! Started logfile: J1744+4014_S_2017_05_27_pus_uvs.log on Fri May 3 11:12:08 2019 obs J1744+4014_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1744+4014_S_2017_05_27_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.972494 visibilities/baseline/integration-bin. ! Found source: J1744+4014 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 25032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1744+4014_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 738 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.817055Jy sigma=0.011451 ! Fit after self-cal, rms=0.802448Jy sigma=0.011365 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=4.87 mas, bpa=-8.502 degrees ! Estimated noise=827.872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.236371 Jy ! Component: 100 - total flux cleaned = 0.339296 Jy ! Total flux subtracted in 100 components = 0.339296 Jy ! Clean residual min=-0.024959 max=0.077731 Jy/beam ! Clean residual mean=0.000052 rms=0.007606 Jy/beam ! Combined flux in latest and established models = 0.339296 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.339296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.508430Jy sigma=0.003241 ! Fit after self-cal, rms=0.507965Jy sigma=0.003235 ! Inverting map ! Added new window around map position (-5.5, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0800058 Jy ! Component: 100 - total flux cleaned = 0.128448 Jy ! Total flux subtracted in 100 components = 0.128448 Jy ! Clean residual min=-0.017318 max=0.042986 Jy/beam ! Clean residual mean=0.000039 rms=0.005273 Jy/beam ! Combined flux in latest and established models = 0.467744 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 44 components and 0.467744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.482625Jy sigma=0.003423 ! Fit after self-cal, rms=0.481270Jy sigma=0.003411 ! Inverting map ! Added new window around map position (-10.5, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0469433 Jy ! Component: 100 - total flux cleaned = 0.0780768 Jy ! Total flux subtracted in 100 components = 0.0780768 Jy ! Clean residual min=-0.014933 max=0.021340 Jy/beam ! Clean residual mean=0.000034 rms=0.003839 Jy/beam ! Combined flux in latest and established models = 0.545821 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 72 components and 0.545821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.470627Jy sigma=0.003551 ! Fit after self-cal, rms=0.470188Jy sigma=0.003547 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271769 Jy ! Component: 100 - total flux cleaned = 0.0480351 Jy ! Total flux subtracted in 100 components = 0.0480351 Jy ! Clean residual min=-0.012961 max=0.016318 Jy/beam ! Clean residual mean=0.000031 rms=0.003221 Jy/beam ! Combined flux in latest and established models = 0.593856 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 98 components and 0.593856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.465482Jy sigma=0.003648 ! Fit after self-cal, rms=0.465365Jy sigma=0.003647 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=5.75 mas, bpa=-8.646 degrees ! Estimated noise=551.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319396 Jy ! Component: 100 - total flux cleaned = 0.053943 Jy ! Component: 150 - total flux cleaned = 0.069983 Jy ! Component: 200 - total flux cleaned = 0.0818317 Jy ! Total flux subtracted in 200 components = 0.0818317 Jy ! Clean residual min=-0.010643 max=0.016398 Jy/beam ! Clean residual mean=0.000019 rms=0.002727 Jy/beam ! Combined flux in latest and established models = 0.675688 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 124 components and 0.675688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.459935Jy sigma=0.003837 ! Fit after self-cal, rms=0.459815Jy sigma=0.003836 ! Inverting map ! Added new window around map position (-16, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153921 Jy ! Component: 100 - total flux cleaned = 0.0238346 Jy ! Component: 150 - total flux cleaned = 0.0289059 Jy ! Component: 200 - total flux cleaned = 0.032117 Jy ! Total flux subtracted in 200 components = 0.032117 Jy ! Clean residual min=-0.009114 max=0.008898 Jy/beam ! Clean residual mean=0.000015 rms=0.002327 Jy/beam ! Combined flux in latest and established models = 0.707805 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 148 components and 0.707805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.459035Jy sigma=0.003837 ! Fit after self-cal, rms=0.458942Jy sigma=0.003837 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.92 HN 1.01 KP 0.99 ! LA 0.97 MK 1.01 NL 0.93 OV 1.01 ! PT 1.04 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.96 HN 1.06 KP 0.97 ! LA 0.94 MK 1.03 NL 1.07 OV 0.98 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 16.68 FD 0.99 HN 1.06 KP 1.00 ! LA 0.99 MK 1.02 NL 1.03 OV 0.98 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.09 KP 1.00* ! LA 1.06 MK 1.24 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.458942Jy sigma=0.003837 ! Fit after self-cal, rms=8.111519Jy sigma=0.001084 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.778 mas, bmaj=5.805 mas, bpa=-8.679 degrees ! Estimated noise=587.728 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151588 Jy ! Component: 100 - total flux cleaned = 0.0185384 Jy ! Component: 150 - total flux cleaned = 0.0200686 Jy ! Component: 200 - total flux cleaned = 0.0207044 Jy ! Total flux subtracted in 200 components = 0.0207044 Jy ! Clean residual min=-0.014845 max=0.012984 Jy/beam ! Clean residual mean=0.000007 rms=0.003386 Jy/beam ! Combined flux in latest and established models = 0.728509 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 164 components and 0.728509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=8.108227Jy sigma=0.001094 ! Fit after self-cal, rms=8.108263Jy sigma=0.001092 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=8.108263Jy sigma=0.001092 ! Fit after self-cal, rms=14.441564Jy sigma=0.000880 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=5.803 mas, bpa=-8.711 degrees ! Estimated noise=591.013 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103087 Jy ! Component: 100 - total flux cleaned = 0.0154466 Jy ! Component: 150 - total flux cleaned = 0.0162999 Jy ! Component: 200 - total flux cleaned = 0.0168623 Jy ! Total flux subtracted in 200 components = 0.0168623 Jy ! Clean residual min=-0.009985 max=0.012147 Jy/beam ! Clean residual mean=-0.000020 rms=0.002399 Jy/beam ! Combined flux in latest and established models = 0.745371 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 179 components and 0.745371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=14.440319Jy sigma=0.000879 ! Fit after self-cal, rms=14.440314Jy sigma=0.000877 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-32.5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108689 Jy ! Component: 100 - total flux cleaned = 0.0149196 Jy ! Component: 150 - total flux cleaned = 0.0166626 Jy ! Component: 200 - total flux cleaned = 0.0175199 Jy ! Total flux subtracted in 200 components = 0.0175199 Jy ! Clean residual min=-0.009311 max=0.006689 Jy/beam ! Clean residual mean=-0.000024 rms=0.002229 Jy/beam ! Combined flux in latest and established models = 0.762891 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 206 components and 0.762891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=14.439631Jy sigma=0.000871 ! Fit after self-cal, rms=14.439625Jy sigma=0.000871 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=14.439625Jy sigma=0.000871 ! Fit after self-cal, rms=15.138420Jy sigma=0.000867 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.818 mas, bmaj=5.809 mas, bpa=-8.966 degrees ! Estimated noise=599.116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00780342 Jy ! Component: 100 - total flux cleaned = 0.0127993 Jy ! Component: 150 - total flux cleaned = 0.0154883 Jy ! Component: 200 - total flux cleaned = 0.0162831 Jy ! Total flux subtracted in 200 components = 0.0162831 Jy ! Clean residual min=-0.009673 max=0.006650 Jy/beam ! Clean residual mean=-0.000019 rms=0.002292 Jy/beam ! Combined flux in latest and established models = 0.779174 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 220 components and 0.779174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=15.137384Jy sigma=0.000869 ! Fit after self-cal, rms=15.137381Jy sigma=0.000868 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178801 Jy ! Component: 100 - total flux cleaned = 0.00222296 Jy ! Component: 150 - total flux cleaned = 0.00262314 Jy ! Component: 200 - total flux cleaned = 0.00287375 Jy ! Total flux subtracted in 200 components = 0.00287375 Jy ! Clean residual min=-0.009258 max=0.007005 Jy/beam ! Clean residual mean=-0.000019 rms=0.002271 Jy/beam ! Combined flux in latest and established models = 0.782048 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 231 components and 0.782048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=15.136856Jy sigma=0.000869 ! Fit after self-cal, rms=15.136855Jy sigma=0.000869 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=15.136855Jy sigma=0.000869 ! Fit after self-cal, rms=15.696520Jy sigma=0.000867 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.059 mas, bmaj=9.483 mas, bpa=-9.124 degrees ! Estimated noise=721.316 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00730796 Jy ! Component: 100 - total flux cleaned = 0.00851508 Jy ! Component: 150 - total flux cleaned = 0.00893608 Jy ! Component: 200 - total flux cleaned = 0.00912955 Jy ! Total flux subtracted in 200 components = 0.00912955 Jy ! Clean residual min=-0.010582 max=0.008427 Jy/beam ! Clean residual mean=-0.000031 rms=0.003160 Jy/beam ! Combined flux in latest and established models = 0.791177 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 251 components and 0.791177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=15.695299Jy sigma=0.000870 ! Fit after self-cal, rms=15.695296Jy sigma=0.000870 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000534535 Jy ! Component: 100 - total flux cleaned = -0.00019626 Jy ! Component: 150 - total flux cleaned = -4.19717e-05 Jy ! Component: 200 - total flux cleaned = 9.01632e-05 Jy ! Total flux subtracted in 200 components = 9.01632e-05 Jy ! Clean residual min=-0.010040 max=0.008539 Jy/beam ! Clean residual mean=-0.000029 rms=0.003133 Jy/beam ! Combined flux in latest and established models = 0.791267 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 260 components and 0.791267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=15.694618Jy sigma=0.000874 ! Fit after self-cal, rms=15.694617Jy sigma=0.000874 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.831 mas, bmaj=5.815 mas, bpa=-9.254 degrees ! Estimated noise=609.451 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.831 x 5.815 at -9.254 degrees (North through East) ! Clean map min=-0.0092091 max=0.33171 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=4.889 mas, bpa=-8.595 degrees ! Estimated noise=937.037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.26636 Jy ! Component: 100 - total flux cleaned = 0.400426 Jy ! Component: 150 - total flux cleaned = 0.490929 Jy ! Component: 200 - total flux cleaned = 0.554155 Jy ! Total flux subtracted in 200 components = 0.554155 Jy ! Clean residual min=-0.015227 max=0.035705 Jy/beam ! Clean residual mean=0.000004 rms=0.005311 Jy/beam ! Combined flux in latest and established models = 0.554154 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.554154 Jy ! Inverting map and beam ! Estimated beam: bmin=3.831 mas, bmaj=5.815 mas, bpa=-9.254 degrees ! Estimated noise=609.451 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0675711 Jy ! Component: 100 - total flux cleaned = 0.112717 Jy ! Component: 150 - total flux cleaned = 0.143792 Jy ! Component: 200 - total flux cleaned = 0.165775 Jy ! Total flux subtracted in 200 components = 0.165775 Jy ! Clean residual min=-0.009488 max=0.012724 Jy/beam ! Clean residual mean=-0.000002 rms=0.003031 Jy/beam ! Combined flux in latest and established models = 0.71993 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 85 components and 0.71993 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.059 mas, bmaj=9.483 mas, bpa=-9.124 degrees ! Estimated noise=721.316 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264078 Jy ! Component: 100 - total flux cleaned = 0.0436668 Jy ! Component: 150 - total flux cleaned = 0.0556023 Jy ! Component: 200 - total flux cleaned = 0.0616712 Jy ! Total flux subtracted in 200 components = 0.0616712 Jy ! Clean residual min=-0.011093 max=0.009370 Jy/beam ! Clean residual mean=-0.000024 rms=0.003226 Jy/beam ! Combined flux in latest and established models = 0.781601 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288038 Jy ! Component: 100 - total flux cleaned = 0.00459695 Jy ! Component: 150 - total flux cleaned = 0.00545827 Jy ! Component: 200 - total flux cleaned = 0.00603849 Jy ! Total flux subtracted in 200 components = 0.00603849 Jy ! Clean residual min=-0.010151 max=0.008747 Jy/beam ! Clean residual mean=-0.000025 rms=0.003133 Jy/beam ! Combined flux in latest and established models = 0.787639 Jy ! Adding 110 model components to the UV plane model. ! The established model now contains 171 components and 0.787639 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.831 mas, bmaj=5.815 mas, bpa=-9.254 degrees ! Estimated noise=609.451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320076 Jy ! Component: 100 - total flux cleaned = 0.00432253 Jy ! Component: 150 - total flux cleaned = 0.00482285 Jy ! Component: 200 - total flux cleaned = 0.00543012 Jy ! Total flux subtracted in 200 components = 0.00543012 Jy ! Clean residual min=-0.009045 max=0.007993 Jy/beam ! Clean residual mean=-0.000016 rms=0.002407 Jy/beam ! Combined flux in latest and established models = 0.79307 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 197 components and 0.79307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=15.694190Jy sigma=0.000881 ! Fit after self-cal, rms=15.694187Jy sigma=0.000880 wmodel J1744+4014_S_2017_05_27_pus_map.mod ! Writing 197 model components to file: J1744+4014_S_2017_05_27_pus_map.mod wobs J1744+4014_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1744+4014_S_2017_05_27_pus_uvs.fits wwins J1744+4014_S_2017_05_27_pus_map.win ! wwins: Wrote 5 windows to J1744+4014_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00361856 Jy ! Component: 100 - total flux cleaned = -0.0054237 Jy ! Component: 150 - total flux cleaned = -0.00643001 Jy ! Component: 200 - total flux cleaned = -0.00712179 Jy ! Component: 250 - total flux cleaned = -0.0076609 Jy ! Component: 300 - total flux cleaned = -0.00792597 Jy ! Component: 350 - total flux cleaned = -0.00818698 Jy ! Component: 400 - total flux cleaned = -0.00856991 Jy ! Component: 450 - total flux cleaned = -0.0086962 Jy ! Component: 500 - total flux cleaned = -0.00869608 Jy ! Component: 550 - total flux cleaned = -0.00894033 Jy ! Component: 600 - total flux cleaned = -0.00869867 Jy ! Component: 650 - total flux cleaned = -0.00881871 Jy ! Component: 700 - total flux cleaned = -0.00893703 Jy ! Component: 750 - total flux cleaned = -0.00893602 Jy ! Component: 800 - total flux cleaned = -0.00893586 Jy ! Component: 850 - total flux cleaned = -0.0088207 Jy ! Component: 900 - total flux cleaned = -0.00870827 Jy ! Component: 950 - total flux cleaned = -0.0089329 Jy ! Component: 1000 - total flux cleaned = -0.00870967 Jy ! Component: 1050 - total flux cleaned = -0.00870864 Jy ! Component: 1100 - total flux cleaned = -0.00837986 Jy ! Component: 1150 - total flux cleaned = -0.00816238 Jy ! Component: 1200 - total flux cleaned = -0.00805488 Jy ! Component: 1250 - total flux cleaned = -0.00805496 Jy ! Component: 1300 - total flux cleaned = -0.00784242 Jy ! Component: 1350 - total flux cleaned = -0.00784242 Jy ! Component: 1400 - total flux cleaned = -0.00773726 Jy ! Component: 1450 - total flux cleaned = -0.00763311 Jy ! Component: 1500 - total flux cleaned = -0.00742613 Jy ! Component: 1550 - total flux cleaned = -0.00722076 Jy ! Component: 1600 - total flux cleaned = -0.00711885 Jy ! Component: 1650 - total flux cleaned = -0.00691599 Jy ! Component: 1700 - total flux cleaned = -0.0067145 Jy ! Component: 1750 - total flux cleaned = -0.00661522 Jy ! Component: 1800 - total flux cleaned = -0.00651603 Jy ! Component: 1850 - total flux cleaned = -0.00641683 Jy ! Component: 1900 - total flux cleaned = -0.00622015 Jy ! Component: 1950 - total flux cleaned = -0.00641561 Jy ! Component: 2000 - total flux cleaned = -0.00622096 Jy ! Component: 2050 - total flux cleaned = -0.00602775 Jy ! Component: 2100 - total flux cleaned = -0.00602781 Jy ! Component: 2150 - total flux cleaned = -0.00583613 Jy ! Component: 2200 - total flux cleaned = -0.00574138 Jy ! Component: 2250 - total flux cleaned = -0.00564663 Jy ! Component: 2300 - total flux cleaned = -0.00564635 Jy ! Component: 2350 - total flux cleaned = -0.00555269 Jy ! Component: 2400 - total flux cleaned = -0.00564582 Jy ! Component: 2450 - total flux cleaned = -0.00536643 Jy ! Component: 2500 - total flux cleaned = -0.00518152 Jy ! Component: 2550 - total flux cleaned = -0.0049975 Jy ! Component: 2600 - total flux cleaned = -0.00490574 Jy ! Component: 2650 - total flux cleaned = -0.00481439 Jy ! Component: 2700 - total flux cleaned = -0.00463271 Jy ! Component: 2750 - total flux cleaned = -0.00445165 Jy ! Component: 2800 - total flux cleaned = -0.00427152 Jy ! Component: 2850 - total flux cleaned = -0.00418203 Jy ! Component: 2900 - total flux cleaned = -0.0040034 Jy ! Component: 2950 - total flux cleaned = -0.0038258 Jy ! Component: 3000 - total flux cleaned = -0.00391445 Jy ! Component: 3050 - total flux cleaned = -0.00356068 Jy ! Component: 3100 - total flux cleaned = -0.00364905 Jy ! Component: 3150 - total flux cleaned = -0.00347324 Jy ! Component: 3200 - total flux cleaned = -0.00347312 Jy ! Component: 3250 - total flux cleaned = -0.00347274 Jy ! Component: 3300 - total flux cleaned = -0.0032121 Jy ! Component: 3350 - total flux cleaned = -0.00329848 Jy ! Component: 3400 - total flux cleaned = -0.00312574 Jy ! Component: 3450 - total flux cleaned = -0.00321187 Jy ! Component: 3500 - total flux cleaned = -0.00312661 Jy ! Component: 3550 - total flux cleaned = -0.00304107 Jy ! Component: 3600 - total flux cleaned = -0.00312635 Jy ! Component: 3650 - total flux cleaned = -0.00304133 Jy ! Component: 3700 - total flux cleaned = -0.00304118 Jy ! Component: 3750 - total flux cleaned = -0.00270372 Jy ! Component: 3800 - total flux cleaned = -0.00295646 Jy ! Component: 3850 - total flux cleaned = -0.00278874 Jy ! Component: 3900 - total flux cleaned = -0.00270517 Jy ! Component: 3950 - total flux cleaned = -0.00278867 Jy ! Component: 4000 - total flux cleaned = -0.00287219 Jy ! Component: 4050 - total flux cleaned = -0.00278909 Jy ! Total flux subtracted in 4096 components = -0.00278927 Jy ! Clean residual min=-0.004128 max=0.004605 Jy/beam ! Clean residual mean=-0.000006 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 0.79028 Jy keep ! Adding 377 model components to the UV plane model. ! The established model now contains 574 components and 0.79028 Jy ![Exited script file: muppet] wmap "J1744+4014_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.831 x 5.815 at -9.254 degrees (North through East) ! Clean map min=-0.0092084 max=0.33379 Jy/beam ! Writing clean map to FITS file: J1744+4014_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.333794 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00172894 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.5539 1.5539 3.1078 6.21559 12.4312 24.8624 49.7248 99.4495 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0051 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.333 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.831 x 5.815 at -9.254 degrees (North through East) ! Clean map min=-0.0092084 max=0.33379 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1744+4014_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:12:13 2019