! Started logfile: J1743+2752_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:46:20 2019 obs J1743+2752_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1743+2752_S_2017_03_27_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.972068 visibilities/baseline/integration-bin. ! Found source: J1743+2752 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 25196 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1743+2752_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 443 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.874662Jy sigma=0.008165 ! Fit after self-cal, rms=0.863818Jy sigma=0.008072 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=5.736 mas, bpa=-2.337 degrees ! Estimated noise=1013.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106649 Jy ! Component: 100 - total flux cleaned = 0.131086 Jy ! Total flux subtracted in 100 components = 0.131086 Jy ! Clean residual min=-0.006642 max=0.009232 Jy/beam ! Clean residual mean=0.000028 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 0.131086 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.131086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091301Jy sigma=0.000819 ! Fit after self-cal, rms=0.091298Jy sigma=0.000819 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=6.739 mas, bpa=-2.072 degrees ! Estimated noise=520.138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138178 Jy ! Component: 100 - total flux cleaned = 0.0199984 Jy ! Component: 150 - total flux cleaned = 0.0234754 Jy ! Component: 200 - total flux cleaned = 0.0256693 Jy ! Total flux subtracted in 200 components = 0.0256693 Jy ! Clean residual min=-0.006779 max=0.008517 Jy/beam ! Clean residual mean=0.000073 rms=0.002274 Jy/beam ! Combined flux in latest and established models = 0.156755 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 34 components and 0.156755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089646Jy sigma=0.000798 ! Fit after self-cal, rms=0.089677Jy sigma=0.000798 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.03 KP 0.94 ! LA 1.04 MK 1.05 NL 1.02 OV 1.05 ! PT 0.97 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.97 KP 0.89 ! LA 0.97 MK 0.98 NL 1.05 OV 1.15 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HN 1.02 KP 0.88 ! LA 1.03 MK 1.02 NL 1.12 OV 1.00 ! PT 0.85 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.00 KP 1.00* ! LA 0.96 MK 1.14 NL 1.00* OV 1.20 ! PT 0.94 SC 1.50 ! ! ! Fit before self-cal, rms=0.089677Jy sigma=0.000798 ! Fit after self-cal, rms=0.092017Jy sigma=0.000787 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.535 mas, bmaj=6.794 mas, bpa=-1.692 degrees ! Estimated noise=516.356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000649322 Jy ! Component: 100 - total flux cleaned = -0.000729722 Jy ! Component: 150 - total flux cleaned = -0.000713885 Jy ! Component: 200 - total flux cleaned = -0.000714554 Jy ! Total flux subtracted in 200 components = -0.000714554 Jy ! Clean residual min=-0.006612 max=0.007632 Jy/beam ! Clean residual mean=0.000063 rms=0.002153 Jy/beam ! Combined flux in latest and established models = 0.156041 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.156041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092004Jy sigma=0.000787 ! Fit after self-cal, rms=0.092164Jy sigma=0.000786 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092164Jy sigma=0.000786 ! Fit after self-cal, rms=0.097394Jy sigma=0.000758 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=6.813 mas, bpa=-1.457 degrees ! Estimated noise=518.381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128443 Jy ! Component: 100 - total flux cleaned = -0.000281685 Jy ! Component: 150 - total flux cleaned = -0.000308529 Jy ! Component: 200 - total flux cleaned = -0.000329821 Jy ! Total flux subtracted in 200 components = -0.000329821 Jy ! Clean residual min=-0.005839 max=0.008043 Jy/beam ! Clean residual mean=0.000027 rms=0.001828 Jy/beam ! Combined flux in latest and established models = 0.155711 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 59 components and 0.155711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097364Jy sigma=0.000758 ! Fit after self-cal, rms=0.097561Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.5, 16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00681293 Jy ! Component: 100 - total flux cleaned = 0.00909662 Jy ! Component: 150 - total flux cleaned = 0.00999878 Jy ! Component: 200 - total flux cleaned = 0.0109069 Jy ! Total flux subtracted in 200 components = 0.0109069 Jy ! Clean residual min=-0.005827 max=0.007695 Jy/beam ! Clean residual mean=0.000016 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 0.166618 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 80 components and 0.166618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097151Jy sigma=0.000751 ! Fit after self-cal, rms=0.097076Jy sigma=0.000751 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097076Jy sigma=0.000751 ! Fit after self-cal, rms=0.098479Jy sigma=0.000750 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.564 mas, bmaj=6.839 mas, bpa=-1.42 degrees ! Estimated noise=518.276 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254539 Jy ! Component: 100 - total flux cleaned = 0.00312995 Jy ! Component: 150 - total flux cleaned = 0.00336287 Jy ! Component: 200 - total flux cleaned = 0.00336149 Jy ! Total flux subtracted in 200 components = 0.00336149 Jy ! Clean residual min=-0.005823 max=0.007385 Jy/beam ! Clean residual mean=0.000015 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 0.169979 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 99 components and 0.169979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098382Jy sigma=0.000749 ! Fit after self-cal, rms=0.098396Jy sigma=0.000749 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285066 Jy ! Component: 100 - total flux cleaned = 0.000331129 Jy ! Component: 150 - total flux cleaned = 0.000491889 Jy ! Component: 200 - total flux cleaned = 0.000565649 Jy ! Total flux subtracted in 200 components = 0.000565649 Jy ! Clean residual min=-0.005770 max=0.007289 Jy/beam ! Clean residual mean=0.000014 rms=0.001727 Jy/beam ! Combined flux in latest and established models = 0.170545 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 110 components and 0.170545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098359Jy sigma=0.000748 ! Fit after self-cal, rms=0.098351Jy sigma=0.000748 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098351Jy sigma=0.000748 ! Fit after self-cal, rms=0.098764Jy sigma=0.000748 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.795 mas, bmaj=10.26 mas, bpa=2.646 degrees ! Estimated noise=606.521 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000275589 Jy ! Component: 100 - total flux cleaned = -0.000147316 Jy ! Component: 150 - total flux cleaned = 0.000143344 Jy ! Component: 200 - total flux cleaned = 0.000399246 Jy ! Total flux subtracted in 200 components = 0.000399246 Jy ! Clean residual min=-0.009602 max=0.010782 Jy/beam ! Clean residual mean=0.000031 rms=0.003066 Jy/beam ! Combined flux in latest and established models = 0.170944 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 121 components and 0.170944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098757Jy sigma=0.000748 ! Fit after self-cal, rms=0.098762Jy sigma=0.000748 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000197977 Jy ! Component: 100 - total flux cleaned = -6.58846e-06 Jy ! Component: 150 - total flux cleaned = 0.000122483 Jy ! Component: 200 - total flux cleaned = 0.000239941 Jy ! Total flux subtracted in 200 components = 0.000239941 Jy ! Clean residual min=-0.009529 max=0.010796 Jy/beam ! Clean residual mean=0.000030 rms=0.003061 Jy/beam ! Combined flux in latest and established models = 0.171184 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 127 components and 0.171184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098771Jy sigma=0.000748 ! Fit after self-cal, rms=0.098766Jy sigma=0.000748 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.574 mas, bmaj=6.841 mas, bpa=-1.453 degrees ! Estimated noise=518.301 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.574 x 6.841 at -1.453 degrees (North through East) ! Clean map min=-0.0055725 max=0.14095 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=5.819 mas, bpa=-1.827 degrees ! Estimated noise=1026.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107574 Jy ! Component: 100 - total flux cleaned = 0.131885 Jy ! Component: 150 - total flux cleaned = 0.142648 Jy ! Component: 200 - total flux cleaned = 0.149995 Jy ! Total flux subtracted in 200 components = 0.149995 Jy ! Clean residual min=-0.005890 max=0.007075 Jy/beam ! Clean residual mean=0.000015 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.149995 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.149995 Jy ! Inverting map and beam ! Estimated beam: bmin=3.574 mas, bmaj=6.841 mas, bpa=-1.453 degrees ! Estimated noise=518.301 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00689507 Jy ! Component: 100 - total flux cleaned = 0.0104231 Jy ! Component: 150 - total flux cleaned = 0.0125122 Jy ! Component: 200 - total flux cleaned = 0.0141938 Jy ! Total flux subtracted in 200 components = 0.0141938 Jy ! Clean residual min=-0.006239 max=0.007360 Jy/beam ! Clean residual mean=0.000017 rms=0.001751 Jy/beam ! Combined flux in latest and established models = 0.164189 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 39 components and 0.164189 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.795 mas, bmaj=10.26 mas, bpa=2.646 degrees ! Estimated noise=606.521 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187317 Jy ! Component: 100 - total flux cleaned = 0.00317365 Jy ! Component: 150 - total flux cleaned = 0.00423593 Jy ! Component: 200 - total flux cleaned = 0.0049122 Jy ! Total flux subtracted in 200 components = 0.0049122 Jy ! Clean residual min=-0.009749 max=0.010951 Jy/beam ! Clean residual mean=0.000032 rms=0.003077 Jy/beam ! Combined flux in latest and established models = 0.169101 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00045555 Jy ! Component: 100 - total flux cleaned = 0.000745684 Jy ! Component: 150 - total flux cleaned = 0.000903399 Jy ! Component: 200 - total flux cleaned = 0.00109664 Jy ! Total flux subtracted in 200 components = 0.00109664 Jy ! Clean residual min=-0.009604 max=0.010851 Jy/beam ! Clean residual mean=0.000030 rms=0.003064 Jy/beam ! Combined flux in latest and established models = 0.170198 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 65 components and 0.170198 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.574 mas, bmaj=6.841 mas, bpa=-1.453 degrees ! Estimated noise=518.301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331102 Jy ! Component: 100 - total flux cleaned = 0.000382019 Jy ! Component: 150 - total flux cleaned = 0.000474712 Jy ! Component: 200 - total flux cleaned = 0.000604075 Jy ! Total flux subtracted in 200 components = 0.000604075 Jy ! Clean residual min=-0.005764 max=0.007186 Jy/beam ! Clean residual mean=0.000014 rms=0.001713 Jy/beam ! Combined flux in latest and established models = 0.170802 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 90 components and 0.170802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098758Jy sigma=0.000748 ! Fit after self-cal, rms=0.098744Jy sigma=0.000748 wmodel J1743+2752_S_2017_03_27_pus_map.mod ! Writing 90 model components to file: J1743+2752_S_2017_03_27_pus_map.mod wobs J1743+2752_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1743+2752_S_2017_03_27_pus_uvs.fits wwins J1743+2752_S_2017_03_27_pus_map.win ! wwins: Wrote 2 windows to J1743+2752_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032532 Jy ! Component: 100 - total flux cleaned = 0.00565745 Jy ! Component: 150 - total flux cleaned = 0.00715349 Jy ! Component: 200 - total flux cleaned = 0.00847437 Jy ! Component: 250 - total flux cleaned = 0.00954329 Jy ! Component: 300 - total flux cleaned = 0.0105685 Jy ! Component: 350 - total flux cleaned = 0.0117396 Jy ! Component: 400 - total flux cleaned = 0.0128732 Jy ! Component: 450 - total flux cleaned = 0.0137221 Jy ! Component: 500 - total flux cleaned = 0.0147951 Jy ! Component: 550 - total flux cleaned = 0.0157592 Jy ! Component: 600 - total flux cleaned = 0.0165414 Jy ! Component: 650 - total flux cleaned = 0.0174599 Jy ! Component: 700 - total flux cleaned = 0.0184318 Jy ! Component: 750 - total flux cleaned = 0.0191652 Jy ! Component: 800 - total flux cleaned = 0.0199563 Jy ! Component: 850 - total flux cleaned = 0.020662 Jy ! Component: 900 - total flux cleaned = 0.0211467 Jy ! Component: 950 - total flux cleaned = 0.0219615 Jy ! Component: 1000 - total flux cleaned = 0.0224943 Jy ! Component: 1050 - total flux cleaned = 0.0228882 Jy ! Component: 1100 - total flux cleaned = 0.0233408 Jy ! Component: 1150 - total flux cleaned = 0.023659 Jy ! Component: 1200 - total flux cleaned = 0.0240344 Jy ! Component: 1250 - total flux cleaned = 0.0245893 Jy ! Component: 1300 - total flux cleaned = 0.0250151 Jy ! Component: 1350 - total flux cleaned = 0.0253153 Jy ! Component: 1400 - total flux cleaned = 0.0259049 Jy ! Component: 1450 - total flux cleaned = 0.02637 Jy ! Component: 1500 - total flux cleaned = 0.0267715 Jy ! Component: 1550 - total flux cleaned = 0.027394 Jy ! Component: 1600 - total flux cleaned = 0.0276171 Jy ! Component: 1650 - total flux cleaned = 0.0281134 Jy ! Component: 1700 - total flux cleaned = 0.0283315 Jy ! Component: 1750 - total flux cleaned = 0.0286009 Jy ! Component: 1800 - total flux cleaned = 0.0289738 Jy ! Component: 1850 - total flux cleaned = 0.0294468 Jy ! Component: 1900 - total flux cleaned = 0.0297059 Jy ! Component: 1950 - total flux cleaned = 0.0301685 Jy ! Component: 2000 - total flux cleaned = 0.0304225 Jy ! Component: 2050 - total flux cleaned = 0.0309241 Jy ! Component: 2100 - total flux cleaned = 0.0311728 Jy ! Component: 2150 - total flux cleaned = 0.0315166 Jy ! Component: 2200 - total flux cleaned = 0.031711 Jy ! Component: 2250 - total flux cleaned = 0.0320486 Jy ! Component: 2300 - total flux cleaned = 0.03243 Jy ! Component: 2350 - total flux cleaned = 0.0325715 Jy ! Component: 2400 - total flux cleaned = 0.0329445 Jy ! Component: 2450 - total flux cleaned = 0.0331294 Jy ! Component: 2500 - total flux cleaned = 0.0332671 Jy ! Component: 2550 - total flux cleaned = 0.0335836 Jy ! Component: 2600 - total flux cleaned = 0.0338074 Jy ! Component: 2650 - total flux cleaned = 0.0339851 Jy ! Component: 2700 - total flux cleaned = 0.0341618 Jy ! Component: 2750 - total flux cleaned = 0.0345545 Jy ! Component: 2800 - total flux cleaned = 0.0346845 Jy ! Component: 2850 - total flux cleaned = 0.0351125 Jy ! Component: 2900 - total flux cleaned = 0.0352821 Jy ! Component: 2950 - total flux cleaned = 0.035618 Jy ! Component: 3000 - total flux cleaned = 0.0357435 Jy ! Component: 3050 - total flux cleaned = 0.0359913 Jy ! Component: 3100 - total flux cleaned = 0.0362368 Jy ! Component: 3150 - total flux cleaned = 0.036399 Jy ! Component: 3200 - total flux cleaned = 0.0365601 Jy ! Component: 3250 - total flux cleaned = 0.0366397 Jy ! Component: 3300 - total flux cleaned = 0.0368769 Jy ! Component: 3350 - total flux cleaned = 0.0371512 Jy ! Component: 3400 - total flux cleaned = 0.0372298 Jy ! Component: 3450 - total flux cleaned = 0.0375001 Jy ! Component: 3500 - total flux cleaned = 0.037653 Jy ! Component: 3550 - total flux cleaned = 0.037805 Jy ! Component: 3600 - total flux cleaned = 0.0380315 Jy ! Component: 3650 - total flux cleaned = 0.0381059 Jy ! Component: 3700 - total flux cleaned = 0.0384405 Jy ! Component: 3750 - total flux cleaned = 0.0384777 Jy ! Component: 3800 - total flux cleaned = 0.0386606 Jy ! Component: 3850 - total flux cleaned = 0.0386974 Jy ! Component: 3900 - total flux cleaned = 0.0390584 Jy ! Component: 3950 - total flux cleaned = 0.0392375 Jy ! Component: 4000 - total flux cleaned = 0.0393797 Jy ! Component: 4050 - total flux cleaned = 0.0395918 Jy ! Total flux subtracted in 4096 components = 0.0396622 Jy ! Clean residual min=-0.001806 max=0.001957 Jy/beam ! Clean residual mean=0.000008 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.210464 Jy keep ! Adding 448 model components to the UV plane model. ! The established model now contains 538 components and 0.210464 Jy ![Exited script file: muppet] wmap "J1743+2752_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.574 x 6.841 at -1.453 degrees (North through East) ! Clean map min=-0.0039108 max=0.14079 Jy/beam ! Writing clean map to FITS file: J1743+2752_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.14079 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000742184 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.58147 1.58147 3.16295 6.32589 12.6518 25.3036 50.6072 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.14 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.574 x 6.841 at -1.453 degrees (North through East) ! Clean map min=-0.0039108 max=0.14079 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1743+2752_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:46:25 2019