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126508 Jy ! Component: 100 - total flux cleaned = -0.000254038 Jy ! Component: 150 - total flux cleaned = -0.000313223 Jy ! Component: 200 - total flux cleaned = -0.000397636 Jy ! Total flux subtracted in 200 components = -0.000397636 Jy ! Clean residual min=-0.003700 max=0.004139 Jy/beam ! Clean residual mean=0.000046 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.278751 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 141 components and 0.278751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143547Jy sigma=0.000632 ! Fit after self-cal, rms=0.143535Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143535Jy sigma=0.000632 ! Fit after self-cal, rms=0.143754Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.942 mas, bmaj=44.82 mas, bpa=-7.764 degrees ! Estimated noise=2210.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250335 Jy ! Component: 100 - total flux cleaned = -0.000191546 Jy ! Component: 150 - total flux cleaned = -0.000190739 Jy ! Component: 200 - total flux cleaned = -0.000192331 Jy ! Total flux subtracted in 200 components = -0.000192331 Jy ! Clean residual min=-0.003710 max=0.004683 Jy/beam ! Clean residual mean=0.000090 rms=0.001379 Jy/beam ! Combined flux in latest and established models = 0.278558 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 142 components and 0.278558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143747Jy sigma=0.000632 ! Fit after self-cal, rms=0.143788Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.05271e-05 Jy ! Component: 100 - total flux cleaned = -5.91522e-05 Jy ! Component: 150 - total flux cleaned = -5.86588e-05 Jy ! Component: 200 - total flux cleaned = -5.96664e-05 Jy ! Total flux subtracted in 200 components = -5.96664e-05 Jy ! Clean residual min=-0.003655 max=0.004607 Jy/beam ! Clean residual mean=0.000089 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.278499 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 142 components and 0.278499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143785Jy sigma=0.000632 ! Fit after self-cal, rms=0.143781Jy sigma=0.000632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=14.66 mas, bpa=-21.31 degrees ! Estimated noise=1815.65 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.177 x 14.66 at -21.31 degrees (North through East) ! Clean map min=-0.0035422 max=0.12255 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.374 mas, bmaj=13.31 mas, bpa=-20.7 degrees ! Estimated noise=3904.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101279 Jy ! Component: 100 - total flux cleaned = 0.152976 Jy ! Component: 150 - total flux cleaned = 0.188472 Jy ! Component: 200 - total flux cleaned = 0.213082 Jy ! Total flux subtracted in 200 components = 0.213082 Jy ! Clean residual min=-0.011820 max=0.013671 Jy/beam ! Clean residual mean=-0.000240 rms=0.003266 Jy/beam ! Combined flux in latest and established models = 0.213082 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 100 model components to the UV plane model. ! The established model now contains 100 components and 0.213082 Jy ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=14.66 mas, bpa=-21.31 degrees ! Estimated noise=1815.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279251 Jy ! Component: 100 - total flux cleaned = 0.0430544 Jy ! Component: 150 - total flux cleaned = 0.0515899 Jy ! Component: 200 - total flux cleaned = 0.0565145 Jy ! Total flux subtracted in 200 components = 0.0565145 Jy ! Clean residual min=-0.005610 max=0.005714 Jy/beam ! Clean residual mean=0.000023 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 0.269596 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 141 components and 0.269596 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.942 mas, bmaj=44.82 mas, bpa=-7.764 degrees ! Estimated noise=2210.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509416 Jy ! Component: 100 - total flux cleaned = 0.00629706 Jy ! Component: 150 - total flux cleaned = 0.00646619 Jy ! Component: 200 - total flux cleaned = 0.00656233 Jy ! Total flux subtracted in 200 components = 0.00656233 Jy ! Clean residual min=-0.004059 max=0.004431 Jy/beam ! Clean residual mean=0.000077 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.276159 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131958 Jy ! Component: 100 - total flux cleaned = 0.000250953 Jy ! Component: 150 - total flux cleaned = 0.000359824 Jy ! Component: 200 - total flux cleaned = 0.000458312 Jy ! Total flux subtracted in 200 components = 0.000458312 Jy ! Clean residual min=-0.004006 max=0.004490 Jy/beam ! Clean residual mean=0.000080 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.276617 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 154 components and 0.276617 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=14.66 mas, bpa=-21.31 degrees ! Estimated noise=1815.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000542459 Jy ! Component: 100 - total flux cleaned = -0.000702617 Jy ! Component: 150 - total flux cleaned = -0.000754775 Jy ! Component: 200 - total flux cleaned = -0.000658841 Jy ! Total flux subtracted in 200 components = -0.000658841 Jy ! Clean residual min=-0.004080 max=0.004651 Jy/beam ! Clean residual mean=0.000041 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 0.275958 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 169 components and 0.275958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143898Jy sigma=0.000633 ! Fit after self-cal, rms=0.143638Jy sigma=0.000632 wmodel J1757-4149_S_2017_10_09_pus_map.mod ! Writing 169 model components to file: J1757-4149_S_2017_10_09_pus_map.mod wobs J1757-4149_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1757-4149_S_2017_10_09_pus_uvs.fits wwins J1757-4149_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1757-4149_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000803927 Jy ! Component: 100 - total flux cleaned = 0.00106553 Jy ! Component: 150 - total flux cleaned = 0.00137029 Jy ! Component: 200 - total flux cleaned = 0.00176924 Jy ! Component: 250 - total flux cleaned = 0.00230184 Jy ! Component: 300 - total flux cleaned = 0.00290831 Jy ! Component: 350 - total flux cleaned = 0.00339011 Jy ! Component: 400 - total flux cleaned = 0.0038504 Jy ! Component: 450 - total flux cleaned = 0.00429157 Jy ! Component: 500 - total flux cleaned = 0.00463003 Jy ! Component: 550 - total flux cleaned = 0.00495398 Jy ! Component: 600 - total flux cleaned = 0.00514891 Jy ! Component: 650 - total flux cleaned = 0.00541426 Jy ! Component: 700 - total flux cleaned = 0.00552417 Jy ! Component: 750 - total flux cleaned = 0.00566865 Jy ! Component: 800 - total flux cleaned = 0.00580952 Jy ! Component: 850 - total flux cleaned = 0.00591398 Jy ! Component: 900 - total flux cleaned = 0.00601648 Jy ! Component: 950 - total flux cleaned = 0.00601614 Jy ! Component: 1000 - total flux cleaned = 0.00608283 Jy ! Component: 1050 - total flux cleaned = 0.00604993 Jy ! Component: 1100 - total flux cleaned = 0.00595158 Jy ! Component: 1150 - total flux cleaned = 0.00591919 Jy ! Component: 1200 - total flux cleaned = 0.00582309 Jy ! Component: 1250 - total flux cleaned = 0.00582264 Jy ! Component: 1300 - total flux cleaned = 0.00563184 Jy ! Component: 1350 - total flux cleaned = 0.00550499 Jy ! Component: 1400 - total flux cleaned = 0.00531531 Jy ! Component: 1450 - total flux cleaned = 0.00522047 Jy ! Component: 1500 - total flux cleaned = 0.00509433 Jy ! Component: 1550 - total flux cleaned = 0.00493634 Jy ! Component: 1600 - total flux cleaned = 0.00471425 Jy ! Component: 1650 - total flux cleaned = 0.0045232 Jy ! Component: 1700 - total flux cleaned = 0.00433148 Jy ! Component: 1750 - total flux cleaned = 0.00407451 Jy ! Component: 1800 - total flux cleaned = 0.00391283 Jy ! Component: 1850 - total flux cleaned = 0.00368558 Jy ! Component: 1900 - total flux cleaned = 0.00342411 Jy ! Component: 1950 - total flux cleaned = 0.00325948 Jy ! Component: 2000 - total flux cleaned = 0.00312665 Jy ! Component: 2050 - total flux cleaned = 0.00295976 Jy ! Component: 2100 - total flux cleaned = 0.00285851 Jy ! Component: 2150 - total flux cleaned = 0.00275614 Jy ! Component: 2200 - total flux cleaned = 0.00258427 Jy ! Component: 2250 - total flux cleaned = 0.00247917 Jy ! Component: 2300 - total flux cleaned = 0.00237319 Jy ! Component: 2350 - total flux cleaned = 0.00223008 Jy ! Component: 2400 - total flux cleaned = 0.0020855 Jy ! Component: 2450 - total flux cleaned = 0.00197565 Jy ! Component: 2500 - total flux cleaned = 0.00190127 Jy ! Component: 2550 - total flux cleaned = 0.00193885 Jy ! Component: 2600 - total flux cleaned = 0.00186234 Jy ! Component: 2650 - total flux cleaned = 0.00186215 Jy ! Component: 2700 - total flux cleaned = 0.00178298 Jy ! Component: 2750 - total flux cleaned = 0.00182323 Jy ! Component: 2800 - total flux cleaned = 0.00178146 Jy ! Component: 2850 - total flux cleaned = 0.00178172 Jy ! Component: 2900 - total flux cleaned = 0.00178197 Jy ! Component: 2950 - total flux cleaned = 0.00173884 Jy ! Component: 3000 - total flux cleaned = 0.00169439 Jy ! Component: 3050 - total flux cleaned = 0.00169431 Jy ! Component: 3100 - total flux cleaned = 0.00169448 Jy ! Component: 3150 - total flux cleaned = 0.001695 Jy ! Component: 3200 - total flux cleaned = 0.0016954 Jy ! Component: 3250 - total flux cleaned = 0.00174565 Jy ! Component: 3300 - total flux cleaned = 0.0016951 Jy ! Component: 3350 - total flux cleaned = 0.00169513 Jy ! Component: 3400 - total flux cleaned = 0.00174819 Jy ! Component: 3450 - total flux cleaned = 0.00169404 Jy ! Component: 3500 - total flux cleaned = 0.00163807 Jy ! Component: 3550 - total flux cleaned = 0.00163846 Jy ! Component: 3600 - total flux cleaned = 0.00152241 Jy ! Component: 3650 - total flux cleaned = 0.00140377 Jy ! Component: 3700 - total flux cleaned = 0.00134183 Jy ! Component: 3750 - total flux cleaned = 0.0012793 Jy ! Component: 3800 - total flux cleaned = 0.00121427 Jy ! Component: 3850 - total flux cleaned = 0.00114739 Jy ! Component: 3900 - total flux cleaned = 0.00101238 Jy ! Component: 3950 - total flux cleaned = 0.00101173 Jy ! Component: 4000 - total flux cleaned = 0.000941042 Jy ! Component: 4050 - total flux cleaned = 0.000868706 Jy ! Total flux subtracted in 4096 components = 0.000793756 Jy ! Clean residual min=-0.004142 max=0.004332 Jy/beam ! Clean residual mean=-0.000034 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 0.276752 Jy keep ! Adding 225 model components to the UV plane model. ! The established model now contains 394 components and 0.276752 Jy ![Exited script file: muppet] wmap "J1757-4149_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.177 x 14.66 at -21.31 degrees (North through East) ! Clean map min=-0.0056175 max=0.12754 Jy/beam ! Writing clean map to FITS file: J1757-4149_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.127543 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00154858 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.6425 3.6425 7.285 14.57 29.14 58.28 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.127 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.177 x 14.66 at -21.31 degrees (North through East) ! Clean map min=-0.0056175 max=0.12754 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1757-4149_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:17:21 2019