! Started logfile: J1739+4955_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:46:00 2019 obs J1739+4955_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1739+4955_S_2017_03_27_pus_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.582716 visibilities/baseline/integration-bin. ! Found source: J1739+4955 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 1888 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1739+4955_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.754521Jy sigma=0.006392 ! Fit after self-cal, rms=0.745654Jy sigma=0.006335 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.334 mas, bmaj=11.04 mas, bpa=-48.23 degrees ! Estimated noise=3311.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.199634 Jy ! Component: 100 - total flux cleaned = 0.246004 Jy ! Total flux subtracted in 100 components = 0.246004 Jy ! Clean residual min=-0.014486 max=0.019779 Jy/beam ! Clean residual mean=0.000083 rms=0.005050 Jy/beam ! Combined flux in latest and established models = 0.246004 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.246004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102191Jy sigma=0.000771 ! Fit after self-cal, rms=0.102190Jy sigma=0.000770 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.183 mas, bmaj=12.01 mas, bpa=-47.18 degrees ! Estimated noise=2119.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257135 Jy ! Component: 100 - total flux cleaned = 0.0384199 Jy ! Component: 150 - total flux cleaned = 0.0469886 Jy ! Component: 200 - total flux cleaned = 0.0530026 Jy ! Total flux subtracted in 200 components = 0.0530026 Jy ! Clean residual min=-0.007779 max=0.008334 Jy/beam ! Clean residual mean=0.000035 rms=0.002135 Jy/beam ! Combined flux in latest and established models = 0.299006 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 79 components and 0.299006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096809Jy sigma=0.000696 ! Fit after self-cal, rms=0.096842Jy sigma=0.000695 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.03 KP 1.08 ! LA 0.99 MK 1.00* NL 1.02 OV 1.00 ! PT 0.99 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.03 KP 0.94 ! LA 0.94 MK 1.00* NL 1.01 OV 1.04 ! PT 0.99 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.01 KP 0.98 ! LA 1.05 MK 1.00* NL 1.02 OV 0.92 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.05 KP 1.00* ! LA 0.75 MK 1.00* NL 1.00* OV 2.51 ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.096842Jy sigma=0.000695 ! Fit after self-cal, rms=0.117567Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.217 mas, bmaj=12.09 mas, bpa=-47.04 degrees ! Estimated noise=2100.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00206784 Jy ! Component: 100 - total flux cleaned = -0.00242758 Jy ! Component: 150 - total flux cleaned = -0.0027196 Jy ! Component: 200 - total flux cleaned = -0.00302241 Jy ! Total flux subtracted in 200 components = -0.00302241 Jy ! Clean residual min=-0.004753 max=0.006003 Jy/beam ! Clean residual mean=-0.000003 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.295984 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 0.295984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117479Jy sigma=0.000658 ! Fit after self-cal, rms=0.117776Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117776Jy sigma=0.000658 ! Fit after self-cal, rms=0.119172Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.221 mas, bmaj=12.1 mas, bpa=-46.96 degrees ! Estimated noise=2099.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177503 Jy ! Component: 100 - total flux cleaned = -0.00217807 Jy ! Component: 150 - total flux cleaned = -0.00244634 Jy ! Component: 200 - total flux cleaned = -0.00254862 Jy ! Total flux subtracted in 200 components = -0.00254862 Jy ! Clean residual min=-0.004595 max=0.005869 Jy/beam ! Clean residual mean=-0.000004 rms=0.001285 Jy/beam ! Combined flux in latest and established models = 0.293435 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 99 components and 0.293435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119115Jy sigma=0.000658 ! Fit after self-cal, rms=0.119123Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (54, 10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0042694 Jy ! Component: 100 - total flux cleaned = 0.00554746 Jy ! Component: 150 - total flux cleaned = 0.00619652 Jy ! Component: 200 - total flux cleaned = 0.00702467 Jy ! Total flux subtracted in 200 components = 0.00702467 Jy ! Clean residual min=-0.004183 max=0.003504 Jy/beam ! Clean residual mean=-0.000003 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.30046 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 123 components and 0.30046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118837Jy sigma=0.000655 ! Fit after self-cal, rms=0.118854Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118854Jy sigma=0.000655 ! Fit after self-cal, rms=0.118537Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.221 mas, bmaj=12.1 mas, bpa=-46.95 degrees ! Estimated noise=2093.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000814441 Jy ! Component: 100 - total flux cleaned = 0.000995204 Jy ! Component: 150 - total flux cleaned = 0.00104789 Jy ! Component: 200 - total flux cleaned = 0.00104392 Jy ! Total flux subtracted in 200 components = 0.00104392 Jy ! Clean residual min=-0.003485 max=0.003168 Jy/beam ! Clean residual mean=-0.000004 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.301504 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 146 components and 0.301504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118471Jy sigma=0.000654 ! Fit after self-cal, rms=0.118472Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145793 Jy ! Component: 100 - total flux cleaned = 0.000189325 Jy ! Component: 150 - total flux cleaned = 0.000189515 Jy ! Component: 200 - total flux cleaned = 0.000152854 Jy ! Total flux subtracted in 200 components = 0.000152854 Jy ! Clean residual min=-0.003221 max=0.002995 Jy/beam ! Clean residual mean=-0.000003 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.301657 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 157 components and 0.301657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118434Jy sigma=0.000653 ! Fit after self-cal, rms=0.118437Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118437Jy sigma=0.000653 ! Fit after self-cal, rms=0.118105Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.92 mas, bmaj=14.58 mas, bpa=-48.21 degrees ! Estimated noise=2215.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000425763 Jy ! Component: 100 - total flux cleaned = -0.000549488 Jy ! Component: 150 - total flux cleaned = -0.000724225 Jy ! Component: 200 - total flux cleaned = -0.000817293 Jy ! Total flux subtracted in 200 components = -0.000817293 Jy ! Clean residual min=-0.002813 max=0.002671 Jy/beam ! Clean residual mean=-0.000004 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.300839 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 182 components and 0.300839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118071Jy sigma=0.000653 ! Fit after self-cal, rms=0.118069Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.38238e-05 Jy ! Component: 100 - total flux cleaned = -0.000159477 Jy ! Component: 150 - total flux cleaned = -0.00024009 Jy ! Component: 200 - total flux cleaned = -0.000290974 Jy ! Total flux subtracted in 200 components = -0.000290974 Jy ! Clean residual min=-0.002645 max=0.002615 Jy/beam ! Clean residual mean=-0.000003 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.300548 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 199 components and 0.300548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118055Jy sigma=0.000653 ! Fit after self-cal, rms=0.118060Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.218 mas, bmaj=12.1 mas, bpa=-46.95 degrees ! Estimated noise=2088.38 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.218 x 12.1 at -46.95 degrees (North through East) ! Clean map min=-0.0029464 max=0.26113 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.358 mas, bmaj=11.08 mas, bpa=-47.97 degrees ! Estimated noise=3290.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.198066 Jy ! Component: 100 - total flux cleaned = 0.243431 Jy ! Component: 150 - total flux cleaned = 0.262833 Jy ! Component: 200 - total flux cleaned = 0.273562 Jy ! Total flux subtracted in 200 components = 0.273562 Jy ! Clean residual min=-0.007258 max=0.007246 Jy/beam ! Clean residual mean=0.000031 rms=0.002186 Jy/beam ! Combined flux in latest and established models = 0.273562 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.273562 Jy ! Inverting map and beam ! Estimated beam: bmin=5.218 mas, bmaj=12.1 mas, bpa=-46.95 degrees ! Estimated noise=2088.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00817776 Jy ! Component: 100 - total flux cleaned = 0.0125717 Jy ! Component: 150 - total flux cleaned = 0.0156455 Jy ! Component: 200 - total flux cleaned = 0.0178951 Jy ! Total flux subtracted in 200 components = 0.0178951 Jy ! Clean residual min=-0.003916 max=0.004461 Jy/beam ! Clean residual mean=0.000012 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.291457 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 80 components and 0.291457 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.92 mas, bmaj=14.58 mas, bpa=-48.21 degrees ! Estimated noise=2215.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336749 Jy ! Component: 100 - total flux cleaned = 0.00463028 Jy ! Component: 150 - total flux cleaned = 0.00556143 Jy ! Component: 200 - total flux cleaned = 0.00634526 Jy ! Total flux subtracted in 200 components = 0.00634526 Jy ! Clean residual min=-0.003257 max=0.003749 Jy/beam ! Clean residual mean=0.000003 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.297802 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052251 Jy ! Component: 100 - total flux cleaned = 0.000941318 Jy ! Component: 150 - total flux cleaned = 0.00127684 Jy ! Component: 200 - total flux cleaned = 0.00136791 Jy ! Total flux subtracted in 200 components = 0.00136791 Jy ! Clean residual min=-0.002953 max=0.003444 Jy/beam ! Clean residual mean=-0.000000 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.29917 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 140 components and 0.29917 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.218 mas, bmaj=12.1 mas, bpa=-46.95 degrees ! Estimated noise=2088.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174062 Jy ! Component: 100 - total flux cleaned = 0.000388638 Jy ! Component: 150 - total flux cleaned = 0.000388963 Jy ! Component: 200 - total flux cleaned = 0.000343197 Jy ! Total flux subtracted in 200 components = 0.000343197 Jy ! Clean residual min=-0.003073 max=0.003205 Jy/beam ! Clean residual mean=-0.000001 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.299513 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 164 components and 0.299513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118091Jy sigma=0.000653 ! Fit after self-cal, rms=0.118075Jy sigma=0.000653 wmodel J1739+4955_S_2017_03_27_pus_map.mod ! Writing 164 model components to file: J1739+4955_S_2017_03_27_pus_map.mod wobs J1739+4955_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1739+4955_S_2017_03_27_pus_uvs.fits wwins J1739+4955_S_2017_03_27_pus_map.win ! wwins: Wrote 2 windows to J1739+4955_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000799326 Jy ! Component: 100 - total flux cleaned = 0.0012574 Jy ! Component: 150 - total flux cleaned = 0.00154129 Jy ! Component: 200 - total flux cleaned = 0.00167574 Jy ! Component: 250 - total flux cleaned = 0.00167589 Jy ! Component: 300 - total flux cleaned = 0.0015953 Jy ! Component: 350 - total flux cleaned = 0.00159498 Jy ! Component: 400 - total flux cleaned = 0.00137388 Jy ! Component: 450 - total flux cleaned = 0.00116167 Jy ! Component: 500 - total flux cleaned = 0.000921993 Jy ! Component: 550 - total flux cleaned = 0.000624258 Jy ! Component: 600 - total flux cleaned = 0.000302661 Jy ! Component: 650 - total flux cleaned = 2.16463e-05 Jy ! Component: 700 - total flux cleaned = -0.000191432 Jy ! Component: 750 - total flux cleaned = -0.000430569 Jy ! Component: 800 - total flux cleaned = -0.000606984 Jy ! Component: 850 - total flux cleaned = -0.000663998 Jy ! Component: 900 - total flux cleaned = -0.000663345 Jy ! Component: 950 - total flux cleaned = -0.000663662 Jy ! Component: 1000 - total flux cleaned = -0.000690817 Jy ! Component: 1050 - total flux cleaned = -0.000690586 Jy ! Component: 1100 - total flux cleaned = -0.000690146 Jy ! Component: 1150 - total flux cleaned = -0.000664158 Jy ! Component: 1200 - total flux cleaned = -0.000715858 Jy ! Component: 1250 - total flux cleaned = -0.000664904 Jy ! Component: 1300 - total flux cleaned = -0.000639688 Jy ! Component: 1350 - total flux cleaned = -0.00058976 Jy ! Component: 1400 - total flux cleaned = -0.000565175 Jy ! Component: 1450 - total flux cleaned = -0.000467776 Jy ! Component: 1500 - total flux cleaned = -0.000419821 Jy ! Component: 1550 - total flux cleaned = -0.000371963 Jy ! Component: 1600 - total flux cleaned = -0.000324462 Jy ! Component: 1650 - total flux cleaned = -0.000300648 Jy ! Component: 1700 - total flux cleaned = -0.000206535 Jy ! Component: 1750 - total flux cleaned = -0.000136462 Jy ! Component: 1800 - total flux cleaned = -0.000113268 Jy ! Component: 1850 - total flux cleaned = -6.68961e-05 Jy ! Component: 1900 - total flux cleaned = -6.69497e-05 Jy ! Component: 1950 - total flux cleaned = -2.05682e-05 Jy ! Component: 2000 - total flux cleaned = -2.05776e-05 Jy ! Component: 2050 - total flux cleaned = -8.99235e-05 Jy ! Component: 2100 - total flux cleaned = -8.99262e-05 Jy ! Component: 2150 - total flux cleaned = -0.000113142 Jy ! Component: 2200 - total flux cleaned = -0.000182914 Jy ! Component: 2250 - total flux cleaned = -0.00025291 Jy ! Component: 2300 - total flux cleaned = -0.000299692 Jy ! Component: 2350 - total flux cleaned = -0.000369988 Jy ! Component: 2400 - total flux cleaned = -0.000416841 Jy ! Component: 2450 - total flux cleaned = -0.000440423 Jy ! Component: 2500 - total flux cleaned = -0.00048774 Jy ! Component: 2550 - total flux cleaned = -0.000511665 Jy ! Component: 2600 - total flux cleaned = -0.000583407 Jy ! Component: 2650 - total flux cleaned = -0.000631645 Jy ! Component: 2700 - total flux cleaned = -0.000704445 Jy ! Component: 2750 - total flux cleaned = -0.000778033 Jy ! Component: 2800 - total flux cleaned = -0.000827631 Jy ! Component: 2850 - total flux cleaned = -0.000952527 Jy ! Component: 2900 - total flux cleaned = -0.00102801 Jy ! Component: 2950 - total flux cleaned = -0.00112953 Jy ! Component: 3000 - total flux cleaned = -0.0012063 Jy ! Component: 3050 - total flux cleaned = -0.00130933 Jy ! Component: 3100 - total flux cleaned = -0.00143957 Jy ! Component: 3150 - total flux cleaned = -0.00151863 Jy ! Component: 3200 - total flux cleaned = -0.00159828 Jy ! Component: 3250 - total flux cleaned = -0.0017591 Jy ! Component: 3300 - total flux cleaned = -0.00184016 Jy ! Component: 3350 - total flux cleaned = -0.0019766 Jy ! Component: 3400 - total flux cleaned = -0.00208698 Jy ! Component: 3450 - total flux cleaned = -0.00219864 Jy ! Component: 3500 - total flux cleaned = -0.00231145 Jy ! Component: 3550 - total flux cleaned = -0.0024824 Jy ! Component: 3600 - total flux cleaned = -0.00262679 Jy ! Component: 3650 - total flux cleaned = -0.0027436 Jy ! Component: 3700 - total flux cleaned = -0.00283194 Jy ! Component: 3750 - total flux cleaned = -0.0029516 Jy ! Component: 3800 - total flux cleaned = -0.00313305 Jy ! Component: 3850 - total flux cleaned = -0.00319485 Jy ! Component: 3900 - total flux cleaned = -0.00325668 Jy ! Component: 3950 - total flux cleaned = -0.00341295 Jy ! Component: 4000 - total flux cleaned = -0.00344443 Jy ! Component: 4050 - total flux cleaned = -0.00354105 Jy ! Total flux subtracted in 4096 components = -0.00363897 Jy ! Clean residual min=-0.002461 max=0.001782 Jy/beam ! Clean residual mean=-0.000004 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.295874 Jy keep ! Adding 223 model components to the UV plane model. ! The established model now contains 387 components and 0.295874 Jy ![Exited script file: muppet] wmap "J1739+4955_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.218 x 12.1 at -46.95 degrees (North through East) ! Clean map min=-0.0033424 max=0.26116 Jy/beam ! Writing clean map to FITS file: J1739+4955_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.261157 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000570631 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.655504 0.655504 1.31101 2.62202 5.24403 10.4881 20.9761 41.9522 83.9045 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.261 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.218 x 12.1 at -46.95 degrees (North through East) ! Clean map min=-0.0033424 max=0.26116 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1739+4955_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:46:04 2019