! Started logfile: J1739+4955_S_2017_08_05_pus_uvs.log on Thu May 9 19:34:19 2019 obs J1739+4955_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1739+4955_S_2017_08_05_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.717778 visibilities/baseline/integration-bin. ! Found source: J1739+4955 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 1292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1739+4955_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.646064Jy sigma=0.006105 ! Fit after self-cal, rms=0.640595Jy sigma=0.006063 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.74 mas, bmaj=9.156 mas, bpa=30.87 degrees ! Estimated noise=2917.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.278886 Jy ! Component: 100 - total flux cleaned = 0.339934 Jy ! Total flux subtracted in 100 components = 0.339934 Jy ! Clean residual min=-0.015178 max=0.024147 Jy/beam ! Clean residual mean=-0.000129 rms=0.004412 Jy/beam ! Combined flux in latest and established models = 0.339934 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.339934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097331Jy sigma=0.000795 ! Fit after self-cal, rms=0.097335Jy sigma=0.000795 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=9.978 mas, bpa=29.96 degrees ! Estimated noise=2549.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, 30). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0241226 Jy ! Component: 100 - total flux cleaned = 0.0372791 Jy ! Component: 150 - total flux cleaned = 0.0460603 Jy ! Component: 200 - total flux cleaned = 0.0510274 Jy ! Total flux subtracted in 200 components = 0.0510274 Jy ! Clean residual min=-0.013161 max=0.011377 Jy/beam ! Clean residual mean=-0.000093 rms=0.002773 Jy/beam ! Combined flux in latest and established models = 0.390962 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 33 components and 0.390962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089005Jy sigma=0.000744 ! Fit after self-cal, rms=0.088919Jy sigma=0.000742 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.97 KP 1.04 ! LA 1.02 MK 1.10 NL 0.86 OV 1.03 ! PT 1.06 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.03 KP 1.03 ! LA 1.01 MK 1.03 NL 1.01 OV 1.03 ! PT 1.03 SC 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 0.99 KP 0.93 ! LA 0.76 MK 1.04 NL 1.16 OV 0.97 ! PT 0.98 SC 1.11 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.088919Jy sigma=0.000742 ! Fit after self-cal, rms=0.072174Jy sigma=0.000637 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=10.01 mas, bpa=30.58 degrees ! Estimated noise=2558.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255306 Jy ! Component: 100 - total flux cleaned = 0.00404626 Jy ! Component: 150 - total flux cleaned = 0.00534731 Jy ! Component: 200 - total flux cleaned = 0.00612108 Jy ! Total flux subtracted in 200 components = 0.00612108 Jy ! Clean residual min=-0.005797 max=0.005692 Jy/beam ! Clean residual mean=-0.000038 rms=0.001438 Jy/beam ! Combined flux in latest and established models = 0.397083 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.397083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071798Jy sigma=0.000633 ! Fit after self-cal, rms=0.071746Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071746Jy sigma=0.000633 ! Fit after self-cal, rms=0.071767Jy sigma=0.000633 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=10.01 mas, bpa=30.59 degrees ! Estimated noise=2557.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115394 Jy ! Component: 100 - total flux cleaned = 0.0014522 Jy ! Component: 150 - total flux cleaned = 0.00165419 Jy ! Component: 200 - total flux cleaned = 0.00183959 Jy ! Total flux subtracted in 200 components = 0.00183959 Jy ! Clean residual min=-0.005707 max=0.005829 Jy/beam ! Clean residual mean=-0.000036 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 0.398922 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 0.398922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071647Jy sigma=0.000631 ! Fit after self-cal, rms=0.071646Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185772 Jy ! Component: 100 - total flux cleaned = 0.000185654 Jy ! Component: 150 - total flux cleaned = 0.000291895 Jy ! Component: 200 - total flux cleaned = 0.00034142 Jy ! Total flux subtracted in 200 components = 0.00034142 Jy ! Clean residual min=-0.005709 max=0.005877 Jy/beam ! Clean residual mean=-0.000035 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.399264 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 86 components and 0.399264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071574Jy sigma=0.000631 ! Fit after self-cal, rms=0.071575Jy sigma=0.000631 ! Inverting map ! Added new window around map position (-103, 122). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00555871 Jy ! Component: 100 - total flux cleaned = 0.00753096 Jy ! Component: 150 - total flux cleaned = 0.00802472 Jy ! Component: 200 - total flux cleaned = 0.00883392 Jy ! Total flux subtracted in 200 components = 0.00883392 Jy ! Clean residual min=-0.005240 max=0.005079 Jy/beam ! Clean residual mean=-0.000040 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.408098 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 104 components and 0.408098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071051Jy sigma=0.000627 ! Fit after self-cal, rms=0.071024Jy sigma=0.000627 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071024Jy sigma=0.000627 ! Fit after self-cal, rms=0.071063Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=10 mas, bpa=30.6 degrees ! Estimated noise=2557.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228166 Jy ! Component: 100 - total flux cleaned = 0.00350214 Jy ! Component: 150 - total flux cleaned = 0.00434108 Jy ! Component: 200 - total flux cleaned = 0.00506508 Jy ! Total flux subtracted in 200 components = 0.00506508 Jy ! Clean residual min=-0.005169 max=0.004688 Jy/beam ! Clean residual mean=-0.000037 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.413163 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 116 components and 0.413163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070915Jy sigma=0.000625 ! Fit after self-cal, rms=0.070913Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00092517 Jy ! Component: 100 - total flux cleaned = 0.00156843 Jy ! Component: 150 - total flux cleaned = 0.00207422 Jy ! Component: 200 - total flux cleaned = 0.00241138 Jy ! Total flux subtracted in 200 components = 0.00241138 Jy ! Clean residual min=-0.005090 max=0.004628 Jy/beam ! Clean residual mean=-0.000034 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.415574 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 126 components and 0.415574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070839Jy sigma=0.000625 ! Fit after self-cal, rms=0.070839Jy sigma=0.000625 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070839Jy sigma=0.000625 ! Fit after self-cal, rms=0.070889Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.543 mas, bmaj=11.49 mas, bpa=23.19 degrees ! Estimated noise=3188.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000852659 Jy ! Component: 100 - total flux cleaned = 0.00185339 Jy ! Component: 150 - total flux cleaned = 0.0023816 Jy ! Component: 200 - total flux cleaned = 0.00276589 Jy ! Total flux subtracted in 200 components = 0.00276589 Jy ! Clean residual min=-0.004873 max=0.004110 Jy/beam ! Clean residual mean=-0.000058 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.41834 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 145 components and 0.41834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070880Jy sigma=0.000624 ! Fit after self-cal, rms=0.070878Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000380275 Jy ! Component: 100 - total flux cleaned = 0.000566906 Jy ! Component: 150 - total flux cleaned = 0.000811178 Jy ! Component: 200 - total flux cleaned = 0.00100726 Jy ! Total flux subtracted in 200 components = 0.00100726 Jy ! Clean residual min=-0.004704 max=0.004074 Jy/beam ! Clean residual mean=-0.000055 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.419347 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 153 components and 0.419347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070867Jy sigma=0.000624 ! Fit after self-cal, rms=0.070868Jy sigma=0.000624 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=10 mas, bpa=30.61 degrees ! Estimated noise=2558.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.153 x 10 at 30.61 degrees (North through East) ! Clean map min=-0.0048064 max=0.35122 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.796 mas, bmaj=9.198 mas, bpa=31.77 degrees ! Estimated noise=2921.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.278972 Jy ! Component: 100 - total flux cleaned = 0.339962 Jy ! Component: 150 - total flux cleaned = 0.357332 Jy ! Component: 200 - total flux cleaned = 0.366567 Jy ! Total flux subtracted in 200 components = 0.366567 Jy ! Clean residual min=-0.007166 max=0.007246 Jy/beam ! Clean residual mean=-0.000064 rms=0.001930 Jy/beam ! Combined flux in latest and established models = 0.366567 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.366567 Jy ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=10 mas, bpa=30.61 degrees ! Estimated noise=2558.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00842301 Jy ! Component: 100 - total flux cleaned = 0.0148683 Jy ! Component: 150 - total flux cleaned = 0.0202669 Jy ! Component: 200 - total flux cleaned = 0.0248708 Jy ! Total flux subtracted in 200 components = 0.0248708 Jy ! Clean residual min=-0.005796 max=0.005126 Jy/beam ! Clean residual mean=-0.000078 rms=0.001509 Jy/beam ! Combined flux in latest and established models = 0.391438 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 48 components and 0.391438 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.543 mas, bmaj=11.49 mas, bpa=23.19 degrees ! Estimated noise=3188.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00601274 Jy ! Component: 100 - total flux cleaned = 0.0101133 Jy ! Component: 150 - total flux cleaned = 0.0134337 Jy ! Component: 200 - total flux cleaned = 0.0157568 Jy ! Total flux subtracted in 200 components = 0.0157568 Jy ! Clean residual min=-0.005305 max=0.004030 Jy/beam ! Clean residual mean=-0.000096 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.407195 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197786 Jy ! Component: 100 - total flux cleaned = 0.00363536 Jy ! Component: 150 - total flux cleaned = 0.00504036 Jy ! Component: 200 - total flux cleaned = 0.00636417 Jy ! Total flux subtracted in 200 components = 0.00636417 Jy ! Clean residual min=-0.005032 max=0.004302 Jy/beam ! Clean residual mean=-0.000073 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.413559 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 102 components and 0.413559 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=10 mas, bpa=30.61 degrees ! Estimated noise=2558.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134477 Jy ! Component: 100 - total flux cleaned = 0.0026621 Jy ! Component: 150 - total flux cleaned = 0.00354813 Jy ! Component: 200 - total flux cleaned = 0.0041707 Jy ! Total flux subtracted in 200 components = 0.0041707 Jy ! Clean residual min=-0.005087 max=0.004846 Jy/beam ! Clean residual mean=-0.000036 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.417729 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 123 components and 0.417729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071227Jy sigma=0.000627 ! Fit after self-cal, rms=0.071204Jy sigma=0.000626 wmodel J1739+4955_S_2017_08_05_pus_map.mod ! Writing 123 model components to file: J1739+4955_S_2017_08_05_pus_map.mod wobs J1739+4955_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1739+4955_S_2017_08_05_pus_uvs.fits wwins J1739+4955_S_2017_08_05_pus_map.win ! wwins: Wrote 3 windows to J1739+4955_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000403927 Jy ! Component: 100 - total flux cleaned = -1.56551e-05 Jy ! Component: 150 - total flux cleaned = 0.000270264 Jy ! Component: 200 - total flux cleaned = 0.000142482 Jy ! Component: 250 - total flux cleaned = -3.93903e-05 Jy ! Component: 300 - total flux cleaned = -0.000388497 Jy ! Component: 350 - total flux cleaned = -0.000723547 Jy ! Component: 400 - total flux cleaned = -0.00109739 Jy ! Component: 450 - total flux cleaned = -0.00155839 Jy ! Component: 500 - total flux cleaned = -0.00210274 Jy ! Component: 550 - total flux cleaned = -0.00258041 Jy ! Component: 600 - total flux cleaned = -0.00299681 Jy ! Component: 650 - total flux cleaned = -0.00335636 Jy ! Component: 700 - total flux cleaned = -0.00379272 Jy ! Component: 750 - total flux cleaned = -0.00413226 Jy ! Component: 800 - total flux cleaned = -0.0044633 Jy ! Component: 850 - total flux cleaned = -0.00466462 Jy ! Component: 900 - total flux cleaned = -0.00482278 Jy ! Component: 950 - total flux cleaned = -0.00509397 Jy ! Component: 1000 - total flux cleaned = -0.00535904 Jy ! Component: 1050 - total flux cleaned = -0.00554422 Jy ! Component: 1100 - total flux cleaned = -0.00579873 Jy ! Component: 1150 - total flux cleaned = -0.00594067 Jy ! Component: 1200 - total flux cleaned = -0.00597594 Jy ! Component: 1250 - total flux cleaned = -0.00614823 Jy ! Component: 1300 - total flux cleaned = -0.00614844 Jy ! Component: 1350 - total flux cleaned = -0.00628174 Jy ! Component: 1400 - total flux cleaned = -0.00628182 Jy ! Component: 1450 - total flux cleaned = -0.00634695 Jy ! Component: 1500 - total flux cleaned = -0.00641058 Jy ! Component: 1550 - total flux cleaned = -0.00653575 Jy ! Component: 1600 - total flux cleaned = -0.00669059 Jy ! Component: 1650 - total flux cleaned = -0.00684358 Jy ! Component: 1700 - total flux cleaned = -0.00702451 Jy ! Component: 1750 - total flux cleaned = -0.0071439 Jy ! Component: 1800 - total flux cleaned = -0.00734974 Jy ! Component: 1850 - total flux cleaned = -0.00749512 Jy ! Component: 1900 - total flux cleaned = -0.00760995 Jy ! Component: 1950 - total flux cleaned = -0.00775222 Jy ! Component: 2000 - total flux cleaned = -0.00792128 Jy ! Component: 2050 - total flux cleaned = -0.00808831 Jy ! Component: 2100 - total flux cleaned = -0.00814335 Jy ! Component: 2150 - total flux cleaned = -0.00825293 Jy ! Component: 2200 - total flux cleaned = -0.00841576 Jy ! Component: 2250 - total flux cleaned = -0.00855022 Jy ! Component: 2300 - total flux cleaned = -0.00873708 Jy ! Component: 2350 - total flux cleaned = -0.00886946 Jy ! Component: 2400 - total flux cleaned = -0.00905337 Jy ! Component: 2450 - total flux cleaned = -0.0091838 Jy ! Component: 2500 - total flux cleaned = -0.00939086 Jy ! Component: 2550 - total flux cleaned = -0.00954503 Jy ! Component: 2600 - total flux cleaned = -0.00962155 Jy ! Component: 2650 - total flux cleaned = -0.00977391 Jy ! Component: 2700 - total flux cleaned = -0.00989997 Jy ! Component: 2750 - total flux cleaned = -0.0100254 Jy ! Component: 2800 - total flux cleaned = -0.0101002 Jy ! Component: 2850 - total flux cleaned = -0.0101996 Jy ! Component: 2900 - total flux cleaned = -0.0102983 Jy ! Component: 2950 - total flux cleaned = -0.0104456 Jy ! Component: 3000 - total flux cleaned = -0.010592 Jy ! Component: 3050 - total flux cleaned = -0.0106892 Jy ! Component: 3100 - total flux cleaned = -0.0107618 Jy ! Component: 3150 - total flux cleaned = -0.0108582 Jy ! Component: 3200 - total flux cleaned = -0.0109542 Jy ! Component: 3250 - total flux cleaned = -0.0110973 Jy ! Component: 3300 - total flux cleaned = -0.0111923 Jy ! Component: 3350 - total flux cleaned = -0.0112396 Jy ! Component: 3400 - total flux cleaned = -0.011334 Jy ! Component: 3450 - total flux cleaned = -0.0114514 Jy ! Component: 3500 - total flux cleaned = -0.0115215 Jy ! Component: 3550 - total flux cleaned = -0.0116382 Jy ! Component: 3600 - total flux cleaned = -0.0117546 Jy ! Component: 3650 - total flux cleaned = -0.0118243 Jy ! Component: 3700 - total flux cleaned = -0.0119172 Jy ! Component: 3750 - total flux cleaned = -0.0120331 Jy ! Component: 3800 - total flux cleaned = -0.0121721 Jy ! Component: 3850 - total flux cleaned = -0.0123109 Jy ! Component: 3900 - total flux cleaned = -0.0123802 Jy ! Component: 3950 - total flux cleaned = -0.012519 Jy ! Component: 4000 - total flux cleaned = -0.0125885 Jy ! Component: 4050 - total flux cleaned = -0.0127043 Jy ! Total flux subtracted in 4096 components = -0.0128205 Jy ! Clean residual min=-0.001307 max=0.001263 Jy/beam ! Clean residual mean=-0.000006 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.404909 Jy keep ! Adding 223 model components to the UV plane model. ! The established model now contains 346 components and 0.404909 Jy ![Exited script file: muppet] wmap "J1739+4955_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.153 x 10 at 30.61 degrees (North through East) ! Clean map min=-0.0031332 max=0.35183 Jy/beam ! Writing clean map to FITS file: J1739+4955_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.351831 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000397263 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.338739 0.338739 0.677477 1.35495 2.70991 5.41982 10.8396 21.6793 43.3585 86.7171 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.351 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.153 x 10 at 30.61 degrees (North through East) ! Clean map min=-0.0031332 max=0.35183 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1739+4955_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:34:24 2019