! Started logfile: J1742-3341_S_2017_10_09_pus_uvs.log on Sun May 12 13:17:01 2019 obs J1742-3341_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1742-3341_S_2017_10_09_pus_uva.fits ! AN table 1: 235 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.414066 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1742-3341 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 14012 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1742-3341_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 752 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 825 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 812 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1699 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.989352Jy sigma=0.006511 ! Fit after self-cal, rms=0.938342Jy sigma=0.006168 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=14.83 mas, bpa=-18.26 degrees ! Estimated noise=1760.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0473517 Jy ! Component: 100 - total flux cleaned = 0.0586548 Jy ! Total flux subtracted in 100 components = 0.0586548 Jy ! Clean residual min=-0.004876 max=0.005175 Jy/beam ! Clean residual mean=-0.000063 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.0586548 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0586548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100120Jy sigma=0.000607 ! Fit after self-cal, rms=0.099107Jy sigma=0.000601 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=18.9 mas, bpa=-17.38 degrees ! Estimated noise=1075.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00946352 Jy ! Component: 100 - total flux cleaned = 0.0138353 Jy ! Component: 150 - total flux cleaned = 0.0161894 Jy ! Component: 200 - total flux cleaned = 0.0174942 Jy ! Total flux subtracted in 200 components = 0.0174942 Jy ! Clean residual min=-0.004100 max=0.003417 Jy/beam ! Clean residual mean=-0.000131 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.076149 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 64 components and 0.076149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098164Jy sigma=0.000596 ! Fit after self-cal, rms=0.098044Jy sigma=0.000595 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.03 HN 1.10 KP 1.10 ! LA 0.97 MK 1.01 NL 0.92 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.02 HN 1.18 KP 1.07 ! LA 0.92 MK 1.08 NL 1.01 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.05 HN 1.00 KP 0.89 ! LA 0.78 MK 1.20 NL 1.10 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 4. ! A total of 180 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.86 KP 1.00* ! LA 1.00* MK 0.93 NL 1.00* OV 1.00* ! PT 0.95 ! ! ! Fit before self-cal, rms=0.098044Jy sigma=0.000595 ! Fit after self-cal, rms=0.097212Jy sigma=0.000595 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.766 mas, bmaj=19.1 mas, bpa=-17.67 degrees ! Estimated noise=1097.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.91256e-05 Jy ! Component: 100 - total flux cleaned = -5.21897e-05 Jy ! Component: 150 - total flux cleaned = -3.03448e-05 Jy ! Component: 200 - total flux cleaned = -1.05242e-05 Jy ! Total flux subtracted in 200 components = -1.05242e-05 Jy ! Clean residual min=-0.002930 max=0.003153 Jy/beam ! Clean residual mean=-0.000070 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.0761385 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.0761385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097195Jy sigma=0.000595 ! Fit after self-cal, rms=0.097046Jy sigma=0.000594 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097046Jy sigma=0.000594 ! Fit after self-cal, rms=0.097365Jy sigma=0.000593 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=19.25 mas, bpa=-17.62 degrees ! Estimated noise=1099.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.04044e-05 Jy ! Component: 100 - total flux cleaned = -4.52293e-05 Jy ! Component: 150 - total flux cleaned = -2.2231e-05 Jy ! Component: 200 - total flux cleaned = -2.68563e-06 Jy ! Total flux subtracted in 200 components = -2.68563e-06 Jy ! Clean residual min=-0.002702 max=0.002884 Jy/beam ! Clean residual mean=-0.000057 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.0761358 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 88 components and 0.0761358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097353Jy sigma=0.000593 ! Fit after self-cal, rms=0.097381Jy sigma=0.000593 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110988 Jy ! Component: 100 - total flux cleaned = 0.000129856 Jy ! Component: 150 - total flux cleaned = 0.000147195 Jy ! Component: 200 - total flux cleaned = 0.000162087 Jy ! Total flux subtracted in 200 components = 0.000162087 Jy ! Clean residual min=-0.002651 max=0.002834 Jy/beam ! Clean residual mean=-0.000064 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.0762979 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 99 components and 0.0762979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097373Jy sigma=0.000593 ! Fit after self-cal, rms=0.097373Jy sigma=0.000593 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097373Jy sigma=0.000593 ! Fit after self-cal, rms=0.097746Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.788 mas, bmaj=19.36 mas, bpa=-17.52 degrees ! Estimated noise=1100.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000307573 Jy ! Component: 100 - total flux cleaned = -0.000328571 Jy ! Component: 150 - total flux cleaned = -0.000327491 Jy ! Component: 200 - total flux cleaned = -0.000310831 Jy ! Total flux subtracted in 200 components = -0.000310831 Jy ! Clean residual min=-0.002610 max=0.002800 Jy/beam ! Clean residual mean=-0.000048 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.075987 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 104 components and 0.075987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097736Jy sigma=0.000592 ! Fit after self-cal, rms=0.097790Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.56048e-05 Jy ! Component: 100 - total flux cleaned = -3.53379e-05 Jy ! Component: 150 - total flux cleaned = -1.94365e-05 Jy ! Component: 200 - total flux cleaned = -5.57462e-06 Jy ! Total flux subtracted in 200 components = -5.57462e-06 Jy ! Clean residual min=-0.002677 max=0.002835 Jy/beam ! Clean residual mean=-0.000052 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0759815 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 108 components and 0.0759815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097782Jy sigma=0.000592 ! Fit after self-cal, rms=0.097761Jy sigma=0.000592 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097761Jy sigma=0.000592 ! Fit after self-cal, rms=0.097808Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.16 mas, bmaj=34.5 mas, bpa=-2.469 degrees ! Estimated noise=1250.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.74044e-05 Jy ! Component: 100 - total flux cleaned = -1.08142e-05 Jy ! Component: 150 - total flux cleaned = 3.94029e-05 Jy ! Component: 200 - total flux cleaned = 7.09831e-05 Jy ! Total flux subtracted in 200 components = 7.09831e-05 Jy ! Clean residual min=-0.002961 max=0.002429 Jy/beam ! Clean residual mean=-0.000067 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.0760525 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 109 components and 0.0760525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097804Jy sigma=0.000592 ! Fit after self-cal, rms=0.097815Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.96706e-05 Jy ! Component: 100 - total flux cleaned = 0.000115451 Jy ! Component: 150 - total flux cleaned = 0.000158018 Jy ! Component: 200 - total flux cleaned = 0.000197079 Jy ! Total flux subtracted in 200 components = 0.000197079 Jy ! Clean residual min=-0.002986 max=0.002385 Jy/beam ! Clean residual mean=-0.000067 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.0762495 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 111 components and 0.0762496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097815Jy sigma=0.000592 ! Fit after self-cal, rms=0.097818Jy sigma=0.000592 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.79 mas, bmaj=19.45 mas, bpa=-17.42 degrees ! Estimated noise=1097.78 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.79 x 19.45 at -17.42 degrees (North through East) ! Clean map min=-0.002668 max=0.061664 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.653 mas, bmaj=15.12 mas, bpa=-18.19 degrees ! Estimated noise=1862.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0491213 Jy ! Component: 100 - total flux cleaned = 0.0618404 Jy ! Component: 150 - total flux cleaned = 0.0679638 Jy ! Component: 200 - total flux cleaned = 0.0708789 Jy ! Total flux subtracted in 200 components = 0.0708789 Jy ! Clean residual min=-0.005306 max=0.004779 Jy/beam ! Clean residual mean=-0.000026 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.0708789 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0708789 Jy ! Inverting map and beam ! Estimated beam: bmin=3.79 mas, bmaj=19.45 mas, bpa=-17.42 degrees ! Estimated noise=1097.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00358438 Jy ! Component: 100 - total flux cleaned = 0.00465599 Jy ! Component: 150 - total flux cleaned = 0.0047891 Jy ! Component: 200 - total flux cleaned = 0.0048283 Jy ! Total flux subtracted in 200 components = 0.0048283 Jy ! Clean residual min=-0.002959 max=0.003065 Jy/beam ! Clean residual mean=-0.000047 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.0757072 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 41 components and 0.0757072 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.16 mas, bmaj=34.5 mas, bpa=-2.469 degrees ! Estimated noise=1250.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467402 Jy ! Component: 100 - total flux cleaned = 0.000546013 Jy ! Component: 150 - total flux cleaned = 0.000615261 Jy ! Component: 200 - total flux cleaned = 0.000678026 Jy ! Total flux subtracted in 200 components = 0.000678026 Jy ! Clean residual min=-0.003094 max=0.002482 Jy/beam ! Clean residual mean=-0.000065 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.0763852 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.6651e-05 Jy ! Component: 100 - total flux cleaned = 9.09275e-05 Jy ! Component: 150 - total flux cleaned = 0.00013886 Jy ! Component: 200 - total flux cleaned = 0.000183432 Jy ! Total flux subtracted in 200 components = 0.000183432 Jy ! Clean residual min=-0.003034 max=0.002426 Jy/beam ! Clean residual mean=-0.000064 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.0765686 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 58 components and 0.0765686 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.79 mas, bmaj=19.45 mas, bpa=-17.42 degrees ! Estimated noise=1097.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000401982 Jy ! Component: 100 - total flux cleaned = -0.000472788 Jy ! Component: 150 - total flux cleaned = -0.000563555 Jy ! Component: 200 - total flux cleaned = -0.000588446 Jy ! Total flux subtracted in 200 components = -0.000588446 Jy ! Clean residual min=-0.002703 max=0.002899 Jy/beam ! Clean residual mean=-0.000046 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.0759802 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.0759802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097819Jy sigma=0.000592 ! Fit after self-cal, rms=0.097814Jy sigma=0.000592 wmodel J1742-3341_S_2017_10_09_pus_map.mod ! Writing 68 model components to file: J1742-3341_S_2017_10_09_pus_map.mod wobs J1742-3341_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1742-3341_S_2017_10_09_pus_uvs.fits wwins J1742-3341_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1742-3341_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000206289 Jy ! Component: 100 - total flux cleaned = -3.55823e-05 Jy ! Component: 150 - total flux cleaned = 0.000319789 Jy ! Component: 200 - total flux cleaned = 0.000649134 Jy ! Component: 250 - total flux cleaned = 0.000923501 Jy ! Component: 300 - total flux cleaned = 0.00115132 Jy ! Component: 350 - total flux cleaned = 0.00112075 Jy ! Component: 400 - total flux cleaned = 0.00126879 Jy ! Component: 450 - total flux cleaned = 0.00141137 Jy ! Component: 500 - total flux cleaned = 0.00154896 Jy ! Component: 550 - total flux cleaned = 0.00165566 Jy ! Component: 600 - total flux cleaned = 0.00173441 Jy ! Component: 650 - total flux cleaned = 0.00186042 Jy ! Component: 700 - total flux cleaned = 0.00200691 Jy ! Component: 750 - total flux cleaned = 0.00214893 Jy ! Component: 800 - total flux cleaned = 0.00221827 Jy ! Component: 850 - total flux cleaned = 0.00235332 Jy ! Component: 900 - total flux cleaned = 0.00239706 Jy ! Component: 950 - total flux cleaned = 0.00241894 Jy ! Component: 1000 - total flux cleaned = 0.00248162 Jy ! Component: 1050 - total flux cleaned = 0.00254243 Jy ! Component: 1100 - total flux cleaned = 0.00252263 Jy ! Component: 1150 - total flux cleaned = 0.00256169 Jy ! Component: 1200 - total flux cleaned = 0.00256164 Jy ! Component: 1250 - total flux cleaned = 0.00252461 Jy ! Component: 1300 - total flux cleaned = 0.00256031 Jy ! Component: 1350 - total flux cleaned = 0.00255988 Jy ! Component: 1400 - total flux cleaned = 0.00259449 Jy ! Component: 1450 - total flux cleaned = 0.0026114 Jy ! Component: 1500 - total flux cleaned = 0.00261135 Jy ! Component: 1550 - total flux cleaned = 0.00259485 Jy ! Component: 1600 - total flux cleaned = 0.00256264 Jy ! Component: 1650 - total flux cleaned = 0.00257861 Jy ! Component: 1700 - total flux cleaned = 0.00256282 Jy ! Component: 1750 - total flux cleaned = 0.00254739 Jy ! Component: 1800 - total flux cleaned = 0.00251729 Jy ! Component: 1850 - total flux cleaned = 0.00250262 Jy ! Component: 1900 - total flux cleaned = 0.00250282 Jy ! Component: 1950 - total flux cleaned = 0.00247383 Jy ! Component: 2000 - total flux cleaned = 0.00245946 Jy ! Component: 2050 - total flux cleaned = 0.00244543 Jy ! Component: 2100 - total flux cleaned = 0.00238975 Jy ! Component: 2150 - total flux cleaned = 0.00241725 Jy ! Component: 2200 - total flux cleaned = 0.00236249 Jy ! Component: 2250 - total flux cleaned = 0.00232202 Jy ! Component: 2300 - total flux cleaned = 0.00225544 Jy ! Component: 2350 - total flux cleaned = 0.00224236 Jy ! Component: 2400 - total flux cleaned = 0.00217726 Jy ! Component: 2450 - total flux cleaned = 0.00219027 Jy ! Component: 2500 - total flux cleaned = 0.00217752 Jy ! Component: 2550 - total flux cleaned = 0.00216498 Jy ! Component: 2600 - total flux cleaned = 0.00216506 Jy ! Component: 2650 - total flux cleaned = 0.00216496 Jy ! Component: 2700 - total flux cleaned = 0.00211535 Jy ! Component: 2750 - total flux cleaned = 0.00210295 Jy ! Component: 2800 - total flux cleaned = 0.00206632 Jy ! Component: 2850 - total flux cleaned = 0.00205422 Jy ! Component: 2900 - total flux cleaned = 0.00202995 Jy ! Component: 2950 - total flux cleaned = 0.00196982 Jy ! Component: 3000 - total flux cleaned = 0.00194591 Jy ! Component: 3050 - total flux cleaned = 0.001934 Jy ! Component: 3100 - total flux cleaned = 0.00191023 Jy ! Component: 3150 - total flux cleaned = 0.00183958 Jy ! Component: 3200 - total flux cleaned = 0.00180451 Jy ! Component: 3250 - total flux cleaned = 0.00179284 Jy ! Component: 3300 - total flux cleaned = 0.00178125 Jy ! Component: 3350 - total flux cleaned = 0.0017466 Jy ! Component: 3400 - total flux cleaned = 0.00174655 Jy ! Component: 3450 - total flux cleaned = 0.00176954 Jy ! Component: 3500 - total flux cleaned = 0.00175807 Jy ! Component: 3550 - total flux cleaned = 0.00181505 Jy ! Component: 3600 - total flux cleaned = 0.00182644 Jy ! Component: 3650 - total flux cleaned = 0.00187185 Jy ! Component: 3700 - total flux cleaned = 0.00186049 Jy ! Component: 3750 - total flux cleaned = 0.00188315 Jy ! Component: 3800 - total flux cleaned = 0.00188314 Jy ! Component: 3850 - total flux cleaned = 0.00188315 Jy ! Component: 3900 - total flux cleaned = 0.00188315 Jy ! Component: 3950 - total flux cleaned = 0.00189434 Jy ! Component: 4000 - total flux cleaned = 0.00188315 Jy ! Component: 4050 - total flux cleaned = 0.00188318 Jy ! Total flux subtracted in 4096 components = 0.00188318 Jy ! Clean residual min=-0.000707 max=0.000614 Jy/beam ! Clean residual mean=0.000001 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.0778634 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 344 components and 0.0778634 Jy ![Exited script file: muppet] wmap "J1742-3341_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.79 x 19.45 at -17.42 degrees (North through East) ! Clean map min=-0.0022444 max=0.059735 Jy/beam ! Writing clean map to FITS file: J1742-3341_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0597352 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000197709 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.992929 0.992929 1.98586 3.97172 7.94343 15.8869 31.7737 63.5474 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.79 x 19.45 at -17.42 degrees (North through East) ! Clean map min=-0.0022444 max=0.059735 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1742-3341_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:17:06 2019