! Started logfile: J1746+6226_S_2017_07_16_pus_uvs.log on Thu May 9 11:13:57 2019 obs J1746+6226_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1746+6226_S_2017_07_16_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.717778 visibilities/baseline/integration-bin. ! Found source: J1746+6226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 1292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1746+6226_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.756305Jy sigma=0.007028 ! Fit after self-cal, rms=0.745605Jy sigma=0.006931 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=10.52 mas, bpa=-63.62 degrees ! Estimated noise=3113.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.195862 Jy ! Component: 100 - total flux cleaned = 0.240799 Jy ! Total flux subtracted in 100 components = 0.240799 Jy ! Clean residual min=-0.013935 max=0.023243 Jy/beam ! Clean residual mean=0.000035 rms=0.004370 Jy/beam ! Combined flux in latest and established models = 0.240799 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.240799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093255Jy sigma=0.000816 ! Fit after self-cal, rms=0.093250Jy sigma=0.000816 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=11.27 mas, bpa=-63.56 degrees ! Estimated noise=2435.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219758 Jy ! Component: 100 - total flux cleaned = 0.0302599 Jy ! Component: 150 - total flux cleaned = 0.034169 Jy ! Component: 200 - total flux cleaned = 0.0361914 Jy ! Total flux subtracted in 200 components = 0.0361914 Jy ! Clean residual min=-0.011189 max=0.014477 Jy/beam ! Clean residual mean=0.000055 rms=0.003510 Jy/beam ! Combined flux in latest and established models = 0.276991 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 29 components and 0.27699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087758Jy sigma=0.000767 ! Fit after self-cal, rms=0.087687Jy sigma=0.000766 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 0.97 KP 1.00 ! LA 1.02 MK 1.09 NL 0.89 OV 1.05 ! PT 1.04 SC 0.86 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 0.99 KP 0.97 ! LA 1.01 MK 0.97 NL 1.03 OV 1.03 ! PT 1.01 SC 1.51 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 0.98 KP 0.96 ! LA 1.00 MK 1.01 NL 0.97 OV 0.97 ! PT 0.99 SC 0.93 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.03 KP 1.00* ! LA 0.87 MK 0.97 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.087687Jy sigma=0.000766 ! Fit after self-cal, rms=0.079717Jy sigma=0.000707 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.027 mas, bmaj=11.15 mas, bpa=-63.81 degrees ! Estimated noise=2421.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.5, -21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141802 Jy ! Component: 100 - total flux cleaned = 0.0227674 Jy ! Component: 150 - total flux cleaned = 0.0284852 Jy ! Component: 200 - total flux cleaned = 0.0326383 Jy ! Total flux subtracted in 200 components = 0.0326383 Jy ! Clean residual min=-0.007055 max=0.005460 Jy/beam ! Clean residual mean=-0.000014 rms=0.001568 Jy/beam ! Combined flux in latest and established models = 0.309629 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 71 components and 0.309629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077055Jy sigma=0.000678 ! Fit after self-cal, rms=0.076994Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076994Jy sigma=0.000677 ! Fit after self-cal, rms=0.076427Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.029 mas, bmaj=11.14 mas, bpa=-63.79 degrees ! Estimated noise=2402.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413032 Jy ! Component: 100 - total flux cleaned = 0.00725023 Jy ! Component: 150 - total flux cleaned = 0.00964411 Jy ! Component: 200 - total flux cleaned = 0.0111638 Jy ! Total flux subtracted in 200 components = 0.0111638 Jy ! Clean residual min=-0.005797 max=0.005152 Jy/beam ! Clean residual mean=-0.000032 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 0.320793 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 87 components and 0.320793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076127Jy sigma=0.000672 ! Fit after self-cal, rms=0.076120Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171441 Jy ! Component: 100 - total flux cleaned = 0.00266035 Jy ! Component: 150 - total flux cleaned = 0.00314581 Jy ! Component: 200 - total flux cleaned = 0.00358909 Jy ! Total flux subtracted in 200 components = 0.00358909 Jy ! Clean residual min=-0.005596 max=0.004856 Jy/beam ! Clean residual mean=-0.000039 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.324382 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 105 components and 0.324382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076030Jy sigma=0.000671 ! Fit after self-cal, rms=0.076028Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076028Jy sigma=0.000671 ! Fit after self-cal, rms=0.076003Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=11.14 mas, bpa=-63.78 degrees ! Estimated noise=2399.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010785 Jy ! Component: 100 - total flux cleaned = 0.00187962 Jy ! Component: 150 - total flux cleaned = 0.00219926 Jy ! Component: 200 - total flux cleaned = 0.00241196 Jy ! Total flux subtracted in 200 components = 0.00241196 Jy ! Clean residual min=-0.005372 max=0.004673 Jy/beam ! Clean residual mean=-0.000034 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.326794 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 129 components and 0.326794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075949Jy sigma=0.000670 ! Fit after self-cal, rms=0.075949Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170469 Jy ! Component: 100 - total flux cleaned = 0.000326867 Jy ! Component: 150 - total flux cleaned = 0.000328007 Jy ! Component: 200 - total flux cleaned = 0.000436568 Jy ! Total flux subtracted in 200 components = 0.000436568 Jy ! Clean residual min=-0.005258 max=0.004536 Jy/beam ! Clean residual mean=-0.000036 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.32723 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 144 components and 0.32723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075913Jy sigma=0.000670 ! Fit after self-cal, rms=0.075913Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075913Jy sigma=0.000670 ! Fit after self-cal, rms=0.075929Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.955 mas, bmaj=12.21 mas, bpa=-73.36 degrees ! Estimated noise=3016.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664409 Jy ! Component: 100 - total flux cleaned = 0.000883302 Jy ! Component: 150 - total flux cleaned = 0.00099885 Jy ! Component: 200 - total flux cleaned = 0.000998087 Jy ! Total flux subtracted in 200 components = 0.000998087 Jy ! Clean residual min=-0.004702 max=0.005056 Jy/beam ! Clean residual mean=-0.000075 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.328228 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 184 components and 0.328228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075911Jy sigma=0.000670 ! Fit after self-cal, rms=0.075909Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.78105e-05 Jy ! Component: 100 - total flux cleaned = 2.84512e-05 Jy ! Component: 150 - total flux cleaned = -3.35253e-05 Jy ! Component: 200 - total flux cleaned = 2.27805e-05 Jy ! Total flux subtracted in 200 components = 2.27805e-05 Jy ! Clean residual min=-0.004596 max=0.005056 Jy/beam ! Clean residual mean=-0.000077 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.328251 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 193 components and 0.328251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075893Jy sigma=0.000669 ! Fit after self-cal, rms=0.075893Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=11.14 mas, bpa=-63.78 degrees ! Estimated noise=2397.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.024 x 11.14 at -63.78 degrees (North through East) ! Clean map min=-0.0047873 max=0.25169 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.523 mas, bmaj=10.41 mas, bpa=-63.71 degrees ! Estimated noise=3076.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.192545 Jy ! Component: 100 - total flux cleaned = 0.236358 Jy ! Component: 150 - total flux cleaned = 0.253781 Jy ! Component: 200 - total flux cleaned = 0.26508 Jy ! Total flux subtracted in 200 components = 0.26508 Jy ! Clean residual min=-0.009957 max=0.010777 Jy/beam ! Clean residual mean=0.000014 rms=0.002524 Jy/beam ! Combined flux in latest and established models = 0.26508 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.26508 Jy ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=11.14 mas, bpa=-63.78 degrees ! Estimated noise=2397.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128279 Jy ! Component: 100 - total flux cleaned = 0.0222296 Jy ! Component: 150 - total flux cleaned = 0.0296443 Jy ! Component: 200 - total flux cleaned = 0.0355766 Jy ! Total flux subtracted in 200 components = 0.0355766 Jy ! Clean residual min=-0.007092 max=0.005729 Jy/beam ! Clean residual mean=0.000013 rms=0.001727 Jy/beam ! Combined flux in latest and established models = 0.300657 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 57 components and 0.300657 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.955 mas, bmaj=12.21 mas, bpa=-73.36 degrees ! Estimated noise=3016.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00785384 Jy ! Component: 100 - total flux cleaned = 0.0130365 Jy ! Component: 150 - total flux cleaned = 0.0168878 Jy ! Component: 200 - total flux cleaned = 0.0198989 Jy ! Total flux subtracted in 200 components = 0.0198989 Jy ! Clean residual min=-0.006936 max=0.005254 Jy/beam ! Clean residual mean=-0.000042 rms=0.001694 Jy/beam ! Combined flux in latest and established models = 0.320556 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214161 Jy ! Component: 100 - total flux cleaned = 0.00330366 Jy ! Component: 150 - total flux cleaned = 0.00411079 Jy ! Component: 200 - total flux cleaned = 0.00457833 Jy ! Total flux subtracted in 200 components = 0.00457833 Jy ! Clean residual min=-0.006125 max=0.005342 Jy/beam ! Clean residual mean=-0.000059 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 0.325134 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 149 components and 0.325134 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=11.14 mas, bpa=-63.78 degrees ! Estimated noise=2397.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000885261 Jy ! Component: 100 - total flux cleaned = 0.00087991 Jy ! Component: 150 - total flux cleaned = 0.00105494 Jy ! Component: 200 - total flux cleaned = 0.00137825 Jy ! Total flux subtracted in 200 components = 0.00137825 Jy ! Clean residual min=-0.005529 max=0.004839 Jy/beam ! Clean residual mean=-0.000030 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.326512 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 179 components and 0.326512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075977Jy sigma=0.000671 ! Fit after self-cal, rms=0.075956Jy sigma=0.000671 wmodel J1746+6226_S_2017_07_16_pus_map.mod ! Writing 179 model components to file: J1746+6226_S_2017_07_16_pus_map.mod wobs J1746+6226_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1746+6226_S_2017_07_16_pus_uvs.fits wwins J1746+6226_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J1746+6226_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00196859 Jy ! Component: 100 - total flux cleaned = -0.00290705 Jy ! Component: 150 - total flux cleaned = -0.00298782 Jy ! Component: 200 - total flux cleaned = -0.00291615 Jy ! Component: 250 - total flux cleaned = -0.00270917 Jy ! Component: 300 - total flux cleaned = -0.00257645 Jy ! Component: 350 - total flux cleaned = -0.00232152 Jy ! Component: 400 - total flux cleaned = -0.00195385 Jy ! Component: 450 - total flux cleaned = -0.00159823 Jy ! Component: 500 - total flux cleaned = -0.00131128 Jy ! Component: 550 - total flux cleaned = -0.000975419 Jy ! Component: 600 - total flux cleaned = -0.00064859 Jy ! Component: 650 - total flux cleaned = -0.000118704 Jy ! Component: 700 - total flux cleaned = 0.000189669 Jy ! Component: 750 - total flux cleaned = 0.000590397 Jy ! Component: 800 - total flux cleaned = 0.0010286 Jy ! Component: 850 - total flux cleaned = 0.00126539 Jy ! Component: 900 - total flux cleaned = 0.00144969 Jy ! Component: 950 - total flux cleaned = 0.00180861 Jy ! Component: 1000 - total flux cleaned = 0.00189597 Jy ! Component: 1050 - total flux cleaned = 0.00193871 Jy ! Component: 1100 - total flux cleaned = 0.00202343 Jy ! Component: 1150 - total flux cleaned = 0.00202353 Jy ! Component: 1200 - total flux cleaned = 0.00202447 Jy ! Component: 1250 - total flux cleaned = 0.00206517 Jy ! Component: 1300 - total flux cleaned = 0.00210497 Jy ! Component: 1350 - total flux cleaned = 0.00210552 Jy ! Component: 1400 - total flux cleaned = 0.00195356 Jy ! Component: 1450 - total flux cleaned = 0.00184196 Jy ! Component: 1500 - total flux cleaned = 0.00173124 Jy ! Component: 1550 - total flux cleaned = 0.00158625 Jy ! Component: 1600 - total flux cleaned = 0.00140893 Jy ! Component: 1650 - total flux cleaned = 0.00119958 Jy ! Component: 1700 - total flux cleaned = 0.000924477 Jy ! Component: 1750 - total flux cleaned = 0.000789195 Jy ! Component: 1800 - total flux cleaned = 0.000488901 Jy ! Component: 1850 - total flux cleaned = 0.000292158 Jy ! Component: 1900 - total flux cleaned = 0.000129661 Jy ! Component: 1950 - total flux cleaned = -6.21571e-05 Jy ! Component: 2000 - total flux cleaned = -0.000188387 Jy ! Component: 2050 - total flux cleaned = -0.000376235 Jy ! Component: 2100 - total flux cleaned = -0.000591919 Jy ! Component: 2150 - total flux cleaned = -0.000744188 Jy ! Component: 2200 - total flux cleaned = -0.000924987 Jy ! Component: 2250 - total flux cleaned = -0.000984794 Jy ! Component: 2300 - total flux cleaned = -0.00119105 Jy ! Component: 2350 - total flux cleaned = -0.00127842 Jy ! Component: 2400 - total flux cleaned = -0.00139411 Jy ! Component: 2450 - total flux cleaned = -0.00142274 Jy ! Component: 2500 - total flux cleaned = -0.00150772 Jy ! Component: 2550 - total flux cleaned = -0.00156415 Jy ! Component: 2600 - total flux cleaned = -0.00164808 Jy ! Component: 2650 - total flux cleaned = -0.00170368 Jy ! Component: 2700 - total flux cleaned = -0.00175895 Jy ! Component: 2750 - total flux cleaned = -0.00186891 Jy ! Component: 2800 - total flux cleaned = -0.00203285 Jy ! Component: 2850 - total flux cleaned = -0.00208699 Jy ! Component: 2900 - total flux cleaned = -0.00224884 Jy ! Component: 2950 - total flux cleaned = -0.00230241 Jy ! Component: 3000 - total flux cleaned = -0.00235577 Jy ! Component: 3050 - total flux cleaned = -0.00243564 Jy ! Component: 3100 - total flux cleaned = -0.00254118 Jy ! Component: 3150 - total flux cleaned = -0.00259376 Jy ! Component: 3200 - total flux cleaned = -0.00269842 Jy ! Component: 3250 - total flux cleaned = -0.00277661 Jy ! Component: 3300 - total flux cleaned = -0.00280253 Jy ! Component: 3350 - total flux cleaned = -0.00295763 Jy ! Component: 3400 - total flux cleaned = -0.00300894 Jy ! Component: 3450 - total flux cleaned = -0.00313707 Jy ! Component: 3500 - total flux cleaned = -0.00321362 Jy ! Component: 3550 - total flux cleaned = -0.00331539 Jy ! Component: 3600 - total flux cleaned = -0.00341677 Jy ! Component: 3650 - total flux cleaned = -0.00351793 Jy ! Component: 3700 - total flux cleaned = -0.00356843 Jy ! Component: 3750 - total flux cleaned = -0.00356845 Jy ! Component: 3800 - total flux cleaned = -0.00361875 Jy ! Component: 3850 - total flux cleaned = -0.00371921 Jy ! Component: 3900 - total flux cleaned = -0.00379441 Jy ! Component: 3950 - total flux cleaned = -0.00386931 Jy ! Component: 4000 - total flux cleaned = -0.0038943 Jy ! Component: 4050 - total flux cleaned = -0.00394425 Jy ! Total flux subtracted in 4096 components = -0.00401895 Jy ! Clean residual min=-0.001423 max=0.001467 Jy/beam ! Clean residual mean=-0.000007 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.322493 Jy keep ! Adding 250 model components to the UV plane model. ! The established model now contains 429 components and 0.322493 Jy ![Exited script file: muppet] wmap "J1746+6226_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.024 x 11.14 at -63.78 degrees (North through East) ! Clean map min=-0.0058444 max=0.25219 Jy/beam ! Writing clean map to FITS file: J1746+6226_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.252187 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000426975 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.507926 0.507926 1.01585 2.0317 4.06341 8.12682 16.2536 32.5073 65.0145 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.252 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.024 x 11.14 at -63.78 degrees (North through East) ! Clean map min=-0.0058444 max=0.25219 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1746+6226_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:14:01 2019