! Started logfile: J1743-0350_X_2017_07_09_pus_uvs.log on Wed May 8 15:29:08 2019 obs J1743-0350_X_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1743-0350_X_2017_07_09_pus_uva.fits ! AN table 1: 43 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.655297 visibilities/baseline/integration-bin. ! Found source: J1743-0350 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 979 lines of history. ! ! Reading 15216 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1743-0350_X_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.823594Jy sigma=0.022954 ! Fit after self-cal, rms=2.797941Jy sigma=0.022755 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0592% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.6911 mas, bmaj=1.681 mas, bpa=-3.351 degrees ! Estimated noise=1104.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.79499 Jy ! Component: 100 - total flux cleaned = 3.47238 Jy ! Total flux subtracted in 100 components = 3.47238 Jy ! Clean residual min=-0.108478 max=0.271227 Jy/beam ! Clean residual mean=-0.000803 rms=0.024191 Jy/beam ! Combined flux in latest and established models = 3.47238 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 3.47238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.541964Jy sigma=0.004476 ! Fit after self-cal, rms=0.541427Jy sigma=0.004472 ! Inverting map ! Your choice of large map pixels excluded 0.0592% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.297632 Jy ! Component: 100 - total flux cleaned = 0.466337 Jy ! Total flux subtracted in 100 components = 0.466337 Jy ! Clean residual min=-0.067721 max=0.087747 Jy/beam ! Clean residual mean=-0.000341 rms=0.011520 Jy/beam ! Combined flux in latest and established models = 3.93872 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 17 components and 3.93872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.257625Jy sigma=0.002085 ! Fit after self-cal, rms=0.256362Jy sigma=0.002077 ! Inverting map ! Your choice of large map pixels excluded 0.0592% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110156 Jy ! Component: 100 - total flux cleaned = 0.182099 Jy ! Total flux subtracted in 100 components = 0.182099 Jy ! Clean residual min=-0.052022 max=0.039038 Jy/beam ! Clean residual mean=-0.000174 rms=0.007930 Jy/beam ! Combined flux in latest and established models = 4.12082 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 4.12082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.184759Jy sigma=0.001443 ! Fit after self-cal, rms=0.183729Jy sigma=0.001435 ! Inverting map ! Your choice of large map pixels excluded 0.0592% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0592% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8554 mas, bmaj=1.962 mas, bpa=-2.984 degrees ! Estimated noise=718.931 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.060773 Jy ! Component: 100 - total flux cleaned = 0.0927767 Jy ! Component: 150 - total flux cleaned = 0.111182 Jy ! Component: 200 - total flux cleaned = 0.122178 Jy ! Total flux subtracted in 200 components = 0.122178 Jy ! Clean residual min=-0.039543 max=0.027010 Jy/beam ! Clean residual mean=-0.000148 rms=0.005977 Jy/beam ! Combined flux in latest and established models = 4.24299 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 39 components and 4.24299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.164732Jy sigma=0.001253 ! Fit after self-cal, rms=0.164210Jy sigma=0.001249 ! Inverting map ! Your choice of large map pixels excluded 0.0592% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.02 KP 1.05 ! LA 0.98 MK 1.01 NL 0.98 OV 1.00 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.04 KP 1.05 ! LA 0.99 MK 0.99 NL 0.97 OV 1.00 ! PT 1.05 SC 1.04 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.00 KP 1.03 ! LA 1.01 MK 1.01 NL 0.97 OV 1.00 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.02 KP 1.02 ! LA 1.01 MK 1.01 NL 0.97 OV 1.00 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.98 KP 1.01 ! LA 1.00 MK 1.03 NL 0.97 OV 1.00 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.01 KP 1.02 ! LA 1.00 MK 1.01 NL 0.96 OV 1.00 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.00 KP 1.01 ! LA 1.01 MK 1.02 NL 0.96 OV 1.00 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.00 KP 1.02 ! LA 0.99 MK 1.00 NL 0.97 OV 1.00 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.00 KP 1.01 ! LA 1.00 MK 0.98 NL 0.96 OV 0.99 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.04 KP 1.01 ! LA 1.01 MK 1.00 NL 0.97 OV 0.99 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.03 KP 1.02 ! LA 1.01 MK 1.04 NL 0.96 OV 1.00 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.99 KP 1.00 ! LA 0.99 MK 1.00 NL 0.97 OV 1.00 ! PT 1.02 SC 0.99 ! ! ! Fit before self-cal, rms=0.164210Jy sigma=0.001249 ! Fit after self-cal, rms=0.124042Jy sigma=0.000908 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8601 mas, bmaj=1.968 mas, bpa=-2.816 degrees ! Estimated noise=720.872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00398734 Jy ! Component: 100 - total flux cleaned = -0.00399175 Jy ! Component: 150 - total flux cleaned = -0.00400133 Jy ! Component: 200 - total flux cleaned = -0.00400304 Jy ! Total flux subtracted in 200 components = -0.00400304 Jy ! Clean residual min=-0.017440 max=0.012574 Jy/beam ! Clean residual mean=-0.000106 rms=0.002804 Jy/beam ! Combined flux in latest and established models = 4.23899 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 4.23899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122934Jy sigma=0.000899 ! Fit after self-cal, rms=0.122677Jy sigma=0.000897 ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122677Jy sigma=0.000897 ! Fit after self-cal, rms=0.108994Jy sigma=0.000797 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8595 mas, bmaj=1.972 mas, bpa=-2.777 degrees ! Estimated noise=720.959 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00386076 Jy ! Component: 100 - total flux cleaned = -0.00407621 Jy ! Component: 150 - total flux cleaned = -0.0042415 Jy ! Component: 200 - total flux cleaned = -0.00424439 Jy ! Total flux subtracted in 200 components = -0.00424439 Jy ! Clean residual min=-0.011824 max=0.009401 Jy/beam ! Clean residual mean=-0.000091 rms=0.001769 Jy/beam ! Combined flux in latest and established models = 4.23474 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 4.23474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108257Jy sigma=0.000791 ! Fit after self-cal, rms=0.108085Jy sigma=0.000790 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214007 Jy ! Component: 100 - total flux cleaned = -6.0503e-05 Jy ! Component: 150 - total flux cleaned = -6.07645e-05 Jy ! Component: 200 - total flux cleaned = -5.83082e-05 Jy ! Total flux subtracted in 200 components = -5.83082e-05 Jy ! Clean residual min=-0.010358 max=0.009038 Jy/beam ! Clean residual mean=-0.000091 rms=0.001716 Jy/beam ! Combined flux in latest and established models = 4.23469 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 4.23469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107658Jy sigma=0.000786 ! Fit after self-cal, rms=0.107553Jy sigma=0.000786 ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107553Jy sigma=0.000786 ! Fit after self-cal, rms=0.098727Jy sigma=0.000740 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8594 mas, bmaj=1.972 mas, bpa=-2.813 degrees ! Estimated noise=720.982 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00239697 Jy ! Component: 100 - total flux cleaned = -0.00294682 Jy ! Component: 150 - total flux cleaned = -0.00318286 Jy ! Component: 200 - total flux cleaned = -0.00328908 Jy ! Total flux subtracted in 200 components = -0.00328908 Jy ! Clean residual min=-0.008223 max=0.007804 Jy/beam ! Clean residual mean=-0.000052 rms=0.001402 Jy/beam ! Combined flux in latest and established models = 4.2314 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 4.2314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098363Jy sigma=0.000737 ! Fit after self-cal, rms=0.098300Jy sigma=0.000736 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000573801 Jy ! Component: 100 - total flux cleaned = -0.000780718 Jy ! Component: 150 - total flux cleaned = -0.000870888 Jy ! Component: 200 - total flux cleaned = -0.00103494 Jy ! Total flux subtracted in 200 components = -0.00103494 Jy ! Clean residual min=-0.007292 max=0.007742 Jy/beam ! Clean residual mean=-0.000053 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 4.23036 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 4.23036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098095Jy sigma=0.000735 ! Fit after self-cal, rms=0.098055Jy sigma=0.000734 ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (-0.4, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00708408 Jy ! Component: 100 - total flux cleaned = 0.00759698 Jy ! Component: 150 - total flux cleaned = 0.00845378 Jy ! Component: 200 - total flux cleaned = 0.00870702 Jy ! Total flux subtracted in 200 components = 0.00870702 Jy ! Clean residual min=-0.006931 max=0.005937 Jy/beam ! Clean residual mean=-0.000051 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 4.23907 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 74 components and 4.23907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097409Jy sigma=0.000729 ! Fit after self-cal, rms=0.097370Jy sigma=0.000729 ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097370Jy sigma=0.000729 ! Fit after self-cal, rms=0.097356Jy sigma=0.000728 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=2.124 mas, bmaj=3.481 mas, bpa=1.099 degrees ! Estimated noise=932.278 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00185573 Jy ! Component: 100 - total flux cleaned = -0.00209442 Jy ! Component: 150 - total flux cleaned = -0.00217594 Jy ! Component: 200 - total flux cleaned = -0.00223284 Jy ! Total flux subtracted in 200 components = -0.00223284 Jy ! Clean residual min=-0.005617 max=0.006015 Jy/beam ! Clean residual mean=-0.000104 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 4.23684 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 4.23684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097302Jy sigma=0.000728 ! Fit after self-cal, rms=0.097228Jy sigma=0.000727 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123206 Jy ! Component: 100 - total flux cleaned = -0.000185359 Jy ! Component: 150 - total flux cleaned = -0.000298134 Jy ! Component: 200 - total flux cleaned = -0.00044179 Jy ! Total flux subtracted in 200 components = -0.00044179 Jy ! Clean residual min=-0.005193 max=0.005818 Jy/beam ! Clean residual mean=-0.000105 rms=0.001653 Jy/beam ! Combined flux in latest and established models = 4.23639 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 86 components and 4.23639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097218Jy sigma=0.000727 ! Fit after self-cal, rms=0.097160Jy sigma=0.000727 ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8596 mas, bmaj=1.972 mas, bpa=-2.822 degrees ! Estimated noise=721.113 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8596 x 1.972 at -2.822 degrees (North through East) ! Clean map min=-0.0051573 max=3.7033 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097160Jy sigma=0.000727 ! Fit after self-cal, rms=0.083156Jy sigma=0.000631 ! Inverting map and beam ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8598 mas, bmaj=1.973 mas, bpa=-2.828 degrees ! Estimated noise=721.025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114167 Jy ! Component: 100 - total flux cleaned = -0.000242288 Jy ! Component: 150 - total flux cleaned = -0.000563687 Jy ! Component: 200 - total flux cleaned = -0.00066371 Jy ! Total flux subtracted in 200 components = -0.00066371 Jy ! Clean residual min=-0.005270 max=0.004812 Jy/beam ! Clean residual mean=-0.000047 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 4.23573 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 95 components and 4.23573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082872Jy sigma=0.000628 ! Fit after self-cal, rms=0.082854Jy sigma=0.000628 ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112725 Jy ! Component: 100 - total flux cleaned = 0.000206973 Jy ! Component: 150 - total flux cleaned = 0.000208579 Jy ! Component: 200 - total flux cleaned = 0.0002059 Jy ! Total flux subtracted in 200 components = 0.0002059 Jy ! Clean residual min=-0.005117 max=0.004639 Jy/beam ! Clean residual mean=-0.000048 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 4.23594 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 97 components and 4.23594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082681Jy sigma=0.000627 ! Fit after self-cal, rms=0.082669Jy sigma=0.000627 ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082669Jy sigma=0.000627 ! Fit after self-cal, rms=0.082649Jy sigma=0.000627 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.6926 mas, bmaj=1.685 mas, bpa=-3.426 degrees ! Estimated noise=1132.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.80202 Jy ! Component: 100 - total flux cleaned = 3.4841 Jy ! Component: 150 - total flux cleaned = 3.77642 Jy ! Component: 200 - total flux cleaned = 3.93838 Jy ! Total flux subtracted in 200 components = 3.93838 Jy ! Clean residual min=-0.031851 max=0.083094 Jy/beam ! Clean residual mean=-0.000297 rms=0.008374 Jy/beam ! Combined flux in latest and established models = 3.93838 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 3.93838 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8599 mas, bmaj=1.973 mas, bpa=-2.838 degrees ! Estimated noise=721.029 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.136023 Jy ! Component: 100 - total flux cleaned = 0.205513 Jy ! Component: 150 - total flux cleaned = 0.2433 Jy ! Component: 200 - total flux cleaned = 0.264748 Jy ! Total flux subtracted in 200 components = 0.264748 Jy ! Clean residual min=-0.007761 max=0.012906 Jy/beam ! Clean residual mean=-0.000080 rms=0.001891 Jy/beam ! Combined flux in latest and established models = 4.20313 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 41 components and 4.20313 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (1, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140371 Jy ! Component: 100 - total flux cleaned = 0.0232751 Jy ! Component: 150 - total flux cleaned = 0.025408 Jy ! Component: 200 - total flux cleaned = 0.0264814 Jy ! Total flux subtracted in 200 components = 0.0264814 Jy ! Clean residual min=-0.006854 max=0.005733 Jy/beam ! Clean residual mean=-0.000059 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 4.22961 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 4.22961 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=2.124 mas, bmaj=3.482 mas, bpa=1.09 degrees ! Estimated noise=931.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273958 Jy ! Component: 100 - total flux cleaned = 0.0035697 Jy ! Component: 150 - total flux cleaned = 0.00397456 Jy ! Component: 200 - total flux cleaned = 0.00413057 Jy ! Total flux subtracted in 200 components = 0.00413057 Jy ! Clean residual min=-0.004891 max=0.005374 Jy/beam ! Clean residual mean=-0.000105 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 4.23374 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.86382e-05 Jy ! Component: 100 - total flux cleaned = 0.000135883 Jy ! Component: 150 - total flux cleaned = 0.000195601 Jy ! Component: 200 - total flux cleaned = 0.000250094 Jy ! Total flux subtracted in 200 components = 0.000250094 Jy ! Clean residual min=-0.004772 max=0.005321 Jy/beam ! Clean residual mean=-0.000102 rms=0.001570 Jy/beam ! Combined flux in latest and established models = 4.23399 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 90 components and 4.23399 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8599 mas, bmaj=1.973 mas, bpa=-2.838 degrees ! Estimated noise=721.029 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00222289 Jy ! Component: 100 - total flux cleaned = -0.00222851 Jy ! Component: 150 - total flux cleaned = -0.00182276 Jy ! Component: 200 - total flux cleaned = -0.00144533 Jy ! Total flux subtracted in 200 components = -0.00144533 Jy ! Clean residual min=-0.005805 max=0.004617 Jy/beam ! Clean residual mean=-0.000052 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 4.23255 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 4.23255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084475Jy sigma=0.000640 ! Fit after self-cal, rms=0.084295Jy sigma=0.000639 wmodel J1743-0350_X_2017_07_09_pus_map.mod ! Writing 95 model components to file: J1743-0350_X_2017_07_09_pus_map.mod wobs J1743-0350_X_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1743-0350_X_2017_07_09_pus_uvs.fits wwins J1743-0350_X_2017_07_09_pus_map.win ! wwins: Wrote 3 windows to J1743-0350_X_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0024466 Jy ! Component: 100 - total flux cleaned = -0.00378837 Jy ! Component: 150 - total flux cleaned = -0.00479415 Jy ! Component: 200 - total flux cleaned = -0.00519322 Jy ! Component: 250 - total flux cleaned = -0.00557749 Jy ! Component: 300 - total flux cleaned = -0.00602651 Jy ! Component: 350 - total flux cleaned = -0.00624532 Jy ! Component: 400 - total flux cleaned = -0.00660128 Jy ! Component: 450 - total flux cleaned = -0.00681078 Jy ! Component: 500 - total flux cleaned = -0.0072207 Jy ! Component: 550 - total flux cleaned = -0.0075548 Jy ! Component: 600 - total flux cleaned = -0.00768634 Jy ! Component: 650 - total flux cleaned = -0.00787959 Jy ! Component: 700 - total flux cleaned = -0.0081324 Jy ! Component: 750 - total flux cleaned = -0.0082574 Jy ! Component: 800 - total flux cleaned = -0.00874755 Jy ! Component: 850 - total flux cleaned = -0.0089291 Jy ! Component: 900 - total flux cleaned = -0.0094027 Jy ! Component: 950 - total flux cleaned = -0.00934349 Jy ! Component: 1000 - total flux cleaned = -0.00968874 Jy ! Component: 1050 - total flux cleaned = -0.00974515 Jy ! Component: 1100 - total flux cleaned = -0.00991194 Jy ! Component: 1150 - total flux cleaned = -0.00985706 Jy ! Component: 1200 - total flux cleaned = -0.0100212 Jy ! Component: 1250 - total flux cleaned = -0.0101289 Jy ! Component: 1300 - total flux cleaned = -0.0102883 Jy ! Component: 1350 - total flux cleaned = -0.0103924 Jy ! Component: 1400 - total flux cleaned = -0.0104439 Jy ! Component: 1450 - total flux cleaned = -0.0104955 Jy ! Component: 1500 - total flux cleaned = -0.0105468 Jy ! Component: 1550 - total flux cleaned = -0.0106973 Jy ! Component: 1600 - total flux cleaned = -0.0108462 Jy ! Component: 1650 - total flux cleaned = -0.0109433 Jy ! Component: 1700 - total flux cleaned = -0.0110884 Jy ! Component: 1750 - total flux cleaned = -0.0111846 Jy ! Component: 1800 - total flux cleaned = -0.011516 Jy ! Component: 1850 - total flux cleaned = -0.0117972 Jy ! Component: 1900 - total flux cleaned = -0.0119359 Jy ! Component: 1950 - total flux cleaned = -0.011891 Jy ! Component: 2000 - total flux cleaned = -0.0118925 Jy ! Total flux subtracted in 2048 components = -0.0121629 Jy ! Clean residual min=-0.002386 max=0.002242 Jy/beam ! Clean residual mean=-0.000034 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 4.22038 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 223 components and 4.22038 Jy ![Exited script file: muppet] wmap "J1743-0350_X_2017_07_09_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8599 x 1.973 at -2.838 degrees (North through East) ! Clean map min=-0.0041784 max=3.7081 Jy/beam ! Writing clean map to FITS file: J1743-0350_X_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.70808 invert ! Inverting map ! Your choice of large map pixels excluded 0.0595% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000800177 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0647379 0.0647379 0.129476 0.258952 0.517903 1.03581 2.07161 4.14323 8.28645 16.5729 33.1458 66.2916 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(1000*peak_flux)/1000 ! peak= 3.708 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8599 x 1.973 at -2.838 degrees (North through East) ! Clean map min=-0.0041784 max=3.7081 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1743-0350_X_2017_07_09_pus_uvs.log closed on Wed May 8 15:29:10 2019