! Started logfile: J1753-1843_S_2017_02_24_pus_uvs.log on Sat May 4 11:32:41 2019 obs J1753-1843_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1753-1843_S_2017_02_24_pus_uva.fits ! AN table 1: 174 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.888633 visibilities/baseline/integration-bin. ! Found source: J1753-1843 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 27832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1753-1843_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 737 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952581Jy sigma=0.033340 ! Fit after self-cal, rms=0.931347Jy sigma=0.033195 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=7.151 mas, bpa=-3.109 degrees ! Estimated noise=920.478 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.042149 Jy ! Component: 100 - total flux cleaned = 0.0531952 Jy ! Total flux subtracted in 100 components = 0.0531952 Jy ! Clean residual min=-0.008499 max=0.008425 Jy/beam ! Clean residual mean=-0.000025 rms=0.002841 Jy/beam ! Combined flux in latest and established models = 0.0531952 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0531952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173316Jy sigma=0.001803 ! Fit after self-cal, rms=0.173258Jy sigma=0.001796 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.199 mas, bmaj=10.38 mas, bpa=-1.285 degrees ! Estimated noise=439.705 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403897 Jy ! Component: 100 - total flux cleaned = 0.000205551 Jy ! Component: 150 - total flux cleaned = 0.000114745 Jy ! Component: 200 - total flux cleaned = -4.92712e-05 Jy ! Total flux subtracted in 200 components = -4.92712e-05 Jy ! Clean residual min=-0.012542 max=0.015166 Jy/beam ! Clean residual mean=-0.000045 rms=0.004856 Jy/beam ! Combined flux in latest and established models = 0.0531459 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.0531459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173066Jy sigma=0.001804 ! Fit after self-cal, rms=0.173061Jy sigma=0.001804 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.68 FD 0.76 HN 1.16 KP 0.71 ! LA 0.70 MK 1.40 NL 0.85 OV 0.80 ! PT 0.70 SC 1.23 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 FD 0.67 HN 1.23 KP 0.69 ! LA 0.64 MK 1.45 NL 0.84 OV 0.82 ! PT 0.70 SC 1.24 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 8.49 FD 0.71 HN 1.16 KP 0.77 ! LA 0.73 MK 1.57 NL 0.87 OV 0.76 ! PT 0.70 SC 1.29 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.85 HN 0.85 KP 1.00* ! LA 25.42 MK 1.03 NL 1.00* OV 0.78 ! PT 0.84 SC 1.00* ! ! ! Fit before self-cal, rms=0.173061Jy sigma=0.001804 ! Fit after self-cal, rms=1.171008Jy sigma=0.000709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.255 mas, bmaj=10.87 mas, bpa=-1.016 degrees ! Estimated noise=473.649 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00492873 Jy ! Component: 100 - total flux cleaned = 0.00506723 Jy ! Component: 150 - total flux cleaned = 0.00497929 Jy ! Component: 200 - total flux cleaned = 0.00490712 Jy ! Total flux subtracted in 200 components = 0.00490712 Jy ! Clean residual min=-0.002582 max=0.002618 Jy/beam ! Clean residual mean=-0.000004 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.058053 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 0.058053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.170212Jy sigma=0.000710 ! Fit after self-cal, rms=1.170792Jy sigma=0.000698 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.170792Jy sigma=0.000698 ! Fit after self-cal, rms=1.949203Jy sigma=0.000695 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.208 mas, bmaj=10.83 mas, bpa=-1.154 degrees ! Estimated noise=496.362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445524 Jy ! Component: 100 - total flux cleaned = 0.00458967 Jy ! Component: 150 - total flux cleaned = 0.00428413 Jy ! Component: 200 - total flux cleaned = 0.00402199 Jy ! Total flux subtracted in 200 components = 0.00402199 Jy ! Clean residual min=-0.002459 max=0.002349 Jy/beam ! Clean residual mean=-0.000004 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.062075 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 72 components and 0.062075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.948542Jy sigma=0.000696 ! Fit after self-cal, rms=1.948564Jy sigma=0.000696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.04608e-05 Jy ! Component: 100 - total flux cleaned = -0.00026537 Jy ! Component: 150 - total flux cleaned = -0.000484399 Jy ! Component: 200 - total flux cleaned = -0.000641518 Jy ! Total flux subtracted in 200 components = -0.000641518 Jy ! Clean residual min=-0.002384 max=0.002263 Jy/beam ! Clean residual mean=-0.000004 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.0614335 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 85 components and 0.0614335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.948389Jy sigma=0.000697 ! Fit after self-cal, rms=1.948387Jy sigma=0.000696 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.948387Jy sigma=0.000696 ! Fit after self-cal, rms=2.487002Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.133 mas, bmaj=10.7 mas, bpa=-1.439 degrees ! Estimated noise=496.249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143311 Jy ! Component: 100 - total flux cleaned = 0.00150406 Jy ! Component: 150 - total flux cleaned = 0.00150488 Jy ! Component: 200 - total flux cleaned = 0.00152949 Jy ! Total flux subtracted in 200 components = 0.00152949 Jy ! Clean residual min=-0.001913 max=0.002126 Jy/beam ! Clean residual mean=-0.000002 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.062963 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 99 components and 0.062963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.486910Jy sigma=0.000679 ! Fit after self-cal, rms=2.486899Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (91, -109). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185463 Jy ! Component: 100 - total flux cleaned = 0.00230717 Jy ! Component: 150 - total flux cleaned = 0.0024199 Jy ! Component: 200 - total flux cleaned = 0.00244611 Jy ! Total flux subtracted in 200 components = 0.00244611 Jy ! Clean residual min=-0.001654 max=0.001665 Jy/beam ! Clean residual mean=-0.000002 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0654091 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 118 components and 0.0654091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.486825Jy sigma=0.000677 ! Fit after self-cal, rms=2.486825Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.486825Jy sigma=0.000677 ! Fit after self-cal, rms=2.627980Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.49 mas, bmaj=19.33 mas, bpa=1.465 degrees ! Estimated noise=526.382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013889 Jy ! Component: 100 - total flux cleaned = 0.00206771 Jy ! Component: 150 - total flux cleaned = 0.00206785 Jy ! Component: 200 - total flux cleaned = 0.00204483 Jy ! Total flux subtracted in 200 components = 0.00204483 Jy ! Clean residual min=-0.001773 max=0.001602 Jy/beam ! Clean residual mean=-0.000000 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.067454 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 138 components and 0.067454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.627891Jy sigma=0.000677 ! Fit after self-cal, rms=2.627892Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259464 Jy ! Component: 100 - total flux cleaned = 0.000238549 Jy ! Component: 150 - total flux cleaned = 0.000220559 Jy ! Component: 200 - total flux cleaned = 0.00023756 Jy ! Total flux subtracted in 200 components = 0.00023756 Jy ! Clean residual min=-0.001732 max=0.001549 Jy/beam ! Clean residual mean=0.000000 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.0676915 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 141 components and 0.0676915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.627862Jy sigma=0.000677 ! Fit after self-cal, rms=2.627862Jy sigma=0.000677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.071 mas, bmaj=10.57 mas, bpa=-1.592 degrees ! Estimated noise=497.625 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.071 x 10.57 at -1.592 degrees (North through East) ! Clean map min=-0.0032083 max=0.061821 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=7.633 mas, bpa=-3.664 degrees ! Estimated noise=964.977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0441093 Jy ! Component: 100 - total flux cleaned = 0.0563745 Jy ! Component: 150 - total flux cleaned = 0.0631772 Jy ! Component: 200 - total flux cleaned = 0.0663458 Jy ! Total flux subtracted in 200 components = 0.0663458 Jy ! Clean residual min=-0.002704 max=0.002941 Jy/beam ! Clean residual mean=0.000001 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.0663458 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0663458 Jy ! Inverting map and beam ! Estimated beam: bmin=4.071 mas, bmaj=10.57 mas, bpa=-1.592 degrees ! Estimated noise=497.625 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238373 Jy ! Component: 100 - total flux cleaned = 0.00270638 Jy ! Component: 150 - total flux cleaned = 0.00297386 Jy ! Component: 200 - total flux cleaned = 0.00312075 Jy ! Total flux subtracted in 200 components = 0.00312075 Jy ! Clean residual min=-0.001816 max=0.001680 Jy/beam ! Clean residual mean=0.000001 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0694665 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 39 components and 0.0694665 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.49 mas, bmaj=19.33 mas, bpa=1.465 degrees ! Estimated noise=526.382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169798 Jy ! Component: 100 - total flux cleaned = -0.000297164 Jy ! Component: 150 - total flux cleaned = -0.000348185 Jy ! Component: 200 - total flux cleaned = -0.000307518 Jy ! Total flux subtracted in 200 components = -0.000307518 Jy ! Clean residual min=-0.001805 max=0.001648 Jy/beam ! Clean residual mean=0.000002 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.069159 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107956 Jy ! Component: 100 - total flux cleaned = -0.000174261 Jy ! Component: 150 - total flux cleaned = -0.000266484 Jy ! Component: 200 - total flux cleaned = -0.000323226 Jy ! Total flux subtracted in 200 components = -0.000323226 Jy ! Clean residual min=-0.001761 max=0.001574 Jy/beam ! Clean residual mean=0.000001 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0688358 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 117 components and 0.0688357 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.071 mas, bmaj=10.57 mas, bpa=-1.592 degrees ! Estimated noise=497.625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131544 Jy ! Component: 100 - total flux cleaned = -0.000324971 Jy ! Component: 150 - total flux cleaned = -0.000393554 Jy ! Component: 200 - total flux cleaned = -0.000425039 Jy ! Total flux subtracted in 200 components = -0.000425039 Jy ! Clean residual min=-0.001702 max=0.001530 Jy/beam ! Clean residual mean=0.000001 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0684107 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 131 components and 0.0684107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.627884Jy sigma=0.000677 ! Fit after self-cal, rms=2.627885Jy sigma=0.000677 wmodel J1753-1843_S_2017_02_24_pus_map.mod ! Writing 131 model components to file: J1753-1843_S_2017_02_24_pus_map.mod wobs J1753-1843_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1753-1843_S_2017_02_24_pus_uvs.fits wwins J1753-1843_S_2017_02_24_pus_map.win ! wwins: Wrote 3 windows to J1753-1843_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127156 Jy ! Component: 100 - total flux cleaned = -0.000154632 Jy ! Component: 150 - total flux cleaned = -0.00012994 Jy ! Component: 200 - total flux cleaned = -3.21191e-05 Jy ! Component: 250 - total flux cleaned = 1.58861e-05 Jy ! Component: 300 - total flux cleaned = 0.000178828 Jy ! Component: 350 - total flux cleaned = 0.00022483 Jy ! Component: 400 - total flux cleaned = 0.000225309 Jy ! Component: 450 - total flux cleaned = 0.00026902 Jy ! Component: 500 - total flux cleaned = 0.000247353 Jy ! Component: 550 - total flux cleaned = 0.000289673 Jy ! Component: 600 - total flux cleaned = 0.000372894 Jy ! Component: 650 - total flux cleaned = 0.00041321 Jy ! Component: 700 - total flux cleaned = 0.000332481 Jy ! Component: 750 - total flux cleaned = 0.000312681 Jy ! Component: 800 - total flux cleaned = 0.000313408 Jy ! Component: 850 - total flux cleaned = 0.000332945 Jy ! Component: 900 - total flux cleaned = 0.000314133 Jy ! Component: 950 - total flux cleaned = 0.000389521 Jy ! Component: 1000 - total flux cleaned = 0.0003518 Jy ! Component: 1050 - total flux cleaned = 0.000333472 Jy ! Component: 1100 - total flux cleaned = 0.000369642 Jy ! Component: 1150 - total flux cleaned = 0.000351729 Jy ! Component: 1200 - total flux cleaned = 0.00035192 Jy ! Component: 1250 - total flux cleaned = 0.000316778 Jy ! Component: 1300 - total flux cleaned = 0.00033417 Jy ! Component: 1350 - total flux cleaned = 0.000299661 Jy ! Component: 1400 - total flux cleaned = 0.000299587 Jy ! Component: 1450 - total flux cleaned = 0.000265582 Jy ! Component: 1500 - total flux cleaned = 0.000181542 Jy ! Component: 1550 - total flux cleaned = 0.000148196 Jy ! Component: 1600 - total flux cleaned = 0.000131595 Jy ! Component: 1650 - total flux cleaned = 0.000131558 Jy ! Component: 1700 - total flux cleaned = 0.000115296 Jy ! Component: 1750 - total flux cleaned = 5.11968e-05 Jy ! Component: 1800 - total flux cleaned = 5.12094e-05 Jy ! Component: 1850 - total flux cleaned = 5.15702e-05 Jy ! Component: 1900 - total flux cleaned = 8.273e-05 Jy ! Component: 1950 - total flux cleaned = 3.62721e-05 Jy ! Component: 2000 - total flux cleaned = 5.17199e-05 Jy ! Component: 2050 - total flux cleaned = 8.20773e-05 Jy ! Component: 2100 - total flux cleaned = 0.000112372 Jy ! Component: 2150 - total flux cleaned = 9.74577e-05 Jy ! Component: 2200 - total flux cleaned = 9.74314e-05 Jy ! Component: 2250 - total flux cleaned = 0.00017118 Jy ! Component: 2300 - total flux cleaned = 0.000112565 Jy ! Component: 2350 - total flux cleaned = 0.000156251 Jy ! Component: 2400 - total flux cleaned = 0.000185041 Jy ! Component: 2450 - total flux cleaned = 0.00021359 Jy ! Component: 2500 - total flux cleaned = 0.000185151 Jy ! Component: 2550 - total flux cleaned = 0.000270039 Jy ! Component: 2600 - total flux cleaned = 0.000242014 Jy ! Component: 2650 - total flux cleaned = 0.000241982 Jy ! Component: 2700 - total flux cleaned = 0.000241957 Jy ! Component: 2750 - total flux cleaned = 0.000310838 Jy ! Component: 2800 - total flux cleaned = 0.000379175 Jy ! Component: 2850 - total flux cleaned = 0.00040637 Jy ! Component: 2900 - total flux cleaned = 0.000446812 Jy ! Component: 2950 - total flux cleaned = 0.000473802 Jy ! Component: 3000 - total flux cleaned = 0.000553762 Jy ! Component: 3050 - total flux cleaned = 0.00055379 Jy ! Component: 3100 - total flux cleaned = 0.00065897 Jy ! Component: 3150 - total flux cleaned = 0.000711186 Jy ! Component: 3200 - total flux cleaned = 0.000802066 Jy ! Component: 3250 - total flux cleaned = 0.00077642 Jy ! Component: 3300 - total flux cleaned = 0.00085354 Jy ! Component: 3350 - total flux cleaned = 0.000917332 Jy ! Component: 3400 - total flux cleaned = 0.000891987 Jy ! Component: 3450 - total flux cleaned = 0.000967845 Jy ! Component: 3500 - total flux cleaned = 0.000992927 Jy ! Component: 3550 - total flux cleaned = 0.000992885 Jy ! Component: 3600 - total flux cleaned = 0.0010177 Jy ! Component: 3650 - total flux cleaned = 0.00105477 Jy ! Component: 3700 - total flux cleaned = 0.00106702 Jy ! Component: 3750 - total flux cleaned = 0.00112828 Jy ! Component: 3800 - total flux cleaned = 0.00110385 Jy ! Component: 3850 - total flux cleaned = 0.001128 Jy ! Component: 3900 - total flux cleaned = 0.00112797 Jy ! Component: 3950 - total flux cleaned = 0.00115195 Jy ! Component: 4000 - total flux cleaned = 0.00112826 Jy ! Component: 4050 - total flux cleaned = 0.00119946 Jy ! Total flux subtracted in 4096 components = 0.00123489 Jy ! Clean residual min=-0.000653 max=0.000694 Jy/beam ! Clean residual mean=-0.000001 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.0696456 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 377 components and 0.0696456 Jy ![Exited script file: muppet] wmap "J1753-1843_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.071 x 10.57 at -1.592 degrees (North through East) ! Clean map min=-0.0029132 max=0.06123 Jy/beam ! Writing clean map to FITS file: J1753-1843_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0612298 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000224753 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.10119 1.10119 2.20238 4.40477 8.80953 17.6191 35.2381 70.4763 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.071 x 10.57 at -1.592 degrees (North through East) ! Clean map min=-0.0029132 max=0.06123 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1753-1843_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:32:47 2019