! Started logfile: J1745+1720_S_2017_05_27_pus_uvs.log on Fri May 3 11:12:13 2019 obs J1745+1720_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1745+1720_S_2017_05_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.522222 visibilities/baseline/integration-bin. ! Found source: J1745+1720 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1745+1720_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.602496Jy sigma=0.005845 ! Fit after self-cal, rms=0.600080Jy sigma=0.005818 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=7.547 mas, bpa=17.49 degrees ! Estimated noise=3458.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.318474 Jy ! Component: 100 - total flux cleaned = 0.422353 Jy ! Total flux subtracted in 100 components = 0.422353 Jy ! Clean residual min=-0.030438 max=0.045884 Jy/beam ! Clean residual mean=-0.000029 rms=0.010454 Jy/beam ! Combined flux in latest and established models = 0.422353 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.422353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120280Jy sigma=0.001150 ! Fit after self-cal, rms=0.119865Jy sigma=0.001145 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.639 mas, bmaj=8.257 mas, bpa=19.39 degrees ! Estimated noise=3032.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0560783 Jy ! Component: 100 - total flux cleaned = 0.0854335 Jy ! Component: 150 - total flux cleaned = 0.103556 Jy ! Component: 200 - total flux cleaned = 0.115686 Jy ! Total flux subtracted in 200 components = 0.115686 Jy ! Clean residual min=-0.024236 max=0.038437 Jy/beam ! Clean residual mean=0.000005 rms=0.007108 Jy/beam ! Combined flux in latest and established models = 0.538039 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 29 components and 0.538039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089873Jy sigma=0.000862 ! Fit after self-cal, rms=0.088999Jy sigma=0.000853 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.02 KP 0.96 ! LA 0.96 MK 1.00* NL 0.87 OV 1.16 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.03 KP 0.94 ! LA 0.91 MK 1.00* NL 0.98 OV 1.11 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 HN 1.02 KP 0.96 ! LA 0.95 MK 1.00* NL 0.97 OV 1.02 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.088999Jy sigma=0.000853 ! Fit after self-cal, rms=0.081292Jy sigma=0.000780 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.642 mas, bmaj=8.392 mas, bpa=20.43 degrees ! Estimated noise=3040.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0278803 Jy ! Component: 100 - total flux cleaned = 0.036422 Jy ! Component: 150 - total flux cleaned = 0.0390675 Jy ! Component: 200 - total flux cleaned = 0.0382009 Jy ! Total flux subtracted in 200 components = 0.0382009 Jy ! Clean residual min=-0.010984 max=0.013239 Jy/beam ! Clean residual mean=0.000009 rms=0.003133 Jy/beam ! Combined flux in latest and established models = 0.57624 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 0.57624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070741Jy sigma=0.000682 ! Fit after self-cal, rms=0.070071Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070071Jy sigma=0.000677 ! Fit after self-cal, rms=0.068237Jy sigma=0.000669 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=8.383 mas, bpa=20.49 degrees ! Estimated noise=3006.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00845791 Jy ! Component: 100 - total flux cleaned = 0.00894703 Jy ! Component: 150 - total flux cleaned = 0.00815351 Jy ! Component: 200 - total flux cleaned = 0.00753074 Jy ! Total flux subtracted in 200 components = 0.00753074 Jy ! Clean residual min=-0.009230 max=0.009185 Jy/beam ! Clean residual mean=0.000004 rms=0.002174 Jy/beam ! Combined flux in latest and established models = 0.583771 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 68 components and 0.583771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066802Jy sigma=0.000656 ! Fit after self-cal, rms=0.066628Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000735937 Jy ! Component: 100 - total flux cleaned = 0.000747364 Jy ! Component: 150 - total flux cleaned = 0.000562753 Jy ! Component: 200 - total flux cleaned = 0.000403039 Jy ! Total flux subtracted in 200 components = 0.000403039 Jy ! Clean residual min=-0.008070 max=0.007910 Jy/beam ! Clean residual mean=0.000004 rms=0.001961 Jy/beam ! Combined flux in latest and established models = 0.584174 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 87 components and 0.584174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066293Jy sigma=0.000651 ! Fit after self-cal, rms=0.066242Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066242Jy sigma=0.000651 ! Fit after self-cal, rms=0.066152Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.634 mas, bmaj=8.389 mas, bpa=20.44 degrees ! Estimated noise=3005.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246171 Jy ! Component: 100 - total flux cleaned = 0.00264723 Jy ! Component: 150 - total flux cleaned = 0.00264648 Jy ! Component: 200 - total flux cleaned = 0.00258673 Jy ! Total flux subtracted in 200 components = 0.00258673 Jy ! Clean residual min=-0.007641 max=0.006983 Jy/beam ! Clean residual mean=0.000002 rms=0.001752 Jy/beam ! Combined flux in latest and established models = 0.58676 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 104 components and 0.58676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065921Jy sigma=0.000647 ! Fit after self-cal, rms=0.065888Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015273 Jy ! Component: 100 - total flux cleaned = 0.000327292 Jy ! Component: 150 - total flux cleaned = 0.000379397 Jy ! Component: 200 - total flux cleaned = 0.000380028 Jy ! Total flux subtracted in 200 components = 0.000380028 Jy ! Clean residual min=-0.007046 max=0.007100 Jy/beam ! Clean residual mean=0.000002 rms=0.001696 Jy/beam ! Combined flux in latest and established models = 0.58714 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 118 components and 0.58714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065802Jy sigma=0.000646 ! Fit after self-cal, rms=0.065791Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065791Jy sigma=0.000646 ! Fit after self-cal, rms=0.065893Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.315 mas, bmaj=9.974 mas, bpa=5.54 degrees ! Estimated noise=3703.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000205905 Jy ! Component: 100 - total flux cleaned = -0.000494532 Jy ! Component: 150 - total flux cleaned = -0.000442099 Jy ! Component: 200 - total flux cleaned = -0.000303357 Jy ! Total flux subtracted in 200 components = -0.000303357 Jy ! Clean residual min=-0.005546 max=0.006013 Jy/beam ! Clean residual mean=0.000002 rms=0.001602 Jy/beam ! Combined flux in latest and established models = 0.586837 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 136 components and 0.586837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065845Jy sigma=0.000645 ! Fit after self-cal, rms=0.065826Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.56269e-05 Jy ! Component: 100 - total flux cleaned = 0.000518155 Jy ! Component: 150 - total flux cleaned = 0.000824815 Jy ! Component: 200 - total flux cleaned = 0.000860302 Jy ! Total flux subtracted in 200 components = 0.000860302 Jy ! Clean residual min=-0.005503 max=0.005728 Jy/beam ! Clean residual mean=0.000002 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 0.587697 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 153 components and 0.587697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065813Jy sigma=0.000644 ! Fit after self-cal, rms=0.065805Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.637 mas, bmaj=8.394 mas, bpa=20.39 degrees ! Estimated noise=3008.76 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.637 x 8.394 at 20.39 degrees (North through East) ! Clean map min=-0.0061387 max=0.38916 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=7.716 mas, bpa=19.21 degrees ! Estimated noise=3419.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.308051 Jy ! Component: 100 - total flux cleaned = 0.411881 Jy ! Component: 150 - total flux cleaned = 0.463416 Jy ! Component: 200 - total flux cleaned = 0.495721 Jy ! Total flux subtracted in 200 components = 0.495721 Jy ! Clean residual min=-0.013683 max=0.019569 Jy/beam ! Clean residual mean=-0.000006 rms=0.004842 Jy/beam ! Combined flux in latest and established models = 0.49572 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.49572 Jy ! Inverting map and beam ! Estimated beam: bmin=3.637 mas, bmaj=8.394 mas, bpa=20.39 degrees ! Estimated noise=3008.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288583 Jy ! Component: 100 - total flux cleaned = 0.0463786 Jy ! Component: 150 - total flux cleaned = 0.0582956 Jy ! Component: 200 - total flux cleaned = 0.0670594 Jy ! Total flux subtracted in 200 components = 0.0670594 Jy ! Clean residual min=-0.009073 max=0.008558 Jy/beam ! Clean residual mean=-0.000002 rms=0.002327 Jy/beam ! Combined flux in latest and established models = 0.56278 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 78 components and 0.56278 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.315 mas, bmaj=9.974 mas, bpa=5.54 degrees ! Estimated noise=3703.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0094826 Jy ! Component: 100 - total flux cleaned = 0.0150745 Jy ! Component: 150 - total flux cleaned = 0.0174 Jy ! Component: 200 - total flux cleaned = 0.0192571 Jy ! Total flux subtracted in 200 components = 0.0192571 Jy ! Clean residual min=-0.006698 max=0.005925 Jy/beam ! Clean residual mean=-0.000000 rms=0.001764 Jy/beam ! Combined flux in latest and established models = 0.582037 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161849 Jy ! Component: 100 - total flux cleaned = 0.00287072 Jy ! Component: 150 - total flux cleaned = 0.00378043 Jy ! Component: 200 - total flux cleaned = 0.00443639 Jy ! Total flux subtracted in 200 components = 0.00443639 Jy ! Clean residual min=-0.005853 max=0.005519 Jy/beam ! Clean residual mean=0.000000 rms=0.001576 Jy/beam ! Combined flux in latest and established models = 0.586473 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 169 components and 0.586474 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.637 mas, bmaj=8.394 mas, bpa=20.39 degrees ! Estimated noise=3008.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201484 Jy ! Component: 100 - total flux cleaned = 0.00246592 Jy ! Component: 150 - total flux cleaned = 0.00262692 Jy ! Component: 200 - total flux cleaned = 0.00276714 Jy ! Total flux subtracted in 200 components = 0.00276714 Jy ! Clean residual min=-0.006724 max=0.007797 Jy/beam ! Clean residual mean=0.000001 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.589241 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 193 components and 0.589241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065995Jy sigma=0.000646 ! Fit after self-cal, rms=0.065949Jy sigma=0.000646 wmodel J1745+1720_S_2017_05_27_pus_map.mod ! Writing 193 model components to file: J1745+1720_S_2017_05_27_pus_map.mod wobs J1745+1720_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1745+1720_S_2017_05_27_pus_uvs.fits wwins J1745+1720_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1745+1720_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135289 Jy ! Component: 100 - total flux cleaned = -9.35934e-06 Jy ! Component: 150 - total flux cleaned = -0.000295905 Jy ! Component: 200 - total flux cleaned = -0.000724219 Jy ! Component: 250 - total flux cleaned = -0.000396187 Jy ! Component: 300 - total flux cleaned = -8.30624e-05 Jy ! Component: 350 - total flux cleaned = 0.000431443 Jy ! Component: 400 - total flux cleaned = 0.00098558 Jy ! Component: 450 - total flux cleaned = 0.00144637 Jy ! Component: 500 - total flux cleaned = 0.00176154 Jy ! Component: 550 - total flux cleaned = 0.0021852 Jy ! Component: 600 - total flux cleaned = 0.00247708 Jy ! Component: 650 - total flux cleaned = 0.00275534 Jy ! Component: 700 - total flux cleaned = 0.00313103 Jy ! Component: 750 - total flux cleaned = 0.00354427 Jy ! Component: 800 - total flux cleaned = 0.00384343 Jy ! Component: 850 - total flux cleaned = 0.0040357 Jy ! Component: 900 - total flux cleaned = 0.00422228 Jy ! Component: 950 - total flux cleaned = 0.00440329 Jy ! Component: 1000 - total flux cleaned = 0.00466807 Jy ! Component: 1050 - total flux cleaned = 0.00484035 Jy ! Component: 1100 - total flux cleaned = 0.00500768 Jy ! Component: 1150 - total flux cleaned = 0.00508889 Jy ! Component: 1200 - total flux cleaned = 0.00525062 Jy ! Component: 1250 - total flux cleaned = 0.00529003 Jy ! Component: 1300 - total flux cleaned = 0.00532852 Jy ! Component: 1350 - total flux cleaned = 0.00525274 Jy ! Component: 1400 - total flux cleaned = 0.00532599 Jy ! Component: 1450 - total flux cleaned = 0.00528882 Jy ! Component: 1500 - total flux cleaned = 0.00535979 Jy ! Component: 1550 - total flux cleaned = 0.00542917 Jy ! Component: 1600 - total flux cleaned = 0.00556609 Jy ! Component: 1650 - total flux cleaned = 0.00559952 Jy ! Component: 1700 - total flux cleaned = 0.005764 Jy ! Component: 1750 - total flux cleaned = 0.00582842 Jy ! Component: 1800 - total flux cleaned = 0.00592431 Jy ! Component: 1850 - total flux cleaned = 0.00595568 Jy ! Component: 1900 - total flux cleaned = 0.00601795 Jy ! Component: 1950 - total flux cleaned = 0.00611029 Jy ! Component: 2000 - total flux cleaned = 0.00620218 Jy ! Component: 2050 - total flux cleaned = 0.0061718 Jy ! Component: 2100 - total flux cleaned = 0.00617182 Jy ! Component: 2150 - total flux cleaned = 0.00614163 Jy ! Component: 2200 - total flux cleaned = 0.00608207 Jy ! Component: 2250 - total flux cleaned = 0.00608243 Jy ! Component: 2300 - total flux cleaned = 0.00608239 Jy ! Component: 2350 - total flux cleaned = 0.00605338 Jy ! Component: 2400 - total flux cleaned = 0.00608261 Jy ! Component: 2450 - total flux cleaned = 0.0061116 Jy ! Component: 2500 - total flux cleaned = 0.00608283 Jy ! Component: 2550 - total flux cleaned = 0.0061118 Jy ! Component: 2600 - total flux cleaned = 0.0060543 Jy ! Component: 2650 - total flux cleaned = 0.00602569 Jy ! Component: 2700 - total flux cleaned = 0.0059687 Jy ! Component: 2750 - total flux cleaned = 0.00591169 Jy ! Component: 2800 - total flux cleaned = 0.00582606 Jy ! Component: 2850 - total flux cleaned = 0.005769 Jy ! Component: 2900 - total flux cleaned = 0.00571185 Jy ! Component: 2950 - total flux cleaned = 0.0057119 Jy ! Component: 3000 - total flux cleaned = 0.00574054 Jy ! Component: 3050 - total flux cleaned = 0.00571183 Jy ! Component: 3100 - total flux cleaned = 0.00574092 Jy ! Component: 3150 - total flux cleaned = 0.00565348 Jy ! Component: 3200 - total flux cleaned = 0.00568271 Jy ! Component: 3250 - total flux cleaned = 0.00571199 Jy ! Component: 3300 - total flux cleaned = 0.00571214 Jy ! Component: 3350 - total flux cleaned = 0.00568255 Jy ! Component: 3400 - total flux cleaned = 0.0056828 Jy ! Component: 3450 - total flux cleaned = 0.00574318 Jy ! Component: 3500 - total flux cleaned = 0.00577369 Jy ! Component: 3550 - total flux cleaned = 0.00577369 Jy ! Component: 3600 - total flux cleaned = 0.00586621 Jy ! Component: 3650 - total flux cleaned = 0.00592873 Jy ! Component: 3700 - total flux cleaned = 0.00592875 Jy ! Component: 3750 - total flux cleaned = 0.00602367 Jy ! Component: 3800 - total flux cleaned = 0.00602342 Jy ! Component: 3850 - total flux cleaned = 0.00611999 Jy ! Component: 3900 - total flux cleaned = 0.00611989 Jy ! Component: 3950 - total flux cleaned = 0.00611961 Jy ! Component: 4000 - total flux cleaned = 0.00621957 Jy ! Component: 4050 - total flux cleaned = 0.00625316 Jy ! Total flux subtracted in 4096 components = 0.00628711 Jy ! Clean residual min=-0.001946 max=0.002247 Jy/beam ! Clean residual mean=0.000005 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.595528 Jy keep ! Adding 234 model components to the UV plane model. ! The established model now contains 427 components and 0.595528 Jy ![Exited script file: muppet] wmap "J1745+1720_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.637 x 8.394 at 20.39 degrees (North through East) ! Clean map min=-0.0040411 max=0.39143 Jy/beam ! Writing clean map to FITS file: J1745+1720_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.391431 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000528537 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.40508 0.40508 0.810161 1.62032 3.24064 6.48129 12.9626 25.9251 51.8503 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.391 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.637 x 8.394 at 20.39 degrees (North through East) ! Clean map min=-0.0040411 max=0.39143 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1745+1720_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:12:17 2019