! Started logfile: J1743-0350_S_2017_10_09_pus_uvs.log on Sun May 12 13:17:06 2019 obs J1743-0350_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1743-0350_S_2017_10_09_pus_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.661111 visibilities/baseline/integration-bin. ! Found source: J1743-0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1904 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1743-0350_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.520478Jy sigma=0.012038 ! Fit after self-cal, rms=1.517155Jy sigma=0.012011 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=12.6 mas, bpa=-17.85 degrees ! Estimated noise=2593.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.76499 Jy ! Component: 100 - total flux cleaned = 2.24229 Jy ! Total flux subtracted in 100 components = 2.24229 Jy ! Clean residual min=-0.146550 max=0.192803 Jy/beam ! Clean residual mean=-0.000047 rms=0.040564 Jy/beam ! Combined flux in latest and established models = 2.2423 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 2.2423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.601817Jy sigma=0.004579 ! Fit after self-cal, rms=0.601806Jy sigma=0.004579 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=13.83 mas, bpa=-18.33 degrees ! Estimated noise=2254.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.269785 Jy ! Component: 100 - total flux cleaned = 0.416964 Jy ! Component: 150 - total flux cleaned = 0.512435 Jy ! Component: 200 - total flux cleaned = 0.578261 Jy ! Total flux subtracted in 200 components = 0.578261 Jy ! Clean residual min=-0.114218 max=0.104575 Jy/beam ! Clean residual mean=-0.000178 rms=0.027638 Jy/beam ! Combined flux in latest and established models = 2.82056 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 50 components and 2.82056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.442361Jy sigma=0.003442 ! Fit after self-cal, rms=0.442342Jy sigma=0.003442 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.83 HN 0.99 KP 1.10 ! LA 1.05 MK 0.99 NL 0.91 OV 1.00* ! PT 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.03 FD 0.88 HN 1.03 KP 1.05 ! LA 1.01 MK 1.05 NL 1.01 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.92 HN 1.02 KP 0.92 ! LA 0.79 MK 1.02 NL 1.15 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.99 KP 1.00* ! LA 1.12 MK 1.29 NL 1.00* OV 1.00* ! PT 1.01 ! ! ! Fit before self-cal, rms=0.442342Jy sigma=0.003442 ! Fit after self-cal, rms=0.258275Jy sigma=0.001935 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=14.22 mas, bpa=-18.25 degrees ! Estimated noise=2278.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0221721 Jy ! Component: 100 - total flux cleaned = -0.0240139 Jy ! Component: 150 - total flux cleaned = -0.0264515 Jy ! Component: 200 - total flux cleaned = -0.0293056 Jy ! Total flux subtracted in 200 components = -0.0293056 Jy ! Clean residual min=-0.068397 max=0.066453 Jy/beam ! Clean residual mean=-0.000046 rms=0.015669 Jy/beam ! Combined flux in latest and established models = 2.79125 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 69 components and 2.79125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252390Jy sigma=0.001888 ! Fit after self-cal, rms=0.252403Jy sigma=0.001888 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252403Jy sigma=0.001888 ! Fit after self-cal, rms=0.133914Jy sigma=0.001013 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=14.08 mas, bpa=-18.07 degrees ! Estimated noise=2270.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0259504 Jy ! Component: 100 - total flux cleaned = -0.0377721 Jy ! Component: 150 - total flux cleaned = -0.0406172 Jy ! Component: 200 - total flux cleaned = -0.0429696 Jy ! Total flux subtracted in 200 components = -0.0429696 Jy ! Clean residual min=-0.029344 max=0.018700 Jy/beam ! Clean residual mean=-0.000045 rms=0.005675 Jy/beam ! Combined flux in latest and established models = 2.74828 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 82 components and 2.74828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127995Jy sigma=0.000976 ! Fit after self-cal, rms=0.128015Jy sigma=0.000976 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114941 Jy ! Component: 100 - total flux cleaned = -0.00211502 Jy ! Component: 150 - total flux cleaned = -0.00279913 Jy ! Component: 200 - total flux cleaned = -0.00326574 Jy ! Total flux subtracted in 200 components = -0.00326574 Jy ! Clean residual min=-0.028633 max=0.018901 Jy/beam ! Clean residual mean=-0.000044 rms=0.005602 Jy/beam ! Combined flux in latest and established models = 2.74501 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 2.74501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127522Jy sigma=0.000972 ! Fit after self-cal, rms=0.127522Jy sigma=0.000972 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127522Jy sigma=0.000972 ! Fit after self-cal, rms=0.126129Jy sigma=0.000955 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=14.14 mas, bpa=-18.07 degrees ! Estimated noise=2272.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0141676 Jy ! Component: 100 - total flux cleaned = -0.0195682 Jy ! Component: 150 - total flux cleaned = -0.0212583 Jy ! Component: 200 - total flux cleaned = -0.0226058 Jy ! Total flux subtracted in 200 components = -0.0226058 Jy ! Clean residual min=-0.026131 max=0.018253 Jy/beam ! Clean residual mean=-0.000016 rms=0.004989 Jy/beam ! Combined flux in latest and established models = 2.72241 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 97 components and 2.72241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123870Jy sigma=0.000942 ! Fit after self-cal, rms=0.123873Jy sigma=0.000942 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138387 Jy ! Component: 100 - total flux cleaned = -0.00254416 Jy ! Component: 150 - total flux cleaned = -0.00364101 Jy ! Component: 200 - total flux cleaned = -0.00403043 Jy ! Total flux subtracted in 200 components = -0.00403043 Jy ! Clean residual min=-0.025522 max=0.018462 Jy/beam ! Clean residual mean=-0.000016 rms=0.004970 Jy/beam ! Combined flux in latest and established models = 2.71838 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 110 components and 2.71838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123618Jy sigma=0.000941 ! Fit after self-cal, rms=0.123618Jy sigma=0.000941 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123618Jy sigma=0.000941 ! Fit after self-cal, rms=0.123574Jy sigma=0.000932 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.213 mas, bmaj=15.04 mas, bpa=-12.23 degrees ! Estimated noise=2802.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00692012 Jy ! Component: 100 - total flux cleaned = -0.00841723 Jy ! Component: 150 - total flux cleaned = -0.00922016 Jy ! Component: 200 - total flux cleaned = -0.00987743 Jy ! Total flux subtracted in 200 components = -0.00987743 Jy ! Clean residual min=-0.023226 max=0.017209 Jy/beam ! Clean residual mean=-0.000003 rms=0.005640 Jy/beam ! Combined flux in latest and established models = 2.7085 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 118 components and 2.7085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122944Jy sigma=0.000928 ! Fit after self-cal, rms=0.122936Jy sigma=0.000928 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000550923 Jy ! Component: 100 - total flux cleaned = -0.000894634 Jy ! Component: 150 - total flux cleaned = -0.00119507 Jy ! Component: 200 - total flux cleaned = -0.00146267 Jy ! Total flux subtracted in 200 components = -0.00146267 Jy ! Clean residual min=-0.022853 max=0.017254 Jy/beam ! Clean residual mean=-0.000003 rms=0.005578 Jy/beam ! Combined flux in latest and established models = 2.70704 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 126 components and 2.70704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123050Jy sigma=0.000929 ! Fit after self-cal, rms=0.123046Jy sigma=0.000929 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=14.21 mas, bpa=-18.08 degrees ! Estimated noise=2275.57 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.389 x 14.21 at -18.08 degrees (North through East) ! Clean map min=-0.02297 max=2.2617 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123046Jy sigma=0.000929 ! Fit after self-cal, rms=0.101541Jy sigma=0.000741 ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=14.25 mas, bpa=-18.06 degrees ! Estimated noise=2273.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00665967 Jy ! Component: 100 - total flux cleaned = -0.00821346 Jy ! Component: 150 - total flux cleaned = -0.00983733 Jy ! Component: 200 - total flux cleaned = -0.0112096 Jy ! Total flux subtracted in 200 components = -0.0112096 Jy ! Clean residual min=-0.021616 max=0.016418 Jy/beam ! Clean residual mean=0.000010 rms=0.004279 Jy/beam ! Combined flux in latest and established models = 2.69583 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 132 components and 2.69583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100497Jy sigma=0.000734 ! Fit after self-cal, rms=0.100500Jy sigma=0.000734 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000966656 Jy ! Component: 100 - total flux cleaned = -0.00145322 Jy ! Component: 150 - total flux cleaned = -0.00179241 Jy ! Component: 200 - total flux cleaned = -0.00210934 Jy ! Total flux subtracted in 200 components = -0.00210934 Jy ! Clean residual min=-0.021163 max=0.016459 Jy/beam ! Clean residual mean=0.000010 rms=0.004266 Jy/beam ! Combined flux in latest and established models = 2.69372 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 139 components and 2.69372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100200Jy sigma=0.000732 ! Fit after self-cal, rms=0.100203Jy sigma=0.000732 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100203Jy sigma=0.000732 ! Fit after self-cal, rms=0.100313Jy sigma=0.000728 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.862 mas, bmaj=12.68 mas, bpa=-17.59 degrees ! Estimated noise=2592.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.76064 Jy ! Component: 100 - total flux cleaned = 2.21909 Jy ! Component: 150 - total flux cleaned = 2.39626 Jy ! Component: 200 - total flux cleaned = 2.50153 Jy ! Total flux subtracted in 200 components = 2.50153 Jy ! Clean residual min=-0.045725 max=0.062943 Jy/beam ! Clean residual mean=0.000023 rms=0.010994 Jy/beam ! Combined flux in latest and established models = 2.50153 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 2.50153 Jy ! Inverting map and beam ! Estimated beam: bmin=3.382 mas, bmaj=14.31 mas, bpa=-18.07 degrees ! Estimated noise=2275.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0873595 Jy ! Component: 100 - total flux cleaned = 0.136519 Jy ! Component: 150 - total flux cleaned = 0.165575 Jy ! Component: 200 - total flux cleaned = 0.173595 Jy ! Total flux subtracted in 200 components = 0.173595 Jy ! Clean residual min=-0.022945 max=0.018862 Jy/beam ! Clean residual mean=0.000016 rms=0.005331 Jy/beam ! Combined flux in latest and established models = 2.67513 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 81 components and 2.67513 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.211 mas, bmaj=15.13 mas, bpa=-12.38 degrees ! Estimated noise=2804.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00957837 Jy ! Component: 100 - total flux cleaned = 0.0101607 Jy ! Component: 150 - total flux cleaned = 0.0110631 Jy ! Component: 200 - total flux cleaned = 0.0117714 Jy ! Total flux subtracted in 200 components = 0.0117714 Jy ! Clean residual min=-0.021167 max=0.017663 Jy/beam ! Clean residual mean=0.000021 rms=0.005450 Jy/beam ! Combined flux in latest and established models = 2.6869 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578349 Jy ! Component: 100 - total flux cleaned = 0.00105192 Jy ! Component: 150 - total flux cleaned = 0.00147571 Jy ! Component: 200 - total flux cleaned = 0.00167617 Jy ! Total flux subtracted in 200 components = 0.00167617 Jy ! Clean residual min=-0.020268 max=0.017199 Jy/beam ! Clean residual mean=0.000020 rms=0.005320 Jy/beam ! Combined flux in latest and established models = 2.68858 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 113 components and 2.68858 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.382 mas, bmaj=14.31 mas, bpa=-18.07 degrees ! Estimated noise=2275.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00616826 Jy ! Component: 100 - total flux cleaned = -0.00488612 Jy ! Component: 150 - total flux cleaned = -0.00416587 Jy ! Component: 200 - total flux cleaned = -0.00320054 Jy ! Total flux subtracted in 200 components = -0.00320054 Jy ! Clean residual min=-0.021382 max=0.014556 Jy/beam ! Clean residual mean=0.000014 rms=0.004534 Jy/beam ! Combined flux in latest and established models = 2.68537 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 125 components and 2.68537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102776Jy sigma=0.000761 ! Fit after self-cal, rms=0.102765Jy sigma=0.000761 wmodel J1743-0350_S_2017_10_09_pus_map.mod ! Writing 125 model components to file: J1743-0350_S_2017_10_09_pus_map.mod wobs J1743-0350_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1743-0350_S_2017_10_09_pus_uvs.fits wwins J1743-0350_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1743-0350_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00978676 Jy ! Component: 100 - total flux cleaned = -0.0183995 Jy ! Component: 150 - total flux cleaned = -0.0261773 Jy ! Component: 200 - total flux cleaned = -0.0313223 Jy ! Component: 250 - total flux cleaned = -0.0358517 Jy ! Component: 300 - total flux cleaned = -0.0391195 Jy ! Component: 350 - total flux cleaned = -0.0419742 Jy ! Component: 400 - total flux cleaned = -0.0437815 Jy ! Component: 450 - total flux cleaned = -0.0450753 Jy ! Component: 500 - total flux cleaned = -0.0461083 Jy ! Component: 550 - total flux cleaned = -0.0474881 Jy ! Component: 600 - total flux cleaned = -0.0491819 Jy ! Component: 650 - total flux cleaned = -0.0508099 Jy ! Component: 700 - total flux cleaned = -0.0525516 Jy ! Component: 750 - total flux cleaned = -0.0542273 Jy ! Component: 800 - total flux cleaned = -0.055362 Jy ! Component: 850 - total flux cleaned = -0.0569218 Jy ! Component: 900 - total flux cleaned = -0.0579751 Jy ! Component: 950 - total flux cleaned = -0.0591388 Jy ! Component: 1000 - total flux cleaned = -0.060125 Jy ! Component: 1050 - total flux cleaned = -0.0605298 Jy ! Component: 1100 - total flux cleaned = -0.0605268 Jy ! Component: 1150 - total flux cleaned = -0.0609101 Jy ! Component: 1200 - total flux cleaned = -0.0610346 Jy ! Component: 1250 - total flux cleaned = -0.0616353 Jy ! Component: 1300 - total flux cleaned = -0.0616317 Jy ! Component: 1350 - total flux cleaned = -0.0618649 Jy ! Component: 1400 - total flux cleaned = -0.0625312 Jy ! Component: 1450 - total flux cleaned = -0.0626412 Jy ! Component: 1500 - total flux cleaned = -0.0631732 Jy ! Component: 1550 - total flux cleaned = -0.0635863 Jy ! Component: 1600 - total flux cleaned = -0.0637845 Jy ! Component: 1650 - total flux cleaned = -0.0640796 Jy ! Component: 1700 - total flux cleaned = -0.064176 Jy ! Component: 1750 - total flux cleaned = -0.0646405 Jy ! Component: 1800 - total flux cleaned = -0.064642 Jy ! Component: 1850 - total flux cleaned = -0.0649956 Jy ! Component: 1900 - total flux cleaned = -0.065169 Jy ! Component: 1950 - total flux cleaned = -0.0652538 Jy ! Component: 2000 - total flux cleaned = -0.0655874 Jy ! Component: 2050 - total flux cleaned = -0.065751 Jy ! Component: 2100 - total flux cleaned = -0.0657512 Jy ! Component: 2150 - total flux cleaned = -0.0658296 Jy ! Component: 2200 - total flux cleaned = -0.0660571 Jy ! Component: 2250 - total flux cleaned = -0.0662809 Jy ! Component: 2300 - total flux cleaned = -0.0665748 Jy ! Component: 2350 - total flux cleaned = -0.06679 Jy ! Component: 2400 - total flux cleaned = -0.0668617 Jy ! Component: 2450 - total flux cleaned = -0.0672795 Jy ! Component: 2500 - total flux cleaned = -0.0673485 Jy ! Component: 2550 - total flux cleaned = -0.067616 Jy ! Component: 2600 - total flux cleaned = -0.0678783 Jy ! Component: 2650 - total flux cleaned = -0.0681369 Jy ! Component: 2700 - total flux cleaned = -0.0683278 Jy ! Component: 2750 - total flux cleaned = -0.0687028 Jy ! Component: 2800 - total flux cleaned = -0.0687647 Jy ! Component: 2850 - total flux cleaned = -0.0690697 Jy ! Component: 2900 - total flux cleaned = -0.0691903 Jy ! Component: 2950 - total flux cleaned = -0.0695453 Jy ! Component: 3000 - total flux cleaned = -0.0697772 Jy ! Component: 3050 - total flux cleaned = -0.0698917 Jy ! Component: 3100 - total flux cleaned = -0.0702869 Jy ! Component: 3150 - total flux cleaned = -0.0706204 Jy ! Component: 3200 - total flux cleaned = -0.0707297 Jy ! Component: 3250 - total flux cleaned = -0.0710541 Jy ! Component: 3300 - total flux cleaned = -0.0713202 Jy ! Component: 3350 - total flux cleaned = -0.0714778 Jy ! Component: 3400 - total flux cleaned = -0.0717886 Jy ! Component: 3450 - total flux cleaned = -0.0718399 Jy ! Component: 3500 - total flux cleaned = -0.072093 Jy ! Component: 3550 - total flux cleaned = -0.0723421 Jy ! Component: 3600 - total flux cleaned = -0.0725876 Jy ! Component: 3650 - total flux cleaned = -0.0727331 Jy ! Component: 3700 - total flux cleaned = -0.0729252 Jy ! Component: 3750 - total flux cleaned = -0.0730675 Jy ! Component: 3800 - total flux cleaned = -0.0731625 Jy ! Component: 3850 - total flux cleaned = -0.0733028 Jy ! Component: 3900 - total flux cleaned = -0.0733495 Jy ! Component: 3950 - total flux cleaned = -0.0735765 Jy ! Component: 4000 - total flux cleaned = -0.0735765 Jy ! Component: 4050 - total flux cleaned = -0.0736658 Jy ! Total flux subtracted in 4096 components = -0.0738862 Jy ! Clean residual min=-0.002392 max=0.002381 Jy/beam ! Clean residual mean=0.000003 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 2.61149 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 396 components and 2.61149 Jy ![Exited script file: muppet] wmap "J1743-0350_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.382 x 14.31 at -18.07 degrees (North through East) ! Clean map min=-0.014028 max=2.2929 Jy/beam ! Writing clean map to FITS file: J1743-0350_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.29295 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000797442 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.104334 0.104334 0.208668 0.417336 0.834672 1.66934 3.33869 6.67738 13.3548 26.7095 53.419 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.292 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.382 x 14.31 at -18.07 degrees (North through East) ! Clean map min=-0.014028 max=2.2929 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1743-0350_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:17:11 2019