! Started logfile: J1736-3400_S_2017_10_09_pus_uvs.log on Sun May 12 13:16:56 2019 obs J1736-3400_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1736-3400_S_2017_10_09_pus_uva.fits ! AN table 1: 236 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.495998 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1736-3400 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 16856 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1736-3400_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 698 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 756 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 639 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1632 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.969704Jy sigma=0.006264 ! Fit after self-cal, rms=0.926849Jy sigma=0.005988 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=13.96 mas, bpa=-18.79 degrees ! Estimated noise=1767.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0491784 Jy ! Component: 100 - total flux cleaned = 0.0637826 Jy ! Total flux subtracted in 100 components = 0.0637826 Jy ! Clean residual min=-0.006839 max=0.009373 Jy/beam ! Clean residual mean=-0.000200 rms=0.002348 Jy/beam ! Combined flux in latest and established models = 0.0637826 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0637826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113594Jy sigma=0.000688 ! Fit after self-cal, rms=0.112968Jy sigma=0.000685 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=16.99 mas, bpa=-18.92 degrees ! Estimated noise=1005.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024775 Jy ! Component: 100 - total flux cleaned = 0.0386284 Jy ! Component: 150 - total flux cleaned = 0.0469495 Jy ! Component: 200 - total flux cleaned = 0.0519826 Jy ! Total flux subtracted in 200 components = 0.0519826 Jy ! Clean residual min=-0.007904 max=0.011878 Jy/beam ! Clean residual mean=-0.000365 rms=0.003275 Jy/beam ! Combined flux in latest and established models = 0.115765 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 87 components and 0.115765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107510Jy sigma=0.000646 ! Fit after self-cal, rms=0.106946Jy sigma=0.000643 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.49 FD 0.94 HN 1.04 KP 1.27 ! LA 0.89 MK 1.08 NL 1.16 OV 1.00* ! PT 0.83 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.56 FD 1.04 HN 0.99 KP 1.23 ! LA 0.79 MK 1.14 NL 1.43 OV 1.00* ! PT 0.81 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 0.99 HN 0.90 KP 1.08 ! LA 0.67 MK 1.20 NL 1.51 OV 1.00* ! PT 0.84 ! ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.74 KP 1.00* ! LA 1.00* MK 0.88 NL 1.00* OV 1.00* ! PT 0.97 ! ! ! Fit before self-cal, rms=0.106946Jy sigma=0.000643 ! Fit after self-cal, rms=0.126592Jy sigma=0.000628 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=17.89 mas, bpa=-19 degrees ! Estimated noise=1049.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000207408 Jy ! Component: 100 - total flux cleaned = -0.000256356 Jy ! Component: 150 - total flux cleaned = -0.000301299 Jy ! Component: 200 - total flux cleaned = -0.000302011 Jy ! Total flux subtracted in 200 components = -0.000302011 Jy ! Clean residual min=-0.005332 max=0.007364 Jy/beam ! Clean residual mean=-0.000026 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 0.115463 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 96 components and 0.115463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126538Jy sigma=0.000628 ! Fit after self-cal, rms=0.128036Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128036Jy sigma=0.000625 ! Fit after self-cal, rms=0.137767Jy sigma=0.000624 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=18.08 mas, bpa=-18.72 degrees ! Estimated noise=1063.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.70258e-05 Jy ! Component: 100 - total flux cleaned = 3.84468e-05 Jy ! Component: 150 - total flux cleaned = 3.60274e-05 Jy ! Component: 200 - total flux cleaned = 3.70471e-05 Jy ! Total flux subtracted in 200 components = 3.70471e-05 Jy ! Clean residual min=-0.004668 max=0.005886 Jy/beam ! Clean residual mean=0.000026 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 0.1155 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 109 components and 0.1155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137738Jy sigma=0.000624 ! Fit after self-cal, rms=0.138148Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.30903e-05 Jy ! Component: 100 - total flux cleaned = -5.63078e-05 Jy ! Component: 150 - total flux cleaned = -7.95513e-05 Jy ! Component: 200 - total flux cleaned = -9.98625e-05 Jy ! Total flux subtracted in 200 components = -9.98625e-05 Jy ! Clean residual min=-0.004594 max=0.005612 Jy/beam ! Clean residual mean=0.000020 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 0.1154 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 113 components and 0.1154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138134Jy sigma=0.000623 ! Fit after self-cal, rms=0.138132Jy sigma=0.000623 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138132Jy sigma=0.000623 ! Fit after self-cal, rms=0.140614Jy sigma=0.000623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.47 mas, bmaj=18.19 mas, bpa=-18.42 degrees ! Estimated noise=1060.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000399189 Jy ! Component: 100 - total flux cleaned = -0.000367263 Jy ! Component: 150 - total flux cleaned = -0.000338639 Jy ! Component: 200 - total flux cleaned = -0.000312665 Jy ! Total flux subtracted in 200 components = -0.000312665 Jy ! Clean residual min=-0.004532 max=0.005808 Jy/beam ! Clean residual mean=0.000038 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.115088 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 118 components and 0.115088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140590Jy sigma=0.000623 ! Fit after self-cal, rms=0.140689Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.29534e-07 Jy ! Component: 100 - total flux cleaned = -2.3267e-05 Jy ! Component: 150 - total flux cleaned = -4.43653e-05 Jy ! Component: 200 - total flux cleaned = -6.49783e-05 Jy ! Total flux subtracted in 200 components = -6.49783e-05 Jy ! Clean residual min=-0.004493 max=0.005690 Jy/beam ! Clean residual mean=0.000036 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.115023 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 121 components and 0.115023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140676Jy sigma=0.000623 ! Fit after self-cal, rms=0.140665Jy sigma=0.000623 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140665Jy sigma=0.000623 ! Fit after self-cal, rms=0.141894Jy sigma=0.000623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.586 mas, bmaj=36.58 mas, bpa=-3.883 degrees ! Estimated noise=1230.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126031 Jy ! Component: 100 - total flux cleaned = 0.00013151 Jy ! Component: 150 - total flux cleaned = 0.0001603 Jy ! Component: 200 - total flux cleaned = 0.000162666 Jy ! Total flux subtracted in 200 components = 0.000162666 Jy ! Clean residual min=-0.005647 max=0.007420 Jy/beam ! Clean residual mean=0.000068 rms=0.001962 Jy/beam ! Combined flux in latest and established models = 0.115185 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 129 components and 0.115185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141890Jy sigma=0.000623 ! Fit after self-cal, rms=0.141936Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.9952e-05 Jy ! Component: 100 - total flux cleaned = 3.20805e-05 Jy ! Component: 150 - total flux cleaned = 3.29834e-05 Jy ! Component: 200 - total flux cleaned = 3.217e-05 Jy ! Total flux subtracted in 200 components = 3.217e-05 Jy ! Clean residual min=-0.005661 max=0.007434 Jy/beam ! Clean residual mean=0.000068 rms=0.001960 Jy/beam ! Combined flux in latest and established models = 0.115218 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 130 components and 0.115218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141936Jy sigma=0.000623 ! Fit after self-cal, rms=0.141927Jy sigma=0.000623 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.483 mas, bmaj=18.29 mas, bpa=-18.16 degrees ! Estimated noise=1058.34 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.483 x 18.29 at -18.16 degrees (North through East) ! Clean map min=-0.0043878 max=0.063968 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.488 mas, bmaj=14.69 mas, bpa=-18.23 degrees ! Estimated noise=2006.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0524648 Jy ! Component: 100 - total flux cleaned = 0.0730897 Jy ! Component: 150 - total flux cleaned = 0.0851867 Jy ! Component: 200 - total flux cleaned = 0.092927 Jy ! Total flux subtracted in 200 components = 0.092927 Jy ! Clean residual min=-0.005964 max=0.008141 Jy/beam ! Clean residual mean=-0.000059 rms=0.001700 Jy/beam ! Combined flux in latest and established models = 0.092927 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.092927 Jy ! Inverting map and beam ! Estimated beam: bmin=3.483 mas, bmaj=18.29 mas, bpa=-18.16 degrees ! Estimated noise=1058.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101189 Jy ! Component: 100 - total flux cleaned = 0.0149912 Jy ! Component: 150 - total flux cleaned = 0.0174789 Jy ! Component: 200 - total flux cleaned = 0.0187971 Jy ! Total flux subtracted in 200 components = 0.0187971 Jy ! Clean residual min=-0.004568 max=0.005649 Jy/beam ! Clean residual mean=0.000015 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 0.111724 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 69 components and 0.111724 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.586 mas, bmaj=36.58 mas, bpa=-3.883 degrees ! Estimated noise=1230.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157518 Jy ! Component: 100 - total flux cleaned = 0.00164821 Jy ! Component: 150 - total flux cleaned = 0.00168171 Jy ! Component: 200 - total flux cleaned = 0.00171344 Jy ! Total flux subtracted in 200 components = 0.00171344 Jy ! Clean residual min=-0.005881 max=0.007304 Jy/beam ! Clean residual mean=0.000045 rms=0.001993 Jy/beam ! Combined flux in latest and established models = 0.113438 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.96845e-05 Jy ! Component: 100 - total flux cleaned = 5.67868e-05 Jy ! Component: 150 - total flux cleaned = 8.23994e-05 Jy ! Component: 200 - total flux cleaned = 0.000107067 Jy ! Total flux subtracted in 200 components = 0.000107067 Jy ! Clean residual min=-0.005869 max=0.007308 Jy/beam ! Clean residual mean=0.000046 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 0.113545 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 82 components and 0.113545 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.483 mas, bmaj=18.29 mas, bpa=-18.16 degrees ! Estimated noise=1058.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000677114 Jy ! Component: 100 - total flux cleaned = -0.000728049 Jy ! Component: 150 - total flux cleaned = -0.000728455 Jy ! Component: 200 - total flux cleaned = -0.000654075 Jy ! Total flux subtracted in 200 components = -0.000654075 Jy ! Clean residual min=-0.004473 max=0.005625 Jy/beam ! Clean residual mean=0.000024 rms=0.001392 Jy/beam ! Combined flux in latest and established models = 0.11289 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 89 components and 0.11289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141901Jy sigma=0.000623 ! Fit after self-cal, rms=0.141725Jy sigma=0.000623 wmodel J1736-3400_S_2017_10_09_pus_map.mod ! Writing 89 model components to file: J1736-3400_S_2017_10_09_pus_map.mod wobs J1736-3400_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1736-3400_S_2017_10_09_pus_uvs.fits wwins J1736-3400_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1736-3400_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251953 Jy ! Component: 100 - total flux cleaned = 0.00436674 Jy ! Component: 150 - total flux cleaned = 0.00572158 Jy ! Component: 200 - total flux cleaned = 0.00681345 Jy ! Component: 250 - total flux cleaned = 0.00788645 Jy ! Component: 300 - total flux cleaned = 0.00851188 Jy ! Component: 350 - total flux cleaned = 0.00909858 Jy ! Component: 400 - total flux cleaned = 0.00965177 Jy ! Component: 450 - total flux cleaned = 0.0101742 Jy ! Component: 500 - total flux cleaned = 0.0106699 Jy ! Component: 550 - total flux cleaned = 0.0109989 Jy ! Component: 600 - total flux cleaned = 0.0111775 Jy ! Component: 650 - total flux cleaned = 0.0113055 Jy ! Component: 700 - total flux cleaned = 0.0115099 Jy ! Component: 750 - total flux cleaned = 0.0115486 Jy ! Component: 800 - total flux cleaned = 0.0117406 Jy ! Component: 850 - total flux cleaned = 0.0119271 Jy ! Component: 900 - total flux cleaned = 0.0121435 Jy ! Component: 950 - total flux cleaned = 0.0122829 Jy ! Component: 1000 - total flux cleaned = 0.0125216 Jy ! Component: 1050 - total flux cleaned = 0.0127212 Jy ! Component: 1100 - total flux cleaned = 0.0130131 Jy ! Component: 1150 - total flux cleaned = 0.013267 Jy ! Component: 1200 - total flux cleaned = 0.0134224 Jy ! Component: 1250 - total flux cleaned = 0.0136355 Jy ! Component: 1300 - total flux cleaned = 0.0137554 Jy ! Component: 1350 - total flux cleaned = 0.0139894 Jy ! Component: 1400 - total flux cleaned = 0.0141613 Jy ! Component: 1450 - total flux cleaned = 0.0143018 Jy ! Component: 1500 - total flux cleaned = 0.0145231 Jy ! Component: 1550 - total flux cleaned = 0.0146584 Jy ! Component: 1600 - total flux cleaned = 0.0147384 Jy ! Component: 1650 - total flux cleaned = 0.0148964 Jy ! Component: 1700 - total flux cleaned = 0.0151288 Jy ! Component: 1750 - total flux cleaned = 0.0153321 Jy ! Component: 1800 - total flux cleaned = 0.0155824 Jy ! Component: 1850 - total flux cleaned = 0.0158292 Jy ! Component: 1900 - total flux cleaned = 0.0160242 Jy ! Component: 1950 - total flux cleaned = 0.0162643 Jy ! Component: 2000 - total flux cleaned = 0.0164538 Jy ! Component: 2050 - total flux cleaned = 0.0166174 Jy ! Component: 2100 - total flux cleaned = 0.0167101 Jy ! Component: 2150 - total flux cleaned = 0.0168697 Jy ! Component: 2200 - total flux cleaned = 0.0169374 Jy ! Component: 2250 - total flux cleaned = 0.0170488 Jy ! Component: 2300 - total flux cleaned = 0.0170485 Jy ! Component: 2350 - total flux cleaned = 0.0170921 Jy ! Component: 2400 - total flux cleaned = 0.0171354 Jy ! Component: 2450 - total flux cleaned = 0.0171779 Jy ! Component: 2500 - total flux cleaned = 0.0172413 Jy ! Component: 2550 - total flux cleaned = 0.0172831 Jy ! Component: 2600 - total flux cleaned = 0.0173663 Jy ! Component: 2650 - total flux cleaned = 0.0174282 Jy ! Component: 2700 - total flux cleaned = 0.0174896 Jy ! Component: 2750 - total flux cleaned = 0.0175101 Jy ! Component: 2800 - total flux cleaned = 0.0175504 Jy ! Component: 2850 - total flux cleaned = 0.0175704 Jy ! Component: 2900 - total flux cleaned = 0.0175705 Jy ! Component: 2950 - total flux cleaned = 0.0175708 Jy ! Component: 3000 - total flux cleaned = 0.0175903 Jy ! Component: 3050 - total flux cleaned = 0.0176098 Jy ! Component: 3100 - total flux cleaned = 0.0176674 Jy ! Component: 3150 - total flux cleaned = 0.0177246 Jy ! Component: 3200 - total flux cleaned = 0.0177055 Jy ! Component: 3250 - total flux cleaned = 0.0177999 Jy ! Component: 3300 - total flux cleaned = 0.0178563 Jy ! Component: 3350 - total flux cleaned = 0.0179311 Jy ! Component: 3400 - total flux cleaned = 0.0179868 Jy ! Component: 3450 - total flux cleaned = 0.0179868 Jy ! Component: 3500 - total flux cleaned = 0.0180051 Jy ! Component: 3550 - total flux cleaned = 0.0180235 Jy ! Component: 3600 - total flux cleaned = 0.0179868 Jy ! Component: 3650 - total flux cleaned = 0.0180232 Jy ! Component: 3700 - total flux cleaned = 0.0180049 Jy ! Component: 3750 - total flux cleaned = 0.0179507 Jy ! Component: 3800 - total flux cleaned = 0.0179326 Jy ! Component: 3850 - total flux cleaned = 0.0179687 Jy ! Component: 3900 - total flux cleaned = 0.0179327 Jy ! Component: 3950 - total flux cleaned = 0.017897 Jy ! Component: 4000 - total flux cleaned = 0.0179505 Jy ! Component: 4050 - total flux cleaned = 0.0179149 Jy ! Total flux subtracted in 4096 components = 0.0178971 Jy ! Clean residual min=-0.000998 max=0.001066 Jy/beam ! Clean residual mean=0.000019 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.130788 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 397 components and 0.130788 Jy ![Exited script file: muppet] wmap "J1736-3400_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.483 x 18.29 at -18.16 degrees (North through East) ! Clean map min=-0.0025444 max=0.066466 Jy/beam ! Writing clean map to FITS file: J1736-3400_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0664661 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000337791 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.52465 1.52465 3.04929 6.09858 12.1972 24.3943 48.7887 97.5773 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.066 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.483 x 18.29 at -18.16 degrees (North through East) ! Clean map min=-0.0025444 max=0.066466 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1736-3400_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:17:01 2019