! Started logfile: J1755+6236_S_2017_09_26_pus_uvs.log on Sat May 11 13:04:07 2019 obs J1755+6236_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1755+6236_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.931689 visibilities/baseline/integration-bin. ! Found source: J1755+6236 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 39444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1755+6236_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1564 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.979164Jy sigma=0.008648 ! Fit after self-cal, rms=0.950689Jy sigma=0.008412 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=5.798 mas, bpa=-75.4 degrees ! Estimated noise=1171.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0353129 Jy ! Component: 100 - total flux cleaned = 0.0469729 Jy ! Total flux subtracted in 100 components = 0.0469729 Jy ! Clean residual min=-0.005728 max=0.007453 Jy/beam ! Clean residual mean=-0.000103 rms=0.001610 Jy/beam ! Combined flux in latest and established models = 0.0469729 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0469729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091582Jy sigma=0.000748 ! Fit after self-cal, rms=0.091029Jy sigma=0.000743 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.957 mas, bmaj=7.307 mas, bpa=-76.8 degrees ! Estimated noise=461.832 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141647 Jy ! Component: 100 - total flux cleaned = 0.0225145 Jy ! Component: 150 - total flux cleaned = 0.0277759 Jy ! Component: 200 - total flux cleaned = 0.0311054 Jy ! Total flux subtracted in 200 components = 0.0311054 Jy ! Clean residual min=-0.005749 max=0.008943 Jy/beam ! Clean residual mean=-0.000065 rms=0.001904 Jy/beam ! Combined flux in latest and established models = 0.0780784 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 62 components and 0.0780784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088799Jy sigma=0.000720 ! Fit after self-cal, rms=0.088655Jy sigma=0.000718 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 1.13 HN 1.29 KP 0.91 ! LA 0.82 MK 1.01 NL 1.28 OV 1.20 ! PT 0.73 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 1.11 HN 1.23 KP 0.89 ! LA 0.79 MK 1.06 NL 1.43 OV 1.27 ! PT 0.72 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.15 HN 1.17 KP 0.84 ! LA 0.83 MK 1.08 NL 1.32 OV 1.19 ! PT 0.73 ! ! ! Correcting IF 4. ! A total of 426 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.96 KP 1.00* ! LA 0.95 MK 0.84 NL 1.00* OV 1.00* ! PT 0.79 ! ! ! Fit before self-cal, rms=0.088655Jy sigma=0.000718 ! Fit after self-cal, rms=0.097216Jy sigma=0.000705 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.085 mas, bmaj=7.478 mas, bpa=-75.11 degrees ! Estimated noise=486.341 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000892459 Jy ! Component: 100 - total flux cleaned = 0.000895226 Jy ! Component: 150 - total flux cleaned = 0.000895125 Jy ! Component: 200 - total flux cleaned = 0.000893915 Jy ! Total flux subtracted in 200 components = 0.000893915 Jy ! Clean residual min=-0.004201 max=0.006078 Jy/beam ! Clean residual mean=0.000027 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 0.0789723 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.0789723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097174Jy sigma=0.000705 ! Fit after self-cal, rms=0.098232Jy sigma=0.000701 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098232Jy sigma=0.000701 ! Fit after self-cal, rms=0.105144Jy sigma=0.000698 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.129 mas, bmaj=7.476 mas, bpa=-76.26 degrees ! Estimated noise=498.388 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011065 Jy ! Component: 100 - total flux cleaned = 0.00120681 Jy ! Component: 150 - total flux cleaned = 0.00129442 Jy ! Component: 200 - total flux cleaned = 0.00134697 Jy ! Total flux subtracted in 200 components = 0.00134697 Jy ! Clean residual min=-0.003597 max=0.004300 Jy/beam ! Clean residual mean=-0.000009 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.0803192 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 73 components and 0.0803192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105119Jy sigma=0.000698 ! Fit after self-cal, rms=0.105576Jy sigma=0.000697 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000270495 Jy ! Component: 100 - total flux cleaned = -0.000242507 Jy ! Component: 150 - total flux cleaned = -0.000219411 Jy ! Component: 200 - total flux cleaned = -0.000175624 Jy ! Total flux subtracted in 200 components = -0.000175624 Jy ! Clean residual min=-0.003691 max=0.004247 Jy/beam ! Clean residual mean=-0.000011 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.0801436 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 79 components and 0.0801436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105563Jy sigma=0.000697 ! Fit after self-cal, rms=0.105555Jy sigma=0.000697 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105555Jy sigma=0.000697 ! Fit after self-cal, rms=0.106430Jy sigma=0.000697 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.101 mas, bmaj=7.431 mas, bpa=-76.48 degrees ! Estimated noise=498.686 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000909847 Jy ! Component: 100 - total flux cleaned = 0.00101509 Jy ! Component: 150 - total flux cleaned = 0.00107983 Jy ! Component: 200 - total flux cleaned = 0.00109939 Jy ! Total flux subtracted in 200 components = 0.00109939 Jy ! Clean residual min=-0.003543 max=0.004139 Jy/beam ! Clean residual mean=-0.000011 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.081243 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 79 components and 0.081243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106415Jy sigma=0.000697 ! Fit after self-cal, rms=0.106474Jy sigma=0.000697 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.89908e-05 Jy ! Component: 100 - total flux cleaned = 7.2723e-05 Jy ! Component: 150 - total flux cleaned = 7.2749e-05 Jy ! Component: 200 - total flux cleaned = 0.000110806 Jy ! Total flux subtracted in 200 components = 0.000110806 Jy ! Clean residual min=-0.003584 max=0.004117 Jy/beam ! Clean residual mean=-0.000011 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.0813538 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 80 components and 0.0813538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106463Jy sigma=0.000697 ! Fit after self-cal, rms=0.106455Jy sigma=0.000697 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106455Jy sigma=0.000697 ! Fit after self-cal, rms=0.106130Jy sigma=0.000697 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.507 mas, bmaj=12.27 mas, bpa=79.63 degrees ! Estimated noise=562.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109159 Jy ! Component: 100 - total flux cleaned = 0.00120844 Jy ! Component: 150 - total flux cleaned = 0.00128275 Jy ! Component: 200 - total flux cleaned = 0.00131566 Jy ! Total flux subtracted in 200 components = 0.00131566 Jy ! Clean residual min=-0.003935 max=0.005240 Jy/beam ! Clean residual mean=-0.000024 rms=0.001455 Jy/beam ! Combined flux in latest and established models = 0.0826695 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 80 components and 0.0826695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106128Jy sigma=0.000697 ! Fit after self-cal, rms=0.106119Jy sigma=0.000697 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.93389e-05 Jy ! Component: 100 - total flux cleaned = 6.64587e-05 Jy ! Component: 150 - total flux cleaned = 8.01872e-05 Jy ! Component: 200 - total flux cleaned = 0.00010988 Jy ! Total flux subtracted in 200 components = 0.00010988 Jy ! Clean residual min=-0.003970 max=0.005260 Jy/beam ! Clean residual mean=-0.000024 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.0827794 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 81 components and 0.0827793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106120Jy sigma=0.000697 ! Fit after self-cal, rms=0.106114Jy sigma=0.000697 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.071 mas, bmaj=7.385 mas, bpa=-76.51 degrees ! Estimated noise=498.215 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.071 x 7.385 at -76.51 degrees (North through East) ! Clean map min=-0.0034463 max=0.044393 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=5.74 mas, bpa=-75.88 degrees ! Estimated noise=1273.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0382302 Jy ! Component: 100 - total flux cleaned = 0.0536531 Jy ! Component: 150 - total flux cleaned = 0.0630126 Jy ! Component: 200 - total flux cleaned = 0.0690943 Jy ! Total flux subtracted in 200 components = 0.0690943 Jy ! Clean residual min=-0.005017 max=0.003827 Jy/beam ! Clean residual mean=-0.000043 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.0690943 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0690943 Jy ! Inverting map and beam ! Estimated beam: bmin=4.071 mas, bmaj=7.385 mas, bpa=-76.51 degrees ! Estimated noise=498.215 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593822 Jy ! Component: 100 - total flux cleaned = 0.00901589 Jy ! Component: 150 - total flux cleaned = 0.0107751 Jy ! Component: 200 - total flux cleaned = 0.0117887 Jy ! Total flux subtracted in 200 components = 0.0117887 Jy ! Clean residual min=-0.003544 max=0.003996 Jy/beam ! Clean residual mean=-0.000017 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.080883 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 38 components and 0.080883 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.507 mas, bmaj=12.27 mas, bpa=79.63 degrees ! Estimated noise=562.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125066 Jy ! Component: 100 - total flux cleaned = 0.00159276 Jy ! Component: 150 - total flux cleaned = 0.00164817 Jy ! Component: 200 - total flux cleaned = 0.00169883 Jy ! Total flux subtracted in 200 components = 0.00169883 Jy ! Clean residual min=-0.004013 max=0.005259 Jy/beam ! Clean residual mean=-0.000025 rms=0.001457 Jy/beam ! Combined flux in latest and established models = 0.0825819 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.09009e-05 Jy ! Component: 100 - total flux cleaned = 6.00425e-05 Jy ! Component: 150 - total flux cleaned = 8.64745e-05 Jy ! Component: 200 - total flux cleaned = 0.000111492 Jy ! Total flux subtracted in 200 components = 0.000111492 Jy ! Clean residual min=-0.003992 max=0.005269 Jy/beam ! Clean residual mean=-0.000024 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.0826934 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 42 components and 0.0826933 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.071 mas, bmaj=7.385 mas, bpa=-76.51 degrees ! Estimated noise=498.215 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000236816 Jy ! Component: 100 - total flux cleaned = -0.000266914 Jy ! Component: 150 - total flux cleaned = -0.000292383 Jy ! Component: 200 - total flux cleaned = -0.000303949 Jy ! Total flux subtracted in 200 components = -0.000303949 Jy ! Clean residual min=-0.003454 max=0.004017 Jy/beam ! Clean residual mean=-0.000012 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.0823894 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.0823894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106086Jy sigma=0.000696 ! Fit after self-cal, rms=0.106024Jy sigma=0.000696 wmodel J1755+6236_S_2017_09_26_pus_map.mod ! Writing 48 model components to file: J1755+6236_S_2017_09_26_pus_map.mod wobs J1755+6236_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1755+6236_S_2017_09_26_pus_uvs.fits wwins J1755+6236_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1755+6236_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186488 Jy ! Component: 100 - total flux cleaned = 0.00329153 Jy ! Component: 150 - total flux cleaned = 0.00423928 Jy ! Component: 200 - total flux cleaned = 0.00495719 Jy ! Component: 250 - total flux cleaned = 0.00558425 Jy ! Component: 300 - total flux cleaned = 0.00591158 Jy ! Component: 350 - total flux cleaned = 0.00612153 Jy ! Component: 400 - total flux cleaned = 0.00612055 Jy ! Component: 450 - total flux cleaned = 0.00616992 Jy ! Component: 500 - total flux cleaned = 0.00636005 Jy ! Component: 550 - total flux cleaned = 0.00654435 Jy ! Component: 600 - total flux cleaned = 0.00676863 Jy ! Component: 650 - total flux cleaned = 0.00694227 Jy ! Component: 700 - total flux cleaned = 0.00706948 Jy ! Component: 750 - total flux cleaned = 0.00723597 Jy ! Component: 800 - total flux cleaned = 0.00739892 Jy ! Component: 850 - total flux cleaned = 0.00775452 Jy ! Component: 900 - total flux cleaned = 0.00783088 Jy ! Component: 950 - total flux cleaned = 0.0079445 Jy ! Component: 1000 - total flux cleaned = 0.00813013 Jy ! Component: 1050 - total flux cleaned = 0.00834796 Jy ! Component: 1100 - total flux cleaned = 0.00863213 Jy ! Component: 1150 - total flux cleaned = 0.00873579 Jy ! Component: 1200 - total flux cleaned = 0.00887241 Jy ! Component: 1250 - total flux cleaned = 0.00907356 Jy ! Component: 1300 - total flux cleaned = 0.00923803 Jy ! Component: 1350 - total flux cleaned = 0.00936831 Jy ! Component: 1400 - total flux cleaned = 0.00962312 Jy ! Component: 1450 - total flux cleaned = 0.00981166 Jy ! Component: 1500 - total flux cleaned = 0.0100576 Jy ! Component: 1550 - total flux cleaned = 0.0102388 Jy ! Component: 1600 - total flux cleaned = 0.010417 Jy ! Component: 1650 - total flux cleaned = 0.0105928 Jy ! Component: 1700 - total flux cleaned = 0.0107372 Jy ! Component: 1750 - total flux cleaned = 0.0109355 Jy ! Component: 1800 - total flux cleaned = 0.0111586 Jy ! Component: 1850 - total flux cleaned = 0.0113504 Jy ! Component: 1900 - total flux cleaned = 0.0115391 Jy ! Component: 1950 - total flux cleaned = 0.0116456 Jy ! Component: 2000 - total flux cleaned = 0.0117772 Jy ! Component: 2050 - total flux cleaned = 0.0118544 Jy ! Component: 2100 - total flux cleaned = 0.0120075 Jy ! Component: 2150 - total flux cleaned = 0.0120836 Jy ! Component: 2200 - total flux cleaned = 0.0122328 Jy ! Component: 2250 - total flux cleaned = 0.012306 Jy ! Component: 2300 - total flux cleaned = 0.0124031 Jy ! Component: 2350 - total flux cleaned = 0.0124989 Jy ! Component: 2400 - total flux cleaned = 0.0124992 Jy ! Component: 2450 - total flux cleaned = 0.012686 Jy ! Component: 2500 - total flux cleaned = 0.0126859 Jy ! Component: 2550 - total flux cleaned = 0.0127314 Jy ! Component: 2600 - total flux cleaned = 0.0127315 Jy ! Component: 2650 - total flux cleaned = 0.0128428 Jy ! Component: 2700 - total flux cleaned = 0.012843 Jy ! Component: 2750 - total flux cleaned = 0.0128647 Jy ! Component: 2800 - total flux cleaned = 0.0128865 Jy ! Component: 2850 - total flux cleaned = 0.0129083 Jy ! Component: 2900 - total flux cleaned = 0.012992 Jy ! Component: 2950 - total flux cleaned = 0.0130127 Jy ! Component: 3000 - total flux cleaned = 0.0130539 Jy ! Component: 3050 - total flux cleaned = 0.0129928 Jy ! Component: 3100 - total flux cleaned = 0.0130331 Jy ! Component: 3150 - total flux cleaned = 0.0129536 Jy ! Component: 3200 - total flux cleaned = 0.0129733 Jy ! Component: 3250 - total flux cleaned = 0.0129538 Jy ! Component: 3300 - total flux cleaned = 0.0129731 Jy ! Component: 3350 - total flux cleaned = 0.0130302 Jy ! Component: 3400 - total flux cleaned = 0.0129924 Jy ! Component: 3450 - total flux cleaned = 0.0129929 Jy ! Component: 3500 - total flux cleaned = 0.0131233 Jy ! Component: 3550 - total flux cleaned = 0.0131419 Jy ! Component: 3600 - total flux cleaned = 0.0131416 Jy ! Component: 3650 - total flux cleaned = 0.0131779 Jy ! Component: 3700 - total flux cleaned = 0.0131242 Jy ! Component: 3750 - total flux cleaned = 0.0132313 Jy ! Component: 3800 - total flux cleaned = 0.0132843 Jy ! Component: 3850 - total flux cleaned = 0.0133018 Jy ! Component: 3900 - total flux cleaned = 0.0133365 Jy ! Component: 3950 - total flux cleaned = 0.0133191 Jy ! Component: 4000 - total flux cleaned = 0.0133707 Jy ! Component: 4050 - total flux cleaned = 0.0133536 Jy ! Total flux subtracted in 4096 components = 0.0134045 Jy ! Clean residual min=-0.000870 max=0.000997 Jy/beam ! Clean residual mean=0.000006 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.095794 Jy keep ! Adding 440 model components to the UV plane model. ! The established model now contains 488 components and 0.0957939 Jy ![Exited script file: muppet] wmap "J1755+6236_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.071 x 7.385 at -76.51 degrees (North through East) ! Clean map min=-0.0018441 max=0.043526 Jy/beam ! Writing clean map to FITS file: J1755+6236_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0435256 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000349617 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.40973 2.40973 4.81946 9.63892 19.2778 38.5557 77.1114 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.043 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.071 x 7.385 at -76.51 degrees (North through East) ! Clean map min=-0.0018441 max=0.043526 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1755+6236_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:04:12 2019