! Started logfile: J1756+1535_S_2017_09_26_pus_uvs.log on Sat May 11 13:04:13 2019 obs J1756+1535_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1756+1535_S_2017_09_26_pus_uva.fits ! AN table 1: 25 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.883333 visibilities/baseline/integration-bin. ! Found source: J1756+1535 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 3180 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1756+1535_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.862263Jy sigma=0.007638 ! Fit after self-cal, rms=0.854401Jy sigma=0.007587 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=10.48 mas, bpa=-18.6 degrees ! Estimated noise=2216.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115001 Jy ! Component: 100 - total flux cleaned = 0.140394 Jy ! Total flux subtracted in 100 components = 0.140394 Jy ! Clean residual min=-0.007937 max=0.008740 Jy/beam ! Clean residual mean=-0.000003 rms=0.002110 Jy/beam ! Combined flux in latest and established models = 0.140394 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.140394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089247Jy sigma=0.000699 ! Fit after self-cal, rms=0.089284Jy sigma=0.000698 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=11.55 mas, bpa=-20.71 degrees ! Estimated noise=1756.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111577 Jy ! Component: 100 - total flux cleaned = 0.0163757 Jy ! Component: 150 - total flux cleaned = 0.0194516 Jy ! Component: 200 - total flux cleaned = 0.0209554 Jy ! Total flux subtracted in 200 components = 0.0209554 Jy ! Clean residual min=-0.006132 max=0.005935 Jy/beam ! Clean residual mean=0.000009 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.16135 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 45 components and 0.16135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088165Jy sigma=0.000684 ! Fit after self-cal, rms=0.088190Jy sigma=0.000684 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.91 HN 0.93 KP 1.02 ! LA 1.03 MK 0.99 NL 0.93 OV 0.98 ! PT 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.97 KP 0.99 ! LA 0.95 MK 1.06 NL 1.17 OV 1.12 ! PT 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.03 KP 0.95 ! LA 0.98 MK 1.07 NL 0.94 OV 0.92 ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 0.95 KP 1.00* ! LA 1.03 MK 1.08 NL 1.00* OV 1.27 ! PT 0.98 ! ! ! Fit before self-cal, rms=0.088190Jy sigma=0.000684 ! Fit after self-cal, rms=0.089109Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=11.63 mas, bpa=-20.61 degrees ! Estimated noise=1750.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00185492 Jy ! Component: 100 - total flux cleaned = -0.00219831 Jy ! Component: 150 - total flux cleaned = -0.0023719 Jy ! Component: 200 - total flux cleaned = -0.00243257 Jy ! Total flux subtracted in 200 components = -0.00243257 Jy ! Clean residual min=-0.005357 max=0.005695 Jy/beam ! Clean residual mean=0.000011 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 0.158917 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.158917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089031Jy sigma=0.000672 ! Fit after self-cal, rms=0.089094Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089094Jy sigma=0.000672 ! Fit after self-cal, rms=0.090177Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.834 mas, bmaj=11.61 mas, bpa=-20.66 degrees ! Estimated noise=1752.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00039878 Jy ! Component: 100 - total flux cleaned = -0.000545162 Jy ! Component: 150 - total flux cleaned = -0.000637234 Jy ! Component: 200 - total flux cleaned = -0.000719562 Jy ! Total flux subtracted in 200 components = -0.000719562 Jy ! Clean residual min=-0.004345 max=0.004711 Jy/beam ! Clean residual mean=-0.000025 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.158198 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.158198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090140Jy sigma=0.000659 ! Fit after self-cal, rms=0.090241Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112675 Jy ! Component: 100 - total flux cleaned = -0.00013639 Jy ! Component: 150 - total flux cleaned = -0.000201053 Jy ! Component: 200 - total flux cleaned = -0.000259214 Jy ! Total flux subtracted in 200 components = -0.000259214 Jy ! Clean residual min=-0.004304 max=0.004700 Jy/beam ! Clean residual mean=-0.000024 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.157938 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 0.157938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090224Jy sigma=0.000659 ! Fit after self-cal, rms=0.090227Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090227Jy sigma=0.000659 ! Fit after self-cal, rms=0.090509Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=11.64 mas, bpa=-20.58 degrees ! Estimated noise=1754.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227759 Jy ! Component: 100 - total flux cleaned = -0.000313104 Jy ! Component: 150 - total flux cleaned = -0.000387461 Jy ! Component: 200 - total flux cleaned = -0.000453623 Jy ! Total flux subtracted in 200 components = -0.000453623 Jy ! Clean residual min=-0.004228 max=0.004648 Jy/beam ! Clean residual mean=-0.000025 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.157485 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 87 components and 0.157485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090483Jy sigma=0.000659 ! Fit after self-cal, rms=0.090488Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.39972e-05 Jy ! Component: 100 - total flux cleaned = -8.39561e-05 Jy ! Component: 150 - total flux cleaned = -0.000137443 Jy ! Component: 200 - total flux cleaned = -0.000154578 Jy ! Total flux subtracted in 200 components = -0.000154578 Jy ! Clean residual min=-0.004207 max=0.004636 Jy/beam ! Clean residual mean=-0.000025 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.15733 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.15733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090474Jy sigma=0.000659 ! Fit after self-cal, rms=0.090478Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090478Jy sigma=0.000659 ! Fit after self-cal, rms=0.090626Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.338 mas, bmaj=13.48 mas, bpa=-18.46 degrees ! Estimated noise=2071.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.2501e-05 Jy ! Component: 100 - total flux cleaned = -2.66257e-05 Jy ! Component: 150 - total flux cleaned = -0.000100035 Jy ! Component: 200 - total flux cleaned = -9.99728e-05 Jy ! Total flux subtracted in 200 components = -9.99728e-05 Jy ! Clean residual min=-0.004197 max=0.005006 Jy/beam ! Clean residual mean=-0.000046 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.15723 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 99 components and 0.15723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090603Jy sigma=0.000659 ! Fit after self-cal, rms=0.090609Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.91508e-05 Jy ! Component: 100 - total flux cleaned = -8.8748e-05 Jy ! Component: 150 - total flux cleaned = -0.000107121 Jy ! Component: 200 - total flux cleaned = -0.00010741 Jy ! Total flux subtracted in 200 components = -0.00010741 Jy ! Clean residual min=-0.004209 max=0.004936 Jy/beam ! Clean residual mean=-0.000046 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.157123 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 100 components and 0.157123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090605Jy sigma=0.000659 ! Fit after self-cal, rms=0.090608Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.853 mas, bmaj=11.66 mas, bpa=-20.51 degrees ! Estimated noise=1755.82 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.853 x 11.66 at -20.51 degrees (North through East) ! Clean map min=-0.0040408 max=0.15001 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=10.53 mas, bpa=-18.6 degrees ! Estimated noise=2241.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115936 Jy ! Component: 100 - total flux cleaned = 0.14153 Jy ! Component: 150 - total flux cleaned = 0.148617 Jy ! Component: 200 - total flux cleaned = 0.152678 Jy ! Total flux subtracted in 200 components = 0.152678 Jy ! Clean residual min=-0.005932 max=0.005886 Jy/beam ! Clean residual mean=-0.000020 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 0.152678 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.152678 Jy ! Inverting map and beam ! Estimated beam: bmin=3.853 mas, bmaj=11.66 mas, bpa=-20.51 degrees ! Estimated noise=1755.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301577 Jy ! Component: 100 - total flux cleaned = 0.00372062 Jy ! Component: 150 - total flux cleaned = 0.00390977 Jy ! Component: 200 - total flux cleaned = 0.00406452 Jy ! Total flux subtracted in 200 components = 0.00406452 Jy ! Clean residual min=-0.004252 max=0.004702 Jy/beam ! Clean residual mean=-0.000025 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.156743 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 44 components and 0.156743 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.338 mas, bmaj=13.48 mas, bpa=-18.46 degrees ! Estimated noise=2071.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000400719 Jy ! Component: 100 - total flux cleaned = 0.000531349 Jy ! Component: 150 - total flux cleaned = 0.000566605 Jy ! Component: 200 - total flux cleaned = 0.000566999 Jy ! Total flux subtracted in 200 components = 0.000566999 Jy ! Clean residual min=-0.004251 max=0.005058 Jy/beam ! Clean residual mean=-0.000046 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.15731 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.04616e-05 Jy ! Component: 100 - total flux cleaned = 2.96367e-05 Jy ! Component: 150 - total flux cleaned = 2.98455e-05 Jy ! Component: 200 - total flux cleaned = 2.93026e-05 Jy ! Total flux subtracted in 200 components = 2.93026e-05 Jy ! Clean residual min=-0.004237 max=0.005028 Jy/beam ! Clean residual mean=-0.000045 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.157339 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.157339 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.853 mas, bmaj=11.66 mas, bpa=-20.51 degrees ! Estimated noise=1755.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165593 Jy ! Component: 100 - total flux cleaned = -0.000196894 Jy ! Component: 150 - total flux cleaned = -0.000122817 Jy ! Component: 200 - total flux cleaned = -7.82517e-05 Jy ! Total flux subtracted in 200 components = -7.82517e-05 Jy ! Clean residual min=-0.004133 max=0.004680 Jy/beam ! Clean residual mean=-0.000025 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.157261 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.157261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090649Jy sigma=0.000659 ! Fit after self-cal, rms=0.090649Jy sigma=0.000659 wmodel J1756+1535_S_2017_09_26_pus_map.mod ! Writing 65 model components to file: J1756+1535_S_2017_09_26_pus_map.mod wobs J1756+1535_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1756+1535_S_2017_09_26_pus_uvs.fits wwins J1756+1535_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1756+1535_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131715 Jy ! Component: 100 - total flux cleaned = 0.00175425 Jy ! Component: 150 - total flux cleaned = 0.00195988 Jy ! Component: 200 - total flux cleaned = 0.00215694 Jy ! Component: 250 - total flux cleaned = 0.00209145 Jy ! Component: 300 - total flux cleaned = 0.00220984 Jy ! Component: 350 - total flux cleaned = 0.00215024 Jy ! Component: 400 - total flux cleaned = 0.00226365 Jy ! Component: 450 - total flux cleaned = 0.00248341 Jy ! Component: 500 - total flux cleaned = 0.00253762 Jy ! Component: 550 - total flux cleaned = 0.00269296 Jy ! Component: 600 - total flux cleaned = 0.00269252 Jy ! Component: 650 - total flux cleaned = 0.00284053 Jy ! Component: 700 - total flux cleaned = 0.003222 Jy ! Component: 750 - total flux cleaned = 0.00345401 Jy ! Component: 800 - total flux cleaned = 0.00363538 Jy ! Component: 850 - total flux cleaned = 0.00372301 Jy ! Component: 900 - total flux cleaned = 0.00372268 Jy ! Component: 950 - total flux cleaned = 0.00380841 Jy ! Component: 1000 - total flux cleaned = 0.00397518 Jy ! Component: 1050 - total flux cleaned = 0.00397495 Jy ! Component: 1100 - total flux cleaned = 0.00413622 Jy ! Component: 1150 - total flux cleaned = 0.00433423 Jy ! Component: 1200 - total flux cleaned = 0.00452907 Jy ! Component: 1250 - total flux cleaned = 0.00468113 Jy ! Component: 1300 - total flux cleaned = 0.00471869 Jy ! Component: 1350 - total flux cleaned = 0.00482986 Jy ! Component: 1400 - total flux cleaned = 0.0047932 Jy ! Component: 1450 - total flux cleaned = 0.00472199 Jy ! Component: 1500 - total flux cleaned = 0.00482779 Jy ! Component: 1550 - total flux cleaned = 0.00475731 Jy ! Component: 1600 - total flux cleaned = 0.00458498 Jy ! Component: 1650 - total flux cleaned = 0.00455221 Jy ! Component: 1700 - total flux cleaned = 0.00458555 Jy ! Component: 1750 - total flux cleaned = 0.00448595 Jy ! Component: 1800 - total flux cleaned = 0.00435503 Jy ! Component: 1850 - total flux cleaned = 0.00425817 Jy ! Component: 1900 - total flux cleaned = 0.00428985 Jy ! Component: 1950 - total flux cleaned = 0.00416344 Jy ! Component: 2000 - total flux cleaned = 0.00406986 Jy ! Component: 2050 - total flux cleaned = 0.00403924 Jy ! Component: 2100 - total flux cleaned = 0.00397835 Jy ! Component: 2150 - total flux cleaned = 0.00397883 Jy ! Component: 2200 - total flux cleaned = 0.00394908 Jy ! Component: 2250 - total flux cleaned = 0.00397868 Jy ! Component: 2300 - total flux cleaned = 0.00394884 Jy ! Component: 2350 - total flux cleaned = 0.00394874 Jy ! Component: 2400 - total flux cleaned = 0.00386216 Jy ! Component: 2450 - total flux cleaned = 0.00389055 Jy ! Component: 2500 - total flux cleaned = 0.00397543 Jy ! Component: 2550 - total flux cleaned = 0.00386286 Jy ! Component: 2600 - total flux cleaned = 0.00391859 Jy ! Component: 2650 - total flux cleaned = 0.00391856 Jy ! Component: 2700 - total flux cleaned = 0.00386384 Jy ! Component: 2750 - total flux cleaned = 0.00386393 Jy ! Component: 2800 - total flux cleaned = 0.00386405 Jy ! Component: 2850 - total flux cleaned = 0.00381038 Jy ! Component: 2900 - total flux cleaned = 0.00375726 Jy ! Component: 2950 - total flux cleaned = 0.00367837 Jy ! Component: 3000 - total flux cleaned = 0.00367818 Jy ! Component: 3050 - total flux cleaned = 0.00362624 Jy ! Component: 3100 - total flux cleaned = 0.00360057 Jy ! Component: 3150 - total flux cleaned = 0.00362642 Jy ! Component: 3200 - total flux cleaned = 0.00360095 Jy ! Component: 3250 - total flux cleaned = 0.00367717 Jy ! Component: 3300 - total flux cleaned = 0.0036769 Jy ! Component: 3350 - total flux cleaned = 0.00360145 Jy ! Component: 3400 - total flux cleaned = 0.00362632 Jy ! Component: 3450 - total flux cleaned = 0.00357647 Jy ! Component: 3500 - total flux cleaned = 0.0036013 Jy ! Component: 3550 - total flux cleaned = 0.00352759 Jy ! Component: 3600 - total flux cleaned = 0.00350315 Jy ! Component: 3650 - total flux cleaned = 0.00350335 Jy ! Component: 3700 - total flux cleaned = 0.00345474 Jy ! Component: 3750 - total flux cleaned = 0.00343058 Jy ! Component: 3800 - total flux cleaned = 0.00338269 Jy ! Component: 3850 - total flux cleaned = 0.0034066 Jy ! Component: 3900 - total flux cleaned = 0.00340647 Jy ! Component: 3950 - total flux cleaned = 0.0033827 Jy ! Component: 4000 - total flux cleaned = 0.00333569 Jy ! Component: 4050 - total flux cleaned = 0.0033124 Jy ! Total flux subtracted in 4096 components = 0.00326575 Jy ! Clean residual min=-0.001301 max=0.001232 Jy/beam ! Clean residual mean=-0.000012 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.160526 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 318 components and 0.160527 Jy ![Exited script file: muppet] wmap "J1756+1535_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.853 x 11.66 at -20.51 degrees (North through East) ! Clean map min=-0.0029903 max=0.1502 Jy/beam ! Writing clean map to FITS file: J1756+1535_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.150202 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000416264 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.831407 0.831407 1.66281 3.32563 6.65125 13.3025 26.605 53.21 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.15 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.853 x 11.66 at -20.51 degrees (North through East) ! Clean map min=-0.0029903 max=0.1502 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1756+1535_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:04:17 2019