! Started logfile: J1756+1535_S_2017_01_21_pus_uvs.log on Sun May 5 16:00:03 2019 obs J1756+1535_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1756+1535_S_2017_01_21_pus_uva.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.671875 visibilities/baseline/integration-bin. ! Found source: J1756+1535 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 1548 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1756+1535_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.910753Jy sigma=0.006385 ! Fit after self-cal, rms=0.872411Jy sigma=0.006248 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.678 mas, bmaj=5.746 mas, bpa=-6.408 degrees ! Estimated noise=3326.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113382 Jy ! Component: 100 - total flux cleaned = 0.13826 Jy ! Total flux subtracted in 100 components = 0.13826 Jy ! Clean residual min=-0.010693 max=0.013865 Jy/beam ! Clean residual mean=-0.000026 rms=0.002673 Jy/beam ! Combined flux in latest and established models = 0.13826 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.13826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116019Jy sigma=0.000668 ! Fit after self-cal, rms=0.116064Jy sigma=0.000668 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=6.405 mas, bpa=-3.228 degrees ! Estimated noise=2759.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195945 Jy ! Component: 100 - total flux cleaned = 0.0014781 Jy ! Component: 150 - total flux cleaned = 0.000958512 Jy ! Component: 200 - total flux cleaned = 0.000320916 Jy ! Total flux subtracted in 200 components = 0.000320916 Jy ! Clean residual min=-0.011336 max=0.011991 Jy/beam ! Clean residual mean=-0.000074 rms=0.002669 Jy/beam ! Combined flux in latest and established models = 0.138581 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.138581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115964Jy sigma=0.000665 ! Fit after self-cal, rms=0.115959Jy sigma=0.000665 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.93 LA 0.94 ! MK 0.96 NL 0.97 OV 1.65 PT 0.93 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.90 LA 0.95 ! MK 1.03 NL 0.96 OV 1.86 PT 0.91 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.89 LA 0.96 ! MK 1.04 NL 1.10 OV 1.64 PT 0.92 ! SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.90 LA 0.93 ! MK 1.02 NL 1.00* OV 1.45 PT 0.93 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.115959Jy sigma=0.000665 ! Fit after self-cal, rms=0.152192Jy sigma=0.000644 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=6.363 mas, bpa=-3.225 degrees ! Estimated noise=2733.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000615192 Jy ! Component: 100 - total flux cleaned = 0.000681937 Jy ! Component: 150 - total flux cleaned = 0.000633284 Jy ! Component: 200 - total flux cleaned = 0.00051885 Jy ! Total flux subtracted in 200 components = 0.00051885 Jy ! Clean residual min=-0.008872 max=0.007831 Jy/beam ! Clean residual mean=-0.000025 rms=0.001953 Jy/beam ! Combined flux in latest and established models = 0.1391 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 0.1391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152114Jy sigma=0.000644 ! Fit after self-cal, rms=0.152879Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152879Jy sigma=0.000643 ! Fit after self-cal, rms=0.157820Jy sigma=0.000636 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=6.361 mas, bpa=-2.96 degrees ! Estimated noise=2737.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183015 Jy ! Component: 100 - total flux cleaned = 0.000272783 Jy ! Component: 150 - total flux cleaned = 0.00033984 Jy ! Component: 200 - total flux cleaned = 0.000393893 Jy ! Total flux subtracted in 200 components = 0.000393893 Jy ! Clean residual min=-0.007281 max=0.007313 Jy/beam ! Clean residual mean=-0.000035 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 0.139494 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.139494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157762Jy sigma=0.000636 ! Fit after self-cal, rms=0.157926Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.47486e-05 Jy ! Component: 100 - total flux cleaned = -3.91181e-05 Jy ! Component: 150 - total flux cleaned = -9.96831e-06 Jy ! Component: 200 - total flux cleaned = 1.2739e-05 Jy ! Total flux subtracted in 200 components = 1.2739e-05 Jy ! Clean residual min=-0.007504 max=0.007380 Jy/beam ! Clean residual mean=-0.000036 rms=0.001780 Jy/beam ! Combined flux in latest and established models = 0.139506 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.139506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157883Jy sigma=0.000636 ! Fit after self-cal, rms=0.157901Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157901Jy sigma=0.000636 ! Fit after self-cal, rms=0.158092Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=6.354 mas, bpa=-2.882 degrees ! Estimated noise=2733.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.27894e-05 Jy ! Component: 100 - total flux cleaned = 0.00010431 Jy ! Component: 150 - total flux cleaned = 0.000105461 Jy ! Component: 200 - total flux cleaned = 0.000126506 Jy ! Total flux subtracted in 200 components = 0.000126506 Jy ! Clean residual min=-0.007450 max=0.007330 Jy/beam ! Clean residual mean=-0.000035 rms=0.001777 Jy/beam ! Combined flux in latest and established models = 0.139633 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 37 components and 0.139633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158060Jy sigma=0.000636 ! Fit after self-cal, rms=0.158075Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.70527e-05 Jy ! Component: 100 - total flux cleaned = 1.87279e-05 Jy ! Component: 150 - total flux cleaned = 2.02503e-05 Jy ! Component: 200 - total flux cleaned = 3.70597e-06 Jy ! Total flux subtracted in 200 components = 3.70597e-06 Jy ! Clean residual min=-0.007453 max=0.007340 Jy/beam ! Clean residual mean=-0.000035 rms=0.001776 Jy/beam ! Combined flux in latest and established models = 0.139637 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.139637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158049Jy sigma=0.000636 ! Fit after self-cal, rms=0.158065Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158065Jy sigma=0.000636 ! Fit after self-cal, rms=0.157996Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.537 mas, bmaj=9.778 mas, bpa=2.119 degrees ! Estimated noise=3732.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000309214 Jy ! Component: 100 - total flux cleaned = 0.000373706 Jy ! Component: 150 - total flux cleaned = 0.000460958 Jy ! Component: 200 - total flux cleaned = 0.000539015 Jy ! Total flux subtracted in 200 components = 0.000539015 Jy ! Clean residual min=-0.009619 max=0.010041 Jy/beam ! Clean residual mean=-0.000084 rms=0.002489 Jy/beam ! Combined flux in latest and established models = 0.140176 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.140176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157967Jy sigma=0.000636 ! Fit after self-cal, rms=0.157986Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100821 Jy ! Component: 100 - total flux cleaned = 0.000148303 Jy ! Component: 150 - total flux cleaned = 0.000230106 Jy ! Component: 200 - total flux cleaned = 0.000267313 Jy ! Total flux subtracted in 200 components = 0.000267313 Jy ! Clean residual min=-0.009572 max=0.009978 Jy/beam ! Clean residual mean=-0.000083 rms=0.002485 Jy/beam ! Combined flux in latest and established models = 0.140443 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.140443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157970Jy sigma=0.000636 ! Fit after self-cal, rms=0.157984Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=6.348 mas, bpa=-2.835 degrees ! Estimated noise=2730.14 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.13 x 6.348 at -2.835 degrees (North through East) ! Clean map min=-0.007258 max=0.14112 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.685 mas, bmaj=5.731 mas, bpa=-6.287 degrees ! Estimated noise=3238.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110139 Jy ! Component: 100 - total flux cleaned = 0.135443 Jy ! Component: 150 - total flux cleaned = 0.141753 Jy ! Component: 200 - total flux cleaned = 0.141793 Jy ! Total flux subtracted in 200 components = 0.141793 Jy ! Clean residual min=-0.008472 max=0.007542 Jy/beam ! Clean residual mean=-0.000013 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.141793 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.141793 Jy ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=6.348 mas, bpa=-2.835 degrees ! Estimated noise=2730.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142407 Jy ! Component: 100 - total flux cleaned = -0.00184517 Jy ! Component: 150 - total flux cleaned = -0.00204811 Jy ! Component: 200 - total flux cleaned = -0.0022215 Jy ! Total flux subtracted in 200 components = -0.0022215 Jy ! Clean residual min=-0.007744 max=0.007203 Jy/beam ! Clean residual mean=-0.000036 rms=0.001785 Jy/beam ! Combined flux in latest and established models = 0.139571 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.139571 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.537 mas, bmaj=9.778 mas, bpa=2.119 degrees ! Estimated noise=3732.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000767117 Jy ! Component: 100 - total flux cleaned = 0.000769816 Jy ! Component: 150 - total flux cleaned = 0.000717572 Jy ! Component: 200 - total flux cleaned = 0.000784133 Jy ! Total flux subtracted in 200 components = 0.000784133 Jy ! Clean residual min=-0.009606 max=0.010037 Jy/beam ! Clean residual mean=-0.000083 rms=0.002486 Jy/beam ! Combined flux in latest and established models = 0.140355 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.93039e-05 Jy ! Component: 100 - total flux cleaned = 7.57837e-05 Jy ! Component: 150 - total flux cleaned = 0.000126307 Jy ! Component: 200 - total flux cleaned = 0.00015789 Jy ! Total flux subtracted in 200 components = 0.00015789 Jy ! Clean residual min=-0.009569 max=0.010003 Jy/beam ! Clean residual mean=-0.000082 rms=0.002484 Jy/beam ! Combined flux in latest and established models = 0.140513 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.140513 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=6.348 mas, bpa=-2.835 degrees ! Estimated noise=2730.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.53661e-05 Jy ! Component: 100 - total flux cleaned = -0.000399683 Jy ! Component: 150 - total flux cleaned = -0.000554792 Jy ! Component: 200 - total flux cleaned = -0.000690385 Jy ! Total flux subtracted in 200 components = -0.000690385 Jy ! Clean residual min=-0.007645 max=0.007222 Jy/beam ! Clean residual mean=-0.000035 rms=0.001781 Jy/beam ! Combined flux in latest and established models = 0.139823 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.139823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157989Jy sigma=0.000636 ! Fit after self-cal, rms=0.158033Jy sigma=0.000636 wmodel J1756+1535_S_2017_01_21_pus_map.mod ! Writing 37 model components to file: J1756+1535_S_2017_01_21_pus_map.mod wobs J1756+1535_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1756+1535_S_2017_01_21_pus_uvs.fits wwins J1756+1535_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1756+1535_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00207521 Jy ! Component: 100 - total flux cleaned = -0.00418064 Jy ! Component: 150 - total flux cleaned = -0.0053368 Jy ! Component: 200 - total flux cleaned = -0.0063109 Jy ! Component: 250 - total flux cleaned = -0.00692408 Jy ! Component: 300 - total flux cleaned = -0.00712119 Jy ! Component: 350 - total flux cleaned = -0.0074982 Jy ! Component: 400 - total flux cleaned = -0.00777104 Jy ! Component: 450 - total flux cleaned = -0.00803828 Jy ! Component: 500 - total flux cleaned = -0.00829663 Jy ! Component: 550 - total flux cleaned = -0.00846491 Jy ! Component: 600 - total flux cleaned = -0.00854696 Jy ! Component: 650 - total flux cleaned = -0.00862781 Jy ! Component: 700 - total flux cleaned = -0.00862845 Jy ! Component: 750 - total flux cleaned = -0.00870431 Jy ! Component: 800 - total flux cleaned = -0.00870526 Jy ! Component: 850 - total flux cleaned = -0.00885184 Jy ! Component: 900 - total flux cleaned = -0.00892435 Jy ! Component: 950 - total flux cleaned = -0.00920871 Jy ! Component: 1000 - total flux cleaned = -0.0094167 Jy ! Component: 1050 - total flux cleaned = -0.00968888 Jy ! Component: 1100 - total flux cleaned = -0.00982204 Jy ! Component: 1150 - total flux cleaned = -0.0100184 Jy ! Component: 1200 - total flux cleaned = -0.0102123 Jy ! Component: 1250 - total flux cleaned = -0.0102756 Jy ! Component: 1300 - total flux cleaned = -0.0103387 Jy ! Component: 1350 - total flux cleaned = -0.0104633 Jy ! Component: 1400 - total flux cleaned = -0.0103403 Jy ! Component: 1450 - total flux cleaned = -0.0101596 Jy ! Component: 1500 - total flux cleaned = -0.0103379 Jy ! Component: 1550 - total flux cleaned = -0.0102204 Jy ! Component: 1600 - total flux cleaned = -0.0101635 Jy ! Component: 1650 - total flux cleaned = -0.010107 Jy ! Component: 1700 - total flux cleaned = -0.010107 Jy ! Component: 1750 - total flux cleaned = -0.0102734 Jy ! Component: 1800 - total flux cleaned = -0.0101629 Jy ! Component: 1850 - total flux cleaned = -0.0103262 Jy ! Component: 1900 - total flux cleaned = -0.0103807 Jy ! Component: 1950 - total flux cleaned = -0.010434 Jy ! Component: 2000 - total flux cleaned = -0.010696 Jy ! Component: 2050 - total flux cleaned = -0.0108003 Jy ! Component: 2100 - total flux cleaned = -0.0110569 Jy ! Component: 2150 - total flux cleaned = -0.0111578 Jy ! Component: 2200 - total flux cleaned = -0.0111584 Jy ! Component: 2250 - total flux cleaned = -0.0114062 Jy ! Component: 2300 - total flux cleaned = -0.0114554 Jy ! Component: 2350 - total flux cleaned = -0.011553 Jy ! Component: 2400 - total flux cleaned = -0.0116974 Jy ! Component: 2450 - total flux cleaned = -0.0117454 Jy ! Component: 2500 - total flux cleaned = -0.011935 Jy ! Component: 2550 - total flux cleaned = -0.0118883 Jy ! Component: 2600 - total flux cleaned = -0.0121205 Jy ! Component: 2650 - total flux cleaned = -0.0121203 Jy ! Component: 2700 - total flux cleaned = -0.0123017 Jy ! Component: 2750 - total flux cleaned = -0.0124365 Jy ! Component: 2800 - total flux cleaned = -0.0125263 Jy ! Component: 2850 - total flux cleaned = -0.0125711 Jy ! Component: 2900 - total flux cleaned = -0.012747 Jy ! Component: 2950 - total flux cleaned = -0.0127469 Jy ! Component: 3000 - total flux cleaned = -0.0128332 Jy ! Component: 3050 - total flux cleaned = -0.0129188 Jy ! Component: 3100 - total flux cleaned = -0.0129619 Jy ! Component: 3150 - total flux cleaned = -0.0130887 Jy ! Component: 3200 - total flux cleaned = -0.0131732 Jy ! Component: 3250 - total flux cleaned = -0.0131732 Jy ! Component: 3300 - total flux cleaned = -0.0132562 Jy ! Component: 3350 - total flux cleaned = -0.0132564 Jy ! Component: 3400 - total flux cleaned = -0.0132568 Jy ! Component: 3450 - total flux cleaned = -0.0132974 Jy ! Component: 3500 - total flux cleaned = -0.0132564 Jy ! Component: 3550 - total flux cleaned = -0.0132562 Jy ! Component: 3600 - total flux cleaned = -0.013057 Jy ! Component: 3650 - total flux cleaned = -0.0130176 Jy ! Component: 3700 - total flux cleaned = -0.0130176 Jy ! Component: 3750 - total flux cleaned = -0.0129395 Jy ! Component: 3800 - total flux cleaned = -0.0129006 Jy ! Component: 3850 - total flux cleaned = -0.0128232 Jy ! Component: 3900 - total flux cleaned = -0.0128231 Jy ! Component: 3950 - total flux cleaned = -0.0126701 Jy ! Component: 4000 - total flux cleaned = -0.0125943 Jy ! Component: 4050 - total flux cleaned = -0.0125939 Jy ! Total flux subtracted in 4096 components = -0.012519 Jy ! Clean residual min=-0.002101 max=0.002541 Jy/beam ! Clean residual mean=-0.000014 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.127304 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 348 components and 0.127304 Jy ![Exited script file: muppet] wmap "J1756+1535_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.13 x 6.348 at -2.835 degrees (North through East) ! Clean map min=-0.0055272 max=0.14046 Jy/beam ! Writing clean map to FITS file: J1756+1535_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.140463 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000722613 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.54335 1.54335 3.0867 6.1734 12.3468 24.6936 49.3872 98.7743 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.14 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.13 x 6.348 at -2.835 degrees (North through East) ! Clean map min=-0.0055272 max=0.14046 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1756+1535_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:00:07 2019