! Started logfile: J1743-3058_S_2017_08_12_pus_uvs.log on Fri May 10 15:04:31 2019 obs J1743-3058_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1743-3058_S_2017_08_12_pus_uva.fits ! AN table 1: 165 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.329024 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1743-3058 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 9772 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1743-3058_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 914 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 833 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 805 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1650 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.990966Jy sigma=0.006669 ! Fit after self-cal, rms=0.940365Jy sigma=0.006330 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.129 mas, bmaj=6.037 mas, bpa=5.6 degrees ! Estimated noise=2298.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0469697 Jy ! Component: 100 - total flux cleaned = 0.0577899 Jy ! Total flux subtracted in 100 components = 0.0577899 Jy ! Clean residual min=-0.005881 max=0.007257 Jy/beam ! Clean residual mean=-0.000068 rms=0.001879 Jy/beam ! Combined flux in latest and established models = 0.0577899 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0577899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098382Jy sigma=0.000644 ! Fit after self-cal, rms=0.097004Jy sigma=0.000635 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.681 mas, bmaj=6.792 mas, bpa=5.164 degrees ! Estimated noise=1381.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104693 Jy ! Component: 100 - total flux cleaned = 0.0157774 Jy ! Component: 150 - total flux cleaned = 0.0185296 Jy ! Component: 200 - total flux cleaned = 0.0199602 Jy ! Total flux subtracted in 200 components = 0.0199602 Jy ! Clean residual min=-0.009076 max=0.010375 Jy/beam ! Clean residual mean=-0.000240 rms=0.003868 Jy/beam ! Combined flux in latest and established models = 0.0777501 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.07775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095979Jy sigma=0.000628 ! Fit after self-cal, rms=0.095772Jy sigma=0.000626 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.16 ! LA 0.87 MK 1.10 NL 1.00* OV 1.42 ! PT 0.84 SC 1.02 ! ! ! Correcting IF 2. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.30 ! LA 0.79 MK 1.09 NL 1.00* OV 1.32 ! PT 0.81 SC 1.06 ! ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.03 ! LA 0.86 MK 1.08 NL 1.03 OV 1.29 ! PT 0.87 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.095772Jy sigma=0.000626 ! Fit after self-cal, rms=0.104804Jy sigma=0.000618 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.659 mas, bmaj=6.673 mas, bpa=5.238 degrees ! Estimated noise=1489.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20.5, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00915728 Jy ! Component: 100 - total flux cleaned = 0.0120684 Jy ! Component: 150 - total flux cleaned = 0.0127693 Jy ! Component: 200 - total flux cleaned = 0.0132843 Jy ! Total flux subtracted in 200 components = 0.0132843 Jy ! Clean residual min=-0.005582 max=0.008823 Jy/beam ! Clean residual mean=-0.000073 rms=0.001781 Jy/beam ! Combined flux in latest and established models = 0.0910344 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 0.0910343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104082Jy sigma=0.000612 ! Fit after self-cal, rms=0.104480Jy sigma=0.000607 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104480Jy sigma=0.000607 ! Fit after self-cal, rms=0.109577Jy sigma=0.000605 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.675 mas, bmaj=6.636 mas, bpa=5.066 degrees ! Estimated noise=1474.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00597102 Jy ! Component: 100 - total flux cleaned = 0.00631913 Jy ! Component: 150 - total flux cleaned = 0.00587721 Jy ! Component: 200 - total flux cleaned = 0.00587697 Jy ! Total flux subtracted in 200 components = 0.00587697 Jy ! Clean residual min=-0.004489 max=0.005966 Jy/beam ! Clean residual mean=-0.000053 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.0969113 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.0969113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109236Jy sigma=0.000602 ! Fit after self-cal, rms=0.109173Jy sigma=0.000600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (37.5, -30). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049759 Jy ! Component: 100 - total flux cleaned = 0.00664641 Jy ! Component: 150 - total flux cleaned = 0.00678455 Jy ! Component: 200 - total flux cleaned = 0.00662397 Jy ! Total flux subtracted in 200 components = 0.00662397 Jy ! Clean residual min=-0.003735 max=0.004622 Jy/beam ! Clean residual mean=-0.000034 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.103535 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 77 components and 0.103535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108923Jy sigma=0.000599 ! Fit after self-cal, rms=0.108412Jy sigma=0.000597 ! Inverting map ! Added new window around map position (-70.5, 108). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466705 Jy ! Component: 100 - total flux cleaned = 0.00722721 Jy ! Component: 150 - total flux cleaned = 0.00768941 Jy ! Component: 200 - total flux cleaned = 0.00787427 Jy ! Total flux subtracted in 200 components = 0.00787427 Jy ! Clean residual min=-0.003191 max=0.002809 Jy/beam ! Clean residual mean=-0.000005 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.11141 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 93 components and 0.11141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108161Jy sigma=0.000596 ! Fit after self-cal, rms=0.107650Jy sigma=0.000595 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107650Jy sigma=0.000595 ! Fit after self-cal, rms=0.105172Jy sigma=0.000595 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=6.581 mas, bpa=4.754 degrees ! Estimated noise=1445.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322274 Jy ! Component: 100 - total flux cleaned = 0.00450623 Jy ! Component: 150 - total flux cleaned = 0.00493475 Jy ! Component: 200 - total flux cleaned = 0.00509348 Jy ! Total flux subtracted in 200 components = 0.00509348 Jy ! Clean residual min=-0.002881 max=0.002598 Jy/beam ! Clean residual mean=0.000000 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.116503 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 103 components and 0.116503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105041Jy sigma=0.000594 ! Fit after self-cal, rms=0.104747Jy sigma=0.000593 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245921 Jy ! Component: 100 - total flux cleaned = 0.00280219 Jy ! Component: 150 - total flux cleaned = 0.00274902 Jy ! Component: 200 - total flux cleaned = 0.00260492 Jy ! Total flux subtracted in 200 components = 0.00260492 Jy ! Clean residual min=-0.002989 max=0.002565 Jy/beam ! Clean residual mean=0.000004 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.119108 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 114 components and 0.119108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104655Jy sigma=0.000592 ! Fit after self-cal, rms=0.104425Jy sigma=0.000592 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104425Jy sigma=0.000592 ! Fit after self-cal, rms=0.103953Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.13 mas, bmaj=22.13 mas, bpa=4.44 degrees ! Estimated noise=2058.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195209 Jy ! Component: 100 - total flux cleaned = 0.00183037 Jy ! Component: 150 - total flux cleaned = 0.00173348 Jy ! Component: 200 - total flux cleaned = 0.00175953 Jy ! Total flux subtracted in 200 components = 0.00175953 Jy ! Clean residual min=-0.002569 max=0.002246 Jy/beam ! Clean residual mean=-0.000010 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.120868 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 132 components and 0.120868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103906Jy sigma=0.000591 ! Fit after self-cal, rms=0.103885Jy sigma=0.000591 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136357 Jy ! Component: 100 - total flux cleaned = 0.00124009 Jy ! Component: 150 - total flux cleaned = 0.0012681 Jy ! Component: 200 - total flux cleaned = 0.0012702 Jy ! Total flux subtracted in 200 components = 0.0012702 Jy ! Clean residual min=-0.002344 max=0.002444 Jy/beam ! Clean residual mean=-0.000001 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.122138 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 140 components and 0.122138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103855Jy sigma=0.000591 ! Fit after self-cal, rms=0.103805Jy sigma=0.000591 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.657 mas, bmaj=6.581 mas, bpa=4.499 degrees ! Estimated noise=1437.92 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.657 x 6.581 at 4.499 degrees (North through East) ! Clean map min=-0.0030338 max=0.061134 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.152 mas, bmaj=5.981 mas, bpa=5.199 degrees ! Estimated noise=2400.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0509559 Jy ! Component: 100 - total flux cleaned = 0.0719786 Jy ! Component: 150 - total flux cleaned = 0.083751 Jy ! Component: 200 - total flux cleaned = 0.0914496 Jy ! Total flux subtracted in 200 components = 0.0914496 Jy ! Clean residual min=-0.007436 max=0.007435 Jy/beam ! Clean residual mean=-0.000034 rms=0.001858 Jy/beam ! Combined flux in latest and established models = 0.0914496 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0914496 Jy ! Inverting map and beam ! Estimated beam: bmin=2.657 mas, bmaj=6.581 mas, bpa=4.499 degrees ! Estimated noise=1437.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00875911 Jy ! Component: 100 - total flux cleaned = 0.0142282 Jy ! Component: 150 - total flux cleaned = 0.0177736 Jy ! Component: 200 - total flux cleaned = 0.0203785 Jy ! Total flux subtracted in 200 components = 0.0203785 Jy ! Clean residual min=-0.004241 max=0.003932 Jy/beam ! Clean residual mean=-0.000032 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.111828 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 60 components and 0.111828 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.13 mas, bmaj=22.13 mas, bpa=4.44 degrees ! Estimated noise=2058.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471432 Jy ! Component: 100 - total flux cleaned = 0.00701594 Jy ! Component: 150 - total flux cleaned = 0.00785292 Jy ! Component: 200 - total flux cleaned = 0.00848466 Jy ! Total flux subtracted in 200 components = 0.00848466 Jy ! Clean residual min=-0.002442 max=0.002595 Jy/beam ! Clean residual mean=-0.000018 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.120313 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000372338 Jy ! Component: 100 - total flux cleaned = 0.000740075 Jy ! Component: 150 - total flux cleaned = 0.00101671 Jy ! Component: 200 - total flux cleaned = 0.0012276 Jy ! Total flux subtracted in 200 components = 0.0012276 Jy ! Clean residual min=-0.002306 max=0.002552 Jy/beam ! Clean residual mean=-0.000006 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.12154 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 94 components and 0.12154 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.657 mas, bmaj=6.581 mas, bpa=4.499 degrees ! Estimated noise=1437.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00040971 Jy ! Component: 100 - total flux cleaned = 0.00119243 Jy ! Component: 150 - total flux cleaned = 0.0012689 Jy ! Component: 200 - total flux cleaned = 0.00121451 Jy ! Total flux subtracted in 200 components = 0.00121451 Jy ! Clean residual min=-0.003444 max=0.003067 Jy/beam ! Clean residual mean=0.000002 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.122755 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 117 components and 0.122755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103853Jy sigma=0.000591 ! Fit after self-cal, rms=0.103772Jy sigma=0.000591 wmodel J1743-3058_S_2017_08_12_pus_map.mod ! Writing 117 model components to file: J1743-3058_S_2017_08_12_pus_map.mod wobs J1743-3058_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1743-3058_S_2017_08_12_pus_uvs.fits wwins J1743-3058_S_2017_08_12_pus_map.win ! wwins: Wrote 4 windows to J1743-3058_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000552678 Jy ! Component: 100 - total flux cleaned = -0.000697264 Jy ! Component: 150 - total flux cleaned = -0.000922323 Jy ! Component: 200 - total flux cleaned = -0.00112837 Jy ! Component: 250 - total flux cleaned = -0.00140094 Jy ! Component: 300 - total flux cleaned = -0.00140112 Jy ! Component: 350 - total flux cleaned = -0.00154276 Jy ! Component: 400 - total flux cleaned = -0.00167772 Jy ! Component: 450 - total flux cleaned = -0.00170962 Jy ! Component: 500 - total flux cleaned = -0.0018365 Jy ! Component: 550 - total flux cleaned = -0.00192905 Jy ! Component: 600 - total flux cleaned = -0.00207777 Jy ! Component: 650 - total flux cleaned = -0.00222232 Jy ! Component: 700 - total flux cleaned = -0.00236341 Jy ! Component: 750 - total flux cleaned = -0.0025276 Jy ! Component: 800 - total flux cleaned = -0.0026869 Jy ! Component: 850 - total flux cleaned = -0.00279154 Jy ! Component: 900 - total flux cleaned = -0.00301854 Jy ! Component: 950 - total flux cleaned = -0.00309198 Jy ! Component: 1000 - total flux cleaned = -0.0032117 Jy ! Component: 1050 - total flux cleaned = -0.00323583 Jy ! Component: 1100 - total flux cleaned = -0.00335085 Jy ! Component: 1150 - total flux cleaned = -0.00348595 Jy ! Component: 1200 - total flux cleaned = -0.00355197 Jy ! Component: 1250 - total flux cleaned = -0.00366055 Jy ! Component: 1300 - total flux cleaned = -0.00374492 Jy ! Component: 1350 - total flux cleaned = -0.00382758 Jy ! Component: 1400 - total flux cleaned = -0.00390842 Jy ! Component: 1450 - total flux cleaned = -0.00392817 Jy ! Component: 1500 - total flux cleaned = -0.00398663 Jy ! Component: 1550 - total flux cleaned = -0.003987 Jy ! Component: 1600 - total flux cleaned = -0.00402467 Jy ! Component: 1650 - total flux cleaned = -0.00409903 Jy ! Component: 1700 - total flux cleaned = -0.00409851 Jy ! Component: 1750 - total flux cleaned = -0.00413427 Jy ! Component: 1800 - total flux cleaned = -0.00413431 Jy ! Component: 1850 - total flux cleaned = -0.00411704 Jy ! Component: 1900 - total flux cleaned = -0.00408307 Jy ! Component: 1950 - total flux cleaned = -0.00415133 Jy ! Component: 2000 - total flux cleaned = -0.00416836 Jy ! Component: 2050 - total flux cleaned = -0.00423431 Jy ! Component: 2100 - total flux cleaned = -0.00421786 Jy ! Component: 2150 - total flux cleaned = -0.00423399 Jy ! Component: 2200 - total flux cleaned = -0.00431331 Jy ! Component: 2250 - total flux cleaned = -0.00436031 Jy ! Component: 2300 - total flux cleaned = -0.00442208 Jy ! Component: 2350 - total flux cleaned = -0.00446801 Jy ! Component: 2400 - total flux cleaned = -0.00452842 Jy ! Component: 2450 - total flux cleaned = -0.00458792 Jy ! Component: 2500 - total flux cleaned = -0.00463232 Jy ! Component: 2550 - total flux cleaned = -0.00463263 Jy ! Component: 2600 - total flux cleaned = -0.00467601 Jy ! Component: 2650 - total flux cleaned = -0.00469057 Jy ! Component: 2700 - total flux cleaned = -0.00474721 Jy ! Component: 2750 - total flux cleaned = -0.00477523 Jy ! Component: 2800 - total flux cleaned = -0.00480302 Jy ! Component: 2850 - total flux cleaned = -0.00488544 Jy ! Component: 2900 - total flux cleaned = -0.00488535 Jy ! Component: 2950 - total flux cleaned = -0.00491238 Jy ! Component: 3000 - total flux cleaned = -0.00493938 Jy ! Component: 3050 - total flux cleaned = -0.00496594 Jy ! Component: 3100 - total flux cleaned = -0.00503213 Jy ! Component: 3150 - total flux cleaned = -0.00508461 Jy ! Component: 3200 - total flux cleaned = -0.00513665 Jy ! Component: 3250 - total flux cleaned = -0.00517545 Jy ! Component: 3300 - total flux cleaned = -0.00523991 Jy ! Component: 3350 - total flux cleaned = -0.005304 Jy ! Component: 3400 - total flux cleaned = -0.00535498 Jy ! Component: 3450 - total flux cleaned = -0.00540563 Jy ! Component: 3500 - total flux cleaned = -0.00543075 Jy ! Component: 3550 - total flux cleaned = -0.00548084 Jy ! Component: 3600 - total flux cleaned = -0.0055059 Jy ! Component: 3650 - total flux cleaned = -0.00555549 Jy ! Component: 3700 - total flux cleaned = -0.00561707 Jy ! Component: 3750 - total flux cleaned = -0.00564153 Jy ! Component: 3800 - total flux cleaned = -0.00569025 Jy ! Component: 3850 - total flux cleaned = -0.00567811 Jy ! Component: 3900 - total flux cleaned = -0.00575062 Jy ! Component: 3950 - total flux cleaned = -0.00573859 Jy ! Component: 4000 - total flux cleaned = -0.00579853 Jy ! Component: 4050 - total flux cleaned = -0.00582235 Jy ! Total flux subtracted in 4096 components = -0.00587002 Jy ! Clean residual min=-0.000790 max=0.000706 Jy/beam ! Clean residual mean=-0.000003 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.116885 Jy keep ! Adding 217 model components to the UV plane model. ! The established model now contains 334 components and 0.116885 Jy ![Exited script file: muppet] wmap "J1743-3058_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.657 x 6.581 at 4.499 degrees (North through East) ! Clean map min=-0.0024198 max=0.061614 Jy/beam ! Writing clean map to FITS file: J1743-3058_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0616138 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000194837 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.948668 0.948668 1.89734 3.79467 7.58934 15.1787 30.3574 60.7147 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.657 x 6.581 at 4.499 degrees (North through East) ! Clean map min=-0.0024198 max=0.061614 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1743-3058_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:04:36 2019