! Started logfile: J1751-1950_S_2017_10_21_pus_uvs.log on Sat May 11 21:03:20 2019 obs J1751-1950_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1751-1950_S_2017_10_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.615868 visibilities/baseline/integration-bin. ! Found source: J1751-1950 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 12948 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1751-1950_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 278 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 308 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 308 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 851 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.998340Jy sigma=0.008359 ! Fit after self-cal, rms=0.949866Jy sigma=0.007964 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.761 mas, bmaj=15.37 mas, bpa=-17.26 degrees ! Estimated noise=1294.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0382227 Jy ! Component: 100 - total flux cleaned = 0.0474817 Jy ! Total flux subtracted in 100 components = 0.0474817 Jy ! Clean residual min=-0.004421 max=0.005455 Jy/beam ! Clean residual mean=0.000002 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 0.0474817 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0474817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087515Jy sigma=0.000687 ! Fit after self-cal, rms=0.086532Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=18.37 mas, bpa=-15.67 degrees ! Estimated noise=854.374 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0086875 Jy ! Component: 100 - total flux cleaned = 0.0129489 Jy ! Component: 150 - total flux cleaned = 0.0155054 Jy ! Component: 200 - total flux cleaned = 0.0171605 Jy ! Total flux subtracted in 200 components = 0.0171605 Jy ! Clean residual min=-0.003885 max=0.003681 Jy/beam ! Clean residual mean=-0.000006 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.0646421 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 87 components and 0.0646422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085600Jy sigma=0.000672 ! Fit after self-cal, rms=0.085572Jy sigma=0.000671 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.04 KP 1.20 ! LA 1.01 MK 1.14 NL 0.94 OV 1.22 ! PT 0.83 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.07 KP 1.12 ! LA 1.02 MK 1.08 NL 1.13 OV 1.08 ! PT 0.81 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.04 KP 1.12 ! LA 0.83 MK 1.15 NL 1.26 OV 1.03 ! PT 0.78 ! ! ! Correcting IF 4. ! A total of 258 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.89 KP 1.00* ! LA 0.75 MK 0.82 NL 1.00* OV 1.00* ! PT 0.71 ! ! ! Fit before self-cal, rms=0.085572Jy sigma=0.000671 ! Fit after self-cal, rms=0.085239Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.967 mas, bmaj=18.83 mas, bpa=-15.32 degrees ! Estimated noise=878.959 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000459596 Jy ! Component: 100 - total flux cleaned = -0.000461092 Jy ! Component: 150 - total flux cleaned = -0.000511794 Jy ! Component: 200 - total flux cleaned = -0.000553284 Jy ! Total flux subtracted in 200 components = -0.000553284 Jy ! Clean residual min=-0.001754 max=0.001576 Jy/beam ! Clean residual mean=0.000005 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.0640889 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 100 components and 0.0640889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085218Jy sigma=0.000666 ! Fit after self-cal, rms=0.085746Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085746Jy sigma=0.000663 ! Fit after self-cal, rms=0.088399Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4 mas, bmaj=18.78 mas, bpa=-15.68 degrees ! Estimated noise=882.303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.63793e-05 Jy ! Component: 100 - total flux cleaned = -3.50364e-05 Jy ! Component: 150 - total flux cleaned = -3.41284e-05 Jy ! Component: 200 - total flux cleaned = -3.33946e-05 Jy ! Total flux subtracted in 200 components = -3.33946e-05 Jy ! Clean residual min=-0.001885 max=0.001780 Jy/beam ! Clean residual mean=0.000004 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0640555 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 112 components and 0.0640555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088390Jy sigma=0.000662 ! Fit after self-cal, rms=0.088926Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.76587e-05 Jy ! Component: 100 - total flux cleaned = 4.37841e-05 Jy ! Component: 150 - total flux cleaned = 4.27673e-05 Jy ! Component: 200 - total flux cleaned = 4.22789e-05 Jy ! Total flux subtracted in 200 components = 4.22789e-05 Jy ! Clean residual min=-0.002104 max=0.001636 Jy/beam ! Clean residual mean=0.000003 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.0640978 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 113 components and 0.0640978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088913Jy sigma=0.000661 ! Fit after self-cal, rms=0.088925Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088925Jy sigma=0.000661 ! Fit after self-cal, rms=0.090919Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.997 mas, bmaj=18.78 mas, bpa=-15.69 degrees ! Estimated noise=883.945 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.1646e-05 Jy ! Component: 100 - total flux cleaned = 7.4273e-05 Jy ! Component: 150 - total flux cleaned = 7.48135e-05 Jy ! Component: 200 - total flux cleaned = 7.56237e-05 Jy ! Total flux subtracted in 200 components = 7.56237e-05 Jy ! Clean residual min=-0.001934 max=0.001842 Jy/beam ! Clean residual mean=0.000004 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.0641734 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 116 components and 0.0641734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090907Jy sigma=0.000661 ! Fit after self-cal, rms=0.091270Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.77638e-05 Jy ! Component: 100 - total flux cleaned = -0.000108662 Jy ! Component: 150 - total flux cleaned = -0.00014525 Jy ! Component: 200 - total flux cleaned = -0.000162564 Jy ! Total flux subtracted in 200 components = -0.000162564 Jy ! Clean residual min=-0.002003 max=0.001792 Jy/beam ! Clean residual mean=0.000004 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0640108 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 119 components and 0.0640108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091258Jy sigma=0.000660 ! Fit after self-cal, rms=0.091289Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091289Jy sigma=0.000660 ! Fit after self-cal, rms=0.092716Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.388 mas, bmaj=28.62 mas, bpa=-5.354 degrees ! Estimated noise=979.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.05011e-05 Jy ! Component: 100 - total flux cleaned = 2.22642e-05 Jy ! Component: 150 - total flux cleaned = 5.37422e-05 Jy ! Component: 200 - total flux cleaned = 7.18415e-05 Jy ! Total flux subtracted in 200 components = 7.18415e-05 Jy ! Clean residual min=-0.001683 max=0.001863 Jy/beam ! Clean residual mean=0.000007 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.0640827 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 130 components and 0.0640827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092709Jy sigma=0.000660 ! Fit after self-cal, rms=0.092910Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.87156e-05 Jy ! Component: 100 - total flux cleaned = -6.80564e-05 Jy ! Component: 150 - total flux cleaned = -7.6757e-05 Jy ! Component: 200 - total flux cleaned = -8.33814e-05 Jy ! Total flux subtracted in 200 components = -8.33814e-05 Jy ! Clean residual min=-0.001543 max=0.001657 Jy/beam ! Clean residual mean=0.000006 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0639993 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 135 components and 0.0639993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092905Jy sigma=0.000660 ! Fit after self-cal, rms=0.092913Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.986 mas, bmaj=18.76 mas, bpa=-15.69 degrees ! Estimated noise=884.54 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.986 x 18.76 at -15.69 degrees (North through East) ! Clean map min=-0.0029732 max=0.050427 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.799 mas, bmaj=15.56 mas, bpa=-17.15 degrees ! Estimated noise=1391.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383879 Jy ! Component: 100 - total flux cleaned = 0.0485365 Jy ! Component: 150 - total flux cleaned = 0.0543761 Jy ! Component: 200 - total flux cleaned = 0.0583605 Jy ! Total flux subtracted in 200 components = 0.0583605 Jy ! Clean residual min=-0.003808 max=0.003439 Jy/beam ! Clean residual mean=0.000003 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.0583605 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.0583605 Jy ! Inverting map and beam ! Estimated beam: bmin=3.986 mas, bmaj=18.76 mas, bpa=-15.69 degrees ! Estimated noise=884.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357167 Jy ! Component: 100 - total flux cleaned = 0.00412635 Jy ! Component: 150 - total flux cleaned = 0.00453421 Jy ! Component: 200 - total flux cleaned = 0.00484188 Jy ! Total flux subtracted in 200 components = 0.00484188 Jy ! Clean residual min=-0.002136 max=0.001878 Jy/beam ! Clean residual mean=0.000004 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0632024 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 56 components and 0.0632024 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.388 mas, bmaj=28.62 mas, bpa=-5.354 degrees ! Estimated noise=979.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00057505 Jy ! Component: 100 - total flux cleaned = 0.000665123 Jy ! Component: 150 - total flux cleaned = 0.000752269 Jy ! Component: 200 - total flux cleaned = 0.000807255 Jy ! Total flux subtracted in 200 components = 0.000807255 Jy ! Clean residual min=-0.001623 max=0.001666 Jy/beam ! Clean residual mean=0.000006 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.0640097 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.65792e-07 Jy ! Component: 100 - total flux cleaned = -9.95853e-06 Jy ! Component: 150 - total flux cleaned = -3.03642e-05 Jy ! Component: 200 - total flux cleaned = -4.96809e-05 Jy ! Total flux subtracted in 200 components = -4.96809e-05 Jy ! Clean residual min=-0.001607 max=0.001664 Jy/beam ! Clean residual mean=0.000006 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.06396 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 76 components and 0.06396 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.986 mas, bmaj=18.76 mas, bpa=-15.69 degrees ! Estimated noise=884.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.9298e-05 Jy ! Component: 100 - total flux cleaned = 4.43491e-05 Jy ! Component: 150 - total flux cleaned = 1.2852e-05 Jy ! Component: 200 - total flux cleaned = -1.63901e-05 Jy ! Total flux subtracted in 200 components = -1.63901e-05 Jy ! Clean residual min=-0.002016 max=0.001869 Jy/beam ! Clean residual mean=0.000004 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.0639436 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 83 components and 0.0639436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092899Jy sigma=0.000660 ! Fit after self-cal, rms=0.092879Jy sigma=0.000660 wmodel J1751-1950_S_2017_10_21_pus_map.mod ! Writing 83 model components to file: J1751-1950_S_2017_10_21_pus_map.mod wobs J1751-1950_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1751-1950_S_2017_10_21_pus_uvs.fits wwins J1751-1950_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1751-1950_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000369484 Jy ! Component: 100 - total flux cleaned = -0.000565114 Jy ! Component: 150 - total flux cleaned = -0.000567374 Jy ! Component: 200 - total flux cleaned = -0.000539097 Jy ! Component: 250 - total flux cleaned = -0.000566605 Jy ! Component: 300 - total flux cleaned = -0.000643948 Jy ! Component: 350 - total flux cleaned = -0.000743331 Jy ! Component: 400 - total flux cleaned = -0.000791631 Jy ! Component: 450 - total flux cleaned = -0.000884243 Jy ! Component: 500 - total flux cleaned = -0.00106123 Jy ! Component: 550 - total flux cleaned = -0.00123373 Jy ! Component: 600 - total flux cleaned = -0.00148587 Jy ! Component: 650 - total flux cleaned = -0.00160884 Jy ! Component: 700 - total flux cleaned = -0.00174894 Jy ! Component: 750 - total flux cleaned = -0.00180745 Jy ! Component: 800 - total flux cleaned = -0.00180707 Jy ! Component: 850 - total flux cleaned = -0.00184422 Jy ! Component: 900 - total flux cleaned = -0.00186228 Jy ! Component: 950 - total flux cleaned = -0.0019347 Jy ! Component: 1000 - total flux cleaned = -0.0020056 Jy ! Component: 1050 - total flux cleaned = -0.00205801 Jy ! Component: 1100 - total flux cleaned = -0.00217844 Jy ! Component: 1150 - total flux cleaned = -0.00221215 Jy ! Component: 1200 - total flux cleaned = -0.00224563 Jy ! Component: 1250 - total flux cleaned = -0.00232837 Jy ! Component: 1300 - total flux cleaned = -0.00231177 Jy ! Component: 1350 - total flux cleaned = -0.00234451 Jy ! Component: 1400 - total flux cleaned = -0.00242474 Jy ! Component: 1450 - total flux cleaned = -0.00237711 Jy ! Component: 1500 - total flux cleaned = -0.00240877 Jy ! Component: 1550 - total flux cleaned = -0.0024246 Jy ! Component: 1600 - total flux cleaned = -0.00244005 Jy ! Component: 1650 - total flux cleaned = -0.00248595 Jy ! Component: 1700 - total flux cleaned = -0.00254674 Jy ! Component: 1750 - total flux cleaned = -0.00259203 Jy ! Component: 1800 - total flux cleaned = -0.00266717 Jy ! Component: 1850 - total flux cleaned = -0.002712 Jy ! Component: 1900 - total flux cleaned = -0.0027715 Jy ! Component: 1950 - total flux cleaned = -0.00286027 Jy ! Component: 2000 - total flux cleaned = -0.00291909 Jy ! Component: 2050 - total flux cleaned = -0.00296301 Jy ! Component: 2100 - total flux cleaned = -0.00299229 Jy ! Component: 2150 - total flux cleaned = -0.00309407 Jy ! Component: 2200 - total flux cleaned = -0.00316638 Jy ! Component: 2250 - total flux cleaned = -0.00326728 Jy ! Component: 2300 - total flux cleaned = -0.00333919 Jy ! Component: 2350 - total flux cleaned = -0.00342517 Jy ! Component: 2400 - total flux cleaned = -0.00348232 Jy ! Component: 2450 - total flux cleaned = -0.00356785 Jy ! Component: 2500 - total flux cleaned = -0.00362473 Jy ! Component: 2550 - total flux cleaned = -0.00369564 Jy ! Component: 2600 - total flux cleaned = -0.00378048 Jy ! Component: 2650 - total flux cleaned = -0.00382276 Jy ! Component: 2700 - total flux cleaned = -0.00385083 Jy ! Component: 2750 - total flux cleaned = -0.00392108 Jy ! Component: 2800 - total flux cleaned = -0.00397715 Jy ! Component: 2850 - total flux cleaned = -0.00403317 Jy ! Component: 2900 - total flux cleaned = -0.00410301 Jy ! Component: 2950 - total flux cleaned = -0.0041309 Jy ! Component: 3000 - total flux cleaned = -0.00415878 Jy ! Component: 3050 - total flux cleaned = -0.00420043 Jy ! Component: 3100 - total flux cleaned = -0.00426998 Jy ! Component: 3150 - total flux cleaned = -0.00429788 Jy ! Component: 3200 - total flux cleaned = -0.00433976 Jy ! Component: 3250 - total flux cleaned = -0.00442357 Jy ! Component: 3300 - total flux cleaned = -0.00445167 Jy ! Component: 3350 - total flux cleaned = -0.00453587 Jy ! Component: 3400 - total flux cleaned = -0.00457805 Jy ! Component: 3450 - total flux cleaned = -0.00463437 Jy ! Component: 3500 - total flux cleaned = -0.0046909 Jy ! Component: 3550 - total flux cleaned = -0.00476182 Jy ! Component: 3600 - total flux cleaned = -0.00481866 Jy ! Component: 3650 - total flux cleaned = -0.00486135 Jy ! Component: 3700 - total flux cleaned = -0.00491858 Jy ! Component: 3750 - total flux cleaned = -0.00500462 Jy ! Component: 3800 - total flux cleaned = -0.00503341 Jy ! Component: 3850 - total flux cleaned = -0.00510552 Jy ! Component: 3900 - total flux cleaned = -0.00516339 Jy ! Component: 3950 - total flux cleaned = -0.0052068 Jy ! Component: 4000 - total flux cleaned = -0.00525039 Jy ! Component: 4050 - total flux cleaned = -0.00533795 Jy ! Total flux subtracted in 4096 components = -0.00539661 Jy ! Clean residual min=-0.000816 max=0.000886 Jy/beam ! Clean residual mean=-0.000015 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.058547 Jy keep ! Adding 214 model components to the UV plane model. ! The established model now contains 297 components and 0.058547 Jy ![Exited script file: muppet] wmap "J1751-1950_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.986 x 18.76 at -15.69 degrees (North through East) ! Clean map min=-0.002582 max=0.05021 Jy/beam ! Writing clean map to FITS file: J1751-1950_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0502096 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000248723 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.48611 1.48611 2.97222 5.94444 11.8889 23.7778 47.5555 95.111 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.05 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.986 x 18.76 at -15.69 degrees (North through East) ! Clean map min=-0.002582 max=0.05021 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1751-1950_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:03:25 2019