! Started logfile: J1752-2956_S_2017_09_26_pus_uvs.log on Sat May 11 13:04:00 2019 obs J1752-2956_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1752-2956_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.514078 visibilities/baseline/integration-bin. ! Found source: J1752-2956 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 21764 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1752-2956_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 872 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 891 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 891 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2176 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.974856Jy sigma=0.006552 ! Fit after self-cal, rms=0.930533Jy sigma=0.006262 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=24.97 mas, bpa=-20.96 degrees ! Estimated noise=1884.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0504969 Jy ! Component: 100 - total flux cleaned = 0.0634922 Jy ! Total flux subtracted in 100 components = 0.0634922 Jy ! Clean residual min=-0.005034 max=0.006125 Jy/beam ! Clean residual mean=0.000020 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.0634922 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0634922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101220Jy sigma=0.000643 ! Fit after self-cal, rms=0.100511Jy sigma=0.000639 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.116 mas, bmaj=29.29 mas, bpa=-19.58 degrees ! Estimated noise=893.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153076 Jy ! Component: 100 - total flux cleaned = 0.0240279 Jy ! Component: 150 - total flux cleaned = 0.029608 Jy ! Component: 200 - total flux cleaned = 0.0334163 Jy ! Total flux subtracted in 200 components = 0.0334163 Jy ! Clean residual min=-0.004237 max=0.005190 Jy/beam ! Clean residual mean=-0.000008 rms=0.001610 Jy/beam ! Combined flux in latest and established models = 0.0969085 Jy ! Performing phase self-cal ! Adding 109 model components to the UV plane model. ! The established model now contains 125 components and 0.0969085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098181Jy sigma=0.000621 ! Fit after self-cal, rms=0.098082Jy sigma=0.000619 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.06 KP 1.06 ! LA 0.93 MK 1.03 NL 1.00* OV 1.11 ! PT 0.99 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.10 KP 1.00 ! LA 0.89 MK 1.08 NL 1.01 OV 1.11 ! PT 0.92 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.98 KP 1.05 ! LA 0.89 MK 1.10 NL 0.95 OV 1.03 ! PT 0.87 ! ! ! Correcting IF 4. ! A total of 186 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.92 KP 1.00* ! LA 0.82 MK 1.00* NL 1.00* OV 1.00* ! PT 0.98 ! ! ! Fit before self-cal, rms=0.098082Jy sigma=0.000619 ! Fit after self-cal, rms=0.097786Jy sigma=0.000618 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.197 mas, bmaj=29.77 mas, bpa=-19.48 degrees ! Estimated noise=890.251 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250671 Jy ! Component: 100 - total flux cleaned = 0.00318631 Jy ! Component: 150 - total flux cleaned = 0.00354525 Jy ! Component: 200 - total flux cleaned = 0.00390198 Jy ! Total flux subtracted in 200 components = 0.00390198 Jy ! Clean residual min=-0.003152 max=0.004434 Jy/beam ! Clean residual mean=0.000011 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.10081 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 137 components and 0.10081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097703Jy sigma=0.000617 ! Fit after self-cal, rms=0.097873Jy sigma=0.000617 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097873Jy sigma=0.000617 ! Fit after self-cal, rms=0.098441Jy sigma=0.000616 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.186 mas, bmaj=29.99 mas, bpa=-19.55 degrees ! Estimated noise=897.572 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190999 Jy ! Component: 100 - total flux cleaned = 0.00244641 Jy ! Component: 150 - total flux cleaned = 0.00271052 Jy ! Component: 200 - total flux cleaned = 0.00290284 Jy ! Total flux subtracted in 200 components = 0.00290284 Jy ! Clean residual min=-0.002530 max=0.003743 Jy/beam ! Clean residual mean=0.000005 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.103713 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 154 components and 0.103713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098396Jy sigma=0.000616 ! Fit after self-cal, rms=0.098424Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (117, 32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346237 Jy ! Component: 100 - total flux cleaned = 0.00456403 Jy ! Component: 150 - total flux cleaned = 0.0048181 Jy ! Component: 200 - total flux cleaned = 0.00505755 Jy ! Total flux subtracted in 200 components = 0.00505755 Jy ! Clean residual min=-0.002141 max=0.002041 Jy/beam ! Clean residual mean=0.000000 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.108771 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 192 components and 0.108771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098299Jy sigma=0.000615 ! Fit after self-cal, rms=0.098221Jy sigma=0.000614 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098221Jy sigma=0.000614 ! Fit after self-cal, rms=0.097798Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.163 mas, bmaj=30 mas, bpa=-19.55 degrees ! Estimated noise=895.327 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195638 Jy ! Component: 100 - total flux cleaned = 0.00259365 Jy ! Component: 150 - total flux cleaned = 0.00278169 Jy ! Component: 200 - total flux cleaned = 0.00291841 Jy ! Total flux subtracted in 200 components = 0.00291841 Jy ! Clean residual min=-0.002111 max=0.002021 Jy/beam ! Clean residual mean=0.000002 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.111689 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 217 components and 0.111689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097752Jy sigma=0.000614 ! Fit after self-cal, rms=0.097726Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000860541 Jy ! Component: 100 - total flux cleaned = 0.000916115 Jy ! Component: 150 - total flux cleaned = 0.00106586 Jy ! Component: 200 - total flux cleaned = 0.00113502 Jy ! Total flux subtracted in 200 components = 0.00113502 Jy ! Clean residual min=-0.002014 max=0.001928 Jy/beam ! Clean residual mean=0.000002 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.112824 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 233 components and 0.112824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097707Jy sigma=0.000614 ! Fit after self-cal, rms=0.097699Jy sigma=0.000614 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097699Jy sigma=0.000614 ! Fit after self-cal, rms=0.097379Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.22 mas, bmaj=38.61 mas, bpa=-9.67 degrees ! Estimated noise=949.091 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000964799 Jy ! Component: 100 - total flux cleaned = 0.00112186 Jy ! Component: 150 - total flux cleaned = 0.00116763 Jy ! Component: 200 - total flux cleaned = 0.00118873 Jy ! Total flux subtracted in 200 components = 0.00118873 Jy ! Clean residual min=-0.001959 max=0.002030 Jy/beam ! Clean residual mean=0.000007 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.114013 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 265 components and 0.114013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097368Jy sigma=0.000614 ! Fit after self-cal, rms=0.097356Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000248947 Jy ! Component: 100 - total flux cleaned = 0.000288596 Jy ! Component: 150 - total flux cleaned = 0.000325862 Jy ! Component: 200 - total flux cleaned = 0.000342991 Jy ! Total flux subtracted in 200 components = 0.000342991 Jy ! Clean residual min=-0.001918 max=0.002000 Jy/beam ! Clean residual mean=0.000007 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.114356 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 277 components and 0.114356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097349Jy sigma=0.000613 ! Fit after self-cal, rms=0.097348Jy sigma=0.000613 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.145 mas, bmaj=29.95 mas, bpa=-19.54 degrees ! Estimated noise=894.084 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.145 x 29.95 at -19.54 degrees (North through East) ! Clean map min=-0.0019035 max=0.06504 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.33 mas, bmaj=25.25 mas, bpa=-20.8 degrees ! Estimated noise=1874.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.049515 Jy ! Component: 100 - total flux cleaned = 0.0637266 Jy ! Component: 150 - total flux cleaned = 0.0726973 Jy ! Component: 200 - total flux cleaned = 0.0794552 Jy ! Total flux subtracted in 200 components = 0.0794552 Jy ! Clean residual min=-0.004302 max=0.004199 Jy/beam ! Clean residual mean=0.000019 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 0.0794552 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.0794552 Jy ! Inverting map and beam ! Estimated beam: bmin=5.145 mas, bmaj=29.95 mas, bpa=-19.54 degrees ! Estimated noise=894.084 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106221 Jy ! Component: 100 - total flux cleaned = 0.017289 Jy ! Component: 150 - total flux cleaned = 0.0219798 Jy ! Component: 200 - total flux cleaned = 0.0254384 Jy ! Total flux subtracted in 200 components = 0.0254384 Jy ! Clean residual min=-0.002512 max=0.002704 Jy/beam ! Clean residual mean=0.000009 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.104894 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 118 components and 0.104894 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.22 mas, bmaj=38.61 mas, bpa=-9.67 degrees ! Estimated noise=949.091 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307489 Jy ! Component: 100 - total flux cleaned = 0.00509546 Jy ! Component: 150 - total flux cleaned = 0.00622633 Jy ! Component: 200 - total flux cleaned = 0.00710645 Jy ! Total flux subtracted in 200 components = 0.00710645 Jy ! Clean residual min=-0.002058 max=0.002279 Jy/beam ! Clean residual mean=0.000005 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.112 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000656137 Jy ! Component: 100 - total flux cleaned = 0.000867243 Jy ! Component: 150 - total flux cleaned = 0.000928164 Jy ! Component: 200 - total flux cleaned = 0.000982059 Jy ! Total flux subtracted in 200 components = 0.000982059 Jy ! Clean residual min=-0.001981 max=0.002183 Jy/beam ! Clean residual mean=0.000005 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.112982 Jy ! Adding 118 model components to the UV plane model. ! The established model now contains 217 components and 0.112982 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.145 mas, bmaj=29.95 mas, bpa=-19.54 degrees ! Estimated noise=894.084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.92919e-05 Jy ! Component: 100 - total flux cleaned = 1.69634e-06 Jy ! Component: 150 - total flux cleaned = 3.0423e-05 Jy ! Component: 200 - total flux cleaned = 8.48153e-05 Jy ! Total flux subtracted in 200 components = 8.48153e-05 Jy ! Clean residual min=-0.001987 max=0.002128 Jy/beam ! Clean residual mean=0.000003 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.113067 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 241 components and 0.113067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097360Jy sigma=0.000614 ! Fit after self-cal, rms=0.097353Jy sigma=0.000613 wmodel J1752-2956_S_2017_09_26_pus_map.mod ! Writing 241 model components to file: J1752-2956_S_2017_09_26_pus_map.mod wobs J1752-2956_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1752-2956_S_2017_09_26_pus_uvs.fits wwins J1752-2956_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J1752-2956_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.38608e-05 Jy ! Component: 100 - total flux cleaned = 0.000242829 Jy ! Component: 150 - total flux cleaned = 0.000243035 Jy ! Component: 200 - total flux cleaned = 0.000217475 Jy ! Component: 250 - total flux cleaned = 0.000241162 Jy ! Component: 300 - total flux cleaned = 0.000149048 Jy ! Component: 350 - total flux cleaned = 0.000105196 Jy ! Component: 400 - total flux cleaned = 4.22789e-05 Jy ! Component: 450 - total flux cleaned = 2.2946e-05 Jy ! Component: 500 - total flux cleaned = 2.3404e-05 Jy ! Component: 550 - total flux cleaned = -6.84893e-05 Jy ! Component: 600 - total flux cleaned = -0.000122136 Jy ! Component: 650 - total flux cleaned = -0.000174111 Jy ! Component: 700 - total flux cleaned = -0.000241831 Jy ! Component: 750 - total flux cleaned = -0.000242137 Jy ! Component: 800 - total flux cleaned = -0.000290419 Jy ! Component: 850 - total flux cleaned = -0.000337114 Jy ! Component: 900 - total flux cleaned = -0.00038258 Jy ! Component: 950 - total flux cleaned = -0.000411946 Jy ! Component: 1000 - total flux cleaned = -0.000454702 Jy ! Component: 1050 - total flux cleaned = -0.000440355 Jy ! Component: 1100 - total flux cleaned = -0.000399268 Jy ! Component: 1150 - total flux cleaned = -0.000358954 Jy ! Component: 1200 - total flux cleaned = -0.000359103 Jy ! Component: 1250 - total flux cleaned = -0.00033271 Jy ! Component: 1300 - total flux cleaned = -0.000294222 Jy ! Component: 1350 - total flux cleaned = -0.000281544 Jy ! Component: 1400 - total flux cleaned = -0.00024417 Jy ! Component: 1450 - total flux cleaned = -0.000219428 Jy ! Component: 1500 - total flux cleaned = -0.000158329 Jy ! Component: 1550 - total flux cleaned = -9.78548e-05 Jy ! Component: 1600 - total flux cleaned = -4.98575e-05 Jy ! Component: 1650 - total flux cleaned = 2.16392e-05 Jy ! Component: 1700 - total flux cleaned = 5.69713e-05 Jy ! Component: 1750 - total flux cleaned = 0.000115517 Jy ! Component: 1800 - total flux cleaned = 0.000173504 Jy ! Component: 1850 - total flux cleaned = 0.000231096 Jy ! Component: 1900 - total flux cleaned = 0.000299708 Jy ! Component: 1950 - total flux cleaned = 0.000356479 Jy ! Component: 2000 - total flux cleaned = 0.000435432 Jy ! Component: 2050 - total flux cleaned = 0.000536327 Jy ! Component: 2100 - total flux cleaned = 0.000591896 Jy ! Component: 2150 - total flux cleaned = 0.00063622 Jy ! Component: 2200 - total flux cleaned = 0.000713458 Jy ! Component: 2250 - total flux cleaned = 0.000768419 Jy ! Component: 2300 - total flux cleaned = 0.00083404 Jy ! Component: 2350 - total flux cleaned = 0.000866708 Jy ! Component: 2400 - total flux cleaned = 0.000931819 Jy ! Component: 2450 - total flux cleaned = 0.000942645 Jy ! Component: 2500 - total flux cleaned = 0.00101843 Jy ! Component: 2550 - total flux cleaned = 0.001105 Jy ! Component: 2600 - total flux cleaned = 0.00112669 Jy ! Component: 2650 - total flux cleaned = 0.00118089 Jy ! Component: 2700 - total flux cleaned = 0.00120263 Jy ! Component: 2750 - total flux cleaned = 0.00120265 Jy ! Component: 2800 - total flux cleaned = 0.00123535 Jy ! Component: 2850 - total flux cleaned = 0.00126828 Jy ! Component: 2900 - total flux cleaned = 0.00127928 Jy ! Component: 2950 - total flux cleaned = 0.00130148 Jy ! Component: 3000 - total flux cleaned = 0.00131263 Jy ! Component: 3050 - total flux cleaned = 0.00134604 Jy ! Component: 3100 - total flux cleaned = 0.00136835 Jy ! Component: 3150 - total flux cleaned = 0.00140218 Jy ! Component: 3200 - total flux cleaned = 0.00139094 Jy ! Component: 3250 - total flux cleaned = 0.00144765 Jy ! Component: 3300 - total flux cleaned = 0.0014932 Jy ! Component: 3350 - total flux cleaned = 0.00152759 Jy ! Component: 3400 - total flux cleaned = 0.00158521 Jy ! Component: 3450 - total flux cleaned = 0.00160843 Jy ! Component: 3500 - total flux cleaned = 0.00165519 Jy ! Component: 3550 - total flux cleaned = 0.00169025 Jy ! Component: 3600 - total flux cleaned = 0.00173732 Jy ! Component: 3650 - total flux cleaned = 0.00174918 Jy ! Component: 3700 - total flux cleaned = 0.00182069 Jy ! Component: 3750 - total flux cleaned = 0.00184469 Jy ! Component: 3800 - total flux cleaned = 0.00191682 Jy ! Component: 3850 - total flux cleaned = 0.00195321 Jy ! Component: 3900 - total flux cleaned = 0.00200189 Jy ! Component: 3950 - total flux cleaned = 0.0020631 Jy ! Component: 4000 - total flux cleaned = 0.0021124 Jy ! Component: 4050 - total flux cleaned = 0.00214952 Jy ! Total flux subtracted in 4096 components = 0.00219946 Jy ! Clean residual min=-0.000729 max=0.000724 Jy/beam ! Clean residual mean=0.000011 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.115266 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 534 components and 0.115266 Jy ![Exited script file: muppet] wmap "J1752-2956_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.145 x 29.95 at -19.54 degrees (North through East) ! Clean map min=-0.0021017 max=0.064686 Jy/beam ! Writing clean map to FITS file: J1752-2956_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0646856 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000276353 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.28167 1.28167 2.56335 5.1267 10.2534 20.5068 41.0136 82.0271 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.145 x 29.95 at -19.54 degrees (North through East) ! Clean map min=-0.0021017 max=0.064686 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1752-2956_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:04:06 2019