! Started logfile: J1756+1535_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:19:58 2019 obs J1756+1535_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1756+1535_S_2017_01_16_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.222222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1756+1535 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1756+1535_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.943951Jy sigma=0.005680 ! Fit after self-cal, rms=0.871802Jy sigma=0.005469 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=15.68 mas, bpa=25.32 degrees ! Estimated noise=8372.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108119 Jy ! Component: 100 - total flux cleaned = 0.118901 Jy ! Total flux subtracted in 100 components = 0.118901 Jy ! Clean residual min=-0.014590 max=0.014561 Jy/beam ! Clean residual mean=0.000051 rms=0.005037 Jy/beam ! Combined flux in latest and established models = 0.118901 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.118901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193943Jy sigma=0.000614 ! Fit after self-cal, rms=0.194163Jy sigma=0.000613 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.466 mas, bmaj=15.45 mas, bpa=25.18 degrees ! Estimated noise=7035.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0073006 Jy ! Component: 100 - total flux cleaned = 0.0180904 Jy ! Component: 150 - total flux cleaned = 0.0230942 Jy ! Component: 200 - total flux cleaned = 0.0277249 Jy ! Total flux subtracted in 200 components = 0.0277249 Jy ! Clean residual min=-0.006821 max=0.006798 Jy/beam ! Clean residual mean=-0.000030 rms=0.002308 Jy/beam ! Combined flux in latest and established models = 0.146626 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 63 components and 0.146626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189648Jy sigma=0.000595 ! Fit after self-cal, rms=0.189419Jy sigma=0.000593 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.00* KP 1.00* ! LA 0.89 MK 1.00* NL 0.89 OV 1.00* ! PT 1.04 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.00* KP 1.00* ! LA 1.01 MK 1.00* NL 1.03 OV 1.00* ! PT 1.12 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.00* HN 1.00* KP 1.00* ! LA 1.05 MK 1.00* NL 1.11 OV 1.00* ! PT 0.91 SC 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 1.00* KP 1.00* ! LA 0.79 MK 1.00* NL 1.00* OV 1.00* ! PT 1.09 SC 0.55 ! ! ! Fit before self-cal, rms=0.189419Jy sigma=0.000593 ! Fit after self-cal, rms=0.118906Jy sigma=0.000576 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.392 mas, bmaj=15.71 mas, bpa=25.15 degrees ! Estimated noise=6821.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151507 Jy ! Component: 100 - total flux cleaned = -0.00107816 Jy ! Component: 150 - total flux cleaned = -0.000677161 Jy ! Component: 200 - total flux cleaned = -0.00121085 Jy ! Total flux subtracted in 200 components = -0.00121085 Jy ! Clean residual min=-0.002961 max=0.002982 Jy/beam ! Clean residual mean=-0.000006 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.145415 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 106 components and 0.145415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118171Jy sigma=0.000572 ! Fit after self-cal, rms=0.117630Jy sigma=0.000571 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117630Jy sigma=0.000571 ! Fit after self-cal, rms=0.116034Jy sigma=0.000570 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.397 mas, bmaj=15.73 mas, bpa=25.15 degrees ! Estimated noise=6824.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223894 Jy ! Component: 100 - total flux cleaned = 0.0014125 Jy ! Component: 150 - total flux cleaned = 0.00101575 Jy ! Component: 200 - total flux cleaned = 0.000385944 Jy ! Total flux subtracted in 200 components = 0.000385944 Jy ! Clean residual min=-0.002056 max=0.002057 Jy/beam ! Clean residual mean=-0.000010 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.145801 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 136 components and 0.145801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115642Jy sigma=0.000569 ! Fit after self-cal, rms=0.115495Jy sigma=0.000568 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000777108 Jy ! Component: 100 - total flux cleaned = 0.00155568 Jy ! Component: 150 - total flux cleaned = 0.00225091 Jy ! Component: 200 - total flux cleaned = 0.00257242 Jy ! Total flux subtracted in 200 components = 0.00257242 Jy ! Clean residual min=-0.001270 max=0.001272 Jy/beam ! Clean residual mean=0.000004 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.148373 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 177 components and 0.148373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115307Jy sigma=0.000568 ! Fit after self-cal, rms=0.115233Jy sigma=0.000567 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115233Jy sigma=0.000567 ! Fit after self-cal, rms=0.113463Jy sigma=0.000567 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.407 mas, bmaj=15.72 mas, bpa=25.15 degrees ! Estimated noise=6821.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000702691 Jy ! Component: 100 - total flux cleaned = 0.000861723 Jy ! Component: 150 - total flux cleaned = 0.000713842 Jy ! Component: 200 - total flux cleaned = 0.000640363 Jy ! Total flux subtracted in 200 components = 0.000640363 Jy ! Clean residual min=-0.001173 max=0.001180 Jy/beam ! Clean residual mean=-0.000013 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.149014 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 204 components and 0.149014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113326Jy sigma=0.000567 ! Fit after self-cal, rms=0.113074Jy sigma=0.000567 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.04533e-05 Jy ! Component: 100 - total flux cleaned = -1.70133e-05 Jy ! Component: 150 - total flux cleaned = 0.00016502 Jy ! Component: 200 - total flux cleaned = 0.000280264 Jy ! Total flux subtracted in 200 components = 0.000280264 Jy ! Clean residual min=-0.000948 max=0.000963 Jy/beam ! Clean residual mean=0.000001 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.149294 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 238 components and 0.149294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112979Jy sigma=0.000566 ! Fit after self-cal, rms=0.112870Jy sigma=0.000566 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112870Jy sigma=0.000566 ! Fit after self-cal, rms=0.111291Jy sigma=0.000566 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.397 mas, bmaj=14.1 mas, bpa=25.56 degrees ! Estimated noise=7444.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.65338e-05 Jy ! Component: 100 - total flux cleaned = -0.00013493 Jy ! Component: 150 - total flux cleaned = -0.000253043 Jy ! Component: 200 - total flux cleaned = -0.000434034 Jy ! Total flux subtracted in 200 components = -0.000434034 Jy ! Clean residual min=-0.000998 max=0.001009 Jy/beam ! Clean residual mean=-0.000012 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.14886 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 265 components and 0.14886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111232Jy sigma=0.000566 ! Fit after self-cal, rms=0.111013Jy sigma=0.000566 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122928 Jy ! Component: 100 - total flux cleaned = 0.000383888 Jy ! Component: 150 - total flux cleaned = 0.000759912 Jy ! Component: 200 - total flux cleaned = 0.000969077 Jy ! Total flux subtracted in 200 components = 0.000969077 Jy ! Clean residual min=-0.000698 max=0.000699 Jy/beam ! Clean residual mean=0.000008 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.149829 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 297 components and 0.149829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110970Jy sigma=0.000566 ! Fit after self-cal, rms=0.110899Jy sigma=0.000566 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.416 mas, bmaj=15.72 mas, bpa=25.14 degrees ! Estimated noise=6800.58 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.416 x 15.72 at 25.14 degrees (North through East) ! Clean map min=-0.012008 max=0.12138 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.791 mas, bmaj=16.06 mas, bpa=25.24 degrees ! Estimated noise=7967.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102322 Jy ! Component: 100 - total flux cleaned = 0.106577 Jy ! Component: 150 - total flux cleaned = 0.114072 Jy ! Component: 200 - total flux cleaned = 0.116715 Jy ! Total flux subtracted in 200 components = 0.116715 Jy ! Clean residual min=-0.007628 max=0.007659 Jy/beam ! Clean residual mean=0.000028 rms=0.002823 Jy/beam ! Combined flux in latest and established models = 0.116715 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.116715 Jy ! Inverting map and beam ! Estimated beam: bmin=4.416 mas, bmaj=15.72 mas, bpa=25.14 degrees ! Estimated noise=6800.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150634 Jy ! Component: 100 - total flux cleaned = -0.000746846 Jy ! Component: 150 - total flux cleaned = -0.00108154 Jy ! Component: 200 - total flux cleaned = -0.000778163 Jy ! Total flux subtracted in 200 components = -0.000778163 Jy ! Clean residual min=-0.004870 max=0.004888 Jy/beam ! Clean residual mean=-0.000069 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 0.115937 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 89 components and 0.115937 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.397 mas, bmaj=14.1 mas, bpa=25.56 degrees ! Estimated noise=7444.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168255 Jy ! Component: 100 - total flux cleaned = -0.00281813 Jy ! Component: 150 - total flux cleaned = -0.00413775 Jy ! Component: 200 - total flux cleaned = -0.00428267 Jy ! Total flux subtracted in 200 components = -0.00428267 Jy ! Clean residual min=-0.002318 max=0.002298 Jy/beam ! Clean residual mean=-0.000001 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.111654 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282469 Jy ! Component: 100 - total flux cleaned = 0.000853673 Jy ! Component: 150 - total flux cleaned = 0.00114345 Jy ! Component: 200 - total flux cleaned = 0.00159527 Jy ! Total flux subtracted in 200 components = 0.00159527 Jy ! Clean residual min=-0.002635 max=0.002626 Jy/beam ! Clean residual mean=-0.000034 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.113249 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 157 components and 0.113249 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.416 mas, bmaj=15.72 mas, bpa=25.14 degrees ! Estimated noise=6800.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126594 Jy ! Component: 100 - total flux cleaned = 0.00192816 Jy ! Component: 150 - total flux cleaned = 0.00253024 Jy ! Component: 200 - total flux cleaned = 0.00262568 Jy ! Total flux subtracted in 200 components = 0.00262568 Jy ! Clean residual min=-0.001543 max=0.001549 Jy/beam ! Clean residual mean=0.000004 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.115875 Jy selfcal ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 212 components and 0.115875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111171Jy sigma=0.000567 ! Fit after self-cal, rms=0.110941Jy sigma=0.000567 wmodel J1756+1535_S_2017_01_16_pus_map.mod ! Writing 212 model components to file: J1756+1535_S_2017_01_16_pus_map.mod wobs J1756+1535_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1756+1535_S_2017_01_16_pus_uvs.fits wwins J1756+1535_S_2017_01_16_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1756+1535_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.416 x 15.72 at 25.14 degrees (North through East) ! Clean map min=-0.012638 max=0.11655 Jy/beam ! Writing clean map to FITS file: J1756+1535_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116549 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000506309 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.30325 1.30325 2.6065 5.213 10.426 20.852 41.704 83.4079 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.416 x 15.72 at 25.14 degrees (North through East) ! Clean map min=-0.012638 max=0.11655 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1756+1535_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:20:01 2019