! Started logfile: J1743-0350_S_2017_08_12_pus_uvs.log on Fri May 10 15:04:27 2019 obs J1743-0350_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1743-0350_S_2017_08_12_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.557778 visibilities/baseline/integration-bin. ! Found source: J1743-0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 3012 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1743-0350_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.322576Jy sigma=0.011430 ! Fit after self-cal, rms=1.290950Jy sigma=0.011139 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.493 mas, bmaj=7.352 mas, bpa=-5.966 degrees ! Estimated noise=2913.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.54623 Jy ! Component: 100 - total flux cleaned = 1.90598 Jy ! Total flux subtracted in 100 components = 1.90598 Jy ! Clean residual min=-0.189312 max=0.197029 Jy/beam ! Clean residual mean=0.001427 rms=0.049522 Jy/beam ! Combined flux in latest and established models = 1.90598 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.90598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.519437Jy sigma=0.004498 ! Fit after self-cal, rms=0.519429Jy sigma=0.004498 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=7.736 mas, bpa=-2.59 degrees ! Estimated noise=1930.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.311598 Jy ! Component: 100 - total flux cleaned = 0.422598 Jy ! Component: 150 - total flux cleaned = 0.477675 Jy ! Component: 200 - total flux cleaned = 0.506059 Jy ! Total flux subtracted in 200 components = 0.506059 Jy ! Clean residual min=-0.060470 max=0.048772 Jy/beam ! Clean residual mean=0.000306 rms=0.011079 Jy/beam ! Combined flux in latest and established models = 2.41204 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 2.41204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316536Jy sigma=0.002776 ! Fit after self-cal, rms=0.316479Jy sigma=0.002776 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.99 KP 1.05 ! LA 1.00 MK 1.03 NL 0.87 OV 1.00 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 1.01 ! LA 0.97 MK 1.02 NL 1.05 OV 1.05 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.98 KP 0.97 ! LA 0.97 MK 1.05 NL 0.96 OV 0.96 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.316479Jy sigma=0.002776 ! Fit after self-cal, rms=0.292648Jy sigma=0.002551 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=7.764 mas, bpa=-1.721 degrees ! Estimated noise=1935.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0126879 Jy ! Component: 100 - total flux cleaned = -0.0157412 Jy ! Component: 150 - total flux cleaned = -0.0168145 Jy ! Component: 200 - total flux cleaned = -0.0173721 Jy ! Total flux subtracted in 200 components = -0.0173721 Jy ! Clean residual min=-0.038766 max=0.042818 Jy/beam ! Clean residual mean=0.000254 rms=0.009360 Jy/beam ! Combined flux in latest and established models = 2.39467 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 2.39467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291950Jy sigma=0.002547 ! Fit after self-cal, rms=0.291918Jy sigma=0.002547 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291918Jy sigma=0.002547 ! Fit after self-cal, rms=18.198675Jy sigma=0.000815 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=7.761 mas, bpa=-1.804 degrees ! Estimated noise=1933.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00329081 Jy ! Component: 100 - total flux cleaned = -0.00457598 Jy ! Component: 150 - total flux cleaned = -0.0051279 Jy ! Component: 200 - total flux cleaned = -0.00585105 Jy ! Total flux subtracted in 200 components = -0.00585105 Jy ! Clean residual min=-0.014151 max=0.015773 Jy/beam ! Clean residual mean=-0.000050 rms=0.002934 Jy/beam ! Combined flux in latest and established models = 2.38882 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 2.38882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.198673Jy sigma=0.000802 ! Fit after self-cal, rms=18.199108Jy sigma=0.000801 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (46, -65.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0065227 Jy ! Component: 100 - total flux cleaned = 0.00336596 Jy ! Component: 150 - total flux cleaned = 0.000356277 Jy ! Component: 200 - total flux cleaned = -0.0020276 Jy ! Total flux subtracted in 200 components = -0.0020276 Jy ! Clean residual min=-0.012662 max=0.012505 Jy/beam ! Clean residual mean=-0.000042 rms=0.002589 Jy/beam ! Combined flux in latest and established models = 2.38679 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 2.38679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.198944Jy sigma=0.000775 ! Fit after self-cal, rms=18.199076Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.199076Jy sigma=0.000772 ! Fit after self-cal, rms=18.510004Jy sigma=0.000712 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.896 mas, bmaj=7.763 mas, bpa=-1.78 degrees ! Estimated noise=1935.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00179036 Jy ! Component: 100 - total flux cleaned = -0.00330261 Jy ! Component: 150 - total flux cleaned = -0.0040611 Jy ! Component: 200 - total flux cleaned = -0.00474699 Jy ! Total flux subtracted in 200 components = -0.00474699 Jy ! Clean residual min=-0.008554 max=0.007638 Jy/beam ! Clean residual mean=-0.000027 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 2.38204 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 2.38204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.509947Jy sigma=0.000705 ! Fit after self-cal, rms=18.510014Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000354719 Jy ! Component: 100 - total flux cleaned = -0.00128736 Jy ! Component: 150 - total flux cleaned = -0.00155987 Jy ! Component: 200 - total flux cleaned = -0.00207786 Jy ! Total flux subtracted in 200 components = -0.00207786 Jy ! Clean residual min=-0.007810 max=0.007166 Jy/beam ! Clean residual mean=-0.000024 rms=0.001471 Jy/beam ! Combined flux in latest and established models = 2.37996 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 2.37996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.509995Jy sigma=0.000700 ! Fit after self-cal, rms=18.510008Jy sigma=0.000700 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.510008Jy sigma=0.000700 ! Fit after self-cal, rms=18.540119Jy sigma=0.000700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.221 mas, bmaj=14.85 mas, bpa=-3.968 degrees ! Estimated noise=2545.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00431473 Jy ! Component: 100 - total flux cleaned = -0.00593392 Jy ! Component: 150 - total flux cleaned = -0.00622923 Jy ! Component: 200 - total flux cleaned = -0.00643344 Jy ! Total flux subtracted in 200 components = -0.00643344 Jy ! Clean residual min=-0.005212 max=0.007213 Jy/beam ! Clean residual mean=-0.000051 rms=0.001717 Jy/beam ! Combined flux in latest and established models = 2.37353 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 79 components and 2.37353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.540154Jy sigma=0.000698 ! Fit after self-cal, rms=18.540173Jy sigma=0.000698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000359507 Jy ! Component: 100 - total flux cleaned = -0.000551878 Jy ! Component: 150 - total flux cleaned = -0.000670061 Jy ! Component: 200 - total flux cleaned = -0.00083507 Jy ! Total flux subtracted in 200 components = -0.00083507 Jy ! Clean residual min=-0.005053 max=0.007125 Jy/beam ! Clean residual mean=-0.000050 rms=0.001676 Jy/beam ! Combined flux in latest and established models = 2.37269 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 83 components and 2.37269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.540190Jy sigma=0.000697 ! Fit after self-cal, rms=18.540199Jy sigma=0.000697 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.897 mas, bmaj=7.765 mas, bpa=-1.766 degrees ! Estimated noise=1936.09 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.897 x 7.765 at -1.766 degrees (North through East) ! Clean map min=-0.0074934 max=2.2148 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.540199Jy sigma=0.000697 ! Fit after self-cal, rms=18.798536Jy sigma=0.000615 ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=7.769 mas, bpa=-1.77 degrees ! Estimated noise=1935.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000725131 Jy ! Component: 100 - total flux cleaned = -0.00130332 Jy ! Component: 150 - total flux cleaned = -0.00191215 Jy ! Component: 200 - total flux cleaned = -0.00218487 Jy ! Total flux subtracted in 200 components = -0.00218487 Jy ! Clean residual min=-0.007179 max=0.006280 Jy/beam ! Clean residual mean=-0.000024 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 2.37051 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 2.37051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.798502Jy sigma=0.000613 ! Fit after self-cal, rms=18.798529Jy sigma=0.000612 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.68165e-05 Jy ! Component: 100 - total flux cleaned = -0.000390949 Jy ! Component: 150 - total flux cleaned = -0.000628812 Jy ! Component: 200 - total flux cleaned = -0.000777062 Jy ! Total flux subtracted in 200 components = -0.000777062 Jy ! Clean residual min=-0.006837 max=0.005961 Jy/beam ! Clean residual mean=-0.000023 rms=0.001312 Jy/beam ! Combined flux in latest and established models = 2.36973 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 100 components and 2.36973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.798525Jy sigma=0.000611 ! Fit after self-cal, rms=18.798523Jy sigma=0.000611 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.798523Jy sigma=0.000611 ! Fit after self-cal, rms=18.807541Jy sigma=0.000611 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.477 mas, bmaj=7.221 mas, bpa=-3.847 degrees ! Estimated noise=3290.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.71592 Jy ! Component: 100 - total flux cleaned = 2.09831 Jy ! Component: 150 - total flux cleaned = 2.23601 Jy ! Component: 200 - total flux cleaned = 2.30281 Jy ! Total flux subtracted in 200 components = 2.30281 Jy ! Clean residual min=-0.014953 max=0.031159 Jy/beam ! Clean residual mean=-0.000025 rms=0.004429 Jy/beam ! Combined flux in latest and established models = 2.30281 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 2.30281 Jy ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=7.77 mas, bpa=-1.763 degrees ! Estimated noise=1935.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.038466 Jy ! Component: 100 - total flux cleaned = 0.0577099 Jy ! Component: 150 - total flux cleaned = 0.0683024 Jy ! Component: 200 - total flux cleaned = 0.0700276 Jy ! Total flux subtracted in 200 components = 0.0700276 Jy ! Clean residual min=-0.006091 max=0.006499 Jy/beam ! Clean residual mean=-0.000026 rms=0.001562 Jy/beam ! Combined flux in latest and established models = 2.37283 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 56 components and 2.37283 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.224 mas, bmaj=14.86 mas, bpa=-3.984 degrees ! Estimated noise=2542.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.15848e-05 Jy ! Component: 100 - total flux cleaned = -0.000827003 Jy ! Component: 150 - total flux cleaned = -0.00146653 Jy ! Component: 200 - total flux cleaned = -0.00202556 Jy ! Total flux subtracted in 200 components = -0.00202556 Jy ! Clean residual min=-0.006954 max=0.007249 Jy/beam ! Clean residual mean=-0.000058 rms=0.001898 Jy/beam ! Combined flux in latest and established models = 2.37081 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000400716 Jy ! Component: 100 - total flux cleaned = -0.000857701 Jy ! Component: 150 - total flux cleaned = -0.00119345 Jy ! Component: 200 - total flux cleaned = -0.00150535 Jy ! Total flux subtracted in 200 components = -0.00150535 Jy ! Clean residual min=-0.006269 max=0.007269 Jy/beam ! Clean residual mean=-0.000055 rms=0.001802 Jy/beam ! Combined flux in latest and established models = 2.3693 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 76 components and 2.3693 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=7.77 mas, bpa=-1.763 degrees ! Estimated noise=1935.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137822 Jy ! Component: 100 - total flux cleaned = 0.00138055 Jy ! Component: 150 - total flux cleaned = 0.00115891 Jy ! Component: 200 - total flux cleaned = 0.00105915 Jy ! Total flux subtracted in 200 components = 0.00105915 Jy ! Clean residual min=-0.005862 max=0.005973 Jy/beam ! Clean residual mean=-0.000025 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 2.37036 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 93 components and 2.37036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.807755Jy sigma=0.000611 ! Fit after self-cal, rms=18.807417Jy sigma=0.000610 wmodel J1743-0350_S_2017_08_12_pus_map.mod ! Writing 93 model components to file: J1743-0350_S_2017_08_12_pus_map.mod wobs J1743-0350_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1743-0350_S_2017_08_12_pus_uvs.fits wwins J1743-0350_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1743-0350_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000910458 Jy ! Component: 100 - total flux cleaned = 0.00200645 Jy ! Component: 150 - total flux cleaned = 0.00276804 Jy ! Component: 200 - total flux cleaned = 0.00300716 Jy ! Component: 250 - total flux cleaned = 0.00308533 Jy ! Component: 300 - total flux cleaned = 0.00315752 Jy ! Component: 350 - total flux cleaned = 0.00336509 Jy ! Component: 400 - total flux cleaned = 0.00336491 Jy ! Component: 450 - total flux cleaned = 0.00343138 Jy ! Component: 500 - total flux cleaned = 0.0033678 Jy ! Component: 550 - total flux cleaned = 0.00336829 Jy ! Component: 600 - total flux cleaned = 0.00330971 Jy ! Component: 650 - total flux cleaned = 0.0031932 Jy ! Component: 700 - total flux cleaned = 0.00331044 Jy ! Component: 750 - total flux cleaned = 0.00331056 Jy ! Component: 800 - total flux cleaned = 0.00347828 Jy ! Component: 850 - total flux cleaned = 0.00353307 Jy ! Component: 900 - total flux cleaned = 0.00358756 Jy ! Component: 950 - total flux cleaned = 0.00374658 Jy ! Component: 1000 - total flux cleaned = 0.00390182 Jy ! Component: 1050 - total flux cleaned = 0.00395171 Jy ! Component: 1100 - total flux cleaned = 0.00400124 Jy ! Component: 1150 - total flux cleaned = 0.00404988 Jy ! Component: 1200 - total flux cleaned = 0.00419525 Jy ! Component: 1250 - total flux cleaned = 0.00424312 Jy ! Component: 1300 - total flux cleaned = 0.00457118 Jy ! Component: 1350 - total flux cleaned = 0.00457081 Jy ! Component: 1400 - total flux cleaned = 0.00475342 Jy ! Component: 1450 - total flux cleaned = 0.00475309 Jy ! Component: 1500 - total flux cleaned = 0.00488601 Jy ! Component: 1550 - total flux cleaned = 0.00484211 Jy ! Component: 1600 - total flux cleaned = 0.0048853 Jy ! Component: 1650 - total flux cleaned = 0.0050125 Jy ! Component: 1700 - total flux cleaned = 0.00517954 Jy ! Component: 1750 - total flux cleaned = 0.00513776 Jy ! Component: 1800 - total flux cleaned = 0.00525949 Jy ! Component: 1850 - total flux cleaned = 0.00534027 Jy ! Component: 1900 - total flux cleaned = 0.00538001 Jy ! Component: 1950 - total flux cleaned = 0.0054194 Jy ! Component: 2000 - total flux cleaned = 0.00561302 Jy ! Component: 2050 - total flux cleaned = 0.00546017 Jy ! Component: 2100 - total flux cleaned = 0.00564889 Jy ! Component: 2150 - total flux cleaned = 0.0056112 Jy ! Component: 2200 - total flux cleaned = 0.00553774 Jy ! Component: 2250 - total flux cleaned = 0.00571979 Jy ! Component: 2300 - total flux cleaned = 0.00564725 Jy ! Component: 2350 - total flux cleaned = 0.00546894 Jy ! Component: 2400 - total flux cleaned = 0.00554002 Jy ! Component: 2450 - total flux cleaned = 0.00553954 Jy ! Component: 2500 - total flux cleaned = 0.00546987 Jy ! Component: 2550 - total flux cleaned = 0.00543539 Jy ! Component: 2600 - total flux cleaned = 0.00536735 Jy ! Component: 2650 - total flux cleaned = 0.00530029 Jy ! Component: 2700 - total flux cleaned = 0.00530063 Jy ! Component: 2750 - total flux cleaned = 0.00516969 Jy ! Component: 2800 - total flux cleaned = 0.00516978 Jy ! Component: 2850 - total flux cleaned = 0.00507397 Jy ! Component: 2900 - total flux cleaned = 0.0050418 Jy ! Component: 2950 - total flux cleaned = 0.00494676 Jy ! Component: 3000 - total flux cleaned = 0.00485284 Jy ! Component: 3050 - total flux cleaned = 0.00472876 Jy ! Component: 3100 - total flux cleaned = 0.00469832 Jy ! Component: 3150 - total flux cleaned = 0.00472858 Jy ! Component: 3200 - total flux cleaned = 0.00460731 Jy ! Component: 3250 - total flux cleaned = 0.00451748 Jy ! Component: 3300 - total flux cleaned = 0.00448811 Jy ! Component: 3350 - total flux cleaned = 0.00442907 Jy ! Component: 3400 - total flux cleaned = 0.0043415 Jy ! Component: 3450 - total flux cleaned = 0.00428361 Jy ! Component: 3500 - total flux cleaned = 0.00422622 Jy ! Component: 3550 - total flux cleaned = 0.00419769 Jy ! Component: 3600 - total flux cleaned = 0.00414097 Jy ! Component: 3650 - total flux cleaned = 0.00408493 Jy ! Component: 3700 - total flux cleaned = 0.00402916 Jy ! Component: 3750 - total flux cleaned = 0.00405678 Jy ! Component: 3800 - total flux cleaned = 0.00397462 Jy ! Component: 3850 - total flux cleaned = 0.00397452 Jy ! Component: 3900 - total flux cleaned = 0.00408221 Jy ! Component: 3950 - total flux cleaned = 0.00397506 Jy ! Component: 4000 - total flux cleaned = 0.00400169 Jy ! Component: 4050 - total flux cleaned = 0.00392253 Jy ! Total flux subtracted in 4096 components = 0.00387018 Jy ! Clean residual min=-0.001811 max=0.001586 Jy/beam ! Clean residual mean=-0.000010 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 2.37423 Jy keep ! Adding 234 model components to the UV plane model. ! The established model now contains 327 components and 2.37423 Jy ![Exited script file: muppet] wmap "J1743-0350_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.899 x 7.77 at -1.763 degrees (North through East) ! Clean map min=-0.0060129 max=2.2184 Jy/beam ! Writing clean map to FITS file: J1743-0350_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.21839 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000447819 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0605599 0.0605599 0.12112 0.24224 0.48448 0.968959 1.93792 3.87584 7.75167 15.5033 31.0067 62.0134 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.218 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.899 x 7.77 at -1.763 degrees (North through East) ! Clean map min=-0.0060129 max=2.2184 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1743-0350_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:04:31 2019