! Started logfile: J1743+1935_S_2017_04_28_pus_uvs.log on Thu May 2 16:30:39 2019 obs J1743+1935_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1743+1935_S_2017_04_28_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.847421 visibilities/baseline/integration-bin. ! Found source: J1743+1935 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 17084 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1743+1935_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 542 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.876792Jy sigma=0.026670 ! Fit after self-cal, rms=0.871745Jy sigma=0.026648 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=6.788 mas, bpa=-15.3 degrees ! Estimated noise=816.744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0827231 Jy ! Component: 100 - total flux cleaned = 0.104953 Jy ! Total flux subtracted in 100 components = 0.104953 Jy ! Clean residual min=-0.016729 max=0.016431 Jy/beam ! Clean residual mean=0.000054 rms=0.005196 Jy/beam ! Combined flux in latest and established models = 0.104953 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.104953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100170Jy sigma=0.002649 ! Fit after self-cal, rms=0.100121Jy sigma=0.002647 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.706 mas, bmaj=7.31 mas, bpa=-12.59 degrees ! Estimated noise=571.088 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134858 Jy ! Component: 100 - total flux cleaned = 0.0153203 Jy ! Component: 150 - total flux cleaned = 0.0152987 Jy ! Component: 200 - total flux cleaned = 0.0147637 Jy ! Total flux subtracted in 200 components = 0.0147637 Jy ! Clean residual min=-0.016762 max=0.017024 Jy/beam ! Clean residual mean=0.000196 rms=0.005235 Jy/beam ! Combined flux in latest and established models = 0.119717 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 20 components and 0.119717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095537Jy sigma=0.002965 ! Fit after self-cal, rms=0.095520Jy sigma=0.002965 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.93 HN 0.99 KP 0.88 ! LA 0.89 MK 0.93 NL 0.86 OV 0.91 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.83 HN 1.05 KP 0.86 ! LA 0.85 MK 0.93 NL 1.03 OV 0.93 ! PT 0.91 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.86 HN 1.01 KP 0.90 ! LA 0.86 MK 0.95 NL 0.99 OV 0.86 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.87 HN 0.99 KP 1.00* ! LA 55.78 MK 1.45 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.095520Jy sigma=0.002965 ! Fit after self-cal, rms=3.311348Jy sigma=0.000697 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.698 mas, bmaj=7.234 mas, bpa=-10.27 degrees ! Estimated noise=576.084 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00595317 Jy ! Component: 100 - total flux cleaned = 0.00893308 Jy ! Component: 150 - total flux cleaned = 0.0108564 Jy ! Component: 200 - total flux cleaned = 0.011535 Jy ! Total flux subtracted in 200 components = 0.011535 Jy ! Clean residual min=-0.003217 max=0.003105 Jy/beam ! Clean residual mean=-0.000006 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.131252 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 44 components and 0.131252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.310801Jy sigma=0.000694 ! Fit after self-cal, rms=3.311293Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.311293Jy sigma=0.000688 ! Fit after self-cal, rms=4.521325Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.667 mas, bmaj=7.16 mas, bpa=-10.67 degrees ! Estimated noise=578.827 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328364 Jy ! Component: 100 - total flux cleaned = 0.00478689 Jy ! Component: 150 - total flux cleaned = 0.00587562 Jy ! Component: 200 - total flux cleaned = 0.00645766 Jy ! Total flux subtracted in 200 components = 0.00645766 Jy ! Clean residual min=-0.002346 max=0.002863 Jy/beam ! Clean residual mean=0.000005 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.13771 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 60 components and 0.13771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.521053Jy sigma=0.000674 ! Fit after self-cal, rms=4.521040Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-113.5, 78). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240011 Jy ! Component: 100 - total flux cleaned = 0.00350509 Jy ! Component: 150 - total flux cleaned = 0.00426086 Jy ! Component: 200 - total flux cleaned = 0.00468485 Jy ! Total flux subtracted in 200 components = 0.00468485 Jy ! Clean residual min=-0.002312 max=0.002199 Jy/beam ! Clean residual mean=0.000004 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.142395 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 87 components and 0.142395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.520848Jy sigma=0.000673 ! Fit after self-cal, rms=4.520849Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.520849Jy sigma=0.000673 ! Fit after self-cal, rms=3.800854Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.642 mas, bmaj=7.136 mas, bpa=-10.79 degrees ! Estimated noise=579.072 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113221 Jy ! Component: 100 - total flux cleaned = 0.00136884 Jy ! Component: 150 - total flux cleaned = 0.00156939 Jy ! Component: 200 - total flux cleaned = 0.00167312 Jy ! Total flux subtracted in 200 components = 0.00167312 Jy ! Clean residual min=-0.001764 max=0.001877 Jy/beam ! Clean residual mean=-0.000011 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.144068 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 106 components and 0.144068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.800791Jy sigma=0.000664 ! Fit after self-cal, rms=3.800781Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000294891 Jy ! Component: 100 - total flux cleaned = 0.00034254 Jy ! Component: 150 - total flux cleaned = 0.000386916 Jy ! Component: 200 - total flux cleaned = 0.000386869 Jy ! Total flux subtracted in 200 components = 0.000386869 Jy ! Clean residual min=-0.001723 max=0.001860 Jy/beam ! Clean residual mean=-0.000010 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.144455 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 116 components and 0.144455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.800764Jy sigma=0.000664 ! Fit after self-cal, rms=3.800761Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.800761Jy sigma=0.000664 ! Fit after self-cal, rms=3.840435Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.631 mas, bmaj=9.976 mas, bpa=-3.23 degrees ! Estimated noise=698.787 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124226 Jy ! Component: 100 - total flux cleaned = 0.00180507 Jy ! Component: 150 - total flux cleaned = 0.00193193 Jy ! Component: 200 - total flux cleaned = 0.00207087 Jy ! Total flux subtracted in 200 components = 0.00207087 Jy ! Clean residual min=-0.001857 max=0.002568 Jy/beam ! Clean residual mean=-0.000022 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.146526 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 145 components and 0.146526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.840384Jy sigma=0.000664 ! Fit after self-cal, rms=3.840382Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (29, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255488 Jy ! Component: 100 - total flux cleaned = 0.00387941 Jy ! Component: 150 - total flux cleaned = 0.00452077 Jy ! Component: 200 - total flux cleaned = 0.00491833 Jy ! Total flux subtracted in 200 components = 0.00491833 Jy ! Clean residual min=-0.001641 max=0.001991 Jy/beam ! Clean residual mean=-0.000018 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.151444 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 200 components and 0.151444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.840340Jy sigma=0.000663 ! Fit after self-cal, rms=3.840343Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.626 mas, bmaj=7.122 mas, bpa=-10.79 degrees ! Estimated noise=580.775 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.626 x 7.122 at -10.79 degrees (North through East) ! Clean map min=-0.0014824 max=0.11329 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=6.574 mas, bpa=-13.26 degrees ! Estimated noise=842.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0854587 Jy ! Component: 100 - total flux cleaned = 0.109949 Jy ! Component: 150 - total flux cleaned = 0.121787 Jy ! Component: 200 - total flux cleaned = 0.128833 Jy ! Total flux subtracted in 200 components = 0.128833 Jy ! Clean residual min=-0.003406 max=0.003615 Jy/beam ! Clean residual mean=-0.000014 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.128833 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.128833 Jy ! Inverting map and beam ! Estimated beam: bmin=3.626 mas, bmaj=7.122 mas, bpa=-10.79 degrees ! Estimated noise=580.775 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00569297 Jy ! Component: 100 - total flux cleaned = 0.00905417 Jy ! Component: 150 - total flux cleaned = 0.0115744 Jy ! Component: 200 - total flux cleaned = 0.0136551 Jy ! Total flux subtracted in 200 components = 0.0136551 Jy ! Clean residual min=-0.002103 max=0.001806 Jy/beam ! Clean residual mean=-0.000011 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.142488 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 56 components and 0.142488 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.631 mas, bmaj=9.976 mas, bpa=-3.23 degrees ! Estimated noise=698.787 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025289 Jy ! Component: 100 - total flux cleaned = 0.00440359 Jy ! Component: 150 - total flux cleaned = 0.00574004 Jy ! Component: 200 - total flux cleaned = 0.00671367 Jy ! Total flux subtracted in 200 components = 0.00671367 Jy ! Clean residual min=-0.001797 max=0.002078 Jy/beam ! Clean residual mean=-0.000018 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.149202 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848075 Jy ! Component: 100 - total flux cleaned = 0.00139993 Jy ! Component: 150 - total flux cleaned = 0.00189551 Jy ! Component: 200 - total flux cleaned = 0.00240504 Jy ! Total flux subtracted in 200 components = 0.00240504 Jy ! Clean residual min=-0.001800 max=0.002049 Jy/beam ! Clean residual mean=-0.000018 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.151607 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 132 components and 0.151607 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.626 mas, bmaj=7.122 mas, bpa=-10.79 degrees ! Estimated noise=580.775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000186484 Jy ! Component: 100 - total flux cleaned = 0.000132673 Jy ! Component: 150 - total flux cleaned = 0.000469367 Jy ! Component: 200 - total flux cleaned = 0.000588916 Jy ! Total flux subtracted in 200 components = 0.000588916 Jy ! Clean residual min=-0.001599 max=0.001610 Jy/beam ! Clean residual mean=-0.000009 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.152196 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 156 components and 0.152196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.840332Jy sigma=0.000663 ! Fit after self-cal, rms=3.840342Jy sigma=0.000663 wmodel J1743+1935_S_2017_04_28_pus_map.mod ! Writing 156 model components to file: J1743+1935_S_2017_04_28_pus_map.mod wobs J1743+1935_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1743+1935_S_2017_04_28_pus_uvs.fits wwins J1743+1935_S_2017_04_28_pus_map.win ! wwins: Wrote 4 windows to J1743+1935_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.56936e-05 Jy ! Component: 100 - total flux cleaned = -8.03202e-05 Jy ! Component: 150 - total flux cleaned = -5.39644e-05 Jy ! Component: 200 - total flux cleaned = -3.48677e-06 Jy ! Component: 250 - total flux cleaned = 2.09146e-05 Jy ! Component: 300 - total flux cleaned = 4.41472e-05 Jy ! Component: 350 - total flux cleaned = 4.36977e-05 Jy ! Component: 400 - total flux cleaned = 0.000111236 Jy ! Component: 450 - total flux cleaned = 0.000155404 Jy ! Component: 500 - total flux cleaned = 0.000241662 Jy ! Component: 550 - total flux cleaned = 0.000283769 Jy ! Component: 600 - total flux cleaned = 0.000345396 Jy ! Component: 650 - total flux cleaned = 0.000304122 Jy ! Component: 700 - total flux cleaned = 0.000323975 Jy ! Component: 750 - total flux cleaned = 0.000343761 Jy ! Component: 800 - total flux cleaned = 0.000382888 Jy ! Component: 850 - total flux cleaned = 0.000440432 Jy ! Component: 900 - total flux cleaned = 0.000459679 Jy ! Component: 950 - total flux cleaned = 0.000497314 Jy ! Component: 1000 - total flux cleaned = 0.000552709 Jy ! Component: 1050 - total flux cleaned = 0.000516109 Jy ! Component: 1100 - total flux cleaned = 0.000516027 Jy ! Component: 1150 - total flux cleaned = 0.000462578 Jy ! Component: 1200 - total flux cleaned = 0.000497727 Jy ! Component: 1250 - total flux cleaned = 0.000445238 Jy ! Component: 1300 - total flux cleaned = 0.000393643 Jy ! Component: 1350 - total flux cleaned = 0.000376545 Jy ! Component: 1400 - total flux cleaned = 0.000359537 Jy ! Component: 1450 - total flux cleaned = 0.000275831 Jy ! Component: 1500 - total flux cleaned = 0.00024257 Jy ! Component: 1550 - total flux cleaned = 0.000242582 Jy ! Component: 1600 - total flux cleaned = 0.000226054 Jy ! Component: 1650 - total flux cleaned = 0.000209861 Jy ! Component: 1700 - total flux cleaned = 0.000162064 Jy ! Component: 1750 - total flux cleaned = 0.000146241 Jy ! Component: 1800 - total flux cleaned = 9.92713e-05 Jy ! Component: 1850 - total flux cleaned = 6.84048e-05 Jy ! Component: 1900 - total flux cleaned = 5.30407e-05 Jy ! Component: 1950 - total flux cleaned = 5.28965e-05 Jy ! Component: 2000 - total flux cleaned = -2.2571e-05 Jy ! Component: 2050 - total flux cleaned = 7.27654e-06 Jy ! Component: 2100 - total flux cleaned = -0.000111459 Jy ! Component: 2150 - total flux cleaned = -0.000140703 Jy ! Component: 2200 - total flux cleaned = -0.000140645 Jy ! Component: 2250 - total flux cleaned = -0.000198525 Jy ! Component: 2300 - total flux cleaned = -0.000169715 Jy ! Component: 2350 - total flux cleaned = -0.000241194 Jy ! Component: 2400 - total flux cleaned = -0.000325957 Jy ! Component: 2450 - total flux cleaned = -0.000340053 Jy ! Component: 2500 - total flux cleaned = -0.000409728 Jy ! Component: 2550 - total flux cleaned = -0.000368151 Jy ! Component: 2600 - total flux cleaned = -0.000368101 Jy ! Component: 2650 - total flux cleaned = -0.000368172 Jy ! Component: 2700 - total flux cleaned = -0.000408914 Jy ! Component: 2750 - total flux cleaned = -0.000382059 Jy ! Component: 2800 - total flux cleaned = -0.000435651 Jy ! Component: 2850 - total flux cleaned = -0.000462235 Jy ! Component: 2900 - total flux cleaned = -0.000396457 Jy ! Component: 2950 - total flux cleaned = -0.000448954 Jy ! Component: 3000 - total flux cleaned = -0.000461925 Jy ! Component: 3050 - total flux cleaned = -0.000474728 Jy ! Component: 3100 - total flux cleaned = -0.000487376 Jy ! Component: 3150 - total flux cleaned = -0.000398097 Jy ! Component: 3200 - total flux cleaned = -0.000410978 Jy ! Component: 3250 - total flux cleaned = -0.000385939 Jy ! Component: 3300 - total flux cleaned = -0.000360958 Jy ! Component: 3350 - total flux cleaned = -0.000360991 Jy ! Component: 3400 - total flux cleaned = -0.000323907 Jy ! Component: 3450 - total flux cleaned = -0.000336295 Jy ! Component: 3500 - total flux cleaned = -0.000336415 Jy ! Component: 3550 - total flux cleaned = -0.000312214 Jy ! Component: 3600 - total flux cleaned = -0.000336424 Jy ! Component: 3650 - total flux cleaned = -0.00033642 Jy ! Component: 3700 - total flux cleaned = -0.000288788 Jy ! Component: 3750 - total flux cleaned = -0.000324464 Jy ! Component: 3800 - total flux cleaned = -0.000336232 Jy ! Component: 3850 - total flux cleaned = -0.000289254 Jy ! Component: 3900 - total flux cleaned = -0.000265832 Jy ! Component: 3950 - total flux cleaned = -0.000242686 Jy ! Component: 4000 - total flux cleaned = -0.000254195 Jy ! Component: 4050 - total flux cleaned = -0.00023121 Jy ! Total flux subtracted in 4096 components = -0.000196937 Jy ! Clean residual min=-0.000695 max=0.000648 Jy/beam ! Clean residual mean=-0.000003 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.151999 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 453 components and 0.151999 Jy ![Exited script file: muppet] wmap "J1743+1935_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.626 x 7.122 at -10.79 degrees (North through East) ! Clean map min=-0.0012917 max=0.11332 Jy/beam ! Writing clean map to FITS file: J1743+1935_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113325 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000213532 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.565275 0.565275 1.13055 2.2611 4.5222 9.0444 18.0888 36.1776 72.3552 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.626 x 7.122 at -10.79 degrees (North through East) ! Clean map min=-0.0012917 max=0.11332 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1743+1935_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:30:44 2019