! Started logfile: J1746+6226_S_2017_02_24_pus_uvs.log on Sat May 4 11:32:15 2019 obs J1746+6226_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1746+6226_S_2017_02_24_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J1746+6226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 1248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1746+6226_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.731462Jy sigma=0.007041 ! Fit after self-cal, rms=0.729287Jy sigma=0.007021 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.664 mas, bmaj=9.124 mas, bpa=-23.86 degrees ! Estimated noise=2914.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.209468 Jy ! Component: 100 - total flux cleaned = 0.25715 Jy ! Total flux subtracted in 100 components = 0.25715 Jy ! Clean residual min=-0.013217 max=0.021069 Jy/beam ! Clean residual mean=-0.000004 rms=0.003934 Jy/beam ! Combined flux in latest and established models = 0.25715 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.25715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085242Jy sigma=0.000789 ! Fit after self-cal, rms=0.085246Jy sigma=0.000789 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=9.872 mas, bpa=-22.56 degrees ! Estimated noise=2256.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220185 Jy ! Component: 100 - total flux cleaned = 0.0322469 Jy ! Component: 150 - total flux cleaned = 0.0371258 Jy ! Component: 200 - total flux cleaned = 0.038818 Jy ! Total flux subtracted in 200 components = 0.038818 Jy ! Clean residual min=-0.012164 max=0.017804 Jy/beam ! Clean residual mean=-0.000005 rms=0.003373 Jy/beam ! Combined flux in latest and established models = 0.295968 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 23 components and 0.295968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079816Jy sigma=0.000736 ! Fit after self-cal, rms=0.079785Jy sigma=0.000736 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.10 HN 1.08 KP 1.02 ! LA 0.90 MK 1.00 NL 0.99 OV 1.03 ! PT 1.02 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00 KP 0.96 ! LA 0.93 MK 0.97 NL 0.95 OV 1.09 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.95 HN 0.94 KP 1.05 ! LA 1.01 MK 1.02 NL 1.09 OV 0.99 ! PT 0.99 SC 0.94 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 0.92 KP 1.00* ! LA 0.95 MK 1.56 NL 1.00* OV 1.13 ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.079785Jy sigma=0.000736 ! Fit after self-cal, rms=0.076094Jy sigma=0.000696 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=9.861 mas, bpa=-22.48 degrees ! Estimated noise=2248.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, -19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153556 Jy ! Component: 100 - total flux cleaned = 0.0240959 Jy ! Component: 150 - total flux cleaned = 0.0299943 Jy ! Component: 200 - total flux cleaned = 0.0341041 Jy ! Total flux subtracted in 200 components = 0.0341041 Jy ! Clean residual min=-0.008651 max=0.007116 Jy/beam ! Clean residual mean=0.000003 rms=0.001939 Jy/beam ! Combined flux in latest and established models = 0.330072 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 73 components and 0.330072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072823Jy sigma=0.000661 ! Fit after self-cal, rms=0.072790Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072790Jy sigma=0.000659 ! Fit after self-cal, rms=0.072211Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=9.873 mas, bpa=-22.51 degrees ! Estimated noise=2234.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00436614 Jy ! Component: 100 - total flux cleaned = 0.00598353 Jy ! Component: 150 - total flux cleaned = 0.00618358 Jy ! Component: 200 - total flux cleaned = 0.00644019 Jy ! Total flux subtracted in 200 components = 0.00644019 Jy ! Clean residual min=-0.007870 max=0.006100 Jy/beam ! Clean residual mean=0.000005 rms=0.001709 Jy/beam ! Combined flux in latest and established models = 0.336512 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 101 components and 0.336512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071802Jy sigma=0.000653 ! Fit after self-cal, rms=0.071805Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000527407 Jy ! Component: 100 - total flux cleaned = 0.000604989 Jy ! Component: 150 - total flux cleaned = 0.000670709 Jy ! Component: 200 - total flux cleaned = 0.000730815 Jy ! Total flux subtracted in 200 components = 0.000730815 Jy ! Clean residual min=-0.007677 max=0.006041 Jy/beam ! Clean residual mean=0.000005 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 0.337243 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 114 components and 0.337243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071663Jy sigma=0.000652 ! Fit after self-cal, rms=0.071664Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071664Jy sigma=0.000652 ! Fit after self-cal, rms=0.071643Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=9.885 mas, bpa=-22.52 degrees ! Estimated noise=2233.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000884323 Jy ! Component: 100 - total flux cleaned = 0.00100163 Jy ! Component: 150 - total flux cleaned = 0.00105224 Jy ! Component: 200 - total flux cleaned = 0.00100498 Jy ! Total flux subtracted in 200 components = 0.00100498 Jy ! Clean residual min=-0.007618 max=0.005908 Jy/beam ! Clean residual mean=0.000006 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 0.338248 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 130 components and 0.338248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071537Jy sigma=0.000651 ! Fit after self-cal, rms=0.071540Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369028 Jy ! Component: 100 - total flux cleaned = 0.000409911 Jy ! Component: 150 - total flux cleaned = 0.000409255 Jy ! Component: 200 - total flux cleaned = 0.000369732 Jy ! Total flux subtracted in 200 components = 0.000369732 Jy ! Clean residual min=-0.007569 max=0.005900 Jy/beam ! Clean residual mean=0.000006 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 0.338618 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 141 components and 0.338618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071480Jy sigma=0.000650 ! Fit after self-cal, rms=0.071482Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071482Jy sigma=0.000650 ! Fit after self-cal, rms=0.071542Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.437 mas, bmaj=10.67 mas, bpa=-22.89 degrees ! Estimated noise=2763.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000402305 Jy ! Component: 100 - total flux cleaned = -0.000628638 Jy ! Component: 150 - total flux cleaned = -0.000830334 Jy ! Component: 200 - total flux cleaned = -0.00101557 Jy ! Total flux subtracted in 200 components = -0.00101557 Jy ! Clean residual min=-0.009104 max=0.009488 Jy/beam ! Clean residual mean=0.000013 rms=0.002569 Jy/beam ! Combined flux in latest and established models = 0.337602 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 156 components and 0.337602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071511Jy sigma=0.000650 ! Fit after self-cal, rms=0.071511Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.39996e-05 Jy ! Component: 100 - total flux cleaned = -0.000209489 Jy ! Component: 150 - total flux cleaned = -0.000287264 Jy ! Component: 200 - total flux cleaned = -0.000360094 Jy ! Total flux subtracted in 200 components = -0.000360094 Jy ! Clean residual min=-0.009060 max=0.009376 Jy/beam ! Clean residual mean=0.000014 rms=0.002553 Jy/beam ! Combined flux in latest and established models = 0.337242 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 170 components and 0.337242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071498Jy sigma=0.000650 ! Fit after self-cal, rms=0.071498Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=9.89 mas, bpa=-22.53 degrees ! Estimated noise=2234.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.156 x 9.89 at -22.53 degrees (North through East) ! Clean map min=-0.0072218 max=0.27045 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.687 mas, bmaj=9.087 mas, bpa=-23.83 degrees ! Estimated noise=2901.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.20826 Jy ! Component: 100 - total flux cleaned = 0.255413 Jy ! Component: 150 - total flux cleaned = 0.274644 Jy ! Component: 200 - total flux cleaned = 0.287672 Jy ! Total flux subtracted in 200 components = 0.287672 Jy ! Clean residual min=-0.010747 max=0.008859 Jy/beam ! Clean residual mean=0.000003 rms=0.002450 Jy/beam ! Combined flux in latest and established models = 0.287672 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.287672 Jy ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=9.89 mas, bpa=-22.53 degrees ! Estimated noise=2234.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127534 Jy ! Component: 100 - total flux cleaned = 0.0216721 Jy ! Component: 150 - total flux cleaned = 0.0284739 Jy ! Component: 200 - total flux cleaned = 0.0339282 Jy ! Total flux subtracted in 200 components = 0.0339282 Jy ! Clean residual min=-0.009354 max=0.005703 Jy/beam ! Clean residual mean=0.000005 rms=0.001875 Jy/beam ! Combined flux in latest and established models = 0.3216 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 63 components and 0.3216 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.437 mas, bmaj=10.67 mas, bpa=-22.89 degrees ! Estimated noise=2763.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00715846 Jy ! Component: 100 - total flux cleaned = 0.0116068 Jy ! Component: 150 - total flux cleaned = 0.0141069 Jy ! Component: 200 - total flux cleaned = 0.0148291 Jy ! Total flux subtracted in 200 components = 0.0148291 Jy ! Clean residual min=-0.009021 max=0.009054 Jy/beam ! Clean residual mean=0.000013 rms=0.002649 Jy/beam ! Combined flux in latest and established models = 0.336429 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023126 Jy ! Component: 100 - total flux cleaned = 0.000506043 Jy ! Component: 150 - total flux cleaned = 0.000631162 Jy ! Component: 200 - total flux cleaned = 0.000629043 Jy ! Total flux subtracted in 200 components = 0.000629043 Jy ! Clean residual min=-0.008909 max=0.009048 Jy/beam ! Clean residual mean=0.000013 rms=0.002599 Jy/beam ! Combined flux in latest and established models = 0.337058 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 123 components and 0.337058 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=9.89 mas, bpa=-22.53 degrees ! Estimated noise=2234.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208382 Jy ! Component: 100 - total flux cleaned = -1.96237e-05 Jy ! Component: 150 - total flux cleaned = 0.000244778 Jy ! Component: 200 - total flux cleaned = 0.000473987 Jy ! Total flux subtracted in 200 components = 0.000473987 Jy ! Clean residual min=-0.007821 max=0.005694 Jy/beam ! Clean residual mean=0.000007 rms=0.001617 Jy/beam ! Combined flux in latest and established models = 0.337532 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 135 components and 0.337532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071678Jy sigma=0.000652 ! Fit after self-cal, rms=0.071683Jy sigma=0.000651 wmodel J1746+6226_S_2017_02_24_pus_map.mod ! Writing 135 model components to file: J1746+6226_S_2017_02_24_pus_map.mod wobs J1746+6226_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1746+6226_S_2017_02_24_pus_uvs.fits wwins J1746+6226_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J1746+6226_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00338705 Jy ! Component: 100 - total flux cleaned = -0.00516153 Jy ! Component: 150 - total flux cleaned = -0.00535392 Jy ! Component: 200 - total flux cleaned = -0.00553349 Jy ! Component: 250 - total flux cleaned = -0.00553463 Jy ! Component: 300 - total flux cleaned = -0.00584954 Jy ! Component: 350 - total flux cleaned = -0.00607091 Jy ! Component: 400 - total flux cleaned = -0.0062843 Jy ! Component: 450 - total flux cleaned = -0.00662559 Jy ! Component: 500 - total flux cleaned = -0.00695245 Jy ! Component: 550 - total flux cleaned = -0.0073288 Jy ! Component: 600 - total flux cleaned = -0.0076903 Jy ! Component: 650 - total flux cleaned = -0.00786449 Jy ! Component: 700 - total flux cleaned = -0.00826059 Jy ! Component: 750 - total flux cleaned = -0.00853582 Jy ! Component: 800 - total flux cleaned = -0.00880339 Jy ! Component: 850 - total flux cleaned = -0.00916558 Jy ! Component: 900 - total flux cleaned = -0.00936728 Jy ! Component: 950 - total flux cleaned = -0.00956451 Jy ! Component: 1000 - total flux cleaned = -0.00966096 Jy ! Component: 1050 - total flux cleaned = -0.00980244 Jy ! Component: 1100 - total flux cleaned = -0.00993908 Jy ! Component: 1150 - total flux cleaned = -0.00993854 Jy ! Component: 1200 - total flux cleaned = -0.00998219 Jy ! Component: 1250 - total flux cleaned = -0.010068 Jy ! Component: 1300 - total flux cleaned = -0.0101099 Jy ! Component: 1350 - total flux cleaned = -0.0101503 Jy ! Component: 1400 - total flux cleaned = -0.0101903 Jy ! Component: 1450 - total flux cleaned = -0.0101905 Jy ! Component: 1500 - total flux cleaned = -0.0102296 Jy ! Component: 1550 - total flux cleaned = -0.0102669 Jy ! Component: 1600 - total flux cleaned = -0.010304 Jy ! Component: 1650 - total flux cleaned = -0.0103403 Jy ! Component: 1700 - total flux cleaned = -0.0103042 Jy ! Component: 1750 - total flux cleaned = -0.0102688 Jy ! Component: 1800 - total flux cleaned = -0.0101996 Jy ! Component: 1850 - total flux cleaned = -0.0102349 Jy ! Component: 1900 - total flux cleaned = -0.0103024 Jy ! Component: 1950 - total flux cleaned = -0.0103691 Jy ! Component: 2000 - total flux cleaned = -0.0104017 Jy ! Component: 2050 - total flux cleaned = -0.0104339 Jy ! Component: 2100 - total flux cleaned = -0.0105939 Jy ! Component: 2150 - total flux cleaned = -0.0106571 Jy ! Component: 2200 - total flux cleaned = -0.0106578 Jy ! Component: 2250 - total flux cleaned = -0.0107198 Jy ! Component: 2300 - total flux cleaned = -0.0107506 Jy ! Component: 2350 - total flux cleaned = -0.0107811 Jy ! Component: 2400 - total flux cleaned = -0.0109298 Jy ! Component: 2450 - total flux cleaned = -0.0109881 Jy ! Component: 2500 - total flux cleaned = -0.0109588 Jy ! Component: 2550 - total flux cleaned = -0.0111024 Jy ! Component: 2600 - total flux cleaned = -0.0111874 Jy ! Component: 2650 - total flux cleaned = -0.0112712 Jy ! Component: 2700 - total flux cleaned = -0.011299 Jy ! Component: 2750 - total flux cleaned = -0.0114092 Jy ! Component: 2800 - total flux cleaned = -0.0114091 Jy ! Component: 2850 - total flux cleaned = -0.0115449 Jy ! Component: 2900 - total flux cleaned = -0.0115715 Jy ! Component: 2950 - total flux cleaned = -0.0116516 Jy ! Component: 3000 - total flux cleaned = -0.0117572 Jy ! Component: 3050 - total flux cleaned = -0.011862 Jy ! Component: 3100 - total flux cleaned = -0.0120953 Jy ! Component: 3150 - total flux cleaned = -0.0121981 Jy ! Component: 3200 - total flux cleaned = -0.0124018 Jy ! Component: 3250 - total flux cleaned = -0.0124275 Jy ! Component: 3300 - total flux cleaned = -0.0126534 Jy ! Component: 3350 - total flux cleaned = -0.0127031 Jy ! Component: 3400 - total flux cleaned = -0.0129005 Jy ! Component: 3450 - total flux cleaned = -0.012925 Jy ! Component: 3500 - total flux cleaned = -0.0129982 Jy ! Component: 3550 - total flux cleaned = -0.0132152 Jy ! Component: 3600 - total flux cleaned = -0.0132868 Jy ! Component: 3650 - total flux cleaned = -0.0134529 Jy ! Component: 3700 - total flux cleaned = -0.0134998 Jy ! Component: 3750 - total flux cleaned = -0.0135701 Jy ! Component: 3800 - total flux cleaned = -0.0137327 Jy ! Component: 3850 - total flux cleaned = -0.0138017 Jy ! Component: 3900 - total flux cleaned = -0.0139164 Jy ! Component: 3950 - total flux cleaned = -0.0139846 Jy ! Component: 4000 - total flux cleaned = -0.0140754 Jy ! Component: 4050 - total flux cleaned = -0.01421 Jy ! Total flux subtracted in 4096 components = -0.0142993 Jy ! Clean residual min=-0.001316 max=0.001521 Jy/beam ! Clean residual mean=-0.000000 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.323233 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 407 components and 0.323233 Jy ![Exited script file: muppet] wmap "J1746+6226_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.156 x 9.89 at -22.53 degrees (North through East) ! Clean map min=-0.0038707 max=0.26941 Jy/beam ! Writing clean map to FITS file: J1746+6226_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.269412 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000394108 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.438854 0.438854 0.877709 1.75542 3.51083 7.02167 14.0433 28.0867 56.1733 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.269 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.156 x 9.89 at -22.53 degrees (North through East) ! Clean map min=-0.0038707 max=0.26941 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1746+6226_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:32:21 2019