! Started logfile: J1752-1011_S_2017_02_24_pus_uvs.log on Sat May 4 11:32:35 2019 obs J1752-1011_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1752-1011_S_2017_02_24_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.707018 visibilities/baseline/integration-bin. ! Found source: J1752-1011 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 14508 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1752-1011_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 281 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 267 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 556 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.926239Jy sigma=0.036054 ! Fit after self-cal, rms=0.905492Jy sigma=0.036010 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.056 mas, bmaj=9.996 mas, bpa=2.517 degrees ! Estimated noise=1097.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0528255 Jy ! Component: 100 - total flux cleaned = 0.070073 Jy ! Total flux subtracted in 100 components = 0.070073 Jy ! Clean residual min=-0.011396 max=0.014777 Jy/beam ! Clean residual mean=-0.000052 rms=0.004162 Jy/beam ! Combined flux in latest and established models = 0.070073 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.070073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111862Jy sigma=0.002463 ! Fit after self-cal, rms=0.111729Jy sigma=0.002462 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.979 mas, bmaj=13.7 mas, bpa=1.998 degrees ! Estimated noise=621.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01571 Jy ! Component: 100 - total flux cleaned = 0.0230873 Jy ! Component: 150 - total flux cleaned = 0.0251386 Jy ! Component: 200 - total flux cleaned = 0.0257457 Jy ! Total flux subtracted in 200 components = 0.0257457 Jy ! Clean residual min=-0.018962 max=0.024315 Jy/beam ! Clean residual mean=-0.000102 rms=0.007150 Jy/beam ! Combined flux in latest and established models = 0.0958188 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 47 components and 0.0958188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104693Jy sigma=0.003086 ! Fit after self-cal, rms=0.104538Jy sigma=0.003086 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.87 HN 1.64 KP 0.71 ! LA 0.65 MK 1.87 NL 1.07 OV 1.00 ! PT 0.68 SC 1.28 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.78 HN 1.56 KP 0.69 ! LA 0.62 MK 1.00* NL 1.00 OV 1.12 ! PT 0.64 SC 1.68 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.81 HN 1.57 KP 0.76 ! LA 0.68 MK 1.00* NL 1.16 OV 0.99 ! PT 0.65 SC 1.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.85 HN 0.91 KP 1.00* ! LA 29.30 MK 1.00* NL 1.00* OV 0.93 ! PT 0.81 SC 1.00* ! ! ! Fit before self-cal, rms=0.104538Jy sigma=0.003086 ! Fit after self-cal, rms=0.800656Jy sigma=0.000741 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.281 mas, bmaj=14.02 mas, bpa=3.598 degrees ! Estimated noise=648.873 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00851529 Jy ! Component: 100 - total flux cleaned = 0.0117776 Jy ! Component: 150 - total flux cleaned = 0.0120942 Jy ! Component: 200 - total flux cleaned = 0.0123692 Jy ! Total flux subtracted in 200 components = 0.0123692 Jy ! Clean residual min=-0.004570 max=0.005864 Jy/beam ! Clean residual mean=0.000014 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 0.108188 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 0.108188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.799795Jy sigma=0.000736 ! Fit after self-cal, rms=0.800573Jy sigma=0.000726 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.800573Jy sigma=0.000726 ! Fit after self-cal, rms=0.979804Jy sigma=0.000720 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.981 mas, bmaj=13.57 mas, bpa=4.374 degrees ! Estimated noise=651.294 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00559968 Jy ! Component: 100 - total flux cleaned = 0.0086021 Jy ! Component: 150 - total flux cleaned = 0.0103789 Jy ! Component: 200 - total flux cleaned = 0.0111448 Jy ! Total flux subtracted in 200 components = 0.0111448 Jy ! Clean residual min=-0.004195 max=0.004689 Jy/beam ! Clean residual mean=0.000016 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.119333 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 93 components and 0.119333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.979114Jy sigma=0.000720 ! Fit after self-cal, rms=0.979168Jy sigma=0.000719 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197701 Jy ! Component: 100 - total flux cleaned = 0.00209948 Jy ! Component: 150 - total flux cleaned = 0.00210116 Jy ! Component: 200 - total flux cleaned = 0.0021975 Jy ! Total flux subtracted in 200 components = 0.0021975 Jy ! Clean residual min=-0.003941 max=0.004684 Jy/beam ! Clean residual mean=0.000015 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 0.12153 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 111 components and 0.12153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.979062Jy sigma=0.000719 ! Fit after self-cal, rms=0.979059Jy sigma=0.000718 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.979059Jy sigma=0.000718 ! Fit after self-cal, rms=0.080807Jy sigma=0.000686 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.81 mas, bmaj=13.44 mas, bpa=4.265 degrees ! Estimated noise=639.029 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002001 Jy ! Component: 100 - total flux cleaned = 0.00231496 Jy ! Component: 150 - total flux cleaned = 0.00240434 Jy ! Component: 200 - total flux cleaned = 0.00252405 Jy ! Total flux subtracted in 200 components = 0.00252405 Jy ! Clean residual min=-0.002375 max=0.002998 Jy/beam ! Clean residual mean=0.000004 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.124054 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 129 components and 0.124054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080707Jy sigma=0.000685 ! Fit after self-cal, rms=0.080408Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, -37.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289423 Jy ! Component: 100 - total flux cleaned = 0.00318765 Jy ! Component: 150 - total flux cleaned = 0.00324054 Jy ! Component: 200 - total flux cleaned = 0.00338641 Jy ! Total flux subtracted in 200 components = 0.00338641 Jy ! Clean residual min=-0.002090 max=0.002638 Jy/beam ! Clean residual mean=0.000003 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.127441 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 161 components and 0.127441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080254Jy sigma=0.000682 ! Fit after self-cal, rms=0.080180Jy sigma=0.000682 ! Inverting map ! Added new window around map position (-56, -126). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229864 Jy ! Component: 100 - total flux cleaned = 0.00323166 Jy ! Component: 150 - total flux cleaned = 0.00357484 Jy ! Component: 200 - total flux cleaned = 0.00357651 Jy ! Total flux subtracted in 200 components = 0.00357651 Jy ! Clean residual min=-0.001916 max=0.002217 Jy/beam ! Clean residual mean=0.000002 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.131017 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 181 components and 0.131017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080053Jy sigma=0.000681 ! Fit after self-cal, rms=0.080027Jy sigma=0.000681 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080027Jy sigma=0.000681 ! Fit after self-cal, rms=0.077728Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.31 mas, bmaj=16.75 mas, bpa=5.425 degrees ! Estimated noise=643.146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176305 Jy ! Component: 100 - total flux cleaned = 0.00293148 Jy ! Component: 150 - total flux cleaned = 0.00370442 Jy ! Component: 200 - total flux cleaned = 0.00419645 Jy ! Total flux subtracted in 200 components = 0.00419645 Jy ! Clean residual min=-0.001996 max=0.001778 Jy/beam ! Clean residual mean=0.000003 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.135214 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 212 components and 0.135214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077666Jy sigma=0.000680 ! Fit after self-cal, rms=0.077615Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000586725 Jy ! Component: 100 - total flux cleaned = 0.000902716 Jy ! Component: 150 - total flux cleaned = 0.00117527 Jy ! Component: 200 - total flux cleaned = 0.00137163 Jy ! Total flux subtracted in 200 components = 0.00137163 Jy ! Clean residual min=-0.001923 max=0.001687 Jy/beam ! Clean residual mean=0.000002 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.136585 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 239 components and 0.136585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077589Jy sigma=0.000680 ! Fit after self-cal, rms=0.077580Jy sigma=0.000680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.722 mas, bmaj=13.36 mas, bpa=4.212 degrees ! Estimated noise=631.385 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.722 x 13.36 at 4.212 degrees (North through East) ! Clean map min=-0.0019729 max=0.071629 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.021 mas, bmaj=10.16 mas, bpa=5.795 degrees ! Estimated noise=1060.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0517618 Jy ! Component: 100 - total flux cleaned = 0.0751684 Jy ! Component: 150 - total flux cleaned = 0.0898002 Jy ! Component: 200 - total flux cleaned = 0.0995974 Jy ! Total flux subtracted in 200 components = 0.0995974 Jy ! Clean residual min=-0.004381 max=0.005462 Jy/beam ! Clean residual mean=0.000004 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 0.0995974 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.0995974 Jy ! Inverting map and beam ! Estimated beam: bmin=5.722 mas, bmaj=13.36 mas, bpa=4.212 degrees ! Estimated noise=631.385 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00998749 Jy ! Component: 100 - total flux cleaned = 0.0160493 Jy ! Component: 150 - total flux cleaned = 0.020599 Jy ! Component: 200 - total flux cleaned = 0.0242316 Jy ! Total flux subtracted in 200 components = 0.0242316 Jy ! Clean residual min=-0.002631 max=0.002698 Jy/beam ! Clean residual mean=0.000006 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.123829 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 80 components and 0.123829 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.31 mas, bmaj=16.75 mas, bpa=5.425 degrees ! Estimated noise=643.146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349254 Jy ! Component: 100 - total flux cleaned = 0.00612646 Jy ! Component: 150 - total flux cleaned = 0.00789022 Jy ! Component: 200 - total flux cleaned = 0.00899988 Jy ! Total flux subtracted in 200 components = 0.00899988 Jy ! Clean residual min=-0.002048 max=0.002117 Jy/beam ! Clean residual mean=0.000004 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.132829 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00099294 Jy ! Component: 100 - total flux cleaned = 0.0018289 Jy ! Component: 150 - total flux cleaned = 0.00242036 Jy ! Component: 200 - total flux cleaned = 0.00260857 Jy ! Total flux subtracted in 200 components = 0.00260857 Jy ! Clean residual min=-0.001919 max=0.001885 Jy/beam ! Clean residual mean=0.000003 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.135438 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 164 components and 0.135437 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.722 mas, bmaj=13.36 mas, bpa=4.212 degrees ! Estimated noise=631.385 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.16874e-05 Jy ! Component: 100 - total flux cleaned = -1.82906e-06 Jy ! Component: 150 - total flux cleaned = 7.99405e-05 Jy ! Component: 200 - total flux cleaned = 0.000230303 Jy ! Total flux subtracted in 200 components = 0.000230303 Jy ! Clean residual min=-0.001734 max=0.001777 Jy/beam ! Clean residual mean=0.000001 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.135668 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 185 components and 0.135668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077647Jy sigma=0.000680 ! Fit after self-cal, rms=0.077596Jy sigma=0.000680 wmodel J1752-1011_S_2017_02_24_pus_map.mod ! Writing 185 model components to file: J1752-1011_S_2017_02_24_pus_map.mod wobs J1752-1011_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1752-1011_S_2017_02_24_pus_uvs.fits wwins J1752-1011_S_2017_02_24_pus_map.win ! wwins: Wrote 4 windows to J1752-1011_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.8107e-07 Jy ! Component: 100 - total flux cleaned = -3.21495e-05 Jy ! Component: 150 - total flux cleaned = -0.000117032 Jy ! Component: 200 - total flux cleaned = -0.000224663 Jy ! Component: 250 - total flux cleaned = -0.000301064 Jy ! Component: 300 - total flux cleaned = -0.000448821 Jy ! Component: 350 - total flux cleaned = -0.000615068 Jy ! Component: 400 - total flux cleaned = -0.000753038 Jy ! Component: 450 - total flux cleaned = -0.00093116 Jy ! Component: 500 - total flux cleaned = -0.000974328 Jy ! Component: 550 - total flux cleaned = -0.00108001 Jy ! Component: 600 - total flux cleaned = -0.00118268 Jy ! Component: 650 - total flux cleaned = -0.00128254 Jy ! Component: 700 - total flux cleaned = -0.00134109 Jy ! Component: 750 - total flux cleaned = -0.00145568 Jy ! Component: 800 - total flux cleaned = -0.00149351 Jy ! Component: 850 - total flux cleaned = -0.00154885 Jy ! Component: 900 - total flux cleaned = -0.00158495 Jy ! Component: 950 - total flux cleaned = -0.00163877 Jy ! Component: 1000 - total flux cleaned = -0.00169103 Jy ! Component: 1050 - total flux cleaned = -0.00170851 Jy ! Component: 1100 - total flux cleaned = -0.00175983 Jy ! Component: 1150 - total flux cleaned = -0.00181047 Jy ! Component: 1200 - total flux cleaned = -0.00189316 Jy ! Component: 1250 - total flux cleaned = -0.0018932 Jy ! Component: 1300 - total flux cleaned = -0.00195789 Jy ! Component: 1350 - total flux cleaned = -0.00194213 Jy ! Component: 1400 - total flux cleaned = -0.00203709 Jy ! Component: 1450 - total flux cleaned = -0.00208391 Jy ! Component: 1500 - total flux cleaned = -0.00213019 Jy ! Component: 1550 - total flux cleaned = -0.00217591 Jy ! Component: 1600 - total flux cleaned = -0.00220583 Jy ! Component: 1650 - total flux cleaned = -0.00219098 Jy ! Component: 1700 - total flux cleaned = -0.00222076 Jy ! Component: 1750 - total flux cleaned = -0.00223541 Jy ! Component: 1800 - total flux cleaned = -0.00224994 Jy ! Component: 1850 - total flux cleaned = -0.0022069 Jy ! Component: 1900 - total flux cleaned = -0.00220702 Jy ! Component: 1950 - total flux cleaned = -0.00219282 Jy ! Component: 2000 - total flux cleaned = -0.00215092 Jy ! Component: 2050 - total flux cleaned = -0.00219252 Jy ! Component: 2100 - total flux cleaned = -0.00219253 Jy ! Component: 2150 - total flux cleaned = -0.00217902 Jy ! Component: 2200 - total flux cleaned = -0.00217927 Jy ! Component: 2250 - total flux cleaned = -0.00223289 Jy ! Component: 2300 - total flux cleaned = -0.002193 Jy ! Component: 2350 - total flux cleaned = -0.00224575 Jy ! Component: 2400 - total flux cleaned = -0.00224567 Jy ! Component: 2450 - total flux cleaned = -0.00228466 Jy ! Component: 2500 - total flux cleaned = -0.00229756 Jy ! Component: 2550 - total flux cleaned = -0.0023102 Jy ! Component: 2600 - total flux cleaned = -0.00234813 Jy ! Component: 2650 - total flux cleaned = -0.00234798 Jy ! Component: 2700 - total flux cleaned = -0.00236032 Jy ! Component: 2750 - total flux cleaned = -0.00237267 Jy ! Component: 2800 - total flux cleaned = -0.00240938 Jy ! Component: 2850 - total flux cleaned = -0.00236065 Jy ! Component: 2900 - total flux cleaned = -0.00240892 Jy ! Component: 2950 - total flux cleaned = -0.00242086 Jy ! Component: 3000 - total flux cleaned = -0.00242099 Jy ! Component: 3050 - total flux cleaned = -0.00243271 Jy ! Component: 3100 - total flux cleaned = -0.00244433 Jy ! Component: 3150 - total flux cleaned = -0.00242108 Jy ! Component: 3200 - total flux cleaned = -0.00240967 Jy ! Component: 3250 - total flux cleaned = -0.00243258 Jy ! Component: 3300 - total flux cleaned = -0.0024213 Jy ! Component: 3350 - total flux cleaned = -0.00241004 Jy ! Component: 3400 - total flux cleaned = -0.00241005 Jy ! Component: 3450 - total flux cleaned = -0.00239897 Jy ! Component: 3500 - total flux cleaned = -0.00243212 Jy ! Component: 3550 - total flux cleaned = -0.00239933 Jy ! Component: 3600 - total flux cleaned = -0.00242099 Jy ! Component: 3650 - total flux cleaned = -0.00241026 Jy ! Component: 3700 - total flux cleaned = -0.00241019 Jy ! Component: 3750 - total flux cleaned = -0.00243152 Jy ! Component: 3800 - total flux cleaned = -0.00247391 Jy ! Component: 3850 - total flux cleaned = -0.00243182 Jy ! Component: 3900 - total flux cleaned = -0.00246314 Jy ! Component: 3950 - total flux cleaned = -0.00247354 Jy ! Component: 4000 - total flux cleaned = -0.0024942 Jy ! Component: 4050 - total flux cleaned = -0.00247362 Jy ! Total flux subtracted in 4096 components = -0.00247362 Jy ! Clean residual min=-0.000724 max=0.000636 Jy/beam ! Clean residual mean=0.000002 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.133194 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 449 components and 0.133194 Jy ![Exited script file: muppet] wmap "J1752-1011_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.722 x 13.36 at 4.212 degrees (North through East) ! Clean map min=-0.0016633 max=0.071199 Jy/beam ! Writing clean map to FITS file: J1752-1011_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0711989 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00020051 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.844858 0.844858 1.68972 3.37943 6.75887 13.5177 27.0355 54.0709 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.722 x 13.36 at 4.212 degrees (North through East) ! Clean map min=-0.0016633 max=0.071199 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1752-1011_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:32:41 2019