! Started logfile: J1746+6226_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:19:36 2019 obs J1746+6226_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1746+6226_S_2017_01_16_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.69037 visibilities/baseline/integration-bin. ! Found source: J1746+6226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 1864 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1746+6226_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.822592Jy sigma=0.006335 ! Fit after self-cal, rms=0.786393Jy sigma=0.006308 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.125 mas, bmaj=6.165 mas, bpa=-13.5 degrees ! Estimated noise=2604.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202097 Jy ! Component: 100 - total flux cleaned = 0.246246 Jy ! Total flux subtracted in 100 components = 0.246246 Jy ! Clean residual min=-0.011773 max=0.018928 Jy/beam ! Clean residual mean=0.000020 rms=0.003258 Jy/beam ! Combined flux in latest and established models = 0.246246 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.246246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321159Jy sigma=0.000761 ! Fit after self-cal, rms=0.321144Jy sigma=0.000761 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.837 mas, bmaj=6.975 mas, bpa=-19.01 degrees ! Estimated noise=2116.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222092 Jy ! Component: 100 - total flux cleaned = 0.0361736 Jy ! Component: 150 - total flux cleaned = 0.0461054 Jy ! Component: 200 - total flux cleaned = 0.0526047 Jy ! Total flux subtracted in 200 components = 0.0526047 Jy ! Clean residual min=-0.009600 max=0.009622 Jy/beam ! Clean residual mean=-0.000005 rms=0.002316 Jy/beam ! Combined flux in latest and established models = 0.298851 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 54 components and 0.298851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.319377Jy sigma=0.000702 ! Fit after self-cal, rms=0.319206Jy sigma=0.000699 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 0.97 KP 0.98 ! LA 0.97 MK 1.00* NL 0.88 OV 0.99 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.04 KP 0.93 ! LA 0.91 MK 1.00* NL 1.01 OV 0.98 ! PT 1.00 SC 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.02 HN 0.97 KP 0.94 ! LA 0.98 MK 1.00* NL 0.98 OV 0.94 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.06 HN 0.99 KP 1.00* ! LA 1.08 MK 1.00* NL 1.00* OV 0.98 ! PT 1.01 SC 1.36 ! ! ! Fit before self-cal, rms=0.319206Jy sigma=0.000699 ! Fit after self-cal, rms=0.450386Jy sigma=0.000674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.866 mas, bmaj=7.04 mas, bpa=-20.3 degrees ! Estimated noise=2085.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00617538 Jy ! Component: 100 - total flux cleaned = 0.00720393 Jy ! Component: 150 - total flux cleaned = 0.00776803 Jy ! Component: 200 - total flux cleaned = 0.00824698 Jy ! Total flux subtracted in 200 components = 0.00824698 Jy ! Clean residual min=-0.007013 max=0.008015 Jy/beam ! Clean residual mean=-0.000029 rms=0.001746 Jy/beam ! Combined flux in latest and established models = 0.307098 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 85 components and 0.307098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.450263Jy sigma=0.000668 ! Fit after self-cal, rms=0.450255Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.450255Jy sigma=0.000667 ! Fit after self-cal, rms=0.124098Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.825 mas, bmaj=7.028 mas, bpa=-19.52 degrees ! Estimated noise=2086.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204795 Jy ! Component: 100 - total flux cleaned = 0.00234426 Jy ! Component: 150 - total flux cleaned = 0.00240946 Jy ! Component: 200 - total flux cleaned = 0.00246638 Jy ! Total flux subtracted in 200 components = 0.00246638 Jy ! Clean residual min=-0.004927 max=0.004763 Jy/beam ! Clean residual mean=-0.000025 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.309564 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.309564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124007Jy sigma=0.000646 ! Fit after self-cal, rms=0.124005Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.57189e-05 Jy ! Component: 100 - total flux cleaned = -9.40033e-05 Jy ! Component: 150 - total flux cleaned = -0.000136294 Jy ! Component: 200 - total flux cleaned = -0.000134677 Jy ! Total flux subtracted in 200 components = -0.000134677 Jy ! Clean residual min=-0.004768 max=0.004571 Jy/beam ! Clean residual mean=-0.000025 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.309429 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 109 components and 0.309429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123967Jy sigma=0.000645 ! Fit after self-cal, rms=0.123965Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123965Jy sigma=0.000645 ! Fit after self-cal, rms=0.123194Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.813 mas, bmaj=7.019 mas, bpa=-19.6 degrees ! Estimated noise=2085.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001188 Jy ! Component: 100 - total flux cleaned = 0.00133446 Jy ! Component: 150 - total flux cleaned = 0.00129297 Jy ! Component: 200 - total flux cleaned = 0.00125521 Jy ! Total flux subtracted in 200 components = 0.00125521 Jy ! Clean residual min=-0.004695 max=0.004350 Jy/beam ! Clean residual mean=-0.000025 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 0.310685 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 122 components and 0.310685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123155Jy sigma=0.000645 ! Fit after self-cal, rms=0.123127Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.94775e-05 Jy ! Component: 100 - total flux cleaned = -0.000112281 Jy ! Component: 150 - total flux cleaned = -0.000112678 Jy ! Component: 200 - total flux cleaned = -0.000113744 Jy ! Total flux subtracted in 200 components = -0.000113744 Jy ! Clean residual min=-0.004618 max=0.004281 Jy/beam ! Clean residual mean=-0.000025 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.310571 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 135 components and 0.310571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123106Jy sigma=0.000644 ! Fit after self-cal, rms=0.123102Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123102Jy sigma=0.000644 ! Fit after self-cal, rms=0.122760Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.253 mas, bmaj=9.845 mas, bpa=-34.51 degrees ! Estimated noise=2387.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158471 Jy ! Component: 100 - total flux cleaned = -6.41682e-05 Jy ! Component: 150 - total flux cleaned = -2.54317e-05 Jy ! Component: 200 - total flux cleaned = -9.19521e-05 Jy ! Total flux subtracted in 200 components = -9.19521e-05 Jy ! Clean residual min=-0.004801 max=0.004506 Jy/beam ! Clean residual mean=-0.000040 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.310479 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 149 components and 0.310479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122753Jy sigma=0.000644 ! Fit after self-cal, rms=0.122748Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130754 Jy ! Component: 100 - total flux cleaned = -0.000159568 Jy ! Component: 150 - total flux cleaned = -0.00021096 Jy ! Component: 200 - total flux cleaned = -0.000234139 Jy ! Total flux subtracted in 200 components = -0.000234139 Jy ! Clean residual min=-0.004653 max=0.004533 Jy/beam ! Clean residual mean=-0.000039 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 0.310245 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 157 components and 0.310245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122739Jy sigma=0.000644 ! Fit after self-cal, rms=0.122741Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.804 mas, bmaj=7.013 mas, bpa=-19.63 degrees ! Estimated noise=2085.11 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.804 x 7.013 at -19.63 degrees (North through East) ! Clean map min=-0.0045589 max=0.2563 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.11 mas, bmaj=6.198 mas, bpa=-14.71 degrees ! Estimated noise=2541.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197173 Jy ! Component: 100 - total flux cleaned = 0.240895 Jy ! Component: 150 - total flux cleaned = 0.258817 Jy ! Component: 200 - total flux cleaned = 0.271352 Jy ! Total flux subtracted in 200 components = 0.271352 Jy ! Clean residual min=-0.006564 max=0.007600 Jy/beam ! Clean residual mean=0.000008 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 0.271352 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.271352 Jy ! Inverting map and beam ! Estimated beam: bmin=4.804 mas, bmaj=7.013 mas, bpa=-19.63 degrees ! Estimated noise=2085.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129945 Jy ! Component: 100 - total flux cleaned = 0.0220086 Jy ! Component: 150 - total flux cleaned = 0.0284116 Jy ! Component: 200 - total flux cleaned = 0.0330695 Jy ! Total flux subtracted in 200 components = 0.0330695 Jy ! Clean residual min=-0.005771 max=0.004717 Jy/beam ! Clean residual mean=-0.000017 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.304421 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 85 components and 0.304421 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.253 mas, bmaj=9.845 mas, bpa=-34.51 degrees ! Estimated noise=2387.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00416097 Jy ! Component: 100 - total flux cleaned = 0.00472193 Jy ! Component: 150 - total flux cleaned = 0.00529673 Jy ! Component: 200 - total flux cleaned = 0.00576646 Jy ! Total flux subtracted in 200 components = 0.00576646 Jy ! Clean residual min=-0.005725 max=0.005005 Jy/beam ! Clean residual mean=-0.000039 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.310187 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030686 Jy ! Component: 100 - total flux cleaned = 0.000237984 Jy ! Component: 150 - total flux cleaned = 0.000179438 Jy ! Component: 200 - total flux cleaned = 0.000180362 Jy ! Total flux subtracted in 200 components = 0.000180362 Jy ! Clean residual min=-0.005185 max=0.004933 Jy/beam ! Clean residual mean=-0.000039 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.310368 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 143 components and 0.310368 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.804 mas, bmaj=7.013 mas, bpa=-19.63 degrees ! Estimated noise=2085.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00068933 Jy ! Component: 100 - total flux cleaned = 0.000928596 Jy ! Component: 150 - total flux cleaned = 0.00108107 Jy ! Component: 200 - total flux cleaned = 0.0012578 Jy ! Total flux subtracted in 200 components = 0.0012578 Jy ! Clean residual min=-0.004713 max=0.004499 Jy/beam ! Clean residual mean=-0.000024 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.311626 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 162 components and 0.311626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122748Jy sigma=0.000645 ! Fit after self-cal, rms=0.122744Jy sigma=0.000645 wmodel J1746+6226_S_2017_01_16_pus_map.mod ! Writing 162 model components to file: J1746+6226_S_2017_01_16_pus_map.mod wobs J1746+6226_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1746+6226_S_2017_01_16_pus_uvs.fits wwins J1746+6226_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J1746+6226_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00034966 Jy ! Component: 100 - total flux cleaned = -0.000584671 Jy ! Component: 150 - total flux cleaned = -0.000947161 Jy ! Component: 200 - total flux cleaned = -0.00115132 Jy ! Component: 250 - total flux cleaned = -0.00121536 Jy ! Component: 300 - total flux cleaned = -0.0010879 Jy ! Component: 350 - total flux cleaned = -0.0012098 Jy ! Component: 400 - total flux cleaned = -0.00108993 Jy ! Component: 450 - total flux cleaned = -0.00109022 Jy ! Component: 500 - total flux cleaned = -0.00131558 Jy ! Component: 550 - total flux cleaned = -0.00142566 Jy ! Component: 600 - total flux cleaned = -0.00142622 Jy ! Component: 650 - total flux cleaned = -0.0016378 Jy ! Component: 700 - total flux cleaned = -0.00179313 Jy ! Component: 750 - total flux cleaned = -0.00174208 Jy ! Component: 800 - total flux cleaned = -0.00179039 Jy ! Component: 850 - total flux cleaned = -0.0015958 Jy ! Component: 900 - total flux cleaned = -0.00174042 Jy ! Component: 950 - total flux cleaned = -0.00183475 Jy ! Component: 1000 - total flux cleaned = -0.00183462 Jy ! Component: 1050 - total flux cleaned = -0.00192672 Jy ! Component: 1100 - total flux cleaned = -0.00210751 Jy ! Component: 1150 - total flux cleaned = -0.00219702 Jy ! Component: 1200 - total flux cleaned = -0.00232845 Jy ! Component: 1250 - total flux cleaned = -0.00241539 Jy ! Component: 1300 - total flux cleaned = -0.0024579 Jy ! Component: 1350 - total flux cleaned = -0.00254236 Jy ! Component: 1400 - total flux cleaned = -0.00258383 Jy ! Component: 1450 - total flux cleaned = -0.00262554 Jy ! Component: 1500 - total flux cleaned = -0.0026667 Jy ! Component: 1550 - total flux cleaned = -0.00278783 Jy ! Component: 1600 - total flux cleaned = -0.00298644 Jy ! Component: 1650 - total flux cleaned = -0.00302514 Jy ! Component: 1700 - total flux cleaned = -0.00298646 Jy ! Component: 1750 - total flux cleaned = -0.00314031 Jy ! Component: 1800 - total flux cleaned = -0.00314032 Jy ! Component: 1850 - total flux cleaned = -0.0032535 Jy ! Component: 1900 - total flux cleaned = -0.00343919 Jy ! Component: 1950 - total flux cleaned = -0.00343886 Jy ! Component: 2000 - total flux cleaned = -0.00362034 Jy ! Component: 2050 - total flux cleaned = -0.00372797 Jy ! Component: 2100 - total flux cleaned = -0.00372811 Jy ! Component: 2150 - total flux cleaned = -0.00383339 Jy ! Component: 2200 - total flux cleaned = -0.00393773 Jy ! Component: 2250 - total flux cleaned = -0.00393758 Jy ! Component: 2300 - total flux cleaned = -0.00397193 Jy ! Component: 2350 - total flux cleaned = -0.0041069 Jy ! Component: 2400 - total flux cleaned = -0.00403942 Jy ! Component: 2450 - total flux cleaned = -0.004073 Jy ! Component: 2500 - total flux cleaned = -0.00417215 Jy ! Component: 2550 - total flux cleaned = -0.00427032 Jy ! Component: 2600 - total flux cleaned = -0.00443204 Jy ! Component: 2650 - total flux cleaned = -0.00446379 Jy ! Component: 2700 - total flux cleaned = -0.00446332 Jy ! Component: 2750 - total flux cleaned = -0.00465322 Jy ! Component: 2800 - total flux cleaned = -0.00471612 Jy ! Component: 2850 - total flux cleaned = -0.00496513 Jy ! Component: 2900 - total flux cleaned = -0.00502671 Jy ! Component: 2950 - total flux cleaned = -0.00530283 Jy ! Component: 3000 - total flux cleaned = -0.00536358 Jy ! Component: 3050 - total flux cleaned = -0.00551498 Jy ! Component: 3100 - total flux cleaned = -0.00569558 Jy ! Component: 3150 - total flux cleaned = -0.00578494 Jy ! Component: 3200 - total flux cleaned = -0.00602149 Jy ! Component: 3250 - total flux cleaned = -0.00613894 Jy ! Component: 3300 - total flux cleaned = -0.00637234 Jy ! Component: 3350 - total flux cleaned = -0.00634344 Jy ! Component: 3400 - total flux cleaned = -0.00648721 Jy ! Component: 3450 - total flux cleaned = -0.0065158 Jy ! Component: 3500 - total flux cleaned = -0.0066581 Jy ! Component: 3550 - total flux cleaned = -0.00671439 Jy ! Component: 3600 - total flux cleaned = -0.00685449 Jy ! Component: 3650 - total flux cleaned = -0.00693795 Jy ! Component: 3700 - total flux cleaned = -0.00704864 Jy ! Component: 3750 - total flux cleaned = -0.00707619 Jy ! Component: 3800 - total flux cleaned = -0.00713099 Jy ! Component: 3850 - total flux cleaned = -0.00732162 Jy ! Component: 3900 - total flux cleaned = -0.00737538 Jy ! Component: 3950 - total flux cleaned = -0.0074561 Jy ! Component: 4000 - total flux cleaned = -0.0076167 Jy ! Component: 4050 - total flux cleaned = -0.00774966 Jy ! Total flux subtracted in 4096 components = -0.00782887 Jy ! Clean residual min=-0.001592 max=0.001579 Jy/beam ! Clean residual mean=-0.000006 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.303797 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 451 components and 0.303797 Jy ![Exited script file: muppet] wmap "J1746+6226_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.804 x 7.013 at -19.63 degrees (North through East) ! Clean map min=-0.0036067 max=0.25579 Jy/beam ! Writing clean map to FITS file: J1746+6226_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.255793 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000487052 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.571226 0.571226 1.14245 2.2849 4.56981 9.13962 18.2792 36.5585 73.117 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.255 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.804 x 7.013 at -19.63 degrees (North through East) ! Clean map min=-0.0036067 max=0.25579 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1746+6226_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:19:40 2019