! Started logfile: J1743-0350_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:19:31 2019 obs J1743-0350_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1743-0350_S_2017_01_16_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.391667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1743-0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1743-0350_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.092697Jy sigma=0.006992 ! Fit after self-cal, rms=1.087274Jy sigma=0.006957 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.021 mas, bmaj=8.199 mas, bpa=-16 degrees ! Estimated noise=5676.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.62874 Jy ! Component: 100 - total flux cleaned = 1.98392 Jy ! Total flux subtracted in 100 components = 1.98392 Jy ! Clean residual min=-0.050646 max=0.099051 Jy/beam ! Clean residual mean=-0.000010 rms=0.017409 Jy/beam ! Combined flux in latest and established models = 1.98392 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1.98392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186706Jy sigma=0.001120 ! Fit after self-cal, rms=0.186705Jy sigma=0.001120 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.971 mas, bmaj=8.713 mas, bpa=5.765 degrees ! Estimated noise=4987.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.051742 Jy ! Component: 100 - total flux cleaned = 0.0446316 Jy ! Component: 150 - total flux cleaned = 0.040676 Jy ! Component: 200 - total flux cleaned = 0.0374973 Jy ! Total flux subtracted in 200 components = 0.0374973 Jy ! Clean residual min=-0.029426 max=0.035931 Jy/beam ! Clean residual mean=-0.000125 rms=0.009379 Jy/beam ! Combined flux in latest and established models = 2.02141 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 2.02141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157655Jy sigma=0.000973 ! Fit after self-cal, rms=0.157656Jy sigma=0.000973 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.97 KP 1.01 ! LA 1.00 MK 1.00* NL 0.91 OV 1.00* ! PT 0.99 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00 KP 0.98 ! LA 0.98 MK 1.00* NL 1.01 OV 1.00* ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00 KP 1.04 ! LA 1.00 MK 1.00* NL 1.00 OV 1.00* ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.96 KP 1.00* ! LA 1.11 MK 1.00* NL 1.00* OV 1.00* ! PT 1.00 SC 0.91 ! ! ! Fit before self-cal, rms=0.157656Jy sigma=0.000973 ! Fit after self-cal, rms=0.107759Jy sigma=0.000680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.97 mas, bmaj=8.671 mas, bpa=5.179 degrees ! Estimated noise=4978.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150346 Jy ! Component: 100 - total flux cleaned = 0.0200291 Jy ! Component: 150 - total flux cleaned = 0.02054 Jy ! Component: 200 - total flux cleaned = 0.0205389 Jy ! Total flux subtracted in 200 components = 0.0205389 Jy ! Clean residual min=-0.013865 max=0.015972 Jy/beam ! Clean residual mean=-0.000021 rms=0.004341 Jy/beam ! Combined flux in latest and established models = 2.04195 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 2.04195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105790Jy sigma=0.000667 ! Fit after self-cal, rms=0.105750Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105750Jy sigma=0.000666 ! Fit after self-cal, rms=0.105326Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.966 mas, bmaj=8.656 mas, bpa=4.775 degrees ! Estimated noise=4980.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00959664 Jy ! Component: 100 - total flux cleaned = 0.0125815 Jy ! Component: 150 - total flux cleaned = 0.0133063 Jy ! Component: 200 - total flux cleaned = 0.0134716 Jy ! Total flux subtracted in 200 components = 0.0134716 Jy ! Clean residual min=-0.012254 max=0.013179 Jy/beam ! Clean residual mean=-0.000010 rms=0.003706 Jy/beam ! Combined flux in latest and established models = 2.05542 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 2.05542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104494Jy sigma=0.000656 ! Fit after self-cal, rms=0.104504Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237828 Jy ! Component: 100 - total flux cleaned = 0.000365684 Jy ! Component: 150 - total flux cleaned = 0.00031714 Jy ! Component: 200 - total flux cleaned = 0.000223674 Jy ! Total flux subtracted in 200 components = 0.000223674 Jy ! Clean residual min=-0.012154 max=0.012940 Jy/beam ! Clean residual mean=-0.000011 rms=0.003673 Jy/beam ! Combined flux in latest and established models = 2.05565 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 2.05565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104427Jy sigma=0.000656 ! Fit after self-cal, rms=0.104434Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104434Jy sigma=0.000656 ! Fit after self-cal, rms=0.104313Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.963 mas, bmaj=8.646 mas, bpa=4.522 degrees ! Estimated noise=4981.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608857 Jy ! Component: 100 - total flux cleaned = 0.00859471 Jy ! Component: 150 - total flux cleaned = 0.00941481 Jy ! Component: 200 - total flux cleaned = 0.00970396 Jy ! Total flux subtracted in 200 components = 0.00970396 Jy ! Clean residual min=-0.011127 max=0.011437 Jy/beam ! Clean residual mean=-0.000004 rms=0.003358 Jy/beam ! Combined flux in latest and established models = 2.06535 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 47 components and 2.06535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103953Jy sigma=0.000651 ! Fit after self-cal, rms=0.103961Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.69571e-05 Jy ! Component: 100 - total flux cleaned = 1.9232e-05 Jy ! Component: 150 - total flux cleaned = 5.83623e-05 Jy ! Component: 200 - total flux cleaned = 9.46541e-05 Jy ! Total flux subtracted in 200 components = 9.46541e-05 Jy ! Clean residual min=-0.011083 max=0.011499 Jy/beam ! Clean residual mean=-0.000004 rms=0.003343 Jy/beam ! Combined flux in latest and established models = 2.06545 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 2.06545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103928Jy sigma=0.000651 ! Fit after self-cal, rms=0.103934Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103934Jy sigma=0.000651 ! Fit after self-cal, rms=0.103932Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.396 mas, bmaj=10.36 mas, bpa=-3.597 degrees ! Estimated noise=5495.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395331 Jy ! Component: 100 - total flux cleaned = 0.00558606 Jy ! Component: 150 - total flux cleaned = 0.00618103 Jy ! Component: 200 - total flux cleaned = 0.00626255 Jy ! Total flux subtracted in 200 components = 0.00626255 Jy ! Clean residual min=-0.010932 max=0.011428 Jy/beam ! Clean residual mean=0.000005 rms=0.003496 Jy/beam ! Combined flux in latest and established models = 2.07171 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 2.07171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103754Jy sigma=0.000649 ! Fit after self-cal, rms=0.103757Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.11357e-05 Jy ! Component: 100 - total flux cleaned = 5.79989e-06 Jy ! Component: 150 - total flux cleaned = 5.41456e-05 Jy ! Component: 200 - total flux cleaned = 9.74666e-05 Jy ! Total flux subtracted in 200 components = 9.74666e-05 Jy ! Clean residual min=-0.010978 max=0.011464 Jy/beam ! Clean residual mean=0.000005 rms=0.003484 Jy/beam ! Combined flux in latest and established models = 2.07181 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 2.07181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103742Jy sigma=0.000649 ! Fit after self-cal, rms=0.103745Jy sigma=0.000649 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.961 mas, bmaj=8.64 mas, bpa=4.33 degrees ! Estimated noise=4983.12 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.961 x 8.64 at 4.33 degrees (North through East) ! Clean map min=-0.010124 max=2.0689 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103745Jy sigma=0.000649 ! Fit after self-cal, rms=0.093271Jy sigma=0.000581 ! Inverting map and beam ! Estimated beam: bmin=6.961 mas, bmaj=8.637 mas, bpa=4.243 degrees ! Estimated noise=4984.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219734 Jy ! Component: 100 - total flux cleaned = 0.00279178 Jy ! Component: 150 - total flux cleaned = 0.00302556 Jy ! Component: 200 - total flux cleaned = 0.00310811 Jy ! Total flux subtracted in 200 components = 0.00310811 Jy ! Clean residual min=-0.010462 max=0.010734 Jy/beam ! Clean residual mean=0.000009 rms=0.003044 Jy/beam ! Combined flux in latest and established models = 2.07491 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 64 components and 2.07491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093180Jy sigma=0.000581 ! Fit after self-cal, rms=0.093184Jy sigma=0.000581 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.68386e-05 Jy ! Component: 100 - total flux cleaned = 0.000119339 Jy ! Component: 150 - total flux cleaned = 0.00015855 Jy ! Component: 200 - total flux cleaned = 0.00019566 Jy ! Total flux subtracted in 200 components = 0.00019566 Jy ! Clean residual min=-0.010333 max=0.010713 Jy/beam ! Clean residual mean=0.000008 rms=0.003026 Jy/beam ! Combined flux in latest and established models = 2.07511 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 2.07511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093156Jy sigma=0.000581 ! Fit after self-cal, rms=0.093160Jy sigma=0.000581 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093160Jy sigma=0.000581 ! Fit after self-cal, rms=0.093194Jy sigma=0.000581 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.016 mas, bmaj=8.153 mas, bpa=-16.49 degrees ! Estimated noise=5622.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.60911 Jy ! Component: 100 - total flux cleaned = 1.96005 Jy ! Component: 150 - total flux cleaned = 2.03724 Jy ! Component: 200 - total flux cleaned = 2.05788 Jy ! Total flux subtracted in 200 components = 2.05788 Jy ! Clean residual min=-0.019118 max=0.015757 Jy/beam ! Clean residual mean=0.000037 rms=0.004506 Jy/beam ! Combined flux in latest and established models = 2.05788 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 2.05788 Jy ! Inverting map and beam ! Estimated beam: bmin=6.961 mas, bmaj=8.636 mas, bpa=4.153 degrees ! Estimated noise=4985.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013121 Jy ! Component: 100 - total flux cleaned = 0.0197454 Jy ! Component: 150 - total flux cleaned = 0.0216065 Jy ! Component: 200 - total flux cleaned = 0.0221595 Jy ! Total flux subtracted in 200 components = 0.0221595 Jy ! Clean residual min=-0.011997 max=0.011132 Jy/beam ! Clean residual mean=-0.000001 rms=0.003327 Jy/beam ! Combined flux in latest and established models = 2.08004 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 43 components and 2.08004 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.392 mas, bmaj=10.36 mas, bpa=-3.772 degrees ! Estimated noise=5500.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000396839 Jy ! Component: 100 - total flux cleaned = -0.000386108 Jy ! Component: 150 - total flux cleaned = -0.000378135 Jy ! Component: 200 - total flux cleaned = -0.000546423 Jy ! Total flux subtracted in 200 components = -0.000546423 Jy ! Clean residual min=-0.011472 max=0.011069 Jy/beam ! Clean residual mean=0.000004 rms=0.003502 Jy/beam ! Combined flux in latest and established models = 2.07949 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.7846e-05 Jy ! Component: 100 - total flux cleaned = -7.40747e-05 Jy ! Component: 150 - total flux cleaned = -0.000150024 Jy ! Component: 200 - total flux cleaned = -0.000219529 Jy ! Total flux subtracted in 200 components = -0.000219529 Jy ! Clean residual min=-0.011072 max=0.010865 Jy/beam ! Clean residual mean=0.000006 rms=0.003454 Jy/beam ! Combined flux in latest and established models = 2.07927 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 62 components and 2.07928 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.961 mas, bmaj=8.636 mas, bpa=4.153 degrees ! Estimated noise=4985.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224501 Jy ! Component: 100 - total flux cleaned = 0.000413752 Jy ! Component: 150 - total flux cleaned = 0.000338093 Jy ! Component: 200 - total flux cleaned = 0.000338263 Jy ! Total flux subtracted in 200 components = 0.000338263 Jy ! Clean residual min=-0.010598 max=0.010649 Jy/beam ! Clean residual mean=0.000001 rms=0.003061 Jy/beam ! Combined flux in latest and established models = 2.07961 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 2.07961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093299Jy sigma=0.000582 ! Fit after self-cal, rms=0.093304Jy sigma=0.000582 wmodel J1743-0350_S_2017_01_16_pus_map.mod ! Writing 73 model components to file: J1743-0350_S_2017_01_16_pus_map.mod wobs J1743-0350_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1743-0350_S_2017_01_16_pus_uvs.fits wwins J1743-0350_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1743-0350_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153128 Jy ! Component: 100 - total flux cleaned = 0.00154137 Jy ! Component: 150 - total flux cleaned = 0.00153991 Jy ! Component: 200 - total flux cleaned = 0.00167847 Jy ! Component: 250 - total flux cleaned = 0.00193885 Jy ! Component: 300 - total flux cleaned = 0.002415 Jy ! Component: 350 - total flux cleaned = 0.00263237 Jy ! Component: 400 - total flux cleaned = 0.0026399 Jy ! Component: 450 - total flux cleaned = 0.00244835 Jy ! Component: 500 - total flux cleaned = 0.00208226 Jy ! Component: 550 - total flux cleaned = 0.00165539 Jy ! Component: 600 - total flux cleaned = 0.0016571 Jy ! Component: 650 - total flux cleaned = 0.00142886 Jy ! Component: 700 - total flux cleaned = 0.00121045 Jy ! Component: 750 - total flux cleaned = 0.00114109 Jy ! Component: 800 - total flux cleaned = 0.00100665 Jy ! Component: 850 - total flux cleaned = 0.000876579 Jy ! Component: 900 - total flux cleaned = 0.000688102 Jy ! Component: 950 - total flux cleaned = 0.000444465 Jy ! Component: 1000 - total flux cleaned = 0.000146547 Jy ! Component: 1050 - total flux cleaned = -0.00031748 Jy ! Component: 1100 - total flux cleaned = -0.000655285 Jy ! Component: 1150 - total flux cleaned = -0.000929917 Jy ! Component: 1200 - total flux cleaned = -0.00109048 Jy ! Component: 1250 - total flux cleaned = -0.00140796 Jy ! Component: 1300 - total flux cleaned = -0.00166705 Jy ! Component: 1350 - total flux cleaned = -0.00181999 Jy ! Component: 1400 - total flux cleaned = -0.00207105 Jy ! Component: 1450 - total flux cleaned = -0.00231745 Jy ! Component: 1500 - total flux cleaned = -0.00265733 Jy ! Component: 1550 - total flux cleaned = -0.00294521 Jy ! Component: 1600 - total flux cleaned = -0.00327645 Jy ! Component: 1650 - total flux cleaned = -0.00364911 Jy ! Component: 1700 - total flux cleaned = -0.00401616 Jy ! Component: 1750 - total flux cleaned = -0.00433421 Jy ! Component: 1800 - total flux cleaned = -0.00464869 Jy ! Component: 1850 - total flux cleaned = -0.00509289 Jy ! Component: 1900 - total flux cleaned = -0.00522433 Jy ! Component: 1950 - total flux cleaned = -0.0053552 Jy ! Component: 2000 - total flux cleaned = -0.00561439 Jy ! Component: 2050 - total flux cleaned = -0.00599985 Jy ! Component: 2100 - total flux cleaned = -0.00616996 Jy ! Component: 2150 - total flux cleaned = -0.0064663 Jy ! Component: 2200 - total flux cleaned = -0.00659243 Jy ! Component: 2250 - total flux cleaned = -0.00680186 Jy ! Component: 2300 - total flux cleaned = -0.00705208 Jy ! Component: 2350 - total flux cleaned = -0.00721833 Jy ! Component: 2400 - total flux cleaned = -0.00754889 Jy ! Component: 2450 - total flux cleaned = -0.00754886 Jy ! Component: 2500 - total flux cleaned = -0.00767251 Jy ! Component: 2550 - total flux cleaned = -0.00783754 Jy ! Component: 2600 - total flux cleaned = -0.00796117 Jy ! Component: 2650 - total flux cleaned = -0.0080439 Jy ! Component: 2700 - total flux cleaned = -0.00812624 Jy ! Component: 2750 - total flux cleaned = -0.00829114 Jy ! Component: 2800 - total flux cleaned = -0.00837386 Jy ! Component: 2850 - total flux cleaned = -0.00837417 Jy ! Component: 2900 - total flux cleaned = -0.00858083 Jy ! Component: 2950 - total flux cleaned = -0.00862261 Jy ! Component: 3000 - total flux cleaned = -0.00874708 Jy ! Component: 3050 - total flux cleaned = -0.00878853 Jy ! Component: 3100 - total flux cleaned = -0.00887173 Jy ! Component: 3150 - total flux cleaned = -0.00895553 Jy ! Component: 3200 - total flux cleaned = -0.00903901 Jy ! Component: 3250 - total flux cleaned = -0.00916503 Jy ! Component: 3300 - total flux cleaned = -0.00924915 Jy ! Component: 3350 - total flux cleaned = -0.00937552 Jy ! Component: 3400 - total flux cleaned = -0.00950235 Jy ! Component: 3450 - total flux cleaned = -0.00967276 Jy ! Component: 3500 - total flux cleaned = -0.00971527 Jy ! Component: 3550 - total flux cleaned = -0.0098867 Jy ! Component: 3600 - total flux cleaned = -0.00992948 Jy ! Component: 3650 - total flux cleaned = -0.0102325 Jy ! Component: 3700 - total flux cleaned = -0.0103633 Jy ! Component: 3750 - total flux cleaned = -0.0105384 Jy ! Component: 3800 - total flux cleaned = -0.0106712 Jy ! Component: 3850 - total flux cleaned = -0.0108488 Jy ! Component: 3900 - total flux cleaned = -0.0109831 Jy ! Component: 3950 - total flux cleaned = -0.0110732 Jy ! Component: 4000 - total flux cleaned = -0.0112094 Jy ! Component: 4050 - total flux cleaned = -0.0113468 Jy ! Total flux subtracted in 4096 components = -0.0115317 Jy ! Clean residual min=-0.002772 max=0.002941 Jy/beam ! Clean residual mean=0.000004 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 2.06808 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 358 components and 2.06808 Jy ![Exited script file: muppet] wmap "J1743-0350_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.961 x 8.636 at 4.153 degrees (North through East) ! Clean map min=-0.0055137 max=2.0654 Jy/beam ! Writing clean map to FITS file: J1743-0350_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.06544 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000773693 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.112377 0.112377 0.224754 0.449508 0.899016 1.79803 3.59606 7.19213 14.3843 28.7685 57.537 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.065 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.961 x 8.636 at 4.153 degrees (North through East) ! Clean map min=-0.0055137 max=2.0654 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1743-0350_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:19:36 2019