! Started logfile: J1746+6226_S_2017_06_15_pus_uvs.log on Tue May 7 15:25:24 2019 obs J1746+6226_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1746+6226_S_2017_06_15_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.852778 visibilities/baseline/integration-bin. ! Found source: J1746+6226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 1228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1746+6226_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.734118Jy sigma=0.006824 ! Fit after self-cal, rms=0.723646Jy sigma=0.006734 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=10.39 mas, bpa=-53.92 degrees ! Estimated noise=3127.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.20991 Jy ! Component: 100 - total flux cleaned = 0.260947 Jy ! Total flux subtracted in 100 components = 0.260947 Jy ! Clean residual min=-0.012631 max=0.020746 Jy/beam ! Clean residual mean=0.000016 rms=0.003977 Jy/beam ! Combined flux in latest and established models = 0.260947 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.260947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093287Jy sigma=0.000828 ! Fit after self-cal, rms=0.093283Jy sigma=0.000828 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=10.72 mas, bpa=-54.32 degrees ! Estimated noise=2450.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0276737 Jy ! Component: 100 - total flux cleaned = 0.0398014 Jy ! Component: 150 - total flux cleaned = 0.0441674 Jy ! Component: 200 - total flux cleaned = 0.0450122 Jy ! Total flux subtracted in 200 components = 0.0450122 Jy ! Clean residual min=-0.010073 max=0.014816 Jy/beam ! Clean residual mean=-0.000039 rms=0.003400 Jy/beam ! Combined flux in latest and established models = 0.305959 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 33 components and 0.305959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085268Jy sigma=0.000756 ! Fit after self-cal, rms=0.085213Jy sigma=0.000755 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.91 HN 0.97 KP 1.00 ! LA 0.99 MK 1.00 NL 0.91 OV 1.13 ! PT 1.00 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.96 HN 1.02 KP 1.03 ! LA 1.00 MK 0.97 NL 1.02 OV 1.12 ! PT 1.00 SC 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.01 HN 1.02 KP 0.99 ! LA 0.98 MK 1.02 NL 1.00 OV 0.99 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00 KP 1.00* ! LA 1.17 MK 1.13 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.085213Jy sigma=0.000755 ! Fit after self-cal, rms=0.080265Jy sigma=0.000720 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=10.62 mas, bpa=-54.29 degrees ! Estimated noise=2428.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (120, 88.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140678 Jy ! Component: 100 - total flux cleaned = 0.0222306 Jy ! Component: 150 - total flux cleaned = 0.0277293 Jy ! Component: 200 - total flux cleaned = 0.0302604 Jy ! Total flux subtracted in 200 components = 0.0302604 Jy ! Clean residual min=-0.007622 max=0.008088 Jy/beam ! Clean residual mean=-0.000017 rms=0.001960 Jy/beam ! Combined flux in latest and established models = 0.33622 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 71 components and 0.33622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077573Jy sigma=0.000693 ! Fit after self-cal, rms=0.077511Jy sigma=0.000692 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077511Jy sigma=0.000692 ! Fit after self-cal, rms=0.077025Jy sigma=0.000690 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=10.6 mas, bpa=-54.33 degrees ! Estimated noise=2416.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310713 Jy ! Component: 100 - total flux cleaned = 0.00530888 Jy ! Component: 150 - total flux cleaned = 0.00636177 Jy ! Component: 200 - total flux cleaned = 0.00681123 Jy ! Total flux subtracted in 200 components = 0.00681123 Jy ! Clean residual min=-0.006784 max=0.007403 Jy/beam ! Clean residual mean=-0.000022 rms=0.001805 Jy/beam ! Combined flux in latest and established models = 0.343031 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 97 components and 0.343031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076643Jy sigma=0.000686 ! Fit after self-cal, rms=0.076631Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000761264 Jy ! Component: 100 - total flux cleaned = 0.00107838 Jy ! Component: 150 - total flux cleaned = 0.00145259 Jy ! Component: 200 - total flux cleaned = 0.00159406 Jy ! Total flux subtracted in 200 components = 0.00159406 Jy ! Clean residual min=-0.006703 max=0.007162 Jy/beam ! Clean residual mean=-0.000026 rms=0.001768 Jy/beam ! Combined flux in latest and established models = 0.344625 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 115 components and 0.344625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076481Jy sigma=0.000685 ! Fit after self-cal, rms=0.076476Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076476Jy sigma=0.000685 ! Fit after self-cal, rms=0.076447Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=10.6 mas, bpa=-54.38 degrees ! Estimated noise=2413.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141854 Jy ! Component: 100 - total flux cleaned = 0.00078199 Jy ! Component: 150 - total flux cleaned = 0.00104847 Jy ! Component: 200 - total flux cleaned = 0.00117373 Jy ! Total flux subtracted in 200 components = 0.00117373 Jy ! Clean residual min=-0.006623 max=0.006887 Jy/beam ! Clean residual mean=-0.000028 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 0.345799 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 129 components and 0.345799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076313Jy sigma=0.000684 ! Fit after self-cal, rms=0.076309Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000297731 Jy ! Component: 100 - total flux cleaned = 0.000359264 Jy ! Component: 150 - total flux cleaned = 0.000531263 Jy ! Component: 200 - total flux cleaned = 0.000642299 Jy ! Total flux subtracted in 200 components = 0.000642299 Jy ! Clean residual min=-0.006614 max=0.006760 Jy/beam ! Clean residual mean=-0.000029 rms=0.001711 Jy/beam ! Combined flux in latest and established models = 0.346441 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 139 components and 0.346441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076222Jy sigma=0.000683 ! Fit after self-cal, rms=0.076220Jy sigma=0.000683 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076220Jy sigma=0.000683 ! Fit after self-cal, rms=0.076280Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.551 mas, bmaj=12.07 mas, bpa=-64.17 degrees ! Estimated noise=2927.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269436 Jy ! Component: 100 - total flux cleaned = -0.000408268 Jy ! Component: 150 - total flux cleaned = -0.000351035 Jy ! Component: 200 - total flux cleaned = -0.000299071 Jy ! Total flux subtracted in 200 components = -0.000299071 Jy ! Clean residual min=-0.007591 max=0.008079 Jy/beam ! Clean residual mean=-0.000069 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 0.346142 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 160 components and 0.346142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076252Jy sigma=0.000683 ! Fit after self-cal, rms=0.076245Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.61322e-05 Jy ! Component: 100 - total flux cleaned = 0.000144708 Jy ! Component: 150 - total flux cleaned = 0.000232997 Jy ! Component: 200 - total flux cleaned = 0.000316547 Jy ! Total flux subtracted in 200 components = 0.000316547 Jy ! Clean residual min=-0.007599 max=0.008056 Jy/beam ! Clean residual mean=-0.000073 rms=0.002299 Jy/beam ! Combined flux in latest and established models = 0.346459 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 175 components and 0.346459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076219Jy sigma=0.000682 ! Fit after self-cal, rms=0.076212Jy sigma=0.000682 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=10.59 mas, bpa=-54.43 degrees ! Estimated noise=2413.35 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.214 x 10.59 at -54.43 degrees (North through East) ! Clean map min=-0.0061141 max=0.27628 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=10.3 mas, bpa=-54.05 degrees ! Estimated noise=3111.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.208788 Jy ! Component: 100 - total flux cleaned = 0.25773 Jy ! Component: 150 - total flux cleaned = 0.277925 Jy ! Component: 200 - total flux cleaned = 0.290426 Jy ! Total flux subtracted in 200 components = 0.290426 Jy ! Clean residual min=-0.009112 max=0.011660 Jy/beam ! Clean residual mean=0.000018 rms=0.002684 Jy/beam ! Combined flux in latest and established models = 0.290426 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.290426 Jy ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=10.59 mas, bpa=-54.43 degrees ! Estimated noise=2413.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156028 Jy ! Component: 100 - total flux cleaned = 0.0263135 Jy ! Component: 150 - total flux cleaned = 0.0344935 Jy ! Component: 200 - total flux cleaned = 0.0408907 Jy ! Total flux subtracted in 200 components = 0.0408907 Jy ! Clean residual min=-0.007498 max=0.007116 Jy/beam ! Clean residual mean=-0.000009 rms=0.001924 Jy/beam ! Combined flux in latest and established models = 0.331316 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 61 components and 0.331317 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.551 mas, bmaj=12.07 mas, bpa=-64.17 degrees ! Estimated noise=2927.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0074055 Jy ! Component: 100 - total flux cleaned = 0.0108729 Jy ! Component: 150 - total flux cleaned = 0.0123026 Jy ! Component: 200 - total flux cleaned = 0.0128353 Jy ! Total flux subtracted in 200 components = 0.0128353 Jy ! Clean residual min=-0.006627 max=0.007938 Jy/beam ! Clean residual mean=-0.000050 rms=0.002159 Jy/beam ! Combined flux in latest and established models = 0.344152 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000348294 Jy ! Component: 100 - total flux cleaned = 0.000549209 Jy ! Component: 150 - total flux cleaned = 0.000643462 Jy ! Component: 200 - total flux cleaned = 0.000807251 Jy ! Total flux subtracted in 200 components = 0.000807251 Jy ! Clean residual min=-0.006060 max=0.007467 Jy/beam ! Clean residual mean=-0.000053 rms=0.002022 Jy/beam ! Combined flux in latest and established models = 0.344959 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 147 components and 0.344959 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=10.59 mas, bpa=-54.43 degrees ! Estimated noise=2413.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00128389 Jy ! Component: 100 - total flux cleaned = -0.000846168 Jy ! Component: 150 - total flux cleaned = -0.000643881 Jy ! Component: 200 - total flux cleaned = -0.000361464 Jy ! Total flux subtracted in 200 components = -0.000361464 Jy ! Clean residual min=-0.005818 max=0.006736 Jy/beam ! Clean residual mean=-0.000026 rms=0.001546 Jy/beam ! Combined flux in latest and established models = 0.344598 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 173 components and 0.344598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076036Jy sigma=0.000680 ! Fit after self-cal, rms=0.075975Jy sigma=0.000680 wmodel J1746+6226_S_2017_06_15_pus_map.mod ! Writing 173 model components to file: J1746+6226_S_2017_06_15_pus_map.mod wobs J1746+6226_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1746+6226_S_2017_06_15_pus_uvs.fits wwins J1746+6226_S_2017_06_15_pus_map.win ! wwins: Wrote 3 windows to J1746+6226_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000895681 Jy ! Component: 100 - total flux cleaned = 0.000190293 Jy ! Component: 150 - total flux cleaned = -9.21249e-05 Jy ! Component: 200 - total flux cleaned = -0.000517442 Jy ! Component: 250 - total flux cleaned = -0.0010815 Jy ! Component: 300 - total flux cleaned = -0.00177198 Jy ! Component: 350 - total flux cleaned = -0.00265109 Jy ! Component: 400 - total flux cleaned = -0.00341979 Jy ! Component: 450 - total flux cleaned = -0.00422447 Jy ! Component: 500 - total flux cleaned = -0.00493504 Jy ! Component: 550 - total flux cleaned = -0.00568303 Jy ! Component: 600 - total flux cleaned = -0.00634396 Jy ! Component: 650 - total flux cleaned = -0.00692428 Jy ! Component: 700 - total flux cleaned = -0.00726232 Jy ! Component: 750 - total flux cleaned = -0.00753553 Jy ! Component: 800 - total flux cleaned = -0.00758938 Jy ! Component: 850 - total flux cleaned = -0.00764218 Jy ! Component: 900 - total flux cleaned = -0.00764297 Jy ! Component: 950 - total flux cleaned = -0.00759288 Jy ! Component: 1000 - total flux cleaned = -0.00734811 Jy ! Component: 1050 - total flux cleaned = -0.00710944 Jy ! Component: 1100 - total flux cleaned = -0.00706178 Jy ! Component: 1150 - total flux cleaned = -0.00687663 Jy ! Component: 1200 - total flux cleaned = -0.00669503 Jy ! Component: 1250 - total flux cleaned = -0.00660491 Jy ! Component: 1300 - total flux cleaned = -0.00642984 Jy ! Component: 1350 - total flux cleaned = -0.00630123 Jy ! Component: 1400 - total flux cleaned = -0.00638609 Jy ! Component: 1450 - total flux cleaned = -0.00638599 Jy ! Component: 1500 - total flux cleaned = -0.00634584 Jy ! Component: 1550 - total flux cleaned = -0.00654828 Jy ! Component: 1600 - total flux cleaned = -0.00650775 Jy ! Component: 1650 - total flux cleaned = -0.00670377 Jy ! Component: 1700 - total flux cleaned = -0.00666481 Jy ! Component: 1750 - total flux cleaned = -0.00685583 Jy ! Component: 1800 - total flux cleaned = -0.0068934 Jy ! Component: 1850 - total flux cleaned = -0.00685632 Jy ! Component: 1900 - total flux cleaned = -0.00693034 Jy ! Component: 1950 - total flux cleaned = -0.00693062 Jy ! Component: 2000 - total flux cleaned = -0.00693014 Jy ! Component: 2050 - total flux cleaned = -0.00689447 Jy ! Component: 2100 - total flux cleaned = -0.00689421 Jy ! Component: 2150 - total flux cleaned = -0.00692868 Jy ! Component: 2200 - total flux cleaned = -0.00692884 Jy ! Component: 2250 - total flux cleaned = -0.00699683 Jy ! Component: 2300 - total flux cleaned = -0.00692973 Jy ! Component: 2350 - total flux cleaned = -0.00696325 Jy ! Component: 2400 - total flux cleaned = -0.00702917 Jy ! Component: 2450 - total flux cleaned = -0.00696414 Jy ! Component: 2500 - total flux cleaned = -0.00702876 Jy ! Component: 2550 - total flux cleaned = -0.0070923 Jy ! Component: 2600 - total flux cleaned = -0.00696681 Jy ! Component: 2650 - total flux cleaned = -0.00712323 Jy ! Component: 2700 - total flux cleaned = -0.00718492 Jy ! Component: 2750 - total flux cleaned = -0.00727701 Jy ! Component: 2800 - total flux cleaned = -0.00736832 Jy ! Component: 2850 - total flux cleaned = -0.00751913 Jy ! Component: 2900 - total flux cleaned = -0.00766828 Jy ! Component: 2950 - total flux cleaned = -0.00763918 Jy ! Component: 3000 - total flux cleaned = -0.0078448 Jy ! Component: 3050 - total flux cleaned = -0.00796088 Jy ! Component: 3100 - total flux cleaned = -0.00801858 Jy ! Component: 3150 - total flux cleaned = -0.00813334 Jy ! Component: 3200 - total flux cleaned = -0.00827571 Jy ! Component: 3250 - total flux cleaned = -0.00838868 Jy ! Component: 3300 - total flux cleaned = -0.00864064 Jy ! Component: 3350 - total flux cleaned = -0.00866822 Jy ! Component: 3400 - total flux cleaned = -0.00869606 Jy ! Component: 3450 - total flux cleaned = -0.00880562 Jy ! Component: 3500 - total flux cleaned = -0.00885991 Jy ! Component: 3550 - total flux cleaned = -0.00894098 Jy ! Component: 3600 - total flux cleaned = -0.00902159 Jy ! Component: 3650 - total flux cleaned = -0.00910138 Jy ! Component: 3700 - total flux cleaned = -0.00915419 Jy ! Component: 3750 - total flux cleaned = -0.00920689 Jy ! Component: 3800 - total flux cleaned = -0.00918082 Jy ! Component: 3850 - total flux cleaned = -0.00928463 Jy ! Component: 3900 - total flux cleaned = -0.00925902 Jy ! Component: 3950 - total flux cleaned = -0.0093618 Jy ! Component: 4000 - total flux cleaned = -0.00943789 Jy ! Component: 4050 - total flux cleaned = -0.00943792 Jy ! Total flux subtracted in 4096 components = -0.00946314 Jy ! Clean residual min=-0.001523 max=0.001687 Jy/beam ! Clean residual mean=-0.000007 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.335135 Jy keep ! Adding 250 model components to the UV plane model. ! The established model now contains 423 components and 0.335135 Jy ![Exited script file: muppet] wmap "J1746+6226_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.214 x 10.59 at -54.43 degrees (North through East) ! Clean map min=-0.0032173 max=0.27425 Jy/beam ! Writing clean map to FITS file: J1746+6226_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.274255 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000430995 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.471454 0.471454 0.942908 1.88582 3.77163 7.54326 15.0865 30.173 60.3461 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.274 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.214 x 10.59 at -54.43 degrees (North through East) ! Clean map min=-0.0032173 max=0.27425 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1746+6226_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:25:28 2019