! Started logfile: J1755-2232_S_2017_06_10_pus_uvs.log on Mon May 6 14:59:22 2019 obs J1755-2232_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1755-2232_S_2017_06_10_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.593912 visibilities/baseline/integration-bin. ! Found source: J1755-2232 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 15608 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1755-2232_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 340 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 340 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 340 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1128 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.974221Jy sigma=0.007582 ! Fit after self-cal, rms=0.940744Jy sigma=0.007331 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.395 mas, bmaj=6.934 mas, bpa=-5.622 degrees ! Estimated noise=1504.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0417536 Jy ! Component: 100 - total flux cleaned = 0.0556591 Jy ! Total flux subtracted in 100 components = 0.0556591 Jy ! Clean residual min=-0.005834 max=0.010102 Jy/beam ! Clean residual mean=-0.000080 rms=0.002123 Jy/beam ! Combined flux in latest and established models = 0.0556591 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0556591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097883Jy sigma=0.000743 ! Fit after self-cal, rms=0.097225Jy sigma=0.000739 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=9.086 mas, bpa=-3.899 degrees ! Estimated noise=828.326 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187263 Jy ! Component: 100 - total flux cleaned = 0.0280732 Jy ! Component: 150 - total flux cleaned = 0.0328131 Jy ! Component: 200 - total flux cleaned = 0.0350048 Jy ! Total flux subtracted in 200 components = 0.0350048 Jy ! Clean residual min=-0.007995 max=0.016036 Jy/beam ! Clean residual mean=-0.000158 rms=0.003521 Jy/beam ! Combined flux in latest and established models = 0.0906639 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 46 components and 0.0906639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094294Jy sigma=0.000710 ! Fit after self-cal, rms=0.094111Jy sigma=0.000708 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.43 KP 0.92 ! LA 0.76 MK 1.19 NL 1.85 OV 2.02 ! PT 0.71 SC 1.31 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.26 KP 0.90 ! LA 0.75 MK 1.25 NL 1.92 OV 1.78 ! PT 0.72 SC 1.37 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.37 KP 0.90 ! LA 0.73 MK 1.15 NL 1.76 OV 1.71 ! PT 0.68 SC 1.28 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 1.01 KP 1.00* ! LA 1.00* MK 0.79 NL 1.00* OV 1.00* ! PT 0.81 SC 1.00* ! ! ! Fit before self-cal, rms=0.094111Jy sigma=0.000708 ! Fit after self-cal, rms=0.143148Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=9.898 mas, bpa=-5.208 degrees ! Estimated noise=913.539 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000470555 Jy ! Component: 100 - total flux cleaned = 0.000271728 Jy ! Component: 150 - total flux cleaned = 0.000219062 Jy ! Component: 200 - total flux cleaned = 0.000218919 Jy ! Total flux subtracted in 200 components = 0.000218919 Jy ! Clean residual min=-0.005057 max=0.007469 Jy/beam ! Clean residual mean=-0.000037 rms=0.001510 Jy/beam ! Combined flux in latest and established models = 0.0908828 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.0908828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142968Jy sigma=0.000668 ! Fit after self-cal, rms=0.146135Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146135Jy sigma=0.000661 ! Fit after self-cal, rms=0.171539Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=10.23 mas, bpa=-5.455 degrees ! Estimated noise=958.697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000550914 Jy ! Component: 100 - total flux cleaned = 0.00055494 Jy ! Component: 150 - total flux cleaned = 0.000553965 Jy ! Component: 200 - total flux cleaned = 0.000587864 Jy ! Total flux subtracted in 200 components = 0.000587864 Jy ! Clean residual min=-0.004609 max=0.005773 Jy/beam ! Clean residual mean=-0.000012 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.0914707 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 56 components and 0.0914707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171469Jy sigma=0.000659 ! Fit after self-cal, rms=0.172086Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.5, 30). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00495498 Jy ! Component: 100 - total flux cleaned = 0.00663157 Jy ! Component: 150 - total flux cleaned = 0.00662789 Jy ! Component: 200 - total flux cleaned = 0.00662629 Jy ! Total flux subtracted in 200 components = 0.00662629 Jy ! Clean residual min=-0.003699 max=0.004327 Jy/beam ! Clean residual mean=0.000002 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.098097 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 0.098097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171909Jy sigma=0.000657 ! Fit after self-cal, rms=0.171755Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171755Jy sigma=0.000657 ! Fit after self-cal, rms=0.172220Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=10.38 mas, bpa=-5.557 degrees ! Estimated noise=960.476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034557 Jy ! Component: 100 - total flux cleaned = 0.0037676 Jy ! Component: 150 - total flux cleaned = 0.00365408 Jy ! Component: 200 - total flux cleaned = 0.00355587 Jy ! Total flux subtracted in 200 components = 0.00355587 Jy ! Clean residual min=-0.003431 max=0.004512 Jy/beam ! Clean residual mean=0.000008 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.101653 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 87 components and 0.101653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172125Jy sigma=0.000655 ! Fit after self-cal, rms=0.172055Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (60, 122). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399138 Jy ! Component: 100 - total flux cleaned = 0.0055288 Jy ! Component: 150 - total flux cleaned = 0.00588293 Jy ! Component: 200 - total flux cleaned = 0.00588221 Jy ! Total flux subtracted in 200 components = 0.00588221 Jy ! Clean residual min=-0.003335 max=0.004165 Jy/beam ! Clean residual mean=0.000003 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.107535 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 102 components and 0.107535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171912Jy sigma=0.000654 ! Fit after self-cal, rms=0.171801Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171801Jy sigma=0.000653 ! Fit after self-cal, rms=0.169281Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.875 mas, bmaj=27.97 mas, bpa=-2.219 degrees ! Estimated noise=991.603 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364709 Jy ! Component: 100 - total flux cleaned = 0.00471266 Jy ! Component: 150 - total flux cleaned = 0.00483266 Jy ! Component: 200 - total flux cleaned = 0.00468774 Jy ! Total flux subtracted in 200 components = 0.00468774 Jy ! Clean residual min=-0.003294 max=0.004396 Jy/beam ! Clean residual mean=-0.000008 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.112223 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 118 components and 0.112223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169227Jy sigma=0.000652 ! Fit after self-cal, rms=0.169097Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128848 Jy ! Component: 100 - total flux cleaned = 0.00118933 Jy ! Component: 150 - total flux cleaned = 0.00104534 Jy ! Component: 200 - total flux cleaned = 0.000827405 Jy ! Total flux subtracted in 200 components = 0.000827405 Jy ! Clean residual min=-0.003420 max=0.004223 Jy/beam ! Clean residual mean=-0.000005 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.11305 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 124 components and 0.11305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169060Jy sigma=0.000651 ! Fit after self-cal, rms=0.169017Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=10.45 mas, bpa=-5.771 degrees ! Estimated noise=954.301 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.617 x 10.45 at -5.771 degrees (North through East) ! Clean map min=-0.0055943 max=0.060191 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.537 mas, bmaj=7.729 mas, bpa=-7.48 degrees ! Estimated noise=1912.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0493391 Jy ! Component: 100 - total flux cleaned = 0.0662491 Jy ! Component: 150 - total flux cleaned = 0.0773651 Jy ! Component: 200 - total flux cleaned = 0.0859398 Jy ! Total flux subtracted in 200 components = 0.0859398 Jy ! Clean residual min=-0.006609 max=0.007048 Jy/beam ! Clean residual mean=-0.000031 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.0859398 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0859398 Jy ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=10.45 mas, bpa=-5.771 degrees ! Estimated noise=954.301 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00959484 Jy ! Component: 100 - total flux cleaned = 0.0160343 Jy ! Component: 150 - total flux cleaned = 0.0189506 Jy ! Component: 200 - total flux cleaned = 0.0200547 Jy ! Total flux subtracted in 200 components = 0.0200547 Jy ! Clean residual min=-0.004160 max=0.004495 Jy/beam ! Clean residual mean=-0.000026 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.105995 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 56 components and 0.105995 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.875 mas, bmaj=27.97 mas, bpa=-2.219 degrees ! Estimated noise=991.603 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336436 Jy ! Component: 100 - total flux cleaned = 0.00419527 Jy ! Component: 150 - total flux cleaned = 0.00428805 Jy ! Component: 200 - total flux cleaned = 0.00436842 Jy ! Total flux subtracted in 200 components = 0.00436842 Jy ! Clean residual min=-0.004009 max=0.003790 Jy/beam ! Clean residual mean=-0.000021 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.110363 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.03638e-05 Jy ! Component: 100 - total flux cleaned = 7.382e-05 Jy ! Component: 150 - total flux cleaned = 1.82528e-05 Jy ! Component: 200 - total flux cleaned = -3.51183e-05 Jy ! Total flux subtracted in 200 components = -3.51183e-05 Jy ! Clean residual min=-0.003578 max=0.003795 Jy/beam ! Clean residual mean=-0.000020 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 0.110328 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.110328 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=10.45 mas, bpa=-5.771 degrees ! Estimated noise=954.301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017917 Jy ! Component: 100 - total flux cleaned = -0.000324991 Jy ! Component: 150 - total flux cleaned = -0.000588459 Jy ! Component: 200 - total flux cleaned = -0.000588547 Jy ! Total flux subtracted in 200 components = -0.000588547 Jy ! Clean residual min=-0.003190 max=0.003368 Jy/beam ! Clean residual mean=-0.000013 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.109739 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 0.109739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168993Jy sigma=0.000651 ! Fit after self-cal, rms=0.168845Jy sigma=0.000651 wmodel J1755-2232_S_2017_06_10_pus_map.mod ! Writing 92 model components to file: J1755-2232_S_2017_06_10_pus_map.mod wobs J1755-2232_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1755-2232_S_2017_06_10_pus_uvs.fits wwins J1755-2232_S_2017_06_10_pus_map.win ! wwins: Wrote 3 windows to J1755-2232_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116144 Jy ! Component: 100 - total flux cleaned = 0.0020412 Jy ! Component: 150 - total flux cleaned = 0.00250002 Jy ! Component: 200 - total flux cleaned = 0.00250032 Jy ! Component: 250 - total flux cleaned = 0.00263876 Jy ! Component: 300 - total flux cleaned = 0.00277061 Jy ! Component: 350 - total flux cleaned = 0.00306726 Jy ! Component: 400 - total flux cleaned = 0.00327227 Jy ! Component: 450 - total flux cleaned = 0.00339204 Jy ! Component: 500 - total flux cleaned = 0.00358693 Jy ! Component: 550 - total flux cleaned = 0.00370082 Jy ! Component: 600 - total flux cleaned = 0.00366275 Jy ! Component: 650 - total flux cleaned = 0.00369839 Jy ! Component: 700 - total flux cleaned = 0.00376921 Jy ! Component: 750 - total flux cleaned = 0.00394242 Jy ! Component: 800 - total flux cleaned = 0.00404427 Jy ! Component: 850 - total flux cleaned = 0.00411187 Jy ! Component: 900 - total flux cleaned = 0.00427595 Jy ! Component: 950 - total flux cleaned = 0.00443729 Jy ! Component: 1000 - total flux cleaned = 0.00449968 Jy ! Component: 1050 - total flux cleaned = 0.00456089 Jy ! Component: 1100 - total flux cleaned = 0.00453024 Jy ! Component: 1150 - total flux cleaned = 0.00459028 Jy ! Component: 1200 - total flux cleaned = 0.00453128 Jy ! Component: 1250 - total flux cleaned = 0.00453119 Jy ! Component: 1300 - total flux cleaned = 0.00441666 Jy ! Component: 1350 - total flux cleaned = 0.00444467 Jy ! Component: 1400 - total flux cleaned = 0.00441693 Jy ! Component: 1450 - total flux cleaned = 0.00433484 Jy ! Component: 1500 - total flux cleaned = 0.00436194 Jy ! Component: 1550 - total flux cleaned = 0.00425565 Jy ! Component: 1600 - total flux cleaned = 0.00420312 Jy ! Component: 1650 - total flux cleaned = 0.00412477 Jy ! Component: 1700 - total flux cleaned = 0.00402177 Jy ! Component: 1750 - total flux cleaned = 0.00389448 Jy ! Component: 1800 - total flux cleaned = 0.00376873 Jy ! Component: 1850 - total flux cleaned = 0.00369427 Jy ! Component: 1900 - total flux cleaned = 0.00359559 Jy ! Component: 1950 - total flux cleaned = 0.00354664 Jy ! Component: 2000 - total flux cleaned = 0.00344991 Jy ! Component: 2050 - total flux cleaned = 0.00337812 Jy ! Component: 2100 - total flux cleaned = 0.0032597 Jy ! Component: 2150 - total flux cleaned = 0.00316568 Jy ! Component: 2200 - total flux cleaned = 0.00307316 Jy ! Component: 2250 - total flux cleaned = 0.00298099 Jy ! Component: 2300 - total flux cleaned = 0.00284421 Jy ! Component: 2350 - total flux cleaned = 0.00279913 Jy ! Component: 2400 - total flux cleaned = 0.00268727 Jy ! Component: 2450 - total flux cleaned = 0.0026873 Jy ! Component: 2500 - total flux cleaned = 0.00262129 Jy ! Component: 2550 - total flux cleaned = 0.00257762 Jy ! Component: 2600 - total flux cleaned = 0.0025992 Jy ! Component: 2650 - total flux cleaned = 0.0025991 Jy ! Component: 2700 - total flux cleaned = 0.00259915 Jy ! Component: 2750 - total flux cleaned = 0.00264126 Jy ! Component: 2800 - total flux cleaned = 0.00266211 Jy ! Component: 2850 - total flux cleaned = 0.0026828 Jy ! Component: 2900 - total flux cleaned = 0.00274443 Jy ! Component: 2950 - total flux cleaned = 0.00278524 Jy ! Component: 3000 - total flux cleaned = 0.00282582 Jy ! Component: 3050 - total flux cleaned = 0.00290646 Jy ! Component: 3100 - total flux cleaned = 0.00300636 Jy ! Component: 3150 - total flux cleaned = 0.00306595 Jy ! Component: 3200 - total flux cleaned = 0.00312514 Jy ! Component: 3250 - total flux cleaned = 0.0032233 Jy ! Component: 3300 - total flux cleaned = 0.00328187 Jy ! Component: 3350 - total flux cleaned = 0.00339807 Jy ! Component: 3400 - total flux cleaned = 0.00347499 Jy ! Component: 3450 - total flux cleaned = 0.00357066 Jy ! Component: 3500 - total flux cleaned = 0.00366577 Jy ! Component: 3550 - total flux cleaned = 0.00377914 Jy ! Component: 3600 - total flux cleaned = 0.00387319 Jy ! Component: 3650 - total flux cleaned = 0.00398528 Jy ! Component: 3700 - total flux cleaned = 0.004078 Jy ! Component: 3750 - total flux cleaned = 0.00415198 Jy ! Component: 3800 - total flux cleaned = 0.00429893 Jy ! Component: 3850 - total flux cleaned = 0.0043903 Jy ! Component: 3900 - total flux cleaned = 0.00451762 Jy ! Component: 3950 - total flux cleaned = 0.00457189 Jy ! Component: 4000 - total flux cleaned = 0.00471595 Jy ! Component: 4050 - total flux cleaned = 0.00475191 Jy ! Total flux subtracted in 4096 components = 0.00487679 Jy ! Clean residual min=-0.000958 max=0.001009 Jy/beam ! Clean residual mean=0.000000 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.114616 Jy keep ! Adding 230 model components to the UV plane model. ! The established model now contains 322 components and 0.114616 Jy ![Exited script file: muppet] wmap "J1755-2232_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.617 x 10.45 at -5.771 degrees (North through East) ! Clean map min=-0.0047999 max=0.064779 Jy/beam ! Writing clean map to FITS file: J1755-2232_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0647793 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000303609 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.40604 1.40604 2.81209 5.62418 11.2484 22.4967 44.9934 89.9868 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.617 x 10.45 at -5.771 degrees (North through East) ! Clean map min=-0.0047999 max=0.064779 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1755-2232_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:59:27 2019